Error RSBOLAP 018 WAD 7.0

Hi,
I tried to execute my Web-Template and I always get this error:
RSBOLAP 018 : call FM RSWR_TEMPLATE_PROCESS_PROXY to Progld CHSFSR00070_PORTAL_BW on Host CHSFSR00070 with SSO not authorized: Authentication
What is missing in the Portal configuration? Please Help.
Pascal

HI Pascal,
Read SAP Note 916090 to overcome the error of RSBOLAP 18
Cheers:-)
Vivek

Similar Messages

RSBOLAP 018 Error In WAD

Hi Experts, i am using BI 7.0. And am trying to execute reports from WAD. However it always gives an error saying
"RSBOLAP 018 Java System Error: An unknown error has occoured during portal communication" while opening the report and
"RSBOLAP 018 Java System Error: Incoming call not authorised" while executing the report.
I read SAP Note 937697 and executed the support tool to receive the following error.
RED: BI Mastersystem
Error: Error while connecting to BI mastersystems via RFC. java.lang.RuntimeException: Native connection to banckend system is broken
Solution: Check connection properties in Portal Systemlandscape category 'Connector' (Systemlandscape / SAP_BW)
I checked on the same...and all seems correct...also the connectivity tests in the BI Portal pass
Please help

Sorry, I forgot to mention that I also solved the problem.
In the case someone else is going to have this issue here some quick hints:
1) If you have an add-in installation AS ABAP+Java with both using the same <SID> you need to recreate the SSO keys with an alternative <SID>. Note that you need to restart the system afterwards.
2) I also needed to manually change the ACL certificate in STRUSTSSO2 to the right client.
3) Finally I had to install a correction mentioned in a note (937697)
I hope this will save some time for the next person with these problems.
In case all my remarks didn't help note 917950 is a good starting point.
Especially have a look at the attached pdf, it is a nice illustration of the required settings.
Regards,
Minima

RSBOLAP 018 Java system error in BEx Web Application Designer

Hello,
while doing inside BEX Web Application Designer "validation of webtemplate" with
command "validate on server" I get following error message of WAD :
" Message RSBOLAP 018 description : Java system error : an Unknow Error occured during portal communication"
My procedure till now was ( please see results as screenshots in attachment) :
a) ckecking prerequisites for "Java template installer'" --> result "prerequisites.jng"
b) running "Java template installer" -> " result templateInstaller.jpg"
c) running Bex Web Application Designer as mentioned above results in error
message as mentioned above
d) running Diagnostic & Support Desktop Tool --> "result Diagnostic support desktop tool.jpg"
It says that something is wrong with "BI Mastersystem" because of failed connect to
message server.
Please advice me what I should do.
Thanks in advance
Regards,
Oscar

Hello
It is obvious that the connection between the ABAP and the Java is not working.
There should be a JCo RFC from the portal side to the ABAP stack set up and an RFC from the ABAP stack to the portal.
Check the entries of the table RSPOR_T_PORTAL
The RFC specified here should be the one mentioned above (ABAP - Java)
Check the name of the system should be SAP_BW
Is the parameter icm/host_name_full set on the ABAP stack with the domain name ?
Connect to the BI portal:
http://FQDN:5NN00/irj/portal
Navigate to system administration -> system configuration -> system landscape -> expand "portal content" -> systemlandscape -> SAP_BW
Right click on SAP_BW - Open - Object
Here you need to maintain these:
ITS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
ITS Host Name - FQDN_OF_BW_ABAP:port - You can use the value of icm/host_name_full parameter and retrieve port number from Tx SMICM - Services
ITS Path - /sap/bc/gui/sap/its/webgui
ITS Protocol - Select http
Logical System Name - BW ABAP Logical System Name - Tx SCC4 or BD54
Logon Method -SAPLOGONTICKET
Message server - BW ABAP FQDN
SAP Client - BW ABAP Client Number
SAP System ID (SID) - BW ABAP SID
Server Port - 39NN
Web AS Description - BW ABAP Logical System Name - Tx SCC4 or BD54
Web AS Host Name - FQDN_OF_BW_ABAP:port - icm/host_name_full and retrieve port number from Tx SMICM - Services
Web AS Path - /sap/bw/BEx
If everything is set properly then do a test connection.
Good Luck
RB

