Error : RGSUM could not be updated

Hi all,
When i am doing transaction J1IEX_C ( capture excise invoice) against Goods receipt during saving i am getting an error as " RGSUM could not be updated".
I checked sttings of excise & found ok.
Plz suggest some sol.
Regards,
Sandeep Sharma

yes i have check the settings of excise details

Similar Messages

RGSUM could not be updated Msg # 8I000

Hi All,
While posting J1IEX I am getting this error 'RGSUM could not be updated' Message number 8I000.
Please guide
Thanks and Regards
Pavan

Hi ,
Are u trying to cancel the excise doc?
the error is in include LJ1IEXKG1 line number 2767.
the excise doc has status cancelled and so the cummulative receipts is getting less then cummulative issues. so just check the qty in excise doc. and also try to debug to find the problem.
   IF ls_part1-status = 'C'.
      ls_rgsum-cumrcp = ls_rgsum-cumrcp - ls_part1-menge.
      IF ls_rgsum-cumrcp LT ls_rgsum-cumiss.
        MESSAGE a000(8i) WITH 'RGSUM could not be updated'. "#EC NOTEXT
      ENDIF.
      IF l_entry_found = abap_true.
        MODIFY ct_rgsum FROM ls_rgsum
            TRANSPORTING cumrcp cumiss
                WHERE matnr = ls_rgsum-matnr
                   AND exgrp = ls_rgsum-exgrp
                   AND regtyp = ls_rgsum-regtyp.
      ELSE.
        APPEND ls_rgsum TO ct_rgsum.
      ENDIF.
    ENDIF.

RGSUM could not be updated

Getting error as RGSUM could not be updated.In j1iex when we change material type from raw to consumable.in j1id they have maintained mat type as consumable which was raw earlier at the time of po creation.

Dear,
Could you please check for the application of note - 517391 in your syst
em.
If this is an account assigned PO then could you check if the table
J_1irgsum has sufficient quantity in cumulative receipts?
This error is seen only when the system is not able to find sufficient
quantity in this table.
Regards
V V

TS3694 an error message showed after verifying updates: error phone could not be updated code 6. What to do?

After backing up and updating phone top window showed updated verified commplete.
then it displayed a message sayng phone could not be updatede error 6.
Please help.

http://support.apple.com/kb/TS3694#error6
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

I tried synching my 2nd generation ipod touch and it told me to update the software. Then it said "error 37" and could not complete updating but it has left me with an ipod that is not recognised by my pc and wont turn on or anything- just black

Error 20, 21, 34, 37: These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694
You also may have to place the iPod in recovery mode. For how see:
iPhone and iPod touch: Unable to update or restore

The iPod " " could not be updated. An unknown error has occurred (1417).

This is what saved my day... I copied this from a longer reply.
"Try this: I got error 1417. The iPod "Dan's iPod" could not be updated. An unknown error has occurred (1417).
1)Plug in your iPod and wait for iTunes to tell you an update for it is available
2)Click the Install button on that dialog and keep an eye on your iPod
3)When your iPod screen switches from the flashing "Do Not Disconnect" message to the Main Menu screen, unplug the iPod, wait a couple SECONDS, plug the iPod back in
4)You should notice some slow-down in the progress meter and a new dialog box should come up and tell you your iPod is being updated and to not disconnect it until the update finishes
5)That's it. Wait for the update to finish and iTunes will re-recognize it and show its new up-to-date status."
The only thing I would add, restart your computer with the IPOD left connected. When it starts back up you are set.

Does this article contain anything useful?
(31939)

HT201413 HELP! I was updating my iphone 4S to the new IOS6 via itunes when in the in the middle of the process of actually updating the iphone OS, it suddenly returned an error - "The iPhone could not be updated. An unknown error occurred (1602)" PLEAS

PLEASE HELP!!!
I am using an HP DV9 laptop running Windows 7 Home Premium and the latest iTunes software.
I regularly synch my iphone 4S with my laptop & Outlook.
I recently got the message that an IOS6 upgrade is available & so I scheduled to apply the update.
Everything was running normally when, after the download of the update, backup of my iphone, & applying the update began when
suddenly, iTunes returned with an ERROR MESSAGE as follows:
The iPhone "Ramon's iPhone" could not be updated. An unknown error occurred (1602)
Now, my iphone is stuck with the iTunes icon and the USB image with an arrow pointing to the iTunes
icon.
WHAT DO I DO NOW?????!!!!!
Help PLEASE!!!!

I actually tried the steps below due to the error -5000 I had encountered during the previous tries updating my IOS to 5.1.1
"Perform a normal sync and check your iTunes to make sure everything was synced in the right places like the tabs at the top of your "summary" when you plug in your iPhone to iTunes. If everything is there and all the right boxes are checked for the stuff you want to save, then put your phone into recovery mode by keeping it plugged into your computer with iTunes still up and running. Next you want hold down the power button AND the home key button (the big button on the bottom part of your screen) AT THE SAME TIME. Your phone will go thru 4 different screens before you
Can let them go. U will see your normal power off slider screen, then a black screen, then a black screen with an apple logo, then finally a screen with the iTunes logo and a picture of a sync cable below it. Once you see this screen LET BOTH BUTTONS GO but not before you see this screen. Your computer will tell you that it has detected an iPhone in recovery mode, say ok. Then hit the restore button on your iTunes summary screen, it should then ask you if you want to restore from a backup and update, say yes.... And at the end of its restoring and uploading you should have iOS 5!!"
Then it proceeded to a reactivation process... =(

I have problem in itunes i updated iphone 4s and could not be updated an unknown error occurred 3194

i have problem in itunes i updated iphone 4s 5.1.1 and could not be updated an unknown error occurred 3194

Please see the More Like This section on the right.

