Error running Flex mobile application on desktop

I bought Flash Builder 4.5 and installed the 4.5.1 patch.
When I create a very simple mobile application for Google Android, it will not run on the Desktop (using the Samsung Vibrant model - or other models).
I added a label to the HomeView.
Then I run the application on the desktop and the label will not appear.
I have tried other components as well but to no avail.
It was working fine before I applied the 4.5.1 patch.
Help is much appreciated.
Dick

Make sure there is no Errors in the errors tab... If there is an error, the last working version of the project will be run (the empty one)

Similar Messages

Error While Running the Mobile Application.

Hi friends,
In SAP MI 7.1 I have Successfully done the following steps:-
1. Created and build the service.
2. Created and build the UI.
3. Created and Build the application.
as per the tutorial available in the link
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e5f99c6f472e98e10000000a155369/frameset.htm
After deploying , When I am trying to run the mobile application . I am getting the below shown error.
java.lang.IllegalStateException: com/sap/sdb/minDB/DriverEmbeddedMinDB (Unsupported major.minor version 48.0)
 at com.sap.tc.mobile.cfs.compat.Context.getPersistenceManager(Context.java:41)
 at com.sap.tc.mobile.cfs.compat.Context.getPersistenceManager(Context.java:28)
 at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init(FrameworkInitializer.java:76)
 at java.lang.reflect.Method.invoke(Native Method)
 at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source)
Error starting the framework
java.lang.reflect.InvocationTargetException: java.lang.IllegalStateException: Cannot initialize framework
 at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init(FrameworkInitializer.java:146)
 at java.lang.reflect.Method.invoke(Native Method)
 at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source)
Also in the Netweaver prefrences /Mobile/handhelds/runtime settings/ when I click on launch simulator . It gives the same error.
Please Suggest.
Regards
Nitesh.