WAD ERROR RSBOLAP

Hi All,
When I am trying to filter on a characteristic in a web template
I am getting the following error
Message Class: RSBOLAP
Message No. 014
" Transformer exception while transforming BEx Web templates".
regards,
Animesh

Hi Animesh,
Please refer to the below thread which is very similar to yours.
Technical name of a condition
Hope this helps u...
Regards,
KK.

Error while executing WAD template and publishing it to Portal

I get an error message when i try to execute WAD template and publish in portal
//start of error message
Error while loading query metadata
check the query and portal settings
RSBOL 018 Java system error:Exception in method process Function.
//end of error messagge
But when i click "ok" then the template gets executed and published in portal
I want to know why is this error message getting displayed.
BW is at SP14 level (template is created in BI 7.0)
EP is at SP13 level.
Is there any compatibility issue between BW and EP.If so, please let me know.
Please solve this issue.
Thnaks and Regards,
Pradeep

Hi,
take a look:
Note 916090 - RFC-error messages in Web Application Designer 2004s
Hope this helps...
Regards
Andreas

Error while executing WAD report

Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

can u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

Error message in WAD: "No name is specified for modification type 'Module'"

Hi All,
We have created a WAD template with one analysis item and a button and have single module of type generic module in it.
While executing it following error message is displayed "No name is specified for modification type 'Module'"
Please Can anyone help with this error.
Regards,
Shweta.

Hello,
I am currently facing same issue and I have no idea how to get rid of this message on top of the page.
I'm pretty sure that this error message comes from the ANALYSIS_ITEM define in my Web Template but I have defined alias name for the different modules I created:
Who is able to help ?

Error in executing WAD web template

Hi All,
I am executing the query/WAD template.
I can run the query/template but it does not give me data at the output.
I need to execute WAD template which are not giving data at the output.
Currently the template is getting executed but it is showing NO APPLICABLE DATA FOUND
along with it It gives error saying no active transfer structure exists in source system but this is 7.0 data source & I have transformations created for it.
I have tried creating a test query on my multi provider, which gets executed using RSRT but through portal it gives me error as,
system error in program CL_RSR_RRK0_ATTR_C and from CHECKALVL-01
Please provide some pointers to solve the issue.
Thanks & Regards,
Rashmi.

Hi Rashmi,
You try implementing the processes in these SAP Notes for your error while executing the query on multiprovider.
1023404
1003609
1132221
the links for these sap notes are:
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1023404
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1003609
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1132221
With Regards,
Ravi Kanth.

500 Internal Server Error while executing WAD

Hi Everyone,
I am executing a WAD and following the steps as mentioned. Opening a variant dialog box (this will show the values of the variables at that point in time) -> Changing any of the variable values - Clicking OK -> Clicking Cancel button in the Variant dialog -> Clicking on any other tab -> Get a 500 Internal Server Error with the following description. There is no short dump registered in the BY system. Please help me with any possible OSS Notes that would apply to this. Also please note that instead of directly clicking the "Cancel", if i use the "Check" button first and then "Cancel", I do not get this error.
The initial exception that caused the request to fail was:
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:844)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:103)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1350)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:439)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:194)

Hi Ravi,
maybe this is a similar problem to the one discussed
IcmHandleNetWrite(id=0/196): No data from server received (rc = -9).
Also, check ST22 and SM21 if they give some helpful information on this.

