Error Running patch 4440000

I am upgrading my Ebiz from 11i to 12. I have done it serveral times but I am getting an error in my worker log I have never encountered
Time when worker started job: Sun Sep 14 2008 02:03:28
Start time for file is: Sun Sep 14 2008 02:03:28
sqlplus -s APPS/***** @/data/hrtc/apps/apps_st/appl/jtf/12.0.0/patch/115/sql/jtfpfcreate.sql &un_apps &un_jtf
DECLARE
ERROR at line 1:
ORA-02303: cannot drop or replace a type with type or table dependents
ORA-06512: at line 519
Anyhelp would be appreciated.

I decided to restart the database and reapply patch 4440000. Now I am getting the following error
** Turning off all actions for applprod.txt.
Version check:
Cannot open patch file:
/data/hrtc/apps/apps_st/appl/au/12.0.0/patch/115/driver/admin/applprod.tmp.
File will not be copied to destination.
AutoPatch error:
Version checking failed for applprod.tmp
AutoPatch error:
Failed applying new applprod.txt (if any)
You should check the file
/data/hrtc/apps/apps_st/appl/admin/hrtc1/log/4440000b.log
for errors.

Similar Messages

Error : While applying the Patch 4440000

Error : While applying the Patch 4440000
FAILED: file igwprop.odf on worker 1 for product igw username IGW.
When i check the worker log file i got this error
The sequence IGW_AWARDS_S in the database is defined as:
MINVALUE = 1 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
which should be defined as:
MINVALUE = 10000 MAXVALUE = 2147483647 INCREMENT BY = 1
CYCLE = NO ORDER = NO CACHE = 1000
(Note: The cache value for sequence IGW_AWARDS_S is 20 in the ODF file. The value 1000 is being used instead because this provides better performance when selecting from the sequence.)
Alter the sequence with :
Start time for statement below is: Sun Oct 06 2013 22:16:28
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
The following ORACLE error:
ORA-04007: MINVALUE cannot be made to exceed the current value
occurred while executing the SQL statement:
ALTER SEQUENCE IGW.IGW_AWARDS_S MINVALUE 10000
AD Worker error:
Unable to compare or correct sequences
because of the error above
Time when worker failed: Sun Oct 06 2013 22:16:28
plz help me in solving this.

Check the current value of IGW_AWARDS_S sequence and make sure the MINVALUE in the patch (i.e. 10000) is not greater than the current one.
OERR: ORA 4007 MINVALUE cannot be made to exceed the current value (Doc ID 19824.1)
You may also log a SR.
Thanks,
Hussein

Error while running patch 6728000

Hi Guys ,
I am trying to run patch 6728000 and getting below error
ATTENTION: All workers either have failed or are waiting:
FAILED: file b6892753.sql on worker 1.
FAILED: file b6892753.sql on worker 2.
FAILED: file b6892753.sql on worker 3.
FAILED: file b6892753.sql on worker 4.
FAILED: file b6892753.sql on worker 5.
FAILED: file b6892753.sql on worker 6.
FAILED: file b6892753.sql on worker 7.
FAILED: file b6892753.sql on worker 8.
FAILED: file b6892753.sql on worker 9.
FAILED: file b6892753.sql on worker 10.
FAILED: file b6892753.sql on worker 11.
FAILED: file b6892753.sql on worker 12.
FAILED: file b6892753.sql on worker 13.
FAILED: file b6892753.sql on worker 14.
FAILED: file b6892753.sql on worker 15.
FAILED: file b6892753.sql on worker 16.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
I have checked the worker log-file,
Time when worker started job: Thu Apr 11 2013 15:44:21
Start time for file is: Thu Apr 11 2013 15:44:21
sqlplus -s APPS/***** @/oraapp/apps/apps_st/appl/icx/12.0.0/patch/115/sql/b68927
53.sql &un_icx &batchsize 7 16
DECLARE
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 49
OS: RHEL4
Database : 10.2.0.3
Apps : R12.0.4
Please help me to resolve this error.

