Error RSDMD 194 due to '#" after migration in BI 7
Hi Gurus,
we migrate our server BI in BI 7 and Unicode (from 3.5, non Unicode) and now on 0customer loading we have an error on a few lines RSDMD 194. it seems to be the character '#' is not accepted.
in RSKC we have the customizing ALL_CAPITAL. this load works in BW 3.5.
Do you have any idea for a global solution. because my last possibility is to create a routine to convert the '#' in '-' for example but i want ti understant why it works in 3.5 and not in BI7 with Unicode.
Thanks
CYril
since you have migrated from no-unicode system to unicode some characters may not be permitted. Check whether you have installed the required language packs to support the language you are using. Else you need to use FM or routine to remove the invalid characters.
Similar Messages
-
Master data loading error: RSDMD 194
Hi Experts,
I working on BI7.0,
I have loaded 0Material data upto PSA from R/3 successfuly. When I try
to execute DTP from PSA to 0Material Master data it is giving following error,
but some records loaded successfully from PSA to Target.
0MATERIAL : Data record 1 ('310957 '): Version '310957 ' is not valid RSDMD 194
Diagnosis
Data record 1 & with the key '310957 &' is invalid in value '310957 &'
of the attribute/characteristic 0MATERIAL &.
System Response
The system has recognized that the value mentioned above is invalid, and
has processed this general error message. A subsequent message may give
you more information on the error. This message refers to the same
value, even though it does not state this explicitly.
Procedure
If this message appears during a data load, maintain the attribute in
the PSA maintenance screens. If this message appears in the master data
maintenance screens, leave the transaction and call it again. This
allows you to maintain your master data.
Procedure for System Administration
Kindly advise.
Thanks in advance.
Maruthi.Hi -
I faced the same issue.
Error : 'RSDMD 184'
It was delta load. Initial load went well, but delta failed. I ran the delta after some days after initial load.
The problem was with the source system data. Just check the source data once with R/3 people. Delete data from BW and replicate the data source and activate transfer structure and try loading again.
Tks,
Praveen Tati -
Multi Value error observed in one report after migration from BO 3.1 to BO 4.0
Hi,
Can someone help me resolving the #multivalue error after migration of report from BO 3.1 to 4.0 environment
I have compared all the formulas and they are same in both the
I have observed, if I create a new tab with the report, The multivalue error is not observed
Can somebody please help me regarding this issue
Thanks
JaveedHi Javed,
MultiValue error appears if you have multiple result values for the same row values combination.
Try including an object from object panel which can differentiate the values for that row.
For Example,
Lets say you have an item & you have a keyfigure Invoiced amount where it has 2 different values at schedule line level.
So the values in webi BOBJ depends your BW architecture like how the infoprovider is designed. If your infoprovider has the invoiced amount values based on item and schedule line level then if you dont add the schedule line in webi report, you ll get the "#MULTIVALUE" Error.
If you are using any Variables in the webi Report, try using
=[keyfigure] in [Dimension]
Hope this helps.
Regards,
Naveen -
Error in BI at Transformation after migration from BW Rule (target :ZDTAPAK
Hello Gurus,
I have migrated datasource from BW to BI. The update rule from BW against transformation in BI has routine.
I see an error messgae in "Transformation Display"(screen). error msg is
Rule (target :ZDTAPAKID, group:01 standard Group): syntax error in routine
Rule (target :ZRECNM, group:01 standard Group): syntax error in routine
Rule (target :ZRECORDID, group:01 standard Group): syntax error in routine
Rule (target :ZREQUID, group:01 standard Group): syntax error in routine
when I double click on field/ Rule Name : ZDTAPAKID,ZRECNM,ZRECORDID & ZREQUID on all the four field / rule name and go to Rule Details and against Rule Type : Routine , go to Display Rule and land in Rule Details .
There is see routine isa defined, when I check the syntax of routine I get following error .
E:Field "G_S_MINFO-DATAPAKID" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement
Note: I get same error for all the 4 fields/rule name when I try to check the syntax ZDTAPAKID,ZRECNM,ZRECORDID & ZREQUID
can any one please guide me?
