Error RFC Connection

Hi Gurus,
I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
EntrSist.     Error de conexión
Det.error     / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
Det.error     ERROR: SAP gateway connection failed. Is SAP gateway started?
Det.error     LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
Det.error     COMPONENT: CPIC
Det.error     COUNTER: 6
Det.error     MODULO:
Det.error     LINE:
Det.error     CÓD.RETORNO: 236
Det.error     SUBRC: 0
Det.error     RELEASE: 700
Det.error     TMP.: Tue Aug 31 11:13:57 2010
Det.error     VERSIÓN:

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

Similar Messages

A *** ERROR = RFC ====== connection closed (no data)

I trace data On Instance DEV_W0 the had Error as below
A *** ERROR => RFC ======> connection closed (no data)
Please Kindly verify the cuase and recommend in this issue .
Edited by: SoeyTH on Dec 6, 2010 3:38 PM

You need to proivde more logs to find what caused.
Is you SAP up?

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

IDES Installation error (RFC connection error)

Hi
Would someone help me?
I have a problem while installing the IDES ,ECC 6.0 with MaxDB. (Linux)
The installaiton of CI is holding in the phase " Checking the DDIC password " and it seems a loop.
Looking through sapinst.log , there is some messages.
These messages are showing as a loop.
INFO 2008-06-25 13:46:09
RFC connection information checked successfully.
ERROR 2008-06-25 13:47:10
FRF-00007 Unable to open RFC connection.
ERROR 2008-06-25 13:47:10
MUT-03025 Caught ERfcExcept in Modulecall: Timeout.
And I tried to logon ,but I didn't because of the timeout.
The window says "waiting for response" and the logon is over with a error,timeout.
Any hints and advice would be helpful for me ,thanks.

Hi,
1. Check dailog work processes through OS level
2. Check all profile parameters through OS level and change it according.
3. Then try for sap logon with 000 client and password.
After login into sap, check RFC connection within the system. using by tcode sm59.
4. Finally you can check also MaxDB services at OS level.
Regards,
Srini Nookala
Edited by: Srini Nookala on Jun 28, 2008 6:11 AM

Error: RFC connection host not found

Dear all,
I have configured the SLD and JCO destinations also. But when i test connection system throws the error.
<b>com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=thr3dev1 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR service 'sapmsDEV' unknown TIME Tue Oct 11 19:03:14 2005 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 MODULE ninti.c LINE 494 DETAIL NiPGetServByName2: service 'sapmsDEV' not found SYSTEM CALL getservbyname_r COUNTER 1</b>
Pls suggest something. Can anybody provide the step check list.
Regds,
Anup

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

Installation Error RFC connection with ddic user

Hi
when i am installating IDES ECC6.0 iam unable to continue the installation
due to ddic password. i have tried with master and standard password but no use.
i have tired to logon to the system using sap* user . But it also failed to logon .
could any body help me this issue.
Thanks in advance.

Hi Kumar,
When you delete the user SAP*, please make sure you also add the parameter
login/no_automatic_user_sapstar = 0 to instance profile (your need to restart the SAP instance)
As NW2004S, that parameter prevent SAP* login using PASS password.
But before you do this, please just try to delete the SAP* user first and login using PASS password, if that not work than you should add the parameter and restart the SAP.
Hope this help.
FS

RFC Connection error in BW

Hi,
Source system error.
BW
RSA1Source System (Context Menu) Check
Error: RFC Connection Check failed
Diagnosis
You tried to logon to check the connection to the source system. This was not successful.
System response
Name or password is incorrect. Please re-enter
Procedure
Check the BW destination in the source system. In particular with SAP connections make sure that you have entered the correct password.
How shall I proceed?
I checked User ID in Source System.
Thanks

Hi,
Its simple, when the BWALEREMOTE user was setup in your system, the password provided was incorrect or the user ID with that password might have been locked.
Using transaction SM59 you can setup the RFC Destinations. So, go to SM59 check the user ID and give the correct password.
Hope this solves your concern,
Regards,
Habeeb

RFC connection Error in SLDCheck

Hi All,
I am trying to logon to Integration builder for that i getting the ESR builder address is not maintain. for this i have chk in SLDCheck t code ,there i am getting LCRSAPRFC connection error.I have test the RFC connection in that i am getting the
the error in register server program
Error Details     ERROR: program LCRSAPRFC_XID not registered
now wht i have to do for troubleshooting
Regards

