Error restarting OBIEE services after deploying a RPD.

Hi all,
I have recently performed OBIEE installation and, when a repository is deployed and all services restarted comes an error like this one and BI Server status is down:
Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obis1; msg 0 of 1 processes started.
OBIEE version is 11.1.1.6 and the unique RPD that works is the sample one, any others fail during the restart process.
I have been thinking that maybe it was a logging error but I am not sure due to the last actions I performed, which have been those:
- Create a new user in the Console
- Create a new repository and give the username created before and its password.
Can you help me please?
Regards,
Borja M.

Hi,
Thanks for quick answering, RPD consistency is checked and OK, so that is not the problem. RPD was also renamed and deployed again, throwing OBIEE the same error.
There is something particular related to this problem, any RPD works properly except of the one installed with the OBIEE software. I mean, maybe the error is always the same, or it is a configuration error, but I am not able to fix it.
Regards,
Borja

Similar Messages

  • Error restarting services after deploying a RPD.

    Hi all,
    I have recently performed OBIEE installation and, when a repository is deployed and all services restarted comes an error like this one and BI Server status is down:
    Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obis1; msg 0 of 1 processes started.
    OBIEE version is 11.1.1.6 and the unique RPD that works is the sample one, any others fail during the restart process.
    I have been thinking that maybe it was a logging error but I am not sure due to the last actions I performed, which have been those:
    - Create a new user in the Console
    - Create a new repository and give the username created before and its password.
    Can you help me please?
    Regards,
    Borja M.

    Think this may be the wrong place to be posting the question about BI

  • Restart Systemd service after laptop resume

    Hi!
    After resume my laptop (from suspend, I've no tried hibernation) I need to restart NetworkManager service. How can I do this automaticaly?, I've searched in google and Systemd documentation but I have not a clear idea about how to do it.
    thanks

    Gazpacho wrote:
    lucke wrote:As boast said, you can make pm-utils run "systemctl restart networkmanager.service" after resume for you. https://wiki.archlinux.org/index.php/Pm … _own_hooks
    Sorry (to boast too), you are right. I've read the wiki and created a hook, now NM restarts after resume. Thanks!
    And now I've discovered that my computer only suspends the first time. Second time nothing happens when I close the tap, execute pm-suspend or the KDE menu option suspend to ram
    If you have any idea it is welcome. If not I will mark the thread as solved in a couple of days and search in forums and wiki.
    this usually happens when your hook doesn't exit. pm-suspend never finishes because it's waiting for the hook to exit and the second pm-suspend will block until the other pm-suspend is finished. Please post your hook.

  • Error In enterprise Manager while deploying New RPD

    Hi all,
    When i was deploying new RPD , BI publisher and Oracle RTD status shows down (under internal Applications)
    Can any one please help me out this problem.
    Thanks in Advance
    Satish

    Thanks for your replies !!
    In any of the RPD deployments I'm getting the same error , not for some particular RPD .
    FYI , yesterday (before this issue) I had a issue with starting presentation services , so as adviced in forum I replaced the files sawguidstate and sawguidstate.atrin the location:
    <Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
    with the same files from a backup or from another working OBIEE 11g (11.1.5)instance.
    plese refer : Re: Unable to start presentation services , in OBIEE 11g
    Is this causing the deployment issue ?

  • Error executing the Query after deploying and executing the application in WLS 6.1 SP3

    Hi,
    We are trying to run a application by deploying a war file on Web Logic Server
    6.1 SP3. After deploying and at the time of execution of the application, the
    server console displays this error message
    java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
    [0], [], [], [], [], [], []
    While debugging thru the application we found that this error comes at the time
    of execution of the query thru the Statement.executeQuery method of java.sql.Statement
    class.
    This same application when deployed on Web Logic Server 8.1 runs perfectly, without
    any hitches.
    Please, provide me the solution to this asap.