You might need to apply Patch 8866249:R12.ICX.A in preinstall mode -- Price Change Via Item Master Is Not Updating The iProcurement Price For Items Before Upgrade To Release 12 [ID 1327431.1]
Please log a SR to confirm the same with Oracle support.
Thanks,
Hussein

Error run time DYNPRO_FIELD_CONVERSION

I have a dump:
Errore run-time        DYNPRO_FIELD_CONVERSION
       Verific. il     28.11.2007 h 02:12:16
A conversion error occurred.
Causa dell'errore
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
The program flow was interrupted and could not be resumed.
Program "SAPMM06B" tried to display fields on screen 0106. However, an
error occurred while this data was being converted.
Indic. per la correzione
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
              Screen name.............. "SAPMM06B"
              Screen number............ 0106
              Screen field............. "EBAN-MENGE"
              Error text............... "FX015: Sign lost."
Further data:
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
It is probably not possible to eliminate the system error
with ABAP alone.
If you have access to SAPnet, you can search for a relevant note
using the following keywords:
"DYNPRO_FIELD_CONVERSION" " "
"SAPMM06B" bzw. "MM06BO0R_RM06B-EPSTP"
"RM06B-EPSTP"
Ambiente sistema
SAP Release.............. "620"
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system......... "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 26
Short dump setting....... "full"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database owner........... "SAPR3"
Character set............ "it_IT.ISO8859-1"
SAP kernel............... "640"
Created on............... "Jul 16 2006 20:40:53"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "139"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "CONSULENTI"
Language key........ "I"
Transaction......... "ME52 "
Program............. "SAPMM06B"
Screen.............. "SAPMM06B 0106"
Screen line......... 26
Informazioni punto di interr.
The termination occurred in the ABAP program "SAPMM06B" in "RM06B-EPSTP".
The main program was "SAPMM06B ".
The termination occurred in line 14 of the source code of the (Include)
program "MM06BO0R_RM06B-EPSTP"
of the source code of program "MM06BO0R_RM06B-EPSTP" (when calling the editor
140).
The program "SAPMM06B" was started as a background job.
Errore verificatosi durante un'elaborazione Batch-Input
Dettaglio cd. sorgente
000010   *eject
000020   *----
000030   * Positionstyp aufbereiten                                             *
000040   *----
000050   MODULE RM06B-EPSTP OUTPUT.
000060
000070   CALL FUNCTION 'ME_ITEM_CATEGORY_OUTPUT'
000080        EXPORTING
000090             PSTYP = EBAN-PSTYP
000100        IMPORTING
000110             EPSTP = RM06B-EPSTP
000120             PTEXT = T163Y-PTEXT.
000130
ENDMODULE.
Contenuto campi sistema
Cmpo SY Contenuto.................... Cmpo SY Contenuto....................
SY-SUBRC 0                             SY-INDEX 0
SY-TABIX 1                             SY-DBCNT 1
SY-FDPOS 1                             SY-LSIND 0
SY-PAGNO 0                             SY-LINNO 1
SY-COLNO 1                             SY-PFKEY VU
SY-UCOMM
SY-TITLE Richiesta d'acquisto mod.: Riepilogo pos.
SY-MSGTY                               SY-MSGID
SY-MSGNO 000                           SY-MSGV1
SY-MSGV2                               SY-MSGV3
SY-MSGV4
Richiami/eventi attivi
N..... Tipo........ Nome..........................
       Programma
       Include                                  Riga