Thanx for reply
when I test connection to Connection Test SLD_UC     error
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program SLD_UC not registered
Error Details     LOCATION: SAP-Gateway on host sapdevpi / sapgw00
Error Details     DETAIL: TP SLD_UC not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 62
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1778
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:05:42 2010
Error Details     VERSION: 2
RFC SLD_UC is connection T
Gateway Host sapdevpi
Gateway server sapgw00
same error with
Connection Test SLD_NUC
Connection Test SAPSLDAPI   ( program Id SAPSLDAPI_DPI )
Connection Test SAPJ2EE
In Connection Test LCRSAPRFC error program id LCRSAPRFC_DPI
Logon     Cancel
Error Details     max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
Error Details     ERROR: max no of 100 conversations exceeded
Error Details     LOCATION: CPIC (TCP/IP) on host sapdevpi
Error Details     COMPONENT: CPIC (TCP/IP) with Unicode
Error Details     COUNTER: 82
Error Details     MODULE: r3cpic_mt.c
Error Details     LINE: 10791
Error Details     RETURN CODE: 466
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Fri Jan 8 11:12:56 2010
Error Details     VERSION: 3
Regards
shahid

Rfc connection error to saposs

Hi
while testing the rfc connection to saposs msg comes timeout occured
Error: timeout occured
Location : Saprouter 37.11 on SAPDEV
Componenet: NI
Counter : 1460
Return code: -93
Subrc: 0
Release : 640
Version : 37
Plz suggest me.

> Location : Saprouter 37.11 on SAPDEV
is the saprouter running on that box and is that box able to connect/ping sapserv?
Markus

RFC connection error for PS_ACCESS_1 and PS_ACCESS_2

dear all,
i have created the RFC destination PS_ACCESS_1 and PS_ACCESS_2 with TCP/IP. i also installed WDPS* files in *sapgui\ps\access folder. now i m checking for 'TEST CONNECTION' in sm59 for PS_ACCESS_1 and PS_ACCESS_2 but it is giving 'Error when opening an RFC connection' this error. pls suggest the solution for this problem.
am i missing any other settings? i m using SAP ECC 6.0. is it comfortable with this? is it required any configuration from basis side?
regards,
vicky.

HI,
please check the RFC Trace File at SM59 -> RFC -> Show trace file.
For better tracing delete the Trace File first and recheck the RFC Dest.
Regards,
Gordon

RFC connection Error

Dear All,
    when i connect our BI System to R/3 system via RFC in SM59 ,i am getting following error in BI system and also The problem occur in particular instance .(Other instance working fine in BI system)
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host chwslp05 / sapgw01
Error Details     DETAIL: no connect of TP sapdp15 from host sapp3b.eame.syngenta.org after 20 s
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 162003
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1973
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Mon Apr 27 14:29:33 2009
Error Details     VERSION: 2
Any one please suggest.
Thanks,
Thirumoorthy.

mostly your gateway servicve is not working check smgw tcode on that instance
you can do this goto sm59->select the instace execute tcode smgw
easy way is restart the instance
it will start working
Samrat

RFC Connection error between R/3 4.7 & ECC 6.0

Hi all,
I m receiving the following error when i test the RFC connection between the mentioned systems..
/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service
DEV_W0 file contains the following information:
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service 'sapgw01' unknown
M *
M * TIME        Wed Apr 22 03:59:51 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * MODULE      ninti.c
M * LINE        463
M * DETAIL      NiPGetServByName: service 'sapgw01' not found
M * SYSTEM CALL getservbyname
M * COUNTER     2704
M *
M *****************************************************************************
M
A RFC 2272 CONVID 90657609
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {8E460E4B-7D68-4FAE-A9BD-E212DAFA6A8E})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Could any one pls. help me..
Thanks & Regards, Subbu

Hi all,
Thanks for ur replies.. I have added as u mentioned but i m receiving the below error??? Could u pls. suggest??
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service '?' unknown
M *
M * TIME        Wed Apr 22 04:58:46 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * COUNTER     2733
M *
M *****************************************************************************
M
A RFC 2272 CONVID 94231859
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {34E2D1F9-B021-4B04-BD35-16E04AF4BD11})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
thanks,
Subbu

RFC Connection Error (for end-to-end Monitoring)

Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AM

Thanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

RFC connection error (VPN-access)

Hi!
I have the following error for the RFC connection:
The RFC connection is setup as follows.
/H/10.101.7.1/S/3299/H/10.151.6.194
10.101.7.1 = IP of our SAP Router
10.151.6.194 = IP of customer system
The RFC connection is established:
SAP Router (intern) --> Target systems
The error is:
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner not reached (host 10.151.6.194, service sapgw20)
Error Details     LOCATION: SAP-Gateway on host bksapp01 / sapgw20
Error Details     DETAIL: NiPConnect2
Error Details     CALL: SiPeekPendConn
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 592
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 8777
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 640
Error Details     TIME: Thu Jun 19 10:42:42 2008
Error Details     VERSION: 37
Can some one help to solve the problem?
Thank you very much
Thom

Hi
Change the saprouter string to
/H/10.101.7.1/S/3299/H/10.151.6.194/S/32<system number>
and try !!!

Error RFC Connection

Similar Messages

Maybe you are looking for