    Look for sometime around November. No exact date.
    Eric
    "Dominic Tulley" <[email protected]> wrote in message
    news:[email protected]..
    Thanks Eric,
    you know what I'm going to ask next right?
    Any ideas when SP4 comes out?
    Cheers,
    -Dominic
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]..
    The next version of Apache that we will support will be 2.0.42/2.0.43
    and
    the module for that will be included in the next Service Pack for6.1(SP4)
    and 7.0(SP2).
    The problem with Apache 2 is that when a new release comes out a newmodule
    needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
    case.
    Regards,
    Eric
    "Dominic Tulley" <[email protected]> wrote in
    message
    news:3da3f246$[email protected]..
    I'm trying to set this up (initially just apache in front of a single
    WLS
    server but ultimately I want to put it in front of a cluster).
    I've installed Apache 2.0.40.
    I've copied the mod_wl_20.so file into the apache modules folder.
    I've edited the httpd.conf file and added the line:
    LoadModule weblogic_module modules/mod_wl_20.so
    When I run apache -t to check the configuration I get the following:
    C:\Program Files\Apache Group\Apache2\bin>apache -t
    Syntax error on line 173 of C:/Program Files/Apache
    Group/Apache2/conf/httpd.conf:
    Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
    server: The specified procedure could not be found.
    So what's going on here?
    Looking at previous postings it sounds like there's an issue with
    versions
    of apache after 2.0.39 but I can't find a download for that version.Also,
    it sounded like the issues were for WLS 7, not 6.1. Can this work
    with
    2.0.40 or am I wasting my time?
    If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
    message that has been mentioned in this group already.
    Any suggestions appreciated,
    -Dominic

  • IO Error exporting to PDF after deployment to WAS 6 (using RAD7)

    <p>Hello,</p><p>I have been using the new CR4E that I downloaded and installed to IBM&#39;s RAD 7  - My reports export to PDF and display beautifully from my local WAS 6 test server - but no luck after deploying to my production WAS 6 server.  I&#39;ve published both from inside RAD7 and exported the entire EAR.  Both methods result in this error when I run my test report (only one text field).:  <table border="0" cellspacing="0" cellpadding="5"><tbody><tr><td><span class="crExceptionText">"An error occured while exporting the report" </span></td></tr></tbody></table></p><p>  I&#39;m stuck!  </p><p>jpe.log bits for the Test.rpt show:</p><p>10 Apr 2007 14:41:59 [WebContainer : 1] DEBUG com.crystaldecisions.reports.exporters.format.page.pdf.b - PdfExporter: PdfDocumentModeller.finishJob<br />10 Apr 2007 14:41:59 [WebContainer : 1] INFO  com.crystaldecisions.reports.exporters.destination.disk.c - Disk Exporter: verifying export to destination<br />10 Apr 2007 14:41:59 [WebContainer : 1] INFO  com.crystaldecisions.reports.exporters.destination.disk.c - Disk Exporter: verifying export to destination<br />10 Apr 2007 14:41:59 [WebContainer : 1] ERROR com.crystaldecisions.reports.exporters.destination.disk.c - Disk Exporter: no output file was created by an exporter<br />10 Apr 2007 14:41:59 [WebContainer : 1] ERROR com.crystaldecisions.reports.exporters.destination.disk.c - Disk Exporter: no output file was created by an exporter<br />10 Apr 2007 14:41:59 [WebContainer : 1] ERROR com.crystaldecisions.reports.exporters.format.page.pdf.b - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export<br />java.lang.IllegalArgumentException<br /> at java.lang.Throwable.<init>(Throwable.java:180)<br /> at java.lang.Exception.<init>(Exception.java:29)<br /> at java.lang.RuntimeException.<init>(RuntimeException.java:32)<br /> at java.lang.IllegalArgumentException.<init>(IllegalArgumentException.java:26)<br /> at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)<br /> at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)<br /> at com.crystaldecisions.reports.a.e.if(Unknown Source)<br /> at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)<br /> at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)<br /> at com.businessobjects.reports.sdk.b.b.int(Unknown Source)<br /> at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)<br /> at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)<br /> at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)<br /> at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)<br /> at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br /> at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)<br /> at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)<br /> at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)<br /> at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)<br /> at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)<br /> at com.crystaldecisions.report.web.event.br.a(Unknown Source)<br /> at com.crystaldecisions.report.web.event.w.a(Unknown Source)<br /> at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)<br /> at com.crystaldecisions.report.web.event.av.a(Unknown Source)<br /> at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)<br /> at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)<br /> at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)<br /> at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)<br /> at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)<br /> at com.businessobjects.samples.JRCHelperSample.exportPDF(JRCHelperSample.java:471)<br /> at com.ibm._jsp._TestViewer._jspService(_TestViewer.java:101)<br /> at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:91)<br /> at javax.servlet.http.HttpServlet.service(HttpServlet.java:851)<br /> at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1248)<br /> at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:381)<br /> at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117)<br /> at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:125)<br /> at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:264)<br /> at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3003)<br /> at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:221)<br /> at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:210)<br /> at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1761)<br /> at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:83)<br /> at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:422)<br /> at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:319)<br /> at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:288)<br /> at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:207)<br /> at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:109)<br /> at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:537)<br /> at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:593)<br /> at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:946)<br /> at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1038)<br /> at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1470)<br />10 Apr 2007 14:41:59 [WebContainer : 1] ERROR com.crystaldecisions.reports.exporters.format.page.pdf.b - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export</p><p>Thanks!  Terese</p>

