Error "roll area too small"! Can't find a way to resolve!Please hep.

Hello everyone:
       i am getting the error "roll area too small" when I am looping through an internal table and calling the code below on change of some value.
===
CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        authority              = space
        immediately            = space
        new_list_id            = c_x
        no_dialog              = c_x
       user                   = sy-uname
      IMPORTING
        out_parameters         = params
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc NE 0.
      CLEAR : params.
    ENDIF.
The printer destination has to be set up
    params-pdest = v_dest.
    params-prtxt = v_spool_text.
    params-paart = lc_paart.
    params-prtxt = v_spool_text.
    params-primm = 'X'.
    params-prrel = space.
    NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
    NEW-PAGE PRINT OFF.
======
I posted this before and got some feedback and tried everything but it is not fixing the problem! I rewarded points to all the answers. I had basis increase roll area size, optimized code and did everything I can but I am still getting the same error "roll area too small". Same program works in 4.6C but in ECC6.0 I get this error! I have other programs that generates more than 10,000 pages in the spool but the program I am working on creates only 7700 pages! I  am not sure what else is changed in ECC6.0! Could someone please give me any ideas? rewards assured.
thanks.
Mithun

Hello Mithun,
Even i think increasing the roll area should have helped
Are both the systems WIndows based  or is one unix based ?
see this
http://listserv.sap.com/pipermail/linux.general/2001-July/thread.html#670
and search for "roll area too small" in the list of links
it may help
Also,
in this solution, it says to use 'field groups'
http://www.sapfans.com/sapfans/forum/r2all/messages/42.html
Try these links as well - others with the same problem
http://marc.info/?l=mysap-linux-general&w=4&r=1&s=%22rollareatoo+small%22&q=b
Message was edited by:
        Kris Donald

Similar Messages

  • Roll area too small

    Hello All,
    We have a background job which is getting canceled saying Roll area too small
    can any 1 of you please explain what exciatly it means.
    Regards,
    Ravi

    Hi Ravi,
    This is related to Memory Allocation Sequence for all Work Process Types.
    Please check the roll area parameters in your system. If the size allocated to roll area is low then background jobs will not finish successflly.
    Please check the all other parameters also related to Memory Allocation.
    ztta/roll_first: Defines the first part of the roll area that is allocated to dialog process
    ztta/roll_area: Defines the total roll area per work process
    rdisp/roll_SHM: Defines the size of the roll buffer
    rdisp/roll_MAXFS: Defines the size of roll buffer and roll file
    em/initial_size_MB: Defines the fixed size of extended memory
    ztta/roll_extension: Defines the user quota for extended memory
    abap/heap_area_dia: Defines the limit for the amount of local memory allocated to dialog work processes
    abap/heap_area_nondia: Defines the limit for the amount of local memory allocated to non-dialog work processes
    abap/heap_area_total: Defines the limit for the total amount of heap memory allocated to all work processes
    Regards
    Krishna Vanga

  • Preview images are too small - can't be changed.

    When I open some jpegs, I only see very tiny versions of the images in Preview. It's really disconcerting. I know that they are larger - I've downloaded them from the web, saved them on the desktop or in a folder, and then when I double click and open them, they view at far, far smaller than the pixel width and height.
    Even when I select "Actual Size" in View, they remain just as small. And then when I click the + button to enlarge the image, it simply blows it up, pixellated.
    It seems really crazy and buggy to me. I've never had this problem before, and I've been using mac for years. Any clues / fixes?

    Look in you LabVIEW.ini for any font related lines.
    LabVIEW Champion . Do more with less code and in less time .

  • Redhat 6.3 on Hyper-V, "SRAT: Hotplug area too small" at boot

    Hello Guys,
    After installing Linux Redhat 6.3 on Hyper I receive this message at boot of the Linux virtual machine:
    SRAT: Hotplug area too small
    Can anyone help understand this message and how to resolve.
    Thank you in advance.
    Regards
    Raymond TODO

    Hi Michael,
    Thank you for your answer. Just in case you need them, please find below the information you requested in your previous post.
    What version of Hyper-V are you running? (2008, 2008 R2, 2012, 2012 R2):
    Answer: Core Windows 2008 R2 Hyper V
    How much memory is configured in the VM?:
    Answer: 16Gb
    And how many vCPUs?
    Answer: 4
    How did you install RHEL 6.3? From the installation ISO? Or by copying a VHD that already had RHEL 6.3 in it?:
    Answer:  From ISO
    If from the RHEL 6.3 ISO, then the Linux Integration Services (LIS) are not already installed. If from a cloned VHD, then the LIS might already be installed. So what I'm really wanting to know is if the LIS is installed.
    Answer: Yes, I installed the LIS v3.4 after the RHEL 6.3 installation
    Thank you again for your assistance.
    Regards
    Raymond TODO

  • Screen Output area too small

    Hi All,
    When I am going to MIRO system is showing the Message (#00118) Screen output area too small.
    and the screen will become blank.
    Please guide me.
    Thanks in advance.
    Pavan H S

    hi
    take help of abaper and try activating the screen program for MIRO in se51
    regards
    kunal

  • How can I sort my photos by size?  I need to get rid of those which are too small to print.

    Is there a way to sort individual photos in iphoto by size.  (I know you can sort photos in finder- picture by size, but mine are in iphoto). I am organizing my thousands of photos into files within iphoto in order to print hundreds.  I am finding that many are too small to ever print (20-30kb) , and would like to delete those en masse rather than waste time sorting them, but cannot find a way to do that.  Does anyone know if there is a way?  It would be a terribly useful function.  Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.  Thanks for any info.