       Classe
     1 MODULE (PBO) RM06B-EPSTP
       SAPMM06B
       MM06BO0R_RM06B-EPSTP                        14
Variabili selezionate
     1 MODULE (PBO) RM06B-EPSTP
       SAPMM06B
       MM06BO0R_RM06B-EPSTP                        14
DIEN                           DIEN
                               4444
                               495E
EBAN-PSTYP                     0
                               3
                               0
LIM                            LIM
                               4442
                               C9D0
RM06B-EPSTP
                               2
                               0
POTE                           TXP
                               5552
                               4800
T163Y-PTEXT                    Standard
                               57666676222222222222
                               341E4124000000000000
Chiamate applicazione
Il dump non riporta informazioni relative
Informazioni applicazione
Il dump non riporta informazioni relative
Note interne
The termination occurred in the function "dynpconv.c" of the SAP
Basis System, specifically in line 701 of the module
"//bas/640_REL/src/krn/dynp/dybas.c#4".
The internal operation just processed is "ENDM".
The internal session was started at 20071128021215.
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system ........ "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database user ID......... "SAPR3"
Rich. attivi nel nucleo SAP
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit      = unlimited
=> Stack limit     = unlimited
=> Core limit      = 1073741312
=> File size limit = unlimited
=> Heap address = 0x11dd952a0
=> Stack address = 0xfffffffffffa920
=> Stack low     = 0xfffffffffffa920
=> Stack high    = 0xffffffffffff910
=> Stack Trace:
     AixStack() at 0x1000206bc
     CTrcStack2() at 0x1000207b4
     rabax_CStackSave__Fv() at 0x1001520d4
     ab_rabax() at 0x10014ef04
     dyHandleError() at 0x1005a6850
     dypcnvoXt() at 0x100cbd6cc
     dynplend() at 0x1010cf268
     dynpmcal() at 0x1010c6f60
     dynppbo0() at 0x1010c5134
     dynprctl() at 0x1010ce40c
     dynpen00() at 0x100bd0c30
     Thdynpen00() at 0x1000a1f7c
     TskhLoop() at 0x1000a5298
     tskhstart() at 0x1000bb0d8
     DpMain() at 0x101579ca0
     nlsui_main() at 0x10154d428
     __start() at 0x1000002fc
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
Lista dei programmi ABAP in oggetto
Tipo
Programma
DataGen   Ora
Dim.car.
Prg
SAPMM06B
25.09.2007 16:07:55
514048
Prg
SAPMSSYD
05.06.2002 17:09:33
16384
Prg
SAPFSYSCALLS
14.02.2002 14:22:47
6144
Typ
T160
12.05.1997 15:22:15
2048
Prg
SAPFMMEX
18.11.2007 09:34:59
177152
Typ
TSTCT
14.02.1998 14:31:34
2048
Typ
TMED
27.08.1994 21:59:16
2048
Typ
TPRG
14.02.1998 14:06:12
2048
Typ
T160D
11.02.2000 14:20:36
5120
Typ
T160V
14.05.1998 22:44:11
6144
Typ
T168T
28.08.1997 09:05:04
2048
Prg
SAPLMEXF
18.11.2007 09:35:00
166912
Typ
T162
02.10.2001 13:56:13
2048
Prg
SAPLSTUP
17.06.2004 12:05:43
65536
Prg
SAPLCNDP
17.06.2004 15:06:47
163840
Prg
SAPFGUICNTL
09.01.2003 17:18:52
20480
Prg
SAPLOLEA
17.06.2004 15:12:42
78848
Prg
SAPLSGUI
09.01.2003 17:15:12
31744
Prg
SAPLSTTM
17.06.2004 15:08:30
75776
Prg
SAPLSBDC
07.01.2003 18:31:25
38912
Prg
SAPLSFES
17.06.2004 15:15:58
174080
Prg
SAPLURFC
17.06.2004 14:25:28
16384
Prg
SAPLSPLUGIN
14.02.2002 14:22:48
6144
Typ
SWCBCONT
15.11.2000 17:55:11
3072
Typ
OLE_VERBS
04.04.1995 16:02:20
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Prg
SAPLSCNT
14.02.2002 14:22:47
24576
Prg
SAPSHDTV
17.06.2004 11:46:16
28672
Typ
EBANW
17.06.2004 15:55:16