Thank you
Ashwaqhi check note Note 1052648 - Migrating transfer rules and update rules for BW7.x
otherwise try to declare the fields in your generated coding
for example
TYPE-POOLS: RSSM.
DATA :
G_S_MINFO TYPE RSSM_S_MINFO,
ZDTAPAKID TYPE RSDATAPID,
ZRECNM TYPE rssm_s_minfo-requnr,
ZREQUID TYPE RSREQUEST.
Bye
Boujema -
Hi all;
Suppose I have created a two-node Hyper-V cluster with a fibre channel shared storage in Windows Server 2012. Everything work fine except some issues. One of the is that when I want to configure the cluster to add a VM as its cluster resource, the following
error message appears:
An error occurred while determining the state of this clustered role in the cluster. The remote procedure call failed with error 800706BE.
Any ideas?
Thanks
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.Thanks for your reply…
I have tested many possible solutions without any success. The actions that I have done so far are mentioned in the following and the results of them have been said, too.
When I restart the servers, everything are good but after some times when I reopen Failover Cluster Manager on one of the servers, the snap-in related to my cluster name does not load. Please look at the following figure:
And when I want to connect to my cluster name, the following error message appears:
Note: The above problem appears randomly regarding to servers. In the other hand, after the restart, one of the servers acts as the above statement.
The following error message is the result of the DTCPing utility:
++++++++++++hosts
++++++++++++
06-11, 10:02:15.346-->Error(0x424) at clutil.cpp @256
06-11, 10:02:15.346-->-->OpenCluster
06-11, 10:02:15.356-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:02:20.428-->Start DTC connection test
Name Resolution:
SRV04-->172.16.140.11-->SRV04
06-11, 10:02:32.448-->Start RPC test (ADMINISTRATOR1-->SRV04)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
And
06-11, 10:26:10.837-->Error(0x424) at clutil.cpp @256
06-11, 10:26:10.837-->-->OpenCluster
06-11, 10:26:10.837-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:26:14.947-->Start DTC connection test
Name Resolution:
SRV04-->172.16.140.11-->SRV04
06-11, 10:26:26.967-->Start RPC test (ADMINISTRATOR1-->SRV04)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
And
++++++++++++hosts
++++++++++++
06-11, 10:47:51.510-->Error(0x424) at clutil.cpp @256
06-11, 10:47:51.510-->-->OpenCluster
06-11, 10:47:51.510-->-->1060(The specified service does not exist as an installed service.)
++++++++++++++++++++++++++++++++++++++++++++++
DTCping 1.9 Report for ADMINISTRATOR1
++++++++++++++++++++++++++++++++++++++++++++++
RPC server is ready
++++++++++++Validating Remote Computer Name++++++++++++
06-11, 10:47:55.020-->Start DTC connection test
Name Resolution:
SRV03-->172.16.140.10-->SRV03
06-11, 10:48:06.830-->Start RPC test (ADMINISTRATOR1-->SRV03)
Problem:fail to invoke remote RPC method
Error(0x6D9) at dtcping.cpp @303
-->RPC pinging exception
-->1753(There are no more endpoints available from the endpoint mapper.)
RPC test failed
The following output is the result of running PortQuery on port 135 on both servers:
=============================================
Starting portqry.exe -n srv03 -e 135 -p TCP ...
Querying target system called:
srv03
Attempting to resolve name to IP address...
