Error RSAR 371 when checking source system in BI

This was mentioned in 1 forum but not really answered to my understanding.
Message - BI IDOC type ZSBB003 not the same as source system IDOC type ZSBC005
RSAR 371
This is when checking a source system from BI 7.0 to ECC 6.0 after a refresh and running BDLS with many patches.
thanks

Hi Bradley,
I believe you have to run BDLS using option 1 - Conversion of Client Dependent and Client-Independent Tables. This is to ensure that you have a correct conversion to a new logical system.
You can refer to these notes too:
886102, 184754, 325470
These notes help but rather confusing to read it at first. Hope this helps.
Regards,
Andrew

Similar Messages

Error in codepage mapping for source system

Hi Experts,
I am getting the following error while loading data from ECC only for Account COPA datasource.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Regards,
Sandeep Sharma

Hi Sandeep,
This is a issue related to idocsRFC connections from teh sourcesystem....
U can contact ur BASIS team to solve this...
From their end they have to chk the unprocessed/errored idocs in BD87...
They have to run a report:RBDAGAIN to process the errored idoc's in the source which are in STATUS:'02'.
This is a solution for temporarilrly basis...
If this occurs regularly they have to change the settings in SM59 which is so important...
Refer exact note for this: 784381
The SAP note 613389 may also be relevant for the error message "Could not find code page for receiving system", please check the information given in the note and see if you can use it to resolve the problem.
Regards,
Marasa.

Error in codepage mapping for source system. Error text:

guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AM

Hi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit

Error : Unicode setting doesnot match source system in BW

Hi All,
While replication data in BW im facing the following error :
unicode setting doesnot match source system.
Kindly suggest.
Regards,
Amit Miglani.

Hi,
We have installed a fresh BIW server on MSSQL database 2005. We have selected components like as ABAP.JAVA,EP,EP Core ,BI Java. While replicating the datasource using tcode RSA1 from R/3 Retail Server we are getting an error Error in module RSQL of the datasource inter face .
Details of Support package level-:
SAP_ABA 700 0016 SAPKA70016 Cross-Application Component
SAP_BASIS 700 0016 SAPKB70016 SAP Basis Component
PI_BASIS 2006_1_700 0007 SAPKIPYM07 Basis Plug-In (PI_BASIS) 2006_1_700
SAP_BW 700 0018 SAPKW70018 SAP NetWeaver BI 7.0
BI_CONT 703 0008 SAPKIBIIP8 Business Intelligence Content
Please suggest us the solution.
Note: we are not getting any dump in st22. we have already checked the note 1162821
Regards,
Amit Miglani.

Error in codepage mapping for source system. Error

Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?

Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards.

How to Check source systems in RSA1 and verify that connections are working

How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod

Error when creating source system

Hi,
Could someone help me to solve this issue :When I want to create a source system D99100 in BI , I get the following message:
the test and remore connection via sm59 in BI are OK.
Source system cannot use any of the proposed connection names
Message no. RSAR362
Diagnosis
Every connection to a source system is named using a unique two-digit identifier. Source system D99100 does not accept any of the proposed values.
The last proposed value was B9.
System Response
Source system has not been connected.
Procedure
If you want to recreate the source system from BI information, then you can only use a single value, namely B9, because the connection already has this name in BI.
Delete the existing connections in the source system or contact a BI consultant.

Hello,
By this time your issue might be resolved.
When you are trying to Connect or Reactivate source systems you might get this error. In the source system (R/3) check the table entries RSBASIDOC. Some reason after system copy, these entries should correct if you run BDLS and some time it mess up.
Go the table and go to the edit mode and change the entrie for that RFC destination. Change the filed TSPREFIX to some thing else and save it. Go back to BW and try to reconnect and you will be able to connect it.
Hope this helps in the future for this thread.
PREDDY.

Permission problem when create source system between BI and R/3

Hi All,
I want to create a source system between BI7 and R/3 system
Both RFC connections have been created and tested succefully on the 2 systems
But when i create the source system on BI I have the message :
"Changes to Repository or cross-client customizing are not permitted"
Any idea ?
Thanks in advance for answers
Sebastien

Hi All,
Thanks for your answer
The issue was solved when system is opened
Now my source system is created but I can't activate it !
When I try to activate I have 2 error messages in result :
RSAR 374 : The folowing errors occured in the source system
RSAR 375 : Result of the destination check: Timeout
There is no SAP help on these messages and for the moment I don't find thread about this on forum
Any idea ?

