Error -RFC_ERROR_SYSTEM_FAILURE- There is already a line with the same key.
Hi,
While executing a report in BEx am faced with the error above. It ocurs when i take a drill down on Purchase order number field ( free charact). I tried by inserting this info-object into rows but still teh same error occurs and the connection with teh server is snapped.
The said field is also an user input field and the variable does not seem to the working as data other than the input values is fetched. There is a dump in ST22 with teh following error analysis-
You wanted to add an entry to table
"\FUNCTION-POOL=RRK0\FORM=EMPTY_COPY_DAT_N\DATA=<L_TSX_CSKID>[2
you declared
with a UNIQUE KEY. However, there was already an entry with the
same key.
This may have been in an INSERT or MOVE statement, or within a
SELECT ... INTO statement.
Plz guide
Regards,
Saurabh Diwakar
Hi,
take a look at this SAP note:
Term ITAB_DUPLICATE_KEY; SAPLRRK0; empty_copy_dat_n_01
SAP Note Number: [966238 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393636323338%7d]
Regards
Andreas
Similar Messages
-
Query 0: Runtime error There is already a line with the same key. with para
Dear all,
I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
2. Error while reading data; navigation is possible
3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Error 1
Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
Message no. DBMAN428
Error 2
Error while reading data; navigation is possible
Message no. BRAIN289
Diagnosis
An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
Procedure
You can continue to navigate or return to the last navigation step.
Error 3
>> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
Message no. RS_EXCEPTION301
Diagnosis
En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
May I know what causes this error and how to troubleshoot it?
Thank you.Venkat,
You are either a genius or working for SAP.
In any case, your solution solved my problem.
Thanks heaps! -
DTP error: No Message: Filter Out New Records with the Same Key
Hello SDN,
I have looked up solutions for this problem, but didnt find anything suitable. I am getting this error in multiple places: when i load pure master data into IOs like 0VENDOR, 0PLANT etc. or when I load DSOs like 0FIAP_O03.
When I checked the load in sdn, one of the solutions was to apply note: 1489178 , but in this case, the user had nothing selected in his 'semantic key' list. Whereas, in my case.. 0PLANT is checked ...eventhough the other fields are disabled. So, I think my DTP is accurate.. as 'plant' is the only key field here. But it still fails .. and so does 0VENDOR load. Moreover... the DSO load is crucial for our reports in Prod and its failure is a bigger issue for us.
Has anyone seen this problem? Is there another solution other than the above note?
Regards.Hello Arvind,
If I select that option, will it delete one record if it finds 2 records with the same semantic key in 1 data packet. Also, will it delete a record if it finds that there is already a record existing in the data target with the same semantic key.
I think, both of the above scenarios will result in incorrect data. From my understanding, 'Handle Duplicate Keys' is mostly used to filter out master data.. as in some instances.. you might get duplicate entries.
But, in my case, the same error is happening in the case of data load from 0fi_ap_4 --> 0fiap_o03. What happens is... the overall status of the DTP becomes green.. but when you look at details section, the process stops at this message which is in yellow. Because of this, the DTP status in the PC remains yellow.. and finally turns red.. and the PC turns red.
From my knowledge, it appears more like a bug. I was hoping to find a SAP NOTE which has some manual instructions that can resolve the issue, since the above NOTE asks for a support pack upgrade.. which would need a whole lotta testing.
Regards. -
I've created more than one Edge Animate "Object" for the website, but can't seem to get them both to load into Dreamweaver. Is it possible to have more than one "Object" on a site?
I'm using Windows 8.1I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).
-
Help! I was cruzing along just fine and went out tonight only to receive the message above:
Cannot open Page
Safari cannot open the page
The error was: "There was a problem communicating with the web proxy server (HTTP)."
I have had all the Apple iPhone phone. Have never encountered anything like this.
All systems are GO as soon as I log on to wifi.
Can anyone help, please.I am also fixed. I also loaded Onavo, but that was the other day ... this is what I did with the help of online chat with AT&T ...
I went to:
Settings
Wifi
I selected the network I was working on by hitting the blue arrow located on right side
At the detail page of that network I scolled down to the bottom to find HTTP Proxy boxes
I was on Off and changed it to Auto and it worked!
I was soo jazzed!!
Instructions said if it was already on AUTO, to change it to Manual and make your Port = 80 but I didn't have to do that!
YIPPIE!! I'm a new man!!