 Thanks a lot Alen . The reply was usefull. 
Now after deploying when I am running the application in mobile handheld Simulator . It gives the below shown exception 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionLocalizeHelper:) Thread: main Error: Resourcebundle sap.comtcmobilewdlitecontainer could not be found. Trying to use the default bundle. 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.cfs.pers.PersistenceManager:release resultset) Thread: Finalizer Error: java.sql.SQLException: Result set is closed 
2009-11-04 13:39:40 ... Thread: main Error: Internal Error. Please check the log file. --> 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionHandler:) Thread: main Error: Internal Error. Please check the log file. 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionLocalizeHelper:) Thread: main Error: Resourcebundle sap.comtcmobilewdlitecontainer could not be found. Trying to use the default bundle. 
2009-11-04 13:39:40 ... Thread: main Error: Internal Error. Please check the log file. --> 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionHandler:) Thread: main Error: Internal Error. Please check the log file. 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionLocalizeHelper:) Thread: main Error: Resourcebundle sap.comtcmobilewdlitecontainer could not be found. Trying to use the default bundle.
java.lang.NullPointerException 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.launchApplication(WDLite.java:77) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.launchApplication(WDLite.java:85) 
 at com.sap.tc.mobile.wdlite.container.AppMenuView.startApp(AppMenuView.java:561) 
 at com.sap.tc.mobile.wdlite.container.AppMenuView.onActionLaunchApp(AppMenuView.java:325) 
 at com.sap.tc.mobile.wdlite.container.AppMenuView.invokeEventHandler(AppMenuView.java:368) 
 at com.sap.tc.mobile.wdlite.progmodel.core.AbstractViewElement.doHandleEvent(AbstractViewElement.java:199) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIElement.doHandleEvent(UIElement.java:353) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIImageButton.mouseReleased(UIImageButton.java:152) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIElement.dispatchMouseReleasedWidgetEvent(UIElement.java:396) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIElement$1.mouseReleased(UIElement.java:439) 
 at com.sap.tc.mobile.wdlite.renderer.swt.MouseEventDispatcher.mouseUp(SWTControl.java:372) 
 at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:137) 
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) 
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928) 
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348) 
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968) 
 at com.sap.tc.mobile.wdlite.renderer.swt.container.WorkingArea.refresh(WorkingArea.java:129) 
 at com.sap.tc.mobile.wdlite.renderer.api.RenderingManager.refresh(RenderingManager.java:231) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.refresh(Application.java:24) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.navigate(Application.java:176) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.enter(Application.java:19) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.setCurrentApplication(WDLite.java:148) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.launchApplication(WDLite.java:80) 
 at com.sap.tc.mobile.wdlite.framework.ApplicationLauncher.start(ApplicationLauncher.java:101) 
 at com.sap.tc.mobile.wdlite.framework.Start.runOnContext(Start.java:576) 
 at com.sap.tc.mobile.wdlite.framework.Start.startApplication(Start.java:600) 
 at com.sap.tc.mobile.wdlite.framework.Start.startContainer(Start.java:637) 
 at com.sap.tc.mobile.cfs.framework.spi.FrameworkManager.startContainer(FrameworkManager.java:261) 
 at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init(FrameworkInitializer.java:139) 
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 
 at java.lang.reflect.Method.invoke(Method.java:324) 
 at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source) 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionLocalizeHelper:) Thread: main Error: Resourcebundle sap.comtcmobilewdlitecontainer could not be found. Trying to use the default bundle. 
2009-11-04 13:39:40 ... Thread: main Error: Application launch failed. --> 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionHandler:) Thread: main Error: Application launch failed. 
2009-11-04 13:39:40 ... (com.sap.tc.mobile.wdlite.renderer.exception.OCAExceptionLocalizeHelper:) Thread: main Error: Resourcebundle sap.comtcmobilewdlitecontainer could not be found. Trying to use the default bundle. 
java.lang.ClassCastException 
 at com.sap.demo.order_sv.service.impl.OrderService.generateTestData(OrderService.java:52) 
 at com.sap.orderapp.comp.OrderComp.generateTestData(OrderComp.java:175) 
 at com.sap.orderapp.comp.OrderComp.wdDoInit(OrderComp.java:73) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Controller.enter(Controller.java:21) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Component.enter(Component.java:24) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.setCurrentComponent(Application.java:125) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.navigate(Application.java:155) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.enter(Application.java:19) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.setCurrentApplication(WDLite.java:148) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.launchApplication(WDLite.java:80) 
 at com.sap.tc.mobile.wdlite.container.AppMenuView.startApp(AppMenuView.java:561) 
 at com.sap.tc.mobile.wdlite.container.AppMenuView.onActionLaunchApp(AppMenuView.java:325) 
 at com.sap.tc.mobile.wdlite.container.AppMenuView.invokeEventHandler(AppMenuView.java:368) 
 at com.sap.tc.mobile.wdlite.progmodel.core.AbstractViewElement.doHandleEvent(AbstractViewElement.java:199) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIElement.doHandleEvent(UIElement.java:353) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIImageButton.mouseReleased(UIImageButton.java:152) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIElement.dispatchMouseReleasedWidgetEvent(UIElement.java:396) 
 at com.sap.tc.mobile.wdlite.renderer.api.UIElement$1.mouseReleased(UIElement.java:439) 
 at com.sap.tc.mobile.wdlite.renderer.swt.MouseEventDispatcher.mouseUp(SWTControl.java:372) 
 at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:137) 
 at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66) 
 at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:928) 
 at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3348) 
 at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2968) 
 at com.sap.tc.mobile.wdlite.renderer.swt.container.WorkingArea.refresh(WorkingArea.java:129) 
 at com.sap.tc.mobile.wdlite.renderer.api.RenderingManager.refresh(RenderingManager.java:231) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.refresh(Application.java:24) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.navigate(Application.java:176) 
 at com.sap.tc.mobile.wdlite.progmodel.core.Application.enter(Application.java:19) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.setCurrentApplication(WDLite.java:148) 
 at com.sap.tc.mobile.wdlite.progmodel.core.WDLite.launchApplication(WDLite.java:80) 
 at com.sap.tc.mobile.wdlite.framework.ApplicationLauncher.start(ApplicationLauncher.java:101) 
 at com.sap.tc.mobile.wdlite.framework.Start.runOnContext(Start.java:576) 
 at com.sap.tc.mobile.wdlite.framework.Start.startApplication(Start.java:600) 
 at com.sap.tc.mobile.wdlite.framework.Start.startContainer(Start.java:637) 
 at com.sap.tc.mobile.cfs.framework.spi.FrameworkManager.startContainer(FrameworkManager.java:261) 
 at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init(FrameworkInitializer.java:139) 
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) 
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) 
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) 
 at java.lang.reflect.Method.invoke(Method.java:324) 
 at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source) 
Please Suggest 
 
