Error RSAR 485 - Repeated import-subsequent processing for object

We have received the following transport log message and the object has not been activated. Has anyone else seen this? It did not happen when importing into our QA system, only when importing into our production system! Suggestions on how to correct??
RSAR 485
Repeated import-subsequent processing for object ZSPI_MANU_MAT2 LOCAL - object skipped

Hi,
To know the causes and solve this kind of error, please read and implement these notes:
1414229 Transfor.accidentially deleted dur.transport w/out reimport
1284416 BI7.0(SP21) Transformations deleted following after import
I hope it helps to solve it.
Regards,
Fran.

Similar Messages

Nternal ERROR: Can not find the ACL containter for object ...

We are using OWB 10.2.0.3. We tried to introduce two basic roles to prevent user A from accessing certain parts of our project. Somehow (I cannot really say how) we ended up in the error message below whenever we want to modify the security properties of an object.
Neither in metalink nor in the oracle forums I could find any hint about that error.
Can anyone help??
Thanks in advance, Maren
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
Internal ERROR: Can not find the ACL containter for object:CMPMap@1ba11bc/id=2023180/owningFCO=2023180/proxyFor=(CMPMapGen@1a4d5c6/id=2023180/stname=CMPBatchMap/pname=LOAD_XML/lname=LOAD_XML/status=CLEAN/committed=true/persistent=true/propsLoaded=false)
     at oracle.wh.repos.pdl.security.SecurityPolicyManager.getAccessCharMapOfPrivilegeOwner(SecurityPolicyManager.java:166)
     at oracle.wh.repos.impl.foundation.CMPElement.getAccessCharMapOfPrivilegeOwner(CMPElement.java:2743)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.hasPrivilege(OWBSecurityImpl.java:820)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.internalSecurityCheck(OWBSecurityImpl.java:1449)
     at oracle.wh.repos.pdl.security.OWBSecurityImpl.securityCheck(OWBSecurityImpl.java:649)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:660)
     at oracle.wh.repos.pdl.security.SecurityModuleImpl.securityCheck(SecurityModuleImpl.java:623)
     at oracle.wh.ui.common.WhSecurityHelper.securityCheck(WhSecurityHelper.java:112)
     at oracle.wh.ui.console.commands.EditObjectCmd.performAction(EditObjectCmd.java:107)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)

Hi Maren
Like you I get this error and do not know what steps caused it.In my scenario I have some mappings that give the error and some that do not - the repository user gets the error but the repository owner does not.
Thinking back over the last number of months (as this project contains 7-8 months od work - we do have exports of the project) I think the ones giving the error are those that perhaps were copied from another to start the coding but I cannot be sure.
I have read the metalink note mentioned above as well as the the queries posted by Oleg and yourself. The queries posted are slightly different, one has a where clause
fco.classname = 'CMPACLContainer' (Maren's)
and the other
fco.classname='CMPMap' (Oleg's).
Was this intentional Maren on your behalf for your problem to be fixed?
We are using 10.2.0.3.33 OWB client and 10.2.0.3.0 OWB repository.
Thanks
Edwin

Getting Error: The number range is not maintained for Object/Year: J_1ILIC/

Hi Gurus,
When I try to capture deemed export license from J1ILIC01 I get this error
The number range is not maintained for Object/Year: J_1ILIC/
I tried to maintain number ranges in SNRO & SNUM there the changes are saved but I am not able to capture the license and receive the same error again. Please help.

Hi
Just check if you have maintained number range for the correct year as shown in error.
Goto SNRO/SNUM enter the object ID and click on number range .Maintain there for that particular year.

I need some Important Trigger Programs for Objects

I need some Important Trigger Programs for Objects.
If the program includes the V-array appln, that would be better to.

There are some drawbacks, running Windows 7 (only) on a Mac via Bootcamp yields less than stellar results, especially with the Retina display.
And of your traveling, the Mac's high power needs (especially the Retina display) and lack of removable battery are going to be a serious issue. The Retina display is glossy, not ideal for viewing on the road and in varied environments.
CS4 won't run on the OS X version that comes with a Mac, so your looking at purchasing CS6.
Support for Windows is more widespread than for Mac's, also if you ever need to redownload OS X to fix a issue, requires a fast reliable Internet connection of the broadband kind.
If your running Windows on your Mac, you can expect to be on your own and not get support as easily as if you were running it on a regular PC.
If you can't afford to keep up with CS upgrades, then you shouldn't be considering a Mac because there are more paid upgrades on that than on Windows 7, it's like a annual nightmare.
IMMO your still better off on a decent, 1920 x 1080 res, matte screen, removable battery (with extras), Win 7 Pro i7 machine (Pro+ runs XP programs) which will stay like it is and get security updates until 2020.
OS X changes every year and if you don't upgrade, + all your third party software, then about 3 years later your left behind for updates.
Also you will have to buy Win 7 to run on your Mac, the OEM disks won't work.
If your trying to budget, then a Mac is certainly not for you.