Go to settings -----> WI-FI -----> select the network you're using ------> hit the blue arrow located on the right-side of the network name (ie: show details of that network), this takes you to another page.
--------> at the bottom of the page you'll see "HTTP Proxy" boxes (located below the "renew lease" button) ---------------> change the proxy to AUTO. Note: if you're already at AUTO, change it to "Manual" and make your Port = 80. -
Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added
Hi,
I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added". Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal.
What should I check? Thanks.
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dm1k Medium Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace: at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
add) at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93* mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dm1k Medium ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvt6 High SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616 [sts3util.cxx:6988]
search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvi3 High Couldn't retrieve server
http://serverurl policy, hr = 80042616 [sts3util.cxx:1865] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvu0 High STS3::StoreCachedError: Object initialization failed. Message: "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
HR: 80042616 [sts3util.cxx:7083] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvg4 High Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7
[sts3util.cxx:1591] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dv5x High CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616 [sts3acc.cxx:1932] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dv3t High CSTS3Accessor::InitURLType fails, Url
http://serverurl, hr=80042616 [sts3acc.cxx:288] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvb1 Medium CSTS3Accessor::Init fails, Url
http://serverurl, hr=80042616 [sts3handler.cxx:337] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Connectors:SharePoint
dvb2 Medium CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616 [sts3handler.cxx:355] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34) 0x225C SharePoint Server Search Crawler:FilterDaemon
e4ye High FLTRDMN: URL
http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7" [fltrsink.cxx:566] search\native\mssdmn\fltrsink.cxx
04/22/2015 19:37:10.93 mssearch.exe (0x1118) 0x0628 SharePoint Server Search Crawler:Gatherer Plugin
cd11 Warning The start address http://serverurl cannot be crawled. Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content' Details: The SharePoint item being
crawled returned an error when requesting data from the web service. (0x80042616)
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6Hi,
For troubleshooting your issue, please take steps as below:
1. Try to crawl your content source using farm admin account.
2.
Disable loopback check .
3.Add reference SPS3s://WEB into your content source start addresses.
For more information, please refer to these blogs:
http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
JustinTurns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages. -
Here's the situation:
Upgrading a SharePoint Server 2010 Search Service Application dB to our SharePoint 2013 SP 1 development environment, using the Management Shell
Running the following commands:
$applicationPool= Get-SPServiceApplicationPool -Identity 'SearchService_AppPool'
$searchInst = Get-SPEnterpriseSearchServiceInstance -local
Restore-SPEnterpriseSearchServiceApplication -Name 'SearchServiceApplication' -applicationpool $applicationPool -databasename 'SearchServiceApplicationDB' -databaseserver SERVERNAME -AdminSearchServiceInstance $searchInst
Creates the search dBs (crawl, links, analytics) successfully; however, in the end, I get....
"Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed."
Looking at the ULS logs, I find the following:
Inner Exception: An item with the same key has already been added.
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.FindAndFixExistingManagedProperties() at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.InstallManagedProperties(Boolean
upgrade) at Microsoft.Office.Server.Search.Administration.OOTBSchemaDefinition.Upgrade() at Microsoft.Office.Server.Search.Upgrade.UpdateAllOOTBProperties.Upgrade() at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade()
Exception: Action 15.0.107.0 of Microsoft.Office.Server.Search.Upgrade.SearchAdminDatabaseSequence failed.
at Microsoft.SharePoint.Upgrade.SPActionSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.Upgrade() at Microsoft.Office.Server.Search.Upgrade.SearchDatabaseSequence.Upgrade() at Microsoft.SharePoint.Upgrade.SPUpgradeSession.Upgrade(Object
o, Boolean bRecurse)
Anyone encounter anything like this during their search upgrade process? I'm not honestly even sure what duplicate value to look for at this point, if I were to run a SELECT Id, ClassId, ParentId, Name, Status, Version, Properties FROM Objects on
"SharePoint_Config" in SSMS. Any insight or opinions on the matter are welcome; and thanks to those who choose to reply to this, in advance.Hi ,
You can enable the ULS log on verbose level (note, remember to reset to default level after finished troubleshooting) for more information per the following article, then check there should be more useful message for helping solve the issue.
http://www.brightworksupport.com/enabling-verbose-logging-to-compare-against-c/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/12c99279-d3aa-46de-bc57-d5d250692ff0/upgrade-of-search-service-application-from-2010-to-2013-failure?forum=sharepointadmin
https://www.simple-talk.com/blogs/2014/04/22/sharepoint-2010-to-2013-search-service-application-upgrade-issueaction-15-0-80-0-fails/http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaqHi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq -
Record filtered in advance as error records with the same key exist
Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
RajaHi
Thanks for reply
I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
Thanks in advance
Raja -
To group the lines with the same items before TO
Hello,
We use an external tool (linked to SAP WM) to prepare the orders.