Name resolved to 172.16.140.10
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_ip_tcp:srv03[49152]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv03[49285]
UUID: 367abb81-9844-35f1-ad32-98f038001003
ncacn_ip_tcp:srv03[49159]
UUID: b97db8b2-4c63-11cf-bff6-08002be23f2f Microsoft Cluster Server API
ncacn_ip_tcp:srv03[49156]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv03[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv03[49155]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv03[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv03[49155]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:srv03[\\pipe\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv03[49155]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv03[49157]
UUID: 7f1343fe-50a9-4927-a778-0c5859517bac DfsDs service
ncacn_np:srv03[\\PIPE\\wkssvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:srv03[\\PIPE\\W32TIME_ALT]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_ip_tcp:srv03[49154]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_ip_tcp:srv03[49154]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_ip_tcp:srv03[49154]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_ip_tcp:srv03[49154]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_ip_tcp:srv03[49154]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_ip_tcp:srv03[49154]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_ip_tcp:srv03[49154]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_ip_tcp:srv03[49154]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_ip_tcp:srv03[49154]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_ip_tcp:srv03[49154]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv03[\\PIPE\\srvsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv03[\\PIPE\\atsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_ip_tcp:srv03[49154]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv03[\\PIPE\\srvsvc]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_np:srv03[\\pipe\\eventlog]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_ip_tcp:srv03[49153]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_np:srv03[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_ip_tcp:srv03[49153]
UUID: 76f226c3-ec14-4325-8a99-6a46348418af
ncacn_np:srv03[\\PIPE\\InitShutdown]
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_np:srv03[\\PIPE\\InitShutdown]
Total endpoints found: 51
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n srv03 -e 135 -p TCP exits with return code 0x00000000.
And
=============================================
Starting portqry.exe -n srv04 -e 135 -p TCP ...
Querying target system called:
srv04
Attempting to resolve name to IP address...
Name resolved to 172.16.140.11
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_ip_tcp:srv04[1025]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:srv04[1143]
UUID: 367abb81-9844-35f1-ad32-98f038001003
ncacn_ip_tcp:srv04[1065]
UUID: b97db8b2-4c63-11cf-bff6-08002be23f2f Microsoft Cluster Server API
ncacn_ip_tcp:srv04[1057]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv04[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv04[1028]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_np:srv04[\\pipe\\lsass]
UUID: 0b1c2170-5732-4e0e-8cd3-d9b16f3b84d7 RemoteAccessCheck
ncacn_ip_tcp:srv04[1028]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:srv04[\\pipe\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv04[1028]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:srv04[1084]
UUID: 7f1343fe-50a9-4927-a778-0c5859517bac DfsDs service
ncacn_np:srv04[\\PIPE\\wkssvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 86d35949-83c9-4044-b424-db363231fd0c
ncacn_ip_tcp:srv04[1027]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 3a9ef155-691d-4449-8d05-09ad57031823
ncacn_ip_tcp:srv04[1027]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: a398e520-d59a-4bdd-aa7a-3c1e0303a511 IKE/Authip API
ncacn_ip_tcp:srv04[1027]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 552d076a-cb29-4e44-8b6a-d15e59e2c0af IP Transition Configuration endpoint
ncacn_ip_tcp:srv04[1027]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 2e6035b2-e8f1-41a7-a044-656b439c4c34 Proxy Manager provider server endpoint
ncacn_ip_tcp:srv04[1027]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c36be077-e14b-4fe9-8abc-e856ef4f048b Proxy Manager client server endpoint
ncacn_ip_tcp:srv04[1027]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c49a5a70-8a7f-4e70-ba16-1e8f1f193ef1 Adh APIs
ncacn_ip_tcp:srv04[1027]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 98716d03-89ac-44c7-bb8c-285824e51c4a XactSrv service
ncacn_ip_tcp:srv04[1027]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 1a0d010f-1c33-432c-b0f5-8cf4e8053099 IdSegSrv service
ncacn_ip_tcp:srv04[1027]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_ip_tcp:srv04[1027]
UUID: c9ac6db5-82b7-4e55-ae8a-e464ed7b4277 Impl friendly name
ncacn_np:srv04[\\PIPE\\srvsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv04[\\PIPE\\atsvc]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_ip_tcp:srv04[1027]
UUID: 30b044a5-a225-43f0-b3a4-e060df91f9c1
ncacn_np:srv04[\\PIPE\\srvsvc]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_np:srv04[\\pipe\\eventlog]
UUID: f6beaff7-1e19-4fbb-9f8f-b89e2018337c Event log TCPIP
ncacn_ip_tcp:srv04[1026]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 30adc50c-5cbc-46ce-9a0e-91914789e23c NRP server endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_np:srv04[\\pipe\\eventlog]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d6 DHCPv6 Client LRPC Endpoint
ncacn_ip_tcp:srv04[1026]
UUID: 76f226c3-ec14-4325-8a99-6a46348418af
ncacn_np:srv04[\\PIPE\\InitShutdown]
UUID: d95afe70-a6d5-4259-822e-2c84da1ddb0d
ncacn_np:srv04[\\PIPE\\InitShutdown]
Total endpoints found: 50
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n srv04 -e 135 -p TCP exits with return code 0x00000000.