Import material Process For DEPOT Plant

Hi,
I know the process of import procurement in for manufacturing plant, like first we are doing PO then MIRO for delivery cost conditions i.e for custom conditions then J1IEX PART 1, GR , J1IEX PART 2 then MIRO for vendor, i want to kow the process of import material for depot plant, can u give some links or some tips for this and how the duty pass on concept work.
regards,
zafar

HI
Check Below link
[Re: How to Upload initial Excise Invoices at Depot]
[Excise Procedure for Depot Sales and Depot Stock Transfer ?]
Report for Depot Excise Invoice
Additional Excise Duty for Depot
SAM

How to find out import & export path for object migration between D Q & P?

Hi guys!
Is there a way, how to find out export and import path for object transport on XI?
Thanx!
Olian

Hi,
Have a look at these links.
When we do an export of the IR or the ID Oblects, a typical path at which it gets exported in the XI Server is as follow:
For IR Objects:
C:\usr\sap\PI1\SYS\global\xi\repository_server\export
For ID Objects:
"C:\usr\sap\PI1\SYS\global\xi\directory_server\export"
Now in case you need to import the ".tpz" that you have.... You need to place it in the path mentioned below and u will be able to do import it from IR or ID...
For IR Objects:
C:\usr\sap\PI1\SYS\global\xi\repository_server\import
For ID Objects:
"C:\usr\sap\PI1\SYS\global\xi\directory_server\import"
File Level transport in sap xi
Every SLD related transport details are explained here
Regarding transport of SLD objects
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
Regarding transport of XI objects
http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
Regards,
Akshay Jamgaonkar.
Reward points if find useful.
Message was edited by:
Akshay Jamgaonkar
Message was edited by:
Akshay Jamgaonkar

I receive the following error when attempting to import to Lightroom for the first time ?:0: attempt

Can anyone help? This has been a very painful process!
error message is as follows: c?:0: attempt to call field 'isNSImage' (a nil value)
forums have been no help. I am starting to regret even buying this software

I do not recall that error message being discussed before. Is it possible for you to post a screen capture of the error message?
Also provide some detail of your OS, Mac or PC your Camera, are you importing from HDD on the computer, direct from camera, from a card reader? Any other info that could give some clue to what is happening.

Import Procurement Process for India

Hello Gurus
What are the steps involved in Import of Raw Materials specifically for India
Satish

Dear Satish
You need to follow the process as listed:
1. Capture the customs Invoice for paying the Customs Duty. This would contain both the cenvatable and non cenvatable part. This is done through MIRO.
2. Make the payment of Customs Invoice through F-53/F110/F-58
3. The customs will give you a bill of entry. Do a Goods Reciept against the same for your purchase order. In this case your Stock Account would be updated with the value of Raw Material Plus the non Cenvatable part of Customs Duty.
4. Capture the Excise Invoice. Here the Excise Account would be debited for the Cenvatable part of Customs Duty
5. Capturte the invoice for Raw Maetrial Vendor through MIRO
6. Capture the Charge for freight for a freight vendor through MIRO
7. Capture the Charges for Clearing & Forwarding Agent through MIRO
8. Make the payment for RM,CHA & Freight through F-53, F110 or F-58
Thanks & Best Regards
Sanil K Bhandari

Error while activating the Master Data InfoSource for attributes

Hai
Im trying to load the attributes for master data characteristics .
I created the InfoSource and when im trying to activate it .
Then it gives the following error like below
Diagnosis
An error occurred in the program generation:
Program / Template:   RSTMPL80
Error code / Action: 6
Row:        505
Message:    The data object "P_S_COMM" has no component called
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'
So please tell the what is the error and how to resolve this issue.
And pls give the error 'RSAR 245' message from SAP note system.
I will assign the points
bye
rizwan

hi Rizwan,
check if helps Note 602318 - RSAR 245 error analysis with RSTMPL80
Summary
Symptom
The process of generating transfer rules or loading data terminates with error RSAR 245.
The long text for error message RSAR 245 indicates the cause of the generation error.
1. Error code: 6
a) Message: The P_S_COMM data object has no component
This is very likely to be due to an 'obsolete' communication structure.
b) Message: <table name> is already declared.
c) Other messages
2. Error code: 7
Other terms
RSAR245, RSAR 245, activate transfer structure, monitor, request
Solution
1. Error code: 6
a) 'Obsolete' communication structure:
            Due to an optimization algorithm, pressing the 'Generating button' does not have any affect on the communication structure. Therefore, use the following workaround:
Select 'Communication structure' -> 'Change'.
Add any InfoObject (for example, '0MATERIAL') to the communication structure -> 'ENTER'.
Communication structure ---> 'Save'
Selet the InfoObject you inserted and delete it.
Communication structure ---> 'Save'
Communication structure -> 'Generate'.
a) Message: <table name> is already declared. Check whether the local part of your routines contains TABLE statements. TABLE statements always have global validity and should therefore be in the global part of the routine.
b) If the error occurs when data is being loaded, the transfer rule should be generated using RSA1.
In many cases, generating transfer rules using RSA1 results in a detailed error message.
2. Error code:
           Program to be generated is locked by parallel process.
This error can sporadically occur if parallel processes simultaneously try to generate the same program.
Unfortunately, you cannot completely prevent the error from occurring since these types of lock situations can still crop up during data loading in parallel processes. We are currently working on improving system stability relating to lock situations during the load task.
Reloading usually works without any problems.