21504
Prg
CL_CONTEXTFIELD_MM============CP
25.09.2007 16:07:49
9216
Prg
/1BCDWBEN/SAPLMEN0000
18.11.2007 09:35:16
237568
Prg
SAPLSENA
17.06.2004 14:19:40
28672
Typ
EBAN
13.11.2006 11:19:59
20480
Prg
CL_PROCESS_STATE_MM===========CP
25.09.2007 16:07:50
16384
Prg
SAPLSWUG
17.06.2004 14:22:25
53248
Typ
SWCONT
04.04.1995 16:18:01
2048
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
2048
Prg
CL_GOS_MANAGER================CP
11.04.2001 13:02:00
17408
Prg
CL_GOS_VIEW_MANAGER===========CP
24.01.2002 20:31:22
22528
Typ
SIBFLPOR
15.11.2000 17:53:54
2048
Typ
SGOS_MVOBJ
24.07.2001 09:18:06
3072
Typ
BORIDENT
28.08.1997 08:38:50
2048
Prg
SAPLSUU1
17.06.2004 15:13:06
165888
Typ
USR02
17.06.2004 15:05:37
7168
Typ
USREFUS
07.01.2003 18:24:17
2048
Typ
SIBFLPORB
15.11.2000 17:53:55
2048
Prg
CL_GOS_TOOLBOX_MODEL==========CP
17.06.2004 15:04:37
38912
Typ
SGOS_MODL
24.07.2001 09:18:05
4096
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSWOR
17.06.2004 15:08:55
270336
Typ
SWOTRI
03.01.1996 15:29:13
2048
Typ
SWOTRETURN
20.08.1998 10:59:29
3072
Prg
SAPLSWOH
14.02.2002 14:22:48
7168
Typ
SWOTENV
11.02.2000 14:20:34
4096
Typ
TOJTD
15.11.1995 03:08:46
2048
Prg
SAPLRHS0
14.02.2002 14:22:47
11264
Prg
SAPLSDIFRUNTIME
17.06.2004 14:20:44
82944
Typ
DFIES
09.11.2000 14:07:05
8192
Typ
X031L
15.11.2000 18:03:28
5120
Prg
SAPLSDNT
17.06.2004 12:06:43
199680
Prg
SAPLSUGS
21.11.2002 10:20:02
29696
Typ
TOJTD
15.11.1995 03:08:46
2048
Typ
TOJTB
14.02.1998 14:02:55
8192
Typ
SWOTLI
04.04.1995 17:30:59
2048
Typ
T100
28.08.1997 09:04:45
2048
Prg
CL_EXITHANDLER================CP
17.06.2004 15:04:37
26624
Prg
CL_ABAP_TYPEDESCR=============CP
17.06.2004 14:19:33
21504
Prg
CL_ABAP_ELEMDESCR=============CP
17.06.2004 14:19:13
18432
Prg
CL_ABAP_DATADESCR=============CP
17.06.2004 14:19:13
14336
Prg
CL_ABAP_REFDESCR==============CP
17.06.2004 14:19:33
16384
Prg
CL_ABAP_STRUCTDESCR===========CP
17.06.2004 14:19:33
19456
Prg
CL_ABAP_COMPLEXDESCR==========CP
17.06.2004 14:19:13
13312
Prg
CL_ABAP_TABLEDESCR============CP
17.06.2004 14:19:33
17408
Prg
CL_ABAP_CLASSDESCR============CP
17.06.2004 14:19:33
23552
Prg
CL_ABAP_OBJECTDESCR===========CP
17.06.2004 14:19:33
25600
Prg
CL_ABAP_INTFDESCR=============CP
17.06.2004 14:19:13
19456
Prg
CL_ABAP_SOFT_REFERENCE========CP
29.03.2001 16:42:12
7168
Prg
CL_ABAP_REFERENCE=============CP
14.02.2002 14:22:46
6144
Prg
IF_EX_GOS_SRV_SELECT==========IP
04.12.2000 16:22:18
4096
Prg
%_CABAP
07.01.2003 18:31:23
23552
Typ
SXS_INTER
30.11.1998 15:55:16
2048
Prg
SAPLSEXV
17.06.2004 15:04:40
106496
Prg
CL_BADI_FLT_DATA_TRANS_AND_DB=CP
17.06.2004 15:04:37
33792
Typ
SXS_ATTR
20.08.2001 12:23:27
4096
Typ
V_EXT_ACT
09.11.2000 14:27:05
2048
Typ
SXC_EXIT
09.11.2000 14:23:43
2048
Prg
CL_EX_GOS_SRV_SELECT==========CP
17.06.2004 15:04:37
13312
Prg
%_CSXRT
17.06.2004 15:04:37
11264
Prg
CL_EXIT_MASTER================CP
17.06.2004 15:04:37
13312
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Prg
SAPLBDLS
17.06.2004 11:45:48
176128
Typ
T000
11.09.1997 10:17:18
4096
Typ
SWOTRTIME
14.02.1998 10:19:46
3072
Prg
%_CSWOB
14.02.2002 14:22:46
13312
Typ
SWOTINVOKE
14.02.1998 10:18:40
6144
Typ
SWOTLV
04.12.2000 14:59:45
10240
Prg
SAPLSWCD
17.06.2004 15:06:55
78848
Prg
RBUS2105
13.11.2006 11:20:02
57344
Prg
CL_GOS_PUBLICATION============CP
13.11.2000 16:31:37
15360
Prg
SAPLSGOSHIST
17.06.2004 14:23:50
46080
Typ
EBKN
16.06.2004 13:09:57
9216
Typ
T161
16.06.2004 13:14:35
5120
Typ
T161T
14.02.1998 10:55:58
2048
Typ
CMMDA
18.09.2001 10:02:31
4096
Prg
SAPLMMDA
04.09.2006 11:00:54
65536
Typ
TWLAD
13.08.1997 14:04:45
2048
Typ
TTXID
27.08.1999 17:40:33
