Error running forms 10g on OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance (but i have to leave the command prompt opened to run well)
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Is it .../forms/registry.dat or .../forms/registry/Registry.dat?
Let's go back to this post. I asked you to try a URL to your form in a browser window, not Forms Builder. The 2nd part of your answer, you said...
But if the OC4J instance is NOT running I have
message says FRM-92120: Registry file
http://walaa:8889/forms/java/oracle/forms/registry.dat
is missing."If your OC4J is not running and you try a URL from a browser, you should be getting a "Cannot find server or DNS Error", not an Oracle error. The only way I could reproduce your error above was to run from Forms Builder with OC4J started and having manually renamed my Registry.dat.
If you didn't edit your Registry.dat (and possible hose it), then someting just went wrong during the install. You could check you installation log. Mine is at C:\Program Files\Oracle\Inventory\logs\installActions2006-03-11_03-50-02PM.log and has a single line containing "Registry.dat" showing the target location.
Is this Forms10g R2 on Windows? You could uninstall ODS and reinstall in probably 30 mins to an hour. Maybe you want to consider that.

Similar Messages

Error running forms 10g with OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Did you save the form before running it, in the context of the builder? there is a known bug in this area.
Patrick.

To run Forms 10g on Windows Mode

Is there possibility to run Forms 10g on Windows mode, not on Web ?
Thanks.

If you want to test your forms locally there is an OC4J component with the Developer Suite which can be started so you can run your Forms on your local station. This is no client/server but you run your webforms local.

Explorer has Hanging while Trying to Run Forms 10g

Hi,
While Trying to Run Forms 10g on Windows vista (o.s) "Explorer has Hanging " ...
Operating system : Windows vista
Forms - 10g
Plz Any one help...
Thanks....
Sa....

Is it the problem with Vista only or in other versions of windows tooo. If the same problem occours in other IE versions then check if you have installed jinitiator.Most probably it is in case the jinitiator not installed...

FRM-92101 error when changing the passwd when running Forms 10g application

Hi Friends,
Issue is with: Getting FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
Steps i followed.
1. Start th OC4J instance of the oracle 10g.
2. Login with one user/passward and opens Forms 10g application
3. By Using One Form, changed the passward of the current user.
4. then closed the Form and then try to close the Forms Application.At this stage i got an error message FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
I verified the log files but i did not get any relevent information
Please help in this scenario.
Regards
Madhava Rayalu

Could you paste the complete error message?
Does this works fine when you change the username /passwd for other users ?
Rajesh Alex

Run form 10g

I use forms 10g R2. When I run a form, it does not show the full size in the browser. Whats the problem? is their any tips?

I used http://localhost:8889/forms/frmservlet?form=myform.fmx&separateframe=true , where I used my form name instead of myform. However, it shows error age 'FRM-40010: can not read form..'.
When I open form builder and run from there, it does not show any form name in the URL. It just shows as follows:
http://localhost:8889/forms/frmservlet
MOreover, it does not show in full screen.
But when I add my form name, it shows the error.

Sysfader: iexplore.exe - Application Error in Forms 10g

Hi,
I am new to Oracle Forms 10g. When I tried to run the Form, it is giving me an Error saying that
*"The Instruction at "0x06130b58" referenced memory at "0x00000054". The memory could not be "read".*
I am unable to run any Form.
Somebody help me out in this regard.
Thansk in advance :)
Regards
Raj
Edited by: 889224 on Nov 30, 2011 8:40 AM

Please always mention 4 digit version numbers (e.g. 10.1.2.0.2) as well as Operation System, Browser and Java Versions.
Just taking a lucky guess here, but if you are using the default config of forms 10.1.2 on a nowadays OS you have a combo of JInit and IE8 which isn't supposed to work and most likely to crash. If this is the case then use a current Sun JPI instead: http://www.oracle.com/technetwork/developer-tools/forms/documentation/forms-jre-131772.pdf
If this is not the case then...well...you might give us a more deeper insight in what you do so we can get an idea what's going wrong.
cheers

Error in Forms 10G isuite

OS windows 2003
Forms 10G isuite
when I am trying to run the form getting this error
java.lang.classNotFoundException:oracle.forms.engine.Main

I have solved the problem.
In Control Panel -> JInitiator administration console , the option "Use browser settings" has to be unchecked.

Error Running Forms: Failure of server APACHE bridge

Hi Everyone,
I have this problem on windows 7 64-bit... installation went fine without any errors.
Forms was working fine, i was able to run test form, and a form that i created, and both were running properly..
suddenly, while testing a new form module, it didn't work, and its showing :
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF. I stopped and started the wls_forms and it didn't solve the problem..
i couldn't get to a solution anywhere, is it a problem with weblogic configuration? but how was it working well at the begining... if weblogic services are not starting, then what's the fix for that?
Help would be appreciated...
Thanks..