I have read the KB197814 and did the steps in it, restarted both servers, but the problem did not resolved.
I have check both servers for RPC Service status and in both servers it has started.
The both servers are alive and can ping each other by their IP address and name.
The firewall of both servers is off and I stopped the Windows Firewall service COMPLETELY.
Any services and applications that are depending on RPC have problems. For example when I want o remotely manages the services on these servers by using Services.msc console, the following error message appears:
Error 1726: The remote procedure call failed.
Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Problems after migrating application from 10.1.2 to 10.1.3
Hi,
I am encountering the following error while executing the application after migrating it from Jdeveloper10.1.2 to JDeveloper10.1.3. Could you please help me in this regard..
NOTIFICATION J2EE JSP0008 Unable to dispatch JSP Page : java.lang.NullPointerException
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:60)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:416)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:478)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:401)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:629)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:218)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:119)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:230)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:33)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:831)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:595)
Message was edited by:
user491067Do you have the problem with all JSP pages, or only a few of them ?
Does it happen in the Embedded OC4J only ?
Could you try to deploy your application in the Standalone OC4J and test it from there ?
I had a similar issue where the Embedded OC4J was unnable to run big JSP pages.
There was no problem with the Standalone OC4J.
Hope this helps,
Didier. -
After migrating all of my adobe software (Cs4, cs5, etc.) to my new imac, the software won't open due to many errors. Any help on this?
Welcome to the Apple Support Communities
Adobe software is conflictive when you use Migration Assistant because their applications don't work properly after migration. If you keep the DVDs or the installers of your software, use them to reinstall all your Adobe applications and they should start working correctly -
NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g
NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya -
I am currently testing our website with CF11. It is currently working with CF8 however after migrating it to a new server running CF11 I have encountered the following error.
The value returned from the load function is not of type numeric.
The error occurred in
D:/Applications/CFusion/CustomTags/nec/com/objects/address.cfc: line 263
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/contact.cfc: line 331
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 510
Called from D:/Applications/CFusion/CustomTags/nec/com/objects/user.cfc: line 1675
Called from D:/website/NECPhase2/action.validate.cfm: line 54
261 : <cfif isNumeric(get.idCountry)>
262 : <cfset rc = this.objCountry.setID(get.idCountry)>
263 : <cfset rc = this.objCountry.load()>
264 : </cfif>
265 : <cfset this.sPostcode = get.sPostcode>
Have there been any changes between CF8 and CF11 that could cause this error?