    <p>Yes, I checked the permissions and the process does have write permission.u00C2  Just to be sure, I then changed the Temp directory to the process&#39; home directoryu00C2 and had the same result.u00C2  When the report is run on the TEST platform the log shows this:</p><p>DEBUG com.crystaldecisions.reports.formatter.formatter.objectformatter.containerformatter - ADDING FORMATTED OBJECT TO CONTAINER : Formatted section object (ReportHeaderSection1 : Report Headeru00C2  : section = SectionCode:<kind=reportAreaPair><groupN=0><isHeader=true><sectionN=0>, printRecordNumber = 0, pageN = 1</p><p>"ADDING FORMATTED OBJECT TO CONTAINER" never occurs on my development server - but there is no error inu00C2 the log, and an .ssd file appears in the temp directory, and then I get the error described above.u00C2  u00C2 What else should I try?</p><p>u00C2 Terese</p>

  • Have to restart VPN service after restarting macmini

    Hello,
    i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
    When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
    After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
    Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
    If you need further information please reply, i will hand it in immediately.
    FYI:
    I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
    kind regards
    Marko

    Hello,
    i am using a mid2011 macmini with Lion Server (10.7.2-Build 11C74) loaded over the Appstore, connected to an Airport Extreme (FW 7.6). I configured the VPN service in the Server settings and forwarded the profile to the clients. VPN connection works just fine.
    When i restart the macmini none of the clients are able to connect with the VPN Service. Other services are running without any problems (screensharing, filesharing,...), but i cannot connect with the VPN service through any client.
    After i restart the VPN Service (switch off and back on) in the Server App on the macmini it works again.
    Is anyone experiencing similar behaviour with the VPN service after a restart of the server? Has anyone suggestions how to get the VPN service working even after a restart without switching it off and on again?
    If you need further information please reply, i will hand it in immediately.
    FYI:
    I did make a complete clean install of the Server, without import of the timemachine backup to ensure the system is "clean".
    kind regards
    Marko

  • Error restarting OBIEE 11g services

    Hi,
    I am getting an error to restart services in obiee11g in unix server.
    There are couple of errors like :
    1.Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obips1; msg: 0 of 1 processes started.
    2.Error in starting component: oracle instance: instance1, component: coreapplication_obips1
    3.MBean operation failed.
    Any suggestion how to resolve.
    Thanks,
    Tataji