When I have a order with two lines with the same item (because a line free of charge) and when I generate the Transfer Orders, I have two lines and we have to go twice to the picking...
Could you give me a solution to group the lines?
Thx in advanceHi
You have various options here depending on whether you have other middleware in place and what skills you have on-site.
How are you transferring the information to your WMS system?? Idocs / BAPI / Files ???
Mark -
Run the data copy and comments copy with the same key
I want to Run the data copy and comments copy with the same key.
I tried to challenge in the following way, but it is an error.
1. Add the process in the process chain [/ CPMB / COPY] process in the process chain that could be new to copy the chain [/ CPMB / COPY_COMMENTS] (see capture)
2. Select the newly can process chain to add a package, make a change to the script as follows:
PROMPT(RADIOBUTTON,%TARGETMODE%,"Handling of records",0,{"Copy records with match key","Copy by replacing data in same data region of Entity, Category, Time and Audit ID"},{"0","2"})
PROMPT(RADIOBUTTON,%RUNLOGIC%,"Select whether to run default logic for stored values after copying",0,{"Yes","No"},{"1","0"})
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when importing data.",1,{"Yes, check for work status settings before importing","No, do not check work status settings"},{"1","0"})
PROMPT(COPYMOVEINPUT,%SELECTION%,%TOSELECTION%,"Select the members to COPY and where to",%DIMS%,0)
INFO(%TEMPNO1%,%INCREASENO%)
INFO(%ACTNO%,%INCREASENO%)
INFO(%SELECTION_KEYDATE%,)
TASK(/CPMB/COPY_COMMENTS,SELECTION,%SELECTION%)
TASK(/CPMB/COPY_COMMENTS,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/COPY_COMMENTS,CHECKLCK,%CHECKLCK%)
TASK(/CPMB/CM_CONVERT,OUTPUTNO,%TEMPNO1%)
TASK(/CPMB/CM_CONVERT,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/CM_CONVERT,SAPPSET,%APPSET%)
TASK(/CPMB/CM_CONVERT,SAPP,%APP%)
TASK(/CPMB/CM_CONVERT,SELECTION,%SELECTION%)
TASK(/CPMB/CM_CONVERT,TOSELECTION,%TOSELECTION%)
TASK(/CPMB/CM_CONVERT,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,CHECKLCK,1)
TASK(/CPMB/CLEAR_SOURCE_CUBE,SELECTION,%TOSELECTION%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,KEYDATE,%SELECTION_KEYDATE%)
TASK(/CPMB/CLEAR_SOURCE_CUBE,DUMPLOADMODE,3)
TASK(/CPMB/APPEND_LOAD,PREPROCESSMODE,0)
TASK(/CPMB/APPEND_LOAD,TARGETMODE,0)
TASK(/CPMB/APPEND_LOAD,INPUTNO,%TEMPNO1%)
TASK(/CPMB/APPEND_LOAD,ACT_FILE_NO,%ACTNO%)
TASK(/CPMB/APPEND_LOAD,RUNLOGIC,1)
TASK(/CPMB/APPEND_LOAD,CHECKLCK,1)
TASK(/CPMB/APPEND_LOAD,KEYDATE,%SELECTION_KEYDATE%)We performed similar transfer of data from one planning model to another using DM package linked to BADI. In your scenario there is additional complexity of doing lookup from DSO and should be possible.
Also check these references for performing lookup in DSO.
abap code to populate data from DSO
something about SAP: How to look for DSO&#8217;s tables? -
Reducing time while Filtering Out New Records with the Same Key
Hi Experts,
I have an issue .. I am trying to load data into 0MATERIAL . While loading via DTP the step u201CFilter Out New Records with the Same Keyu201D takes much time for processing . For each datapackage it is taking around 30 minutes to filter out new records with the same key . While for other master data it hardly takes 5 minutes.
Any pointers how to reduce the timeu2026
Thanks in advance
SamHello,
No there is no need to do that change then.
Can you tell me are you doing a full load daily to 0MATERIAL object.
why dont you use delta.