Does anyone have ideas?This is the code in file object file country.cfc (nec.com.objects.country):
<cfcomponent displayname="Country object" hint="This is a Country object, it allows you to access and set values in the Country.">
<!---
// Construct this object
--->
<cfset this.objFunctions = CreateObject( 'component', 'nec.com.system.functions' )>
<cfscript>
this.idCountryID = 0;
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>
<!---
// The following functions are the setters and getters. offering us a better way to get
// at the contents of the object
--->
<!---
// Getters
--->
<cffunction name="getID" displayname="Get ID" returntype="numeric" output="false" hint="This returns the ID of the current item.">
<cfreturn this.idCountryID>
</cffunction>
<cffunction name="getsCountryName" displayname="Get sCountryName" returntype="string" output="false" hint="This gets the sCountryName value of this item.">
<cfreturn this.sCountryName>
</cffunction>
<cffunction name="getsISOCode" displayname="Get sISOCode" returntype="string" output="false" hint="This gets the sISOCode value of this item.">
<cfreturn this.sISOCode>
</cffunction>
<cffunction name="getsDHLCode" displayname="Get sDHLCode" returntype="string" output="false" hint="This gets the sDHLCode value of this item.">
<cfreturn this.sDHLCode>
</cffunction>
<cffunction name="iError" displayname="Get iError" returntype="numeric" output="false" hint="This returns the iError of the current item.">
<cfreturn this.iError>
</cffunction>
<!---
// Setters
--->
<cffunction name="setID" displayname="Set ID" returntype="boolean" output="false" hint="This sets the ID value of this item.">
<cfargument name="idCountryID" required="true" type="numeric" displayname="ID" hint="The ID to use.">
<cfset this.idCountryID = arguments.idCountryID>
<cfreturn true>
</cffunction>
<cffunction name="setsCountryName" displayname="Set sCountryName" returntype="boolean" output="false" hint="This sets the sCountryName value of this item.">
<cfargument name="sCountryName" required="true" type="string" displayname="sCountryName" hint="The sCountryName to use.">
<cfset this.sCountryName = arguments.sCountryName>
<cfreturn true>
</cffunction>
<cffunction name="setsISOCode" displayname="Set sISOCode" returntype="boolean" output="false" hint="This sets the sISOCode value of this item.">
<cfargument name="sISOCode" required="true" type="string" displayname="sISOCode" hint="The sISOCode to use.">
<cfset this.sISOCode = arguments.sISOCode>
<cfreturn true>
</cffunction>
<cffunction name="setsDHLCode" displayname="Set sDHLCode" returntype="boolean" output="false" hint="This sets the sDHLCode value of this item.">
<cfargument name="sDHLCode" required="true" type="string" displayname="sDHLCode" hint="The sDHLCode to use.">
<cfset this.sDHLCode = arguments.sDHLCode>
<cfreturn true>
</cffunction>
<!---
// Clear, to empty out the contents of this object
--->
<cffunction name="clear" displayname="Clear items Details" returntype="boolean" output="false" hint="Clears out all of the items details.">
<cfscript>
this.sCountryName = "";
this.sISOCode = "";
this.sDHLCode = "";
this.iErrorID = "";
</cfscript>
<cfreturn true>
</cffunction>
<!---
// The following functions deal with the load, save and deleting of objects
--->
<!---
// Load
--->
<cffunction name="load" displayname="Load items details" returntype="numeric" output="false" hint="This loads in all the information about an item.">
<cfset rc = this.clear()>
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Check to see if it exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("load: checkID: '#this.idCountryID#' #cfcatch.detail#");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif not checkID.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
if(isDefined("session.afr")){
whichOne = "#session.afr.getsAFRNumber()#";
} else {
whichOne = "";
iErrorID = objError.addError("A Country with that id doesn't exists.[#this.idCountryID#][#whichOne#]");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfif>
<!---
// If we got past all then then load in the details
--->
<cftry>
<cfquery name="get" datasource="#sDatasource#">
SELECT idCountryID, RTRIM(sCountryName) as sCountryName, RTRIM(sISOCode) as sISOCode, RTRIM(sDHLCode) as sDHLCode
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("load: get: #cfcatch.detail#");
</cfscript>
<cfset this.iErrorID = iErrorID>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfset this.idCountryID = get.idCountryID>
<cfset this.sCountryName = get.sCountryName>
<cfset this.sISOCode = get.sISOCode>
<cfset this.sDHLCode = get.sDHLCode>
<cfset this.iErrorID = "">
<cfreturn true>
</cffunction>
<!---
// Save
--->
<cffunction name="save" displayname="Save items Details" returntype="numeric" output="false" hint="Saves (to some source) the current details for the ID of the item.">
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Now check to see if ithat ID exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("save: checkID: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<!---