The ipod could not be updated. An unknown error occurred (5)

the ipod could not be updated. An unknown error occurred (5)
I got this error when trying to update from 1.1.1 to 1.1.2. I dont want to go to 1.1.3 so i have been trying to upgrade by using iPhone1,11.1.2_3B48bUpdate and pressing shift then update in itunes but then it goes through all the processes and comes back with this error. It even goes into recovery mode! Can anyone help?
Thanks Sam

if itunes can no longer pickup your ipod, and you cant even do anything to your ipod, your best option is to either call apple care, or just take it to the nearest apple shop. i had a similar problem, mines currently at apple care repairs and they might just end up giving me a replacement.

An unexpected error occurred (4:190). Your firmware could not be updated, please try again.

hi
i get in my MacPro:
An unexpected error occurred (4:190). Your firmware could not be updated, please try again.
So which can i do ?
Im looking you to forward

What are you trying to apply ?
What Mac and what card are you trying to apply it to ?
What procedure are you following, and where do you get to when the error occurs ?

Error msg. states: the iPad "iPad" could not be updated. An unknow error occurrred (-1).

error msg. states: the iPad "iPad" could not be updated. An unknown error occurred (-1). My iPad is 16gb series 2 i believe wifi enabled

Hey there charlottefromwilliamsburg,
I see that you are experiencing and issue when attempting to update your iPad. Here is an article for you that may help you address this error:
Resolve iOS update and restore errors - Apple Support
http://support.apple.com/en-kw/TS3694
I would suggest that you particularly pay attention to the information in the following section, which addresses error codes such as the one you have been given:
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

TS3694 trying to update software on my iphone 4s- "could not be updated due to unknown error" (6). what does this mean. my phone appears to be in a near complete state of update...

Not sure what to do. finally decided to upgrate software on my phone. installed itunes on my new laptop. plugged by phone in and started process. nearing the end i received an error message stating that the phone "could not be updated due to unknown error" (6). HELP!
the phone itself appears to be in mid update....

This describes error 6:
Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, and 9006
Follow the steps to troubleshoot security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. An incorrectly set default packet size can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com isn't blocked by a firewall or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under "Advanced steps > Rename, move, or delete the iOS software file (.ipsw)" below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

The iphone could not be updated. An unknown error (occured 4005)

I have a problem with updating my iPhone 5 to IOS7. Everytime I go to update the iPhone to IOS7, I get this "The iphone could not be updated. An unknown error (occured 4005)" error. It stays stuck at "waiting for iphone" then the 4005 error pops up after like 10-15 minutes of "waiting for iphone".
Also it leaves my iPhone in the "connect to itunes" screen after the error pops up. And when I try turning the iphone on and off and restarting it, the iphone still stays stuck at the "connect to itunes" screen and I have to use software to unlock the phone so I can actually use my phone.
The screenshot of this problem is below. Someone help, my itunes is updated to the latest version as well.

I've got a similar problem only mine says unknown error (2001). During the initial installation of this months update a USB cord plugging in the iTunes icon showed up on the screen. It stayed there for about 2 minutes and then the iPhone rebooted. It repeated this cycle more times then I can count. I'm happy to say that it is now working. But non the less I've been pretty frustrated with the iPhone and Leopard sometimes.
In response to a comment that it seems that every iTunes related software update seems buggy I would have to say that I agree. I've been using Macs since 1987 and I have to say that in past 3-4 years Apple has changed a lot. It's more popular then ever before. It's products are even more stylish and innovative then ever before. But the rising demand for Macs has forced Apple to cut corners it seems. In some ways Apple products aren't what they used to be.

Iphone ios6 update could not be updated an unknown error has occured 1602

Hello,
So I have an iphone 4s, never had any issue until I tried updating to the new ios6 and shortly while it was applying the ios6 update, it stopped and gave me this error:
could not be updated an unknown error has occured 1602.
To which my Win 7 64 pc would not see it anymore, and itunes would not see it. Went through what apple suggested removed everything and reinstalled itunes, did not work. The only way I could get my iphone working was plugging into another pc running an older version of itunes and restore it. Once done I went back to the original PC worked fine to sync, but when I tried yet again to update to IOS6 it crashed again.
I have spent way too much time on this, spent way too much money on apple products (still need to update another iphone, and ipad, an itouch and an iphone 5), I need this fixed, who can help?
Image shows what happens:

"This error is caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple."
Taken directly from this article http://support.apple.com/kb/TS1275.
Plug your iPhone into iTunes and update it to the latest supported version, which is 4.2.1.
- Greg

Error : RGSUM could not be updated

Similar Messages

Maybe you are looking for