Error while Creating Flat file Source System

Hi Friends,
The message "No entry for BW_USER in table RSADMIN available" is shown when I try to create a Source System for File System(Manual Metadata, Data using File Interface). Could somebody help me please.
Thanks in advance.
Hanuma Reddy

Hi,
I have solved this problem from SDN by seeing below reply to some others question. Thanks Ajay.
I think this problem comes if you have used more than one client in BW (for example if you logged on to 000 and ran admin workbench initially after installation, and then if you prepared another client for use as BW client).
Look at OSS note 410952, it mentions of the same error. The fix as mentioned in the note is as follows
Symptom
You receive the error message when trying to connect a source system to the Admininistrator Workbench:
"No entry for BW_USER in table RSADMIN exists" (message number RSAR 059).
Additional key words
RSAR059, APO, RSADMINA
Cause and prerequisites
In table RSADMINA, the BW user is not maintained for ALE.
Solution
Maintain the entry using the following path:
Call Administrator workbench (transaction RSA1).
From the 'Settings' menu, select Global Settings'.
If an entry already exists in the field "BW user for ALE", delete this.
Enter the correct names for the BW users in this field.
Save the entry.
You must restart the Administrator Workbench (RSA1) now.
The source system can now be linked without errors.

Error msg RSAR502,while creating source system?

Hello Gurus,
when i am creating source system i got error msg called RSAR502,can any one solve this issue..
Thanks in Advance

Hi,
Check the OSS note : 184586,493422.
Take the help of ur Basis support.
Hope it helps-
MM

DBIF_REPO_SQL_ERROR when activating Source System in BI

Hi,
Whenever I try to activate a new source system or any other objects it gets terminated.
It generates a dump DBIF_REPO_SQL_ERROR
I am on MaxDB and I checked for the free space it is about 45%.
Following is displayed in SM21 System Log in red:
Database error -1000 at INS access to table RSOLTPSOUR
> POS(1) Too many lock requests
Database error -1000 at OPC access to table REPOLOAD
> POS(1) Too many lock requests
Run-time error "DBIF_REPO_SQL_ERROR" occurred
> Short dump "070601 212500 firefox_ NSP_00 " generated
But when I check SM12 then there are no locks displayed. Even i try search with above tables.
Details of the dump:
Runtime Errors         DBIF_REPO_SQL_ERROR
Short text                 SQL error "-1000" occurred when accessing program
Trigger Location of Runtime Error
                              Program                       SAPLRSAOSINT
                              Include                         LRSAOSINTU08
                              Row                             308
Module type                 (FUNCTION)
                              Module Name               RSAOSINT_PSEUDO_DVERSION_WRITE
Please advice on how to get rid of this error.
Thank you,
sam

Anil,
thnx for the note, but i have already followed the steps in it.
any other workarounds you can suggest, are highly appreciated.
thank you,
sam

ERROR - no available datasource for source system exist

I tried to load the master for 0Bill_Type
1) Install infoobject business content and Create infoobject
2) Activate datasource in R/3
3) Replicate datasource
4) Assign infosource ---> the error said no available datasource for source system exist
When I go to source system--> Object overview --> I don't see anything at all?
Please advise what went wrong ?

Hi Pandadda,
I think you have not transferred the APPLICATION COMPONENT HIERARCHY yet. If not, then do the following:
1. In your R/3 system execute TCODE = SBIW.
2. Go to BUSINESS CONTENT DATASOURCES
3. Execute TRANSFER APPLICATION COMPONENT HIERARCHY by clicking the CLOCK.
Replicate you datasource then check it on your BW system
R,
Adwin

Data Load Error after Client copy on Source System

We did a client copy to our QAS source system. After that was complete, I tried to do a couple of full data loads. But they fail. The only errors I see are on the source system when I try to manual update the Idocs. They are:
EDI: Partner Profile not available
Entry in inbound table not found
Is there a step I need to take after the client copy and before the loads? I have a feeling that I'm forgeting something.
Thanks,
Chris