// If it doesn't exist, then add the record, otherwise update the record
--->
<cfif not checkID.recordCount>
<cfreturn this.add()>
<cfelse>
<cfreturn this.update()>
</cfif>
</cffunction>
<!---
// Add
--->
<cffunction name="add" displayname="Add Country" returntype="numeric" output="false" hint="This adds a Country.">
<!---
// Check to see if that a different item isn't already using the same unique details
--->
<cftry>
<cfquery name="checkUnique" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#'
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("add: checkUnique: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkUnique.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("A Country with that name or ISO code already exists. idCountryID=#checkUnique.idCountryID#");
</cfscript>
<cfreturn iErrorID>
</cfif>
<cftry>
<cfquery name="add" datasource="#sDatasource#">
SET nocount on
INSERT INTO tblCountry(sCountryName, sISOCode, sDHLCode)
VALUES('#this.objFunctions.scrubText(this.sCountryName)#','#this.objFunctions.scrubText(t his.sISOCode)#','#this.objFunctions.scrubText(this.sDHLCode)#')
SELECT @@identity as autoID
SET nocount off
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("add: add: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn add.autoID>
</cffunction>
<!---
// Update
--->
<cffunction name="update" displayname="Update Country" returntype="numeric" output="false" hint="This updates a Country record.">
<!---
// Check to see if that a different item isn't already using the same unique details
--->
<cftry>
<cfquery name="checkUnique" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE (sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#'
OR sISOCOde = '#this.objFunctions.scrubText(this.sISOcode)#')
AND idCountryID <> #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("update: checkUnique: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkUnique.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("Another Country with that name already exists. idCountryID=#checkUnique.idCountryID#");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Attempt to update the record to the datasource
// if this fails for any reason then we submit an error message
// to the error component and return the ID of the error
--->
<cftry>
<cfquery name="update" datasource="#sDatasource#">
UPDATE tblCountry
SET sCountryName = '#this.objFunctions.scrubText(this.sCountryName)#',
sISOCode = '#this.objFunctions.scrubText(this.sISOCode)#',
sDHLCode = '#this.objFunctions.scrubText(this.sDHLCode)#'
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("update: update: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
<!---
// Delete
--->
<cffunction name="delete" displayname="Delete Country" returntype="numeric" output="false" hint="This deletes a Country record.">
<!---
// First of all we need to get the name of the data source we are going to be using
--->
<cfscript>
objDS = CreateObject("component","nec.com.system.settings");
sDatasource = objDS.getDatasource();
</cfscript>
<!---
// Now check to see if ithat ID exists
--->
<cftry>
<cfquery name="checkID" datasource="#sDatasource#">
SELECT idCountryID
FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: checkID: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif not checkID.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("A Country with that id doesn't exists, delete failed.");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Now check to see if there are any dependancies, if so we can't delete the item
--->
<cftry>
<cfquery name="checkDependancies" datasource="#sDatasource#">
SELECT idCountry
FROM tblAddress
WHERE idCountry = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: checkDependancies: idCountry: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfif checkDependancies.recordCount>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("That Country is being used by an address, delete failed.");
</cfscript>
<cfreturn iErrorID>
</cfif>
<!---
// Now attempt to remove the record.
// if this fails for any reason then we submit an error message
// to the error component and return the ID of the error
--->
<cftry>
<cfquery name="delete" datasource="#sDatasource#">
DELETE FROM tblCountry
WHERE idCountryID = #this.idCountryID#
</cfquery>
<cfcatch>
<cfscript>
objError = CreateObject("component","nec.com.system.errors");
iErrorID = objError.addError("delete: delete: #cfcatch.detail#");
</cfscript>
<cfreturn iErrorID>
</cfcatch>
</cftry>
<cfreturn this.idCountryID>
</cffunction>
</cfcomponent> -
after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"
You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC. -
Hello,
I am getting an error 'CalendarNotify' as null or undefined in the code at SP.UI.ApplicationPages.CalendarNotify in SharePoint 2013 after migration from SharePoint 2010. The SharePoint calendar is customized to display the events with colors and other
customizations.
It was developed in SharePoint 2010 using client side objects /jquery. After migration to 2013 stopped working.