3072
Prg
SAPLSTXD
17.06.2004 15:06:22
347136
Typ
STEXTNAME
18.09.2001 10:03:52
1024
Typ
STXDRID
26.02.1999 14:48:42
2048
Typ
STXDRLANG
26.02.1999 14:48:42
2048
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Typ
STXDROBJ
26.02.1999 14:48:42
2048
Typ
THEAD
09.11.2000 14:15:08
6144
Prg
CL_ABAP_CHAR_UTILITIES========CP
07.01.2003 18:31:23
11264
Typ
STXH
17.06.2004 14:15:46
6144
Typ
TCATALOG
25.05.1998 12:19:20
3072
Typ
T168F
27.05.1992 20:16:27
3072
Typ
T168
27.05.1992 17:53:38
3072
Prg
SAPLMECCP
25.09.2007 16:07:53
39936
Prg
CL_BADI_MM====================CP
08.01.2003 16:43:11
9216
Prg
%_CCXTAB
14.02.2002 14:22:46
6144
Prg
SAPLEINH
25.09.2007 16:07:53
56320
Typ
T001W
16.06.2004 13:14:17
9216
Prg
SAPLVDAT
19.02.2002 12:59:51
25600
Typ
T163Y
28.08.1997 09:05:01
2048
Prg
SAPCNVE
14.02.2002 14:22:47
6144
Prg
SAPLOMCV
17.06.2004 10:54:26
16384
Prg
CL_EX_BADI_MATN1==============CP
17.06.2004 10:27:52
22528
Prg
IF_EX_BADI_MATN1==============IP
17.06.2004 10:53:59
4096
Typ
TMCNV
24.02.1999 03:33:25
3072
Typ
RM06B
17.06.1998 03:23:02
10240
Lista tabelle interne
Il dump non riporta informazioni relative
Indice delle tabelle applicative
Programma
Nome................ Contenuto..1.......2........3........4........5....+....
SAPMM06B
SYST                 |00000000000x010000000000000000
EBAN                 |300001100895000010NB B NB           1 Elena Varett20071
*EBAN                |             00000                                   00000
EBKN                 |             0000000 00000000            000000x0C
AEBAN                |3000011008950NB     BBEUR |
EBANW                |300001100895000010NB B NB           1 Elena Varett20071
RM06B                |                           00000000000000000010       00
*RM06B               |                           00000000000000000000       00
RM06E                |          000000000000000    00000000          00000
TPRG                 |300IW2Formato settimana   Sett. |
T001W                |3006   PIATTAFORMA DI LEINI'         6   CEDI6     0000000
T023                 |
T024                 |
T160                 |300ME52                VB        B |
T160V                |300C1XX A              XX X                   X   |
T161                 |300BNB   000100102NBB                 NB         00000
T161T                |300INB BRichiesta d'acquisto|
T168                 |300B AB ***   1 106       0x0C0x0C0x0C0x0C|
T168F                |300B AB XXX                                |
T168T                |300IB0106002 |
TTXID                |EBAN      B04        X
T163K                |                       |
T163Y                |     Standard             |
T001L                |
T160D                |     XXXXXXXXXXXXXXXXXXXXXX
T161E                |                         |
SAPFMMEX
TMED                 |300BB     |
SAPLMEXF
T161                 |300BNB   000100102NBB                 NB         00000
T162                 |300PT0B                ...................................
SAPLSUU1
USR02                |300CONSULENTI ÷x9Fw'x97[æÆ0000000000000000A
USREFUS              |300CONSULENTI
SAPLSWOR
TOJTB                |BUS2105   XI          RBUS2105
SWOTLV               |BUS2105   EXISTENCECHECK                  M
TOJTD                |                                 |
SAPLBDLS
T000                 |300Mandante produzione      Arenzano                 EUR
SAPMM06B
*RM06E               |          000000000000000    00000000          00000
MARA                 |                      00000000            00000000
T006                 |        00          00000000000000x0C 0