Also if the DTP is of type FULL, then are you deleting the previous PSA requests.
Maybe you can ask the basis guys to check with a trace what is really happening on the DB side during this 30 mins and then maybe we can find the needed fix.
Regards,
Shashank -
After loading Lion, I have been getting an error message "There was a problem connecting to the server. URLs with the type "file:" are not supported." There does not seem to be any actual problem with internet connectivity, but it is persistent and annoying. Any idea of its cause and treatment?
Take a look at this link, https://discussions.apple.com/message/16156214#16156214
-
One User gets error Message saving an Incident, another user with the same rigthts not
Hi there,
We have a user sometimes getting an error message (see beyond) when saving an Incdient eg. only modified the descrition field. The user is able to create, update and resolve all other incidents. The user also may have changed this incident before.
When we use an other user with the same rigths, this user is allowed to modify the description field (and others)
We tested: The behavoir does not change for the first user, after the second user changed something.
It's not the workflow for the first assigned to date
No other user tries to use this incidents
We have a custom field, but it is not used in this case (so I know Romans SQL
http://social.technet.microsoft.com/Forums/systemcenter/en-US/401c8083-cd4d-4a74-b300-74f18caaa6a3/kb-2525307-for-2012?forum=systemcenterservicemanager)
Had a "powershell look" at the incident, but I did not see something "special" about this incident.
Anyone an idea, where to look at?
Finaly the Error Message:
Date: 11.02.2014 09:58:48
Application:
Application Version: 7.5.2905.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.UnauthorizedAccessEnterpriseManagementException: The user DOM\xxxxx does not have sufficient permission to perform the operation.
at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
at Microsoft.EnterpriseManagement.Common.Internal.ConnectorFrameworkConfigurationServiceProxy.ProcessDiscoveryData(Guid discoverySourceId, IList`1 entityInstances, IDictionary`2 streams, ObjectChangelist`1 extensions)
at Microsoft.EnterpriseManagement.ConnectorFramework.IncrementalDiscoveryData.CommitInternal(EnterpriseManagementGroup managementGroup, Guid discoverySourceId, Boolean useOptimisticConcurrency)
at Microsoft.EnterpriseManagement.ConnectorFramework.IncrementalDiscoveryData.Commit(EnterpriseManagementGroup managementGroup)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.DataAdapters.EnterpriseManagementObjectProjectionWriteAdapter.WriteSdkObject(EnterpriseManagementGroup managementGroup, IList`1 sdkObjects, IDictionary`2 parameters)
at Microsoft.EnterpriseManagement.UI.SdkDataAccess.DataAdapters.SdkWriteAdapter`1.DoAction(DataQueryBase query, IList`1 dataSources, IDictionary`2 parameters, IList`1 inputs, String outputCollectionName)
at Microsoft.EnterpriseManagement.UI.ViewFramework.SingleItemSupportAdapter.DoAction(DataQueryBase query, IList`1 dataSources, IDictionary`2 parameters, IList`1 inputs, String outputCollectionName)
at Microsoft.EnterpriseManagement.UI.DataModel.QueryQueue.StartExecuteQuery(Object sender, ConsoleJobEventArgs e)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
Patrick Wahlmüllertake a look at
this similar issue and see if the same process can help with your issue.
Maybe you are looking for
-
Crystal Reports for VS2005 causes a Redistributable error for Windows 7
HI, I believe I also have a compatibility iossue with pre-bundeled Visual Studio 2005 (VS2005) Crystal Reports and Windows 7 using an XP development environment on a virtual PC. I had built and published my VS 2005 desktop application code on a virtu
-
Can I use Standard Keyboard in Landscape/Widescreen mode?
I know there are apps that let you use a widescreen keyboard. But is there a way to use the standard keyboard that the system gives you (in Safari, Settings, etc.) in the landscape orientation? I ask this because my stepdad has huge hands and just ca
-
Do you know any independent iBooks non-fiction authors in the UK
I am looking for any indepependent UK-based non-fiction authors who have a title in the iBooks Store - preferably built using iBooks Author. It is great being an indie but it would be great to collaborate on some marketing activity, eg real life an
-
Where is the New CSS Rule button that was in the properties tab?
There used to be a plus button in the properties tab. In Dreamweaver CS6 it is gone. I loaded in a tracing image, I want to type the * tag so the image and everything else will align to the upper left coordinates 0,0. Sean
-
How can i open my iphone? the apple sign appears on screen but it keeps on logging...