The code looks like in the following url...
http://www.westpoint.edu/news/SiteAssets/ColorCoding.txt
Thanks in advance.Hi,
According to your description, my understanding is that the CalendarNotify is null after migrating to SharePoint 2013.
I suggest you can check if the sp.js has been loaded properly using Internet Explorer Developing Tools. We can use the following script to run function after the sp.js has been loaded.
ExecuteOrDelayUntilScriptLoaded(somefunction(), "sp.js");
Here is a detailed article for your reference:
http://msdn.microsoft.com/en-us/library/jj193034.aspx
Best Regards
Zhengyu Guo
TechNet Community Support -
Configuration Frozen Error after migrating to Weblogic 11g console extensio
We are using the console extension property of weblogic.
The jar used to deploy the same works fine with weblogic9 but gives the below error after migrating to Weblogic 10.3
The project also uses struts-Tiles configuartion. Is there any specific configuration to do after migration with respect to console extension?????
com.bea.portlet.adapter.scopedcontent.ActionLookupFailedException: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:697)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.render(StrutsStubImpl.java:107)
at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:292)
at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:428)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:727)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:739)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:211)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:196)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: javax.servlet.ServletException: java.lang.IllegalStateException: Configuration is frozen
at org.apache.beehive.netui.util.internal.ServletUtils.throwServletException(ServletUtils.java:165)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:582)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1230)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
... 63 more
Caused by: java.lang.IllegalStateException: Configuration is frozen
at org.apache.struts.config.ForwardConfig.setPath(ForwardConfig.java:191)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processForwardConfig(ConsolePageFlowRequestProcessor.java:145)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
... 72 moreAfter more investigations I have more details:
1. the error does not occur if the base table does not have rowSelection=”single”
2. the error does not occur if the base table has rowSelection=”single” but the popup is raised with showPopupBehavior
3. the error only occurs when the base table has rowSelection=”single” and we call the popup as inline popup (taskFlow with jsf page)
I could not reproduce the error on a newly created application in Jdevelope 11.1.2.1, it only happens to migrated applications.
We can not give up to rowSelection=”single” because of master-detail structures.
Thank you,
Monica -
Open role permission error after migration EP6 to EP7
Hi all,
After migration from ep6(WAS 620) to EP7, there are some roles which can't edit permission by content administration.
The error message appears when open edit role permission.
========================= Error Start Line=========================================
ERROR: updateParentData - aclHandle is null for objectID - null
Exception ID:05:29_23/06/08_0006_9615650
EXCEPTION
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.aclEditor
Component class : com.sap.portal.admin.acleditor.ACLEditor
User : Administrator
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.NullPointerException
at com.sap.portal.admin.editor.pane.OutPane.calculatePEObjectId(OutPane.java:210)
at com.sap.portal.admin.editor.pane.OutPane.createEditorLayout(OutPane.java:256)
at com.sap.portal.admin.editor.pane.OutPane.setupComponent(OutPane.java:150)
at com.sap.portal.admin.editor.pane.EditorPaneWrapper.mySetupComponent(EditorPaneWrapper.java:143)
at com.sapportals.admin.wizardframework.components.FlowContainer.setupComponent(FlowContainer.java:129)
at com.sapportals.admin.wizardframework.core.TrivialPaneFactory.getComponent(TrivialPaneFactory.java:35)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:229)
at com.sap.portal.admin.editor.Editor.doWizard(Editor.java:605)
at com.sap.portal.admin.editor.Editor.run(Editor.java:150)
at com.sap.portal.admin.editor.AbstractEditorComponent.doContent(AbstractEditorComponent.java:59)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
========================= Error End Line=========================================
Does anyone have idea about this problem ?close
-
Buffer to small ORA-22835 error after migration from 9i to 10g
Hello Oracle-Experts,
I had to calculate hash-values for a corresponding clob-field which worked with oracle 9i (9.0.2.1)
After migration to oracle 10g (10.2.0.1.0) I get an ORA-22835 error (Buffer too small for CLOB to CHAR conversion.