 
It will be a great help. 
Regards
Nitesh.
Edited by: Nitesh Harit on Nov 4, 2009 2:22 PM

Flex iPad Application : Run code before application enters background Application Type: Flex Mobile Application Target Platform: iPad AIR Version: 4.0 Development Environment: Flash builder 4.6 I want to run some code just before iphone application goes

Application Type: Flex Mobile Application
Target Platform: iPad
AIR Version: 4.0
Development Environment: Flash builder 4.6
I want to run some code just before iphone application goes into background. I need function similar to didEnterBackground
of native xcode app
(https://developer.apple.com/library/ios/documentation/UIKit/Reference/UIApplicationDelegat e_Protocol/Reference/Reference.h
tml#//apple_ref/occ/intfm/UIApplicationDelegate/applicationDidEnterBackground:)
I tried using devactivated function of flash.display.STAGE.
I used following addEventListener:
STAGE = this.parent.stage;
STAGE.addEventListener(Event.DEACTIVATE, onAppDeactivated);
It worked for me but only when device is connected to development environment in debug mode. When I create my release build
it is not working.
So how can I make sure that my code runs before application goes into background.

Even I am facing almost same issue
Problem installing Adhoc version to iPhone and iPad - Development Environment Is - Adobe Flash CS6

Converting Burrito Flex Mobile App to Desktop

Hi Guys! Have just developed an app for Android using Burrito. It works nicely on a phone but it is also great as a little 'widget like' desktop app.
Is there any way to package it so that it may be distributed as an Air app that runs exactly like it does when run in emulation mode (adl) from Flash Builder? If not, what is the simplest path to convert the <mobileApplication> to a <windowedApplication>?
Thanks,
Richard
Update: Surprised no one has answered this. I am new to Flash Builder and I figured you guys would know. Have been looking at viewstacks in standard Air apps and trying to figure how to use this to achieve the same effect as a mobile app. Looks like quite a lot of work to rewrite the app to Air on the Desktop ... is there an easier route .... anyone?

Hi Richard,
I was able to complile and deploy my Android app using command line air/android packaging and adding required air swc's to my project. I used the following packageApplication.bat(downloaded from livedocs) to package my MobileApplication as both an air app and android:
:: AIR application packaging
:: More information:
:: http://livedocs.adobe.com/flex/3/html/h ... ml#1035959
:: Path to Flex SDK and ANDROID binaries
set PATH=%PATH%;C:\Program Files (x86)\Adobe\Adobe Flash Builder Burrito\sdks\4.5.0\bin;C:\Program Files (x86)\Adobe\Adobe Flash Builder Burrito\jre\bin
:: commented set PATH=%PATH%;C:\PATH_TO_YOUR_ANDROID_SDK\android-sdk-windows\tools
echo PATH Set to %PATH%
:: Signature (see 'CreateCertificate.bat')
set CERTIFICATE=testCert.p12
set SIGNING_OPTIONS=-storetype pkcs12 -keystore %CERTIFICATE%
if not exist %CERTIFICATE% goto certificate
echo CERTIFICATE_FILE: %CERTIFICATE%
:: Output AIR
if not exist air md air
set AIR_FILE=air/FlashClientMobile.air
echo AIR_FILE: %AIR_FILE%
:: Output APK
if not exist apk md apk
set APK_FILE=apk/FlashClientMobile.apk
echo APK_FILE: %APK_FILE%
:: Input
set APP_XML=FlashClientMobile-app.xml
set FILE_OR_DIR=FlashClientMobile.swf assets
echo APP_XML: %APP_XML%
echo FILE_OR_DIR: %FILE_OR_DIR%
:: MEecho Signing AIR setup using certificate %CERTIFICATE%.
echo AIR COMMAND adt -package %SIGNING_OPTIONS% %AIR_FILE% %APP_XML% %FILE_OR_DIR%
call adt -package %SIGNING_OPTIONS% %AIR_FILE% %APP_XML% %FILE_OR_DIR%
if errorlevel 1 goto failed
:: echo.
:: echo AIR setup created: %AIR_FILE%
:: echo.
echo Signing APK setup using certificate %CERTIFICATE%.
call adt -package -target apk %SIGNING_OPTIONS% %APK_FILE% %APP_XML% %FILE_OR_DIR%
if errorlevel 1 goto failed2
echo.
echo APK setup created: %APK_FILE%
echo.
:: APK INSTALL
echo Installing package... %APK_FILE%
call adb install %APK_FILE%
if errorlevel 1 goto failed2
echo.
echo Android setup installed: %APK_FILE%
echo.
goto end
:certificate
echo Certificate not found: %CERTIFICATE%
echo.
echo Troubleshotting:
echo A certificate is required, generate one using 'CreateCertificate.bat'
echo.
goto end
:failed
echo AIR setup creation FAILED.
echo.
echo Troubleshotting:
echo did you configure the Flex SDK path in this Batch file?
echo.
:failed2
echo Android install FAILED.
echo.
:end
pause
//END BATCH FILE
I then did a diff between a Flex Buritto Moblie/AIR project library swc's included and identified swc included in AIR and missing in mobile. I updated the project libraries by adding the following swc's:
sparkskins.swc
utilities.swc
aircore.swc
airframework.swc
airspark.swc
applicationupdater.swc
applicationupdater_ui.swc
Then performed a clean build and ran packageApplication from my bin-debug dir and was successfully able to install and run the mobile application on the desktop :-).
Being new to supporting mobile phones, tablets, TV screens along with our web and desktop clients I am not yet sure how we will structure our projects and get maximum code reuse and UI consistancy across these form factors. I have already created a common library project containing all remote stubs, value objects and common utilities and am still trying to figure out how much mileage I can get out of my mobile views. I like the View Navigator and ActionBar navigation on all screens we support and am thinking to extend the ViewNavigator and add additional states along with the 'portrait' and 'landscape' currently offered, like 'portraitPhone', 'portraitTablet', 'portraitTV', 'portraitPC' and leverage my existing mobile views to use these states to adjust the UI layout to accomodate the new realestate... but still learning...
Hope that helps!
Cheers,
Greg