Error While executing WAD Template

Hi BW Experts,
I am working on BI7.0
I am getting following error, when I am trying to execute
WAD Template through portal.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex).
Exception id: 07:01_31/07/07_0035_37431450
See the details for the exception ID in the log file
Anybody explain me about this error.
Thanks in advance.
Maruthi

Hi maruthi,
It seems that you dont have the access to the portal, try to login using another userid(or u can use admin's) and PW, also see this portal address included in default IP Addresses.(Tools->Internetoptions->Connections-> Lansettings->advanced.
Regards,
Naren.

Error while executing WAD: " Page cannot be displayed"

Hi All,
I am facing an error while i am executing the WAD template.As soon i execute the template it gives an error as " Page Cannot Be Displayed".
I have just used one table in my template.
Is this some setting issue??
Please give your valuable inputs.
Regards,
Kshitij Mathur-

Kshitij,
Check out the serivces are activated or not?
U can check this Tcode SICF
Select Default host->sap->bw right clik and check if its in deactive mode then activate it and save.
Hope it helps.
Urs,
Rakesh.

Run-time Error '432' in WAD

Hi Experts,
While opening a web template in web application designer, I am getting following error,
Run-time Error '432' :
File name or class name not found during automated operation.
If i press ok, exist from WAD.
I have uninstalled the GUI and installed SAP GUI 6.4 with the latest patch, still getting the error.
It would be a great help if you could provide a solution for this.
Thanks,
Kaushik

We are talking about a small .dll.
No need of installing the OS again. I will say, ask your Windows administrator to look for it. He might look for it on MSDN or may be he will contact Microsoft for it.
Most probably it might be 10 minutes job.
Why don't You look for runtime error 432 in microsoft(MSDN) website.
and even if you reinstall Windows XP, I guess it won't resolve the issue. there are couple of issues I heard with XP and SAP applications.
Tnks
Message was edited by:
Keerti Vemulapalli

Error When Closing WAD

Hi All,
Iam getting an error when i close a single template or when i exit from the WAD the error say Run Time Error. What exactly needs to be done to remove this error.
Thank you all in advance,
Padma

HI,
In order to fix that error you have to apply the latest path to the SAPGUI.
Last week it happened the same thing, so basis team applied path nº18 and the issue was solved.
Please, assigned point if you believe that was a helpful answer

Page cannot be displayed error when executing WAD

Hi all,
I'm getting this error (Page cannot be displayed) when i execute my WAD. What is curious is that i can execute it ok i some machines, but some others get the error.
Anyone knows what could be causing this?
I've tried in different machines, all with Win XP sp2 and IE6 browser... and remains the same: some execute the WAD ok, some don't.
I'll appreciate any help on this.
Thank you,
g.

I had the same error and was a PROXY problem....
I fix it setting in IE connetions the access to HTTP://MYSERVER/...ETC....in LAN Configuration->advanced options in IE....it works fine for me....
Regards...

Run Time Error 521 in WAD

All
I was hoping someone could help.
I am using WAD accessed through BEx (Excel V10)
BW Machine is accessed through SAP GUI 6.20 via Citrix Program Neighborhood V7.1.
The problem is that sometimes when I am cutting and pasting HTML from one Web Template to another, I get a system crash..... <b>Run-time error '521' Can't open clipboard.</b>
I don't get this error anywhere else. Unfortunately I am the only BW bod who accessed WAD in this way.
I'm not sure really if this is a WAD problem or a Citrix problem. Anybody got any ideas how to fix this.
Regards
Simon

We are talking about a small .dll.
No need of installing the OS again. I will say, ask your Windows administrator to look for it. He might look for it on MSDN or may be he will contact Microsoft for it.
Most probably it might be 10 minutes job.
Why don't You look for runtime error 432 in microsoft(MSDN) website.
and even if you reinstall Windows XP, I guess it won't resolve the issue. there are couple of issues I heard with XP and SAP applications.
Tnks
Message was edited by:
Keerti Vemulapalli

Error RSBOLAP 018 WAD 7.0

Similar Messages

Maybe you are looking for