No, but as said you installed components (the HTTP Server) you wouldn't need for development. Did you start WLS_FORMS?
In any case the latest version of forms would be 11.1.2 where the installation process for a development machine is much easier.
You'd need
- wls1035_generic.jar and a 64bit java runtime
- the 64bit version of forms 11.1.2: http://download.oracle.com/otn/nt/middleware/11g/111200/ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1.zip
of course you can install the 32bit version of forms too on your 64bit machine.
then during installation just check "development mode", and you get a development installation like you got with iDS 10.1.2 with one weblogic instance instead of 3 and all the components you won't need (like webcache or the http server) won't be installed.
cheers

Unable to run form 10g in IE too

Hi,
Continued from
Frm-10142: The HTTP Listener is not running on
I got the problem in IE too.
Many Thanks & Best Regards,
HuaMin

Hi
. Even if I get the patch from Oracle, next time when I will be with other issues in Win 7 for Form 10g, they will still tell me that Form 10g is not certified with Win 7. Am I right?Not at all...
as previously mentioned ; If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1) it is the same handling issue as Windows 7
Pls check the following table for compatibility issues
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA
Footnote 5 ; Need minimum 10.1.2.3 patch level for IE 8.0 and Firefox3.5. Oracle Application
Pls folloe the steps mentioned it should be here
Regards,
Amatu Allah
Edited by: Amatu Allah on May 22, 2012 2:49 AM

Import java classes Exception Error in Forms 10g

Hi,
I have created a jar file using JDeveloper and need to import it in my Forms 10g to be able to call web services. In my forms builder, after I click on Program - Import Classes and give the name of the stub I created, it gives me the following error :
Exception occurred: java.lang.ClassNotFoundException:
I am following the step by step instructions of OTN
http://www.oracle.com/technology/obe/obe_as_10g/deploy/callws_fromforms/forms_webservice.htm
In the above documentation, where it says "Call the Stub from a Forms Application", point no. 1, it tells to go to control panel - system - advanced - environment variables and edit CLASSPATH. The problem is that in my variable, I cannot see CLASSPATH, it has PATH. I had added my jar file in there. Is it because of this that I'm getting the error.
After that I have added the jar file in default.env in CLASSPATH.
I would appreciate your urgent help in this matter.
Thanks in advance.

Well you can create a new variable called CLASSPATH - however, if you are actually seeing the JAR file in the Java Importer then that would assume you are infact seeing the JAR file.
DO you get this problem if you JAR up a simple "Hello world" - if could be that you are not importing all the classes needed . What Jdeveloper version are you using - if its 10.1.3.1 and JAXRPC web services you may need to add an additional JAR to the class.
Luckily for you ...check out...
http://groundside.com/blog/GrantRonald?title=want_to_know_how_to_call_web_services_fr&more=1&c=1&tb=1&pb=1
Regards
Grant
Message was edited by:
Grant Ronald

Error run form builder visual c++ runtime library

when itry run form give me error
Visual c++ runtime library assertion failed
xperssion result ==utjer_success
frm_10039 : unable to startup the from builder.
why?

when itry run form give me error
Visual c++ runtime library assertion failed
xperssion result ==utjer_success
frm_10039 : unable to startup the from builder.
why? I don't know if this is the same issue, but we receive the same error if trying to "run" a form on a client machine that has an unpatched version of the Forms Runtime, but the Form was created with a Patched version and uses certain functionality such as a Treeview. The solution for us was to Patch the client version, and everything worked fine.
Hope this helps.

ERROR RUNNING FORMS

WHEN I RUN MY FORM, WINDOWS GIVE AN ERROR AND FORMS EXIT IMMEDIATLY WITHOUT SAVING?
THIS IS THE ERROR IN EVENT VIEWER
"Faulting application ifbld90.exe, version 9.0.4.0, faulting module ntdll.dll, version 5.1.2600.1106, fault address 0x000255e9."
ANY IDEA

10x for ur reply,
there is no special error, just it pops out a screen say forms need t shutdown, i can't even save and it happens sometimes with reports
does it ring a bell now???
10x again

Row_number() function error in forms 10g

I used sentence below in forms 10g then an error occured.
row_number() over(partition by GROUP_L1 order by GROUP_L1, GROUP_L2) RN
error : Encountered the symbol "(" when expecting one of the following : , from
above sentence works well in the Toad (<= oracle client tool).
How can you solve this problem?
Edited by: user13763783 on 2011. 3. 8 오후 5:26

Yes Ahmed's Point of View is Correct
you can write a stored procedure on the database and then return the result to Forms. Forms can then call this Stored Procedure.
Alternatively , i believe it's much more easy approach to define a view
view operates just like a table So you can reference this view in any Trigger or any Program Unit.
Hope this helps...
Regards,
Abdetu...

Running forms 10g on PC with Forms 6i

I am currently running Oracle Developer Suite 6i (6.0.8.23.2) 32 bit etc. on Windows XP on my PC.
I now want to load Forms 10g etc. on the same PC. Is this possible? Are there going to be any conflicts with two dirfferent versions on one PC?
Edited by: 781424 on 03-Oct-2011 01:45

Hello,
It is possible. (I have the version 6i, 9.0.2 , 9.0.4 , 10gR2 and 11gR1 on the same PC)
The only point to take care of is the variable PATH.
You can create some BAT files that will set correctly the PATH for each version
Regards

Error running forms 10g on OC4J

Similar Messages

Maybe you are looking for