Flash Builder 4.5: debugging Flex Mobile application on Android Virtual Device

Hi,
we are trying without success to debug a flex mobile application in Flash Builder 4.5 on an Android Virtual Device (AVD).
We can debug with real Android devices via Flash Builder 4.5, by using a standard Mobile Application debug configuration with "On device" launch method, but emulated devices are not listed in the "Choose device" Flash Builder 4.5 window.
The emulated device is correctly listed by "adb" command line tool, as the following screenshot shows:
c:\Program Files (x86)\Adobe\Adobe Flash Builder 4.5\sdks\4.5.0\lib\android\bin\adb" devices
List of devices attached
emulator-5554 device
("emulator-5554" has been created and started with Android AVD Manager standard Eclipse plug-in)
By using the adb command-line tool we can also install applications on the emulated device, but we'd like to use Flash Builder 4.5 directly, without manually using adb.
Many thanks in advance for any direction.
PS: we can debug with Flash Builder "internal" android emulator (the one used with "On desktop" launch method), but we want to use the more "realistics" android emulated devices provided by Android SDK (Android Virtual Device (AVD)).

well that's just ... oh what's the word I'm looking for? ... um ... ah yes - inconvenient.
I've been wrestling with this too. I use VDs with eclipse all the time, I'm wondering why it's not supported in flashbuilder. I mean, it's just a VD that runs on a virtual port, plugs into the editor like a read device would - right?
I'm going to take a wild stab at this and say it probably has something to do with running a program inside (Air) a virtual machine, running inside a virtual machine inside a virtual device?

Transforming a flash application to flex mobile application

Hello everybody, I have been tried of transfom this flash application
http://blog.flexexamples.com/2007/08/02/finding-a-pixels-color-value-using-the-bitmap-clas ses-and-getpixel/
to flex mobile application, but I have many errors with the components. Also when I try to load image, on the flash builder the image, we can see the image loaded but when I try run on virtual device, the image can´t views.
I ask help...Thanks

try searching for Java NT service string on google and u will come out with many solutions.....
hope this is the best answer... i can give u.....

Is there a way to save data to just one view in Flex Mobile applications?

I am having trouble handling data between views in a Flex Mobile application that I am writing. I know how to pass data from one view to another, but I was wondering if there is a way to save that data to a view, then get more data from another view (in this case it would be the same view that the original data came from) and put that data on the same view without overwriting the original data. I would be glad to post some code if anyone needs to see it.

I think we realise that this is the same question as the other thread.