    Hi Tataji,
    Can you paste error logs from Adminserver.log and Biserver.log files
    Regards,
    Dpka

  • Runtime error saying missing iview after deployment

    Hi all gurus!
    A very irritating problem is annoying the hell out of me. The background: as an experiment I downloaded and took a copy for safety reasons of the com.portal.navigation.toolarea file. I then edited the jsp file in one of the copies and deployed the result into the portal and emediately got a runtime error. Not very clever to edit the SAP standard file but as I mentioned I took a copy for precaution and deployed that one back into the portal. But now for the problem: I still get the same runtime error!
    The error message is as follows:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.toolAreaiView
    Component Name : null
    Page could not create the iView.
    See the details for the exception ID in the log file
    It seems like some connections have been broken. What do I have to do in order to restore everything? I have checked at the repository at the portal server itself and the folder with the original content is to be found there, that is the jsp-file is the unedited one.
    Any ideas? I think it's just some standard procedure I have to do but I don't know what to be honest.
    Best regards
    Benny Lange

    Hi,
    As you have the original backed up par file do the following:
    1. Goto Administration Console and undeploy the project
    System Administration-> Support-> Portal Runtime-> Administration Console
    2. Do the offline undeploy as suggested below.
    3. Copy the backed up par file into folder ..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    4. Restart your server
    5. After restart, check in folder ..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    You should see that your par file is renamed to par.bak
    Offline undeployment:
    Here is the way you can undeploy your par file manually:
    Remove your par.bak files from:
    ..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    and
    ..\usr\sap\<SID>\<JC-->\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\temp
    Mostly the par.bak will be present either in pcd or temp folders but not in both.
    ex: C:\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
    Greetings,
    Praveen Gudapati

  • Error in /LogoPage.html  after deploying SAP MII 14.0 SP5

    Hi Experts,
    I am using SAP EHP1 for NW 7.3 SP07. Recently I upgraded from SAP MII 14.0 SP04 patch 5 to SP05 patch 2.
    After Upgrading I am getting many issues as below:
    1. When opening "http://hostname:port/XMII/" as file "/LogoPage.html" does not exist. When I checked the file its not exist in the server.
    2. When opening web pages I am getting java alert as "The application contains both signed and unsigned code"like that.
    I am using JRE v 1.6.0_21.
    Is that problem with the Patch that I deployed or any other issue.
    Please let me know?
    Regards
    G.Partheeban

    Hi Experts,
    I tried deploying with SUM,JSPM and telnet but no use. The file is not deployed properly. I guess this is the patch issue.
    I copied the Logopage and other file missing. Now the issue "1" is fixed but I am getting the below
    2. When opening web pages I am getting java alert as "The application contains both signed and unsigned code"like that.
    I am using JRE v 1.6.0_21.
    I also tried to revert back to SP04 using JSPM with the command "UpdateAll" and "UpdateSameand Lower" version. Can any one please suggest me how to revert back or how to solve the above errors?
    Regards
    G.Partheeban

  • Mac Mini Server VPN requires restart of service after each reboot

    Mac mini Server (Late 2012)
    OS X 10.8.4
    After a reboot, when viewing in Server.app, VPN service is turned on, however no connections can be made until the service is turned off then back on again.
    VPN service log entry shows "Listening for connections..." but doesn't allow incoming VPN calls until the service is restarted.
    Anyone else having similar issues or have suggested solutions?
    Thanks much!
    Jim

    Try this
    https://discussions.apple.com/message/22564125#22564125

  • Restart of Services after changing instanceconfig.xml

    Hello together,
    is somebody able to explain me which Services/WEBServer I have to resart after I made some changes in the instanceconfig.xml
    Regards,
    Stefan

    Hi Stefan,
    You will need to restart the Oracle BI Server service aswell as the BI Presentation Server service.
    Rgds
    Ed