SAPLVDAT
TPRG                 |300IW2Formato settimana   Sett. |
SAPLOMCV
TMCNV                |300MATCONV 0x120000000x12
Directory delle tabelle applicative (inf. di gestione)
Programma
Nome.......................... tempo..........lungh....
SAPLOMCV
SYST                           20010612125650 00002404
EBAN                           20061113111959 00000892
*EBAN                          20061113111959 00000892
EBKN                                          00000421
AEBAN                          20000323224119 00000027
EBANW                                         00000896
RM06B                          20000323224119 00000529
*RM06B                         20000323224119 00000529
RM06E                          20020124202505 00001154
TPRG                           20000323231030 00000032
T001W                          20040617141548 00000338
T023                           20040616131428 00000102
T024                           20040616131429 00000352
T160                                          00000035
T160V                                         00000050
T161                           20040616131435 00000095
T161T                                         00000029
T168                                          00000035
T168F                                         00000044
T168T                                         00000013
TTXID                                         00000058
T163K                          20000323230840 00000023
T163Y                                         00000026
T001L                          20000323230832 00000069
T160D                                         00000069
T161E                          20000323230840 00000025
SAPFMMEX
TMED                                          00000010
SAPLMEXF
T161                                          00000095
T162                                          00000234
SAPLSUU1
USR02                                         00000226
USREFUS                                       00000067
SAPLSWOR
TOJTB                                         00000453
SWOTLV                                        00000701
TOJTD                                         00000033
SAPLBDLS
T000                                          00000107
SAPMM06B
*RM06E                         20020124202505 00001154
MARA                           20071118093457 00001118
T006                           20001109142345 00000080
SAPLVDAT
TPRG                                          00000032
SAPLOMCV
TMCNV                                         00000062
Blocchi di contr. CONT ABAP
Include                                 Riga Codice sorg.
Ind. Nome FI Co Par01 Par2. Par3. Par4. Tab.
MM06BO0R_RM06B-EEIND                       25 EXIT.
2502 BRAX 00
MM06BO0R_RM06B-EEIND                       27 ENDSELECT.
2503 BRAX 00
2504 SQLS 08
MM06BO0R_RM06B-EEIND                       31 ENDMODULE.
2505 ENDM 00
2506 -
MM06BO0R_RM06B-EPSTP                        7 CALL FUNCTION 'ME_ITEM_CATEGOR
2507 FUNC 00
2508 FUNC 00
2509 PAR2 02     0336
2511 FUNC 10
2512 PAR2 01     03B9
2514 PAR2 01     03BA
2516 FUNC FF
MM06BO0R_RM06B-EPSTP                       14 ENDMODULE.
>>>>> ENDM 00
2518 -
MM06BO0V_VRTKZ                              6 CASE EBAN-VRTKZ.
2519 BREL 04
MM06BO0V_VRTKZ                              7 WHEN '1'.
2520 when 00 02 0090
2522 BRAN 02
2523 BRAX 00
MM06BO0V_VRTKZ                              8 RM06B-MKNTW = '3 '. "3 Nachkom
2524 MOVL 00 02 0136
MM06BO0V_VRTKZ                              9 WHEN '2'.
2526 BRAX 00
Fine dell'analisi err. run-time
Help me.
Thank you