Issues with file upload in flex mobile application (sharepoint as backend)

Hello,
I am working on flex mobile application for android platform for which we are having sharepoint as a backend.
(Flex SDK 4.6 and AIR 3.9)
Issue which we are facing is as follows:
We are communicating with the backend server using webservices: example:
<s:WebService id="kWebService" wsdl="http://www.kservice.net/kdatabaseservice.asmx?WSDL" >
 <s:operation name="AddPost"
 resultFormat="object"
 result="addPostResult(event)"
 fault="postsfaulterr(event)" />
</s:WebService>
Above services are working fine but we are facing issue with one service which is related to file upload.
File upload for <10 MB is working fine but when we try to upload larger file on server it fails to process.
We are sending bytearray to the backend and backend code is writing those bytearray into file.
We have tried many ways to overcome from this situation. like we have checked configuration for file upload size on server , we have tried wcf services as well. Please help us on this criticle point as soon as possible
Thanks
Dhwani

Prashant8809 wrote:
Hi
>
> I have already gone through the video by Thomas Jung for multiple file upload but it saves the contents in server and not in >transparent table. So please suggest me alternative solutions.
>
>
> Regards
> Prashant Chauhan
What do you mean that my video saves the contents int he server and not in transparent table? I save the data into a temporary database table so it can be accessed by the parent WDA session. From there the WDA session can do whatever it wants with it. What do you mean by transparent table - that would be a database table. Do you actually mean internal table? if so, just read the data from the temporary database table into memory.

Flex Mobile Application with online database

Hi,
I would like to create a Flex Mobile Application but this one have to be read/connect to a online database ?
I don't found any tuto or infos about that...
Could you please tell me if it's possible and if yes, how to do that
Thanks in advance !

I don't understand one thing...
There are different type to do a connection between Flex and PHP.
Which one is the best ?
1. With AMF (Flex : service-config.xml, RemoteObject) (http://www.adobe.com/devnet/flex/articles/crud_flex_php_zend.html)
2. With Zend Framework (Flex : Callresponder, Time,...) already included in Flash Builder 4.5 (http://devzone.zend.com/1701/flex-and-zend-framework_part-1/)
3. With Zend Server and Flash Builder 4.5 with PHP (http://www.adobe.com/devnet/flash-builder/articles/flashbuilder-php-part1.html)
It's three differents approach but in 2 & 3, it's auto configured with Flex.. however to do a connection between Flex Mobile & PHP (online), I have to use the solution 1
So, if somebody can help me to explain and understand the difference between that.
thanks

What is the best font to use for Thai Language in Flex Mobile Applications ?

Hi
I am facing issues with Thai language in flex mobile applications. I am using Tahoma font and facing issues in TextInput
Whith Tahoma font text Offset setting to far from the starting of the text input .
Can any one suggest me the best font to use with Thai language ?
Many thanks in advance for your help .
Regards,
Kamal

Personally, I prefer uncompressed TIFF or PNG. But many times it won't matter ... you'll be dropping the images into an SD Sequence, so they will lose resolution on output.
-DH

Save data while closing Flex mobile application using HTTPService

On close of the Flex mobile application I need to save some information to the back-end by using HTTPService.
On creationComplete() of the application I am adding :
NativeApplication.nativeApplication.addEventListener(Event.EXITING, onExit);
On close of the mob application, the following method will get call.
private function onExit(e:Event):void
    httpServiceCall("log event data");
The request itself is not reaching backend. I have tested this by installing Wireshark, there is no entry if I close the application in wireshark(wireshark will just catch any kind of requests from frontend to backend).
I am introducing delay to achieve this :
public var closeTimer:Timer;
            private function onExit(e:Event):void
                e.stopImmediatePropagation();
               httpServiceCall("log event data");
                closeTimer = new Timer(3000,1);
                closeTimer.addEventListener(TimerEvent.TIMER_COMPLETE, closeApp);
                closeTimer.start();
            protected function closeApp(event:Event):void{
                NativeApplication.nativeApplication.exit();
The above code is not working. As soon as control comes to onExit() method, application is closing.
According to my understanding, I have to introducesome delay before closing the application to achieve this requirement. How can I introduce delay in this case?

Try opening Task Monitor and killing any existing "adl" process before launching.
Does this help ?

Tutorial for Developing Flex Mobile applications.