Here is the output for the 10g version:
SQL*Plus: Release 10.2.0.1.0 - Production on Mi Jun 13 16:19:28 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Verbunden mit:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> CREATE TABLE test_conv (value CLOB);
Tabelle wurde erstellt. (Table created.)
SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
2 BEGIN
3 INSERT INTO test_conv(value) VALUES (vLong);
4 END;
5 /
PL/SQL-Prozedur erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv
FEHLER in Zeile 1:
ORA-22835: Puffer zu klein für Konvertierung von CLOB zu CHAR oder BLOB zu RAW
(tatsächlich: 4400, maximal: 4000)
(Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4400, maximum: 4000))
This is the result with 9i
Verbunden mit:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL> CREATE TABLE test_conv (value CLOB);
Tabelle wurde angelegt. (Table created.)
SQL> DECLARE vLong LONG:= LPAD('M',4400,'M');
2 BEGIN
3 INSERT INTO test_conv(value) VALUES (vLong);
4 END;
5 /
PL/SQL-Prozedur wurde erfolgreich abgeschlossen. (PL/SQL procedure successfully completed.)
SQL> SELECT dbms_utility.get_hash_value(value,1,power(2,30)) from test_conv;
DBMS_UTILITY.GET_HASH_VALUE(VALUE,1,POWER(2,30))
478332438
Any help is appreciated.
Best Regards
MatthiasYou have hit a bug, 3984527 - CLOB LARGER THAN 4000 INSERTED INTO VARCHAR2(4000) COLUMN IS.
You may want to check this metalink note: Note:388512.1 for further explanation and workarouds.
From the error message manual, Verbatim:
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: string, maximum: string)
Cause: An attempt was made to convert CLOB to CHAR or BLOB to RAW, where the LOB size was bigger than the buffer limit for CHAR and RAW types. Note that widths are reported in characters if character length semantics are in effect for the column, otherwise widths are reported in bytes.
Action: Do one of the following:
1. Make the LOB smaller before performing the conversion, for example, by using SUBSTR on CLOB
2. Use DBMS_LOB.SUBSTR to convert CLOB to CHAR or BLOB to RAW.
~ Madrid. -
Dear Members,
The driver program for the smartfrom which I have created is throwing a dump error after migration to another server, please suggest me a solution.
Thanks,
Subhendu GoudaHello Subhendu,
Just pass the FM name of your smartfom using a variable like "w_fmodule".
* Variable declarations
DATA:
w_form_name TYPE tdsfname VALUE 'ZSUBHENDU_TEST',
w_fmodule TYPE rs38l_fnam,
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION w_fmodule
EXPORTING
control_parameters = w_cparam
output_options = w_outoptions
IMPORTING
job_output_info = t_otf_from_fm
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope this solves your issue.
Cheers,
Suvendu
Maybe you are looking for
-
When I get sound notifications from any kde programm ( kopete for example) and when current track in Juk ended (after sound notification), volume in Juk always up to 100%. what could go wrong? if after notification I reset volume, it don't increase L
-
Problem with store ResultSet and show result in table
Hi, I'm kind of new in ADF, I need to store ResultSet and show result in table-component. I have two problems: 1) I get my ResultSet by calling callStoredProcedure(...) and this returns actually ref_cursor as ResultSet. When I try to println() contai
-
Viewer won't output to NTSC monitor in FCP5.1
Hello! I was used to being able to view my clips in the viewer on my ntsc monitor in HD, since upgrading to FCPStudio5.1.1, I can't seem to find an option for this, the manual mentions none, and a search provided no answer related to the viewer. I am
-
File association changes won't stick
I have a bunch of .svg files that I want to associate with the software for my Silhouette digital cutting machine. I do the whole procedure - go to Get Info, then change Open with: to Silhouette instead of Safari, then choose Always Open With, then c
-
How can BI recognize business event into transactional environment?
Dear colleagues: As I have been looking forward to figure out BW based BAM solutions, such as to implement BW to recognize business event into Transactional applications I just found the TechEd 2008 BPX Community winner proposal Operational BI-Embedd