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Nested Tables - Unable to make Table Header row to repeat in subsequent pages

Hi,
I am unable to make the header row to repeat in subsequent pages for nested tables.
Can anyone reply with a sample form to illustrate a similar scenario?
Thanks,
Rohit

Hi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S

Solution manager4.0 error at point of import java dump.

hi gurus,
While installing solution manager 4.0, I am getting error at point of import java dump.
for any suggestions appreciated.
OS : windows 2003 server
Sql : SQL 2005 server
log file:
java version "1.4.2_13"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_13-b06)
Java HotSpot(TM) Client VM (build 1.4.2_13-b06, mixed mode)
Nov 7, 2007 2:49:22 PM com.sap.inst.jload.Jload main
INFO: Jload -sec DSM,jdbc/pool/DSM,
MEMSRV407/sapmnt/DSM/SYS/global/security/data/SecStore.properties,
MEMSRV407/sapmnt/DSM/SYS/global/security/data/SecStore.key -dataDir D:/SAP_Solution_Manager4.0_SP2/Javacomponents\JAVA_EXPORT\JDMP -job C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\IMPORT.XML -log jload.log
Nov 7, 2007 2:49:35 PM com.sap.inst.jload.Jload main
SEVERE: couldn't connect to DB
Nov 7, 2007 2:49:35 PM com.sap.inst.jload.Jload logStackTrace
SEVERE: java.sql.SQLException: [NWMss][SQLServer JDBC Driver][NWMss][SQLServer JDBC Driver]The requested instance is either invalid or not running.
     at com.sap.nwmss.jdbc.base.BaseExceptions.createException(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseExceptions.getException(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
     at com.sap.nwmss.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.connect(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseConnection.open(Unknown Source)
     at com.sap.nwmss.jdbc.base.BaseDriver.connect(Unknown Source)
     at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:215)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.createConnection(OpenSQLDataSourceImpl.java:522)
     at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:276)
     at com.sap.inst.jload.db.DBConnection.connectViaSecureStore(DBConnection.java:105)
     at com.sap.inst.jload.db.DBConnection.connect(DBConnection.java:149)
     at com.sap.inst.jload.Jload.main(Jload.java:580)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Thanks
Ramana

HI,
You are using java 1.4.2_13... which is ok but i would recomend to use 1.4.2_09.. and download your export cd's again.
Thanks,
will fix it.

CO_ITEM: write archive for object PSG is cancelled by system

Dear Experts;
I have one more problem in archiving project at my client using R/3 4.7.
On preparation for this archiving project, we have simulated all objects on "development server" and they went OK and we also have executed what was recommended by sap note nr 613707.
Now, we move to the next step to QA server where the data is mirroring to Production server. Here the comes the problem on "CO_ITEM". The problem is, the system cancel the write process for object "PSG". For your information, we have checked all the parameter such as;
- Technical setting
- Residence time for CO line items
When we check the log it says: "ABAP/4 processor: TSV_TNEW_OCCURS_NO_ROLL_MEMORY"
What does it mean and are we suppose to do?
Your advise and support is highly appreciated.
Thank you,
AZNI

Since you QA system is a mirror of Prod it contains large number of CO line items as compared to Dev environment. Due to the large number of CO line items the buffer size is getting exceed resulting in the dump.
Check the OSS Note 888292 - Archiving CO_ITEM for orders terminates
Hope this helps
-Samanjay

General exception in deploy transformation for object "ZWAD_PPQM_Q009.

hi experts
I am getting this error when i am tring to access report
General exception in deploy transformation for object "ZWAD_PPQM_Q009.
thanks

Hi,
Please help.
How did you manage to resolve this. I have similar issues.
I have SAP_ALL and can run the reports without problems but users have error message
general exception in deploy transformation for object "WEB_TEMPLATE"
thanks

Number range R4 for object BANF nearly exhausted

Dear,
when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
Best regards
Meng HM

>
Meng HM wrote:
> Dear,
>
> when I use MD15 to convert Planned order to PR, this error message shows up "number range R4 for object BANF nearly exhausted"
> I know the range of PR number is nearly exhausted. but could someone teach me how to check it. I mean use which transaction to check what BANF stands for...
>
> Best regards
>
> Meng HM
Check this path: spro>MM>Consumption based planning>number ranges>define NR for planning run, execute and maintain the interval of planned orders.
Then apply this internval in OPPQ, under number range button.
Edited by: Afshad Irani on Aug 30, 2010 10:34 AM

Error RSAR 485 - Repeated import-subsequent processing for object

Similar Messages

Maybe you are looking for