Hi Chris,
Check the following.
1> Go to WE20 check whether you are able to see two logical system in "Partner Type LS" one for Source and one for Myself.
2> If you say Yes for <1> then check in both the logical system, in the classification tab, partner status should be 'active'.
3> Check you have used REMOTE USER in main and in Outbound and inbound Parameters "Post Processing Permitted tab " for each Message type.
4> go to out bound message type and check the "Receiver port" pointing to correct RFC destination for both ( Source and Myself logical system).
If your answer is no for <1> then perform all the steps.
Hope this will help you.
Suneel

Error in pricing when doing sourcing in EBP 4.0

Hello,
We're experiencing random errors when doing sourcing in EBP 4.0. The shopping carts don't seem to have any similarities that could launch the error. There has been few cases when the same error has occured when user is creating a shopping cart.
The problem occures when doing sourcing and the shopping cart is either being held or a PO is created. The error creates dump in ST22, "UNCAUGHT_EXCEPTION". This is somehow related to pricing and we have checked note 673372 and ran report BBP_CND_CUSTOMIZING_CHECK, all OK. IPC is running the same SP level as SRM, SP level 10.
We have already created an OSS about this, but as this is completely random we haven't been able to reproduce the error and no solution has been found.
Here's some data from ST22:
Transaction......... "BBPSOCO01 "
Program............. "SAPLBBP_PDH"
Screen.............. "SAPLBBP_SOCO_UI_ITS 2000"
The termination occurred in the ABAP program "SAPLBBP_PDH" in "BBP_PD_ABORT"
The main program was "SAPLBBP_SOCO_UI_ITS ".
The termination occurred in line 69 of the source code of the (Include)
program "LBBP_PDHU08"
of the source code of program "LBBP_PDHU08" (when calling the editor 690).
000600   * get the messages from the application log
000610     TRY.
000620         CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'
000630           TABLES
000640             E_MESSAGES = LT_MESSAGES.
000650       CATCH CX_BBP_PD_ABORT.
000660         REFRESH LT_MESSAGES.
000670     ENDTRY.
000680
>     RAISE EXCEPTION TYPE CX_BBP_PD_ABORT EXPORTING
Thanks already in advance!
-Jussi

Hi
Please refer to following SAP Notes:
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Also try to implement the latest IPC patches following the instructions from note 880749, then restart the VMC. It worked for us, after trying many things with no luck.
Alternatively, try this as well. There must be some problem with VMC. Most probably java connection problem. Please execute program RSVMCRT_HEALTH_CHECK in SE38 transaction. You should see green for all 4 messages in the result. Please contact your basis consultant and refer notes 854170 (and 844817)
<u>Other related OSS notes.</u>
Note 1024374 - Unexpected pricing error for pricing irrelevant item
Note 992259 - NullPointerException in Command GetFilteredCsticsAndValues
Note 860935 - pricing customizing exits are missing
Note 673372 - Short dumps UNCAUGHT_EXCEPTION in SRM 3.0, 4.0, and 5.0
Note 854170 - Activating the component "VM Container"
Note 593109 - Short dumps UNCAUGHT_EXCEPTION in SRM 2.0 (EBP 3.5)
Note 880749 - Patching of VMC based AP 7.00 engines
Note 854170 - Activating the component "VM Container"
Note 844816 - Information for Upgrade from IPC 4.0 to SAP AP 7.00
Hope this will help.
Please award points if helpful.
Regards,
-Atul

0HR_PA_EC_01 Extractor error converting from currency in source system

Hi all,
when I run the standard extractor 0HR_PA_EC_01 , I get the following error message in the source system (application log):
Error converting currency from USD to on 09/03/2008
Message no. HRECM00SERVICE006
Thus, the requst in the PSA in BI / BW is Red.
Any recommendations?
Points will be assigned.
Thanks

Rajan,
You can try this function module for converting currency from one format to another format...
CONVERT_TO_FOREIGN_CURRENCY...
other wise... you can try with this function module..
RSW_CURRENCY_TRANSLATION............ this one i'm not sure abt that will convert ur data into required format..

Error RSAR 371 when checking source system in BI

Similar Messages

Maybe you are looking for