  • Autentication error in Web Service after Login Module

    Hi Experts,
    I am getting a failed autentication when i try to access a web service. This is my scenario:
    I have developed my own login module using JAAS. When i call a web service, the login module is executed, then it validate the credencials and make the authetication true. After that the web service is called. The web Service is mark as user/password authetication. But i always get this error:
    Authentication for web service UtilityService, configuration UtilityService using security policy BASIC___ws failed: Login failed.. (See SAP Note 880896 for further info).
    Just for you know, the credentials taht i use in login modulo isn't the user of UME. I use user store in another user store. I fthe credential is correct pass to the Principal an user of UME. To login stack is right when pass to login module:
    LOGIN.OK
    User: tecbmmab
    IP Address: 192.168.14.48
    Authentication Stack: tridmen.com.br/pegasus~ear*pegasus
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   SUFFICIENT  ok          false      false                
    2. br.com.tridmen.login.ERPCEHeaderLoginModule                             REQUISITE   ok          true       true                 
            #1 Client = 800
            #2 Destination_reference = CUSTOM_DEST
            #3 SysId = DE1
            #4 SysNum = 00
            #5 TargetHost = tecs220
            #6 TrATicket = TRATICKETCTRL
    Central Checks                                                                                true
    After this, the error mention above, of web service happen.
    As my knowledge, when i call the web service i already have the session autenticate with login module. But this is not happen.
    Could someone help with this question?
    Best regards
    Marcos Brandã

    Hi,
    in what order did you specify your login modules? In that error message it looks like it's in wrong order. Your custom module should be first with SUFFICIENT and then standard user name/password with REQUISITE.
    Cheers

  • Is it mandatory to Restart all services after making Business Rule change?

    Hi,
    I know it may be a easy one but wanted to know is it mandatory to restart all the Planning and Essbase services if we make any changes in the Business rule
    in 9.3.1
    -KP

    No you shouldn't have to restart after rule change.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error in Gateway service after transport

    Hello All,
    Currently I am facing  issues in the quality gateway server with the Services. The services are running fine in the development server , but when it is transported in the quality server and trying to run the service it is giving an error
    Model 'ZXXX_WORK_CENTER_MDL_0001_BE ' contains error.Contact Administrator.
    If anyone has faced this issue and know the resolution please let me know.
    Regards,
    Arijit

    Hello All,
    The issue is resolved now. the problem was due to RFC connectivity problem with the backend ECC server.
    Thanks,
    Arijit

Maybe you are looking for

  • Unable to switch tty7 tty1 - start another X - (GPU lockup) /e5x

    When boot finish, I can swhitch to tty1 but not back, and than I can not switch anythig, keyboard does nothing and I have to hard reset. Also can not run another xserver, the same happen. But it reboot, if I run another x in script while the script r

  • Module pool program, table control edit

    Hi, I am doing module pool programming with table control.  I have a table control on my screen which is assigned to scarr table with ‘New’, ‘Modify’, ‘Save’, and ‘Delete’ buttons.  When I click on ‘New’ and ‘Save’, the new record is adding to the ta

  • Stuck at Mac OS X

    After the upgrade of 10.4.9 combo, my PowerBook G4 cant start up. I have did the archieve and install, did the repair disk, but still cant get thru the Mac OS X screen. Any idea please. thanks

  • Permissions not being inherited to subfolders

    I have recently formatted a 1TB WD drive in Mac OS Extended (Journaled) format. The pemissions are set to read + write for all users on the root of the drive. However when i create a new folder it does not inherit the same permissions! The drive will

  • Looking for a  technical book copy editor who can work in FM10

    I'm getting close enough on the update of my (newly self-published) edition of my book that I need to find a copy editor.  I live in NYC so finding a copy editor is no problem, but since I'm writing the book in FM10, the easiest thing would be to fin