Hello all,
Can anyone provide me Tutorials to devleop Flex Mobile applications which access data from SAP Netweaver Gateway via Flash Builder Plugin?
Thanks

This is not a product forum... do you need the flash builder forum?
How to Select a Forum http://forums.adobe.com/docs/DOC-1015

Can't convert Flex Mobile project to desktop project

I'm using the Flash Builder 4.6 trial, and I'm very new to flex development. I've been asked to convert an existing Flex Mobile project (appears to have been developed in Flash Builder 4.5) into an AIR desktop app.
The project imported without complaint. However, the Add/Change Project Type > Convert to Flex Desktop Project menu item is disabled.
I created a blank Flex Mobile project, then a blank Flex web project, then a blank ActionScript project. It's greyed out for those, too. I checked with the projects closed and open; the rest of the items on that submenu are enabled for all projects when closed.
Is this feature disabled in the trial version? Is something else going on?

Clearly the device from verizon works, I would try to contact a computer tech to repair your computer
Really it should be as simple as turn on, connect, go. If it isn't there is a break down somewhere in that computer
What error msg?

Yosemite update causes error 'run out of application memory'

Hi, i use a
Mid 2011, 13 inch MacBook Air with i7, 4gb ram and 66gb left on my storage (out of 256gb). Currently running OS X Yosemite 10.10, updated via Appstore 2 days ago.
Ever since the update, while carrying out usual task such as 'mail' and 'safari' concurrently, i get error message stating 'run out of application memory', the situation is even worse when i have to run excel and word at the same time.
Not sure if the new OS is taking up memory because my tasks are routine and i never had problem prior to the update.
Comments?
Cheers
David

Greetings Everyone,
I use a mid 2011 iMac 27", 3.4 GHz, 16GB 1333 Mhz DDR3 with 457.08 GB free and a 4Tb Thunderbolt drive as my backup and media player total contents 1.2TB.
Since I installed Yosemite and its update 10.10 my iMac takes for ever to boot up and everything has slowed to a snails pace and now I am getting this annoying "You Have Run Out of Application Memory" and you must force quit all of these application. Luckily I now have a back up for what I am working on and don't lose most of my work on projects having to force quit all of the applications that I happen to have open.
I have been using a Mac since it was a small rectangular box with a B&W CRT and I have never encountered a problem like this before with a new OS release.
This reminds me of the days when we used to go to lunch waiting for our mac's to render a project and hope it didn't crash and now its when I boot up a screaming hot machine and do my work on it.
Is there anything I can do or is this a "your stuck with it until an update fixes this or these bugs".
Comments?
Cheers,
Scott

Error when trying to Run MTT Mobile Application in MI2.5 SP 17

Hi Experts,
I got the complete sources and war files of MTT 2.0. i generated the war file from NWDS as "Add jsps as compiled classes" and modified the web.xml file.after that i uploaded it is Sap webconsole as JSP runtime environment and iam using the SAP MI 2.5 sp17 Client. after deploying the applicaton iam getting "HTTP 404 not found error".but when iam trying to run it from NWDS the views and controllers are loading but the jsp (compiled) files are not displaying on the screen nad geeting an error "HTTP 404 not found error".
Is anything iam doing wrong here..?
Your help is highly appreciable.
Thanks in Advance,
Madhu KV.

Hi Veeraraagavan,
Thanks for help.
Now the screens are displaying for MTR.MTS and DBREADER 2.0 .but when i sync first time though the Appliction MTR i am getting an sync error as below
TRACE----
at com.sap.mbs.mttcore.synchronization.communication.OutboundProcessing.prepare(OutboundProcessing.java:54)
at
com.sap.mbs.mtr.sync.process.impl.CustomizationSynchronizer.prepareWAF_TRIP_GET_CUSTOMIZING(CustomizationSynchronizer.java:240)
at com.sap.mbs.mtr.sync.process.impl.CustomizationSynchronizer.syncWAF_TRIP_GET_CUSTOMIZING(CustomizationSynchronizer.java:118)
at com.sap.mbs.mtr.sync.process.impl.CustomizationSynchronizer.eventSyncUserOptions(CustomizationSynchronizer.java:104)
[20090109 08:55:49:015] E [MI/Sync ] Received exception info code 10 and detailed message "Exception while callSync: Internal error: Invalid structure description."
[20090109 08:55:49:015] E [MI/Sync ] Execption info code 10 --> Received undefinied error code.
i dont know where i did wrong. i configured the middleware and R/3 systems with the help of our SAP team but still i dont know where its going wrong.
Even iam not able to understand its front end problem or backend configuration problem.
Thanks,
madhusudhan

Error running Flex mobile application on desktop

Similar Messages

Maybe you are looking for