    No there is no way to do this.
    Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.
    No it wouldn't. There's no way to change the filesize in iPhoto, it always preserves the original file.

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • Error "Screen output are too small" when looping through internal table!

    Hello All:
         I have a huge internal table with some 79000 records and while looping through them and doing some other processing inside the loop, I am getting an error "Screen output are too small"! Could someone please help mw how to fix this issue? I can send the all the code if anyone wants to look at the code. Thanks in advance and rewards are assured.
    Mithun

    Hi,
    Check this
    new-page print off.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    destination = v_dest
    IMPORTING
    out_parameters = params
    valid = valid.
    * params-linct = '58'.
    * params-linsz = '170'.
    * params-paart = 'X_58_170'.
    * params-prtxt = v_spool_text.
    * params-primm = 'X'.
    * params-prrel = 'X'.
    NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
    After the call fm GET_PRINT_PARAMETERS params internal table contains all the values for generating spool.
    aRs

  • I can't delete partition in disk utility, it keeps telling me that "the changes are too small"

    I previously split my disk into two different disks, however I want to combine them together again, yet i was unable to delete the second partition. I can't delete partition in disk utility, it keeps telling me that "the changes are too small"
    Plz help!!!!!!

    Make at least two complete backups of all your data. Boot from another drive and partition this one as desired. Restore the data.

  • No cursor on any website, and boxes are too small to type username and password. Example I can't type username and password for yahoo e-mail

    Example of no cursor. Any website, such as youtube, there is no cursor in the box, and there are no letters when I type, but the system recognizes what I type. As for e-mail, hotmail works o.k., but with yahoo the boxes for username and password are too small, there is no cursor and I can't type anything. With gmail, there is no cursor, but I can type my username and password.

    Try:
    iOS: Troubleshooting FaceTime and iMessage activation

  • The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    babowa wrote:
    The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
    It's a b*&^ch getting old .  I still use the screen zoom instead of decreasing resolution, but maybe soon ...

  • The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it lo

    The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it looks like this problem comes and goes as Photoshop is updated.  It should be an easy fix.

    Try the Photoshop CC 2014 Preference experimental section 2X UI option

  • Getting error "Screen output area too small"! Please help!

    I am getting an error "Screen output area too small" when looping through some huge internal table and sending to spool "on change of some value" in my internal table. Could someone please help me in correcting this? Rewards assured.
    Thanks.
    Mithun

    Check the simple program and have tested ,it works great( IN ECC 6 Version)
    REPORT  ztestspool.
    DATA : arc_params TYPE arc_params,
    v_print_parms TYPE pri_params,
    w_valid TYPE char1,
    w_valid_spool TYPE char1.
    CONSTANTS : lc_paart LIKE sy-paart VALUE 'X_65_132', " Paper Format
    lc_locl TYPE sypdest VALUE 'LOCL', " Destination
    c_x TYPE char1 VALUE 'X'.
    Setup the Print Parmaters
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        authority              = space
        immediately            = space
        new_list_id            = c_x
        no_dialog              = c_x
        user                   = sy-uname
      IMPORTING
        out_parameters         = v_print_parms
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc NE 0.
      CLEAR : v_print_parms.
    ENDIF.
    The printer destination has to be set up
    IF v_print_parms-pdest = space.
      v_print_parms-pdest = lc_locl.
    ENDIF.
    Explicitly set line width, and output format so that
    the PDF conversion comes out OK
    *v_print_parms-linsz = c_linsz.
    v_print_parms-paart = lc_paart.
    NEW-PAGE PRINT ON PARAMETERS v_print_parms NO DIALOG.
    *PERFORM display_output.
    write :/ 'This is test for spool generation'.
    NEW-PAGE PRINT OFF.
    Thanks
    Seshu

  • How do I make icons bigger? All icons are way too small for speedy use. no matter what I do they remain too small. Is there a way of getting them the same size as previous versions?

    All icons, such as refresh page, back, forward, stop and home etc; are just too small for comfortable use. For now I am uninstalling Firefox 4 and going back to 3.x. even the zoom page icons are too small.

    "I had read that GarageBand or the Musical Typing there can sometimes not display properly when the resolution is changed."
    Well, did you checked GB after you changed your resolution?
    Which setting did you change to?
    You & I have the same size iMac screen. My resolution setting is 1280x800. Everything fits perfectly in the windows & on desktop including the menu bar.
    All info in my windows are showing. I did not need to adjust my browser font size settings. I am sure you are aware of the browser font size settings. I use FF & the settings are in Preferences>Content.
    In the Finder window you can enlarge the icons & fonts also.
    Finder>View>Show View Options.

  • Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0

    Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0........please help......
    Thanks

    Personally, I would not recommend deleting/removing the iWorks 09 folder for several reasons: one is that the new versions have had several functionalities removed and until you decide that you can work with the new one and do not miss any features the older version had, I would leave the old one in place. Personally, I will not be using the new versions.
    The second reason is that you can accomplish what you want using a different approach: simply open a Get Info window of your document and choose which version of Pages you want this to open in - you can also stipulate that all docs like this are opened with whichever particular version.
    FWIW: Once you have edited an old document in the new Pages version, you can no longer open it in the older version. However, you can still export it to the old version.

Maybe you are looking for