Hello Maurizio,
Thre screen field EBAN-MENGE is unable to handle a sign along with the value.
Regards,
Ammey Kesarkar

RMAN-10006: error running SQL statement: alter session set remote_dependenc

Backups are failing with following error
RMAN-00554: initialization of internal recovery manager package failed
RMAN-12001: could not open channel default
RMAN-10008: could not create channel context
RMAN-10002: ORACLE error: ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must be from among MANUAL, AUTO
RMAN-10006: error running SQL statement: alter session set remote_dependencies_mode = signature
Not able to change to signature
SQL> alter session set remote_dependencies_mode=signature;
ERROR:
ORA-00096: invalid value SIGNATURE for parameter remote_dependencies_mode, must
be from among MANUAL, AUTO
I dont see MANUAL or AUTO as valid value for this parameter (http://download.oracle.com/docs/cd/B10501_01/server.920/a96536/ch1175.htm#1023124) DB version is 9.2.0
Parameter type
String
Syntax
REMOTE_DEPENDENCIES_MODE = {TIMESTAMP | SIGNATURE}
Default value
TIMESTAMP
Parameter class
Dynamic: ALTER SESSION, ALTER SYSTEM
=======================================
I believe it could be because of following bug
"A PRE-PATCHED ORACLE IMAGE CAN BE INSTALLED IN MEMORY "
Refer: "https://metalink2.oracle.com/metalink/plsql/f?p=130:15:1613505143885559758::::p15_database_id,p15_docid,p15_show_header,p15_show_help,p15_black_frame,p15_font:BUG,4610411,1,1,1,helvetica"
I appreciate your effort in fixing this issue.
Edited by: user10610722 on Nov 25, 2008 4:37 PM

Hi:
It seems when you are starting RMAN it's executing some commands (one 'ALTER SESSION...'. It's seems to be a batch which has a bad value for SORT_AREA_SIZE. Find it and modify to a proper value as message shows. If you can't find start RMAN by calling directly the executable ($ORACLE_HOME/bin/rman or %ORACLE_HOME%/bin/rman.exe).

Autopatch - Error running adutlrcmp.pls in adprdcAdUtilrcmp()

Hi,
We have recently migrated our EBS 10g database from 32 bit RHEL4 server to 64 bit OEL5 server.
All the apps servers are runing on 32 bit RHEL 4 server.
After migrating all apps services are working fine.
Now i am trying to upgrade the database to 11g.
As part of that, applied 11g Release 2 interoperability patch for 11.5.10 (8815204).
The patch log file shoing the below error while compiling invalid objects.
===============================================
Running utl_recomp.recomp_parallel(8), if it exists
OWNER NUM_INVALID
PORTAL30_SSO 1
PUBLIC 26
CTXSYS 5
OLAPSYS 28
GRCMP 1
APPS 408
PORTAL30 30
7 rows selected.
Elapsed: 00:00:00.23
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
STATUS_MESSAGE
Running UTL_RECOMP.RECOMP_PARALLEL...
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
memory exhausted
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
memory exhausted
memory exhausted
AutoPatch error:
Error running adutlrcmp.pls in adprdcAdUtilrcmp()
An error occurred while compiling invalids using the SYS.UTL_RECOMP() package.
Ignoring the failure and continuing...
==========================================================
What is the reason for this? Is it due to 32 bit and 64 bit diff?
How can i solve this issue?
Thanks,

While running adutlrp.sql below error occured
===================================
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
DECLARE
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
====================================================
SQL> select * from UTL_RECOMP_ERRORS
2 ;
OBJ#
ERROR_AT
COMPILE_ERR
158557
25-SEP-11 06.22.23.008812 AM
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_PSTORE_EX
ORA-00980: synonym translation is no longer valid
158558
25-SEP-11 06.22.23.011485 AM
OBJ#
ERROR_AT
COMPILE_ERR
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_API
ORA-00980: synonym translation is no longer valid
158559
25-SEP-11 06.22.23.013549 AM
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_API_PRIVAT
E
OBJ#
ERROR_AT
COMPILE_ERR
ORA-00980: synonym translation is no longer valid
1608837
25-SEP-11 06.23.17.180561 AM
ORA-04045: errors during recompilation/revalidation of GRCMP.HFM_TMP_ORGANIZATIO
N_D
ORA-00980: synonym translation is no longer valid
OBJ#
ERROR_AT
COMPILE_ERR
SQL>
===================================================================
why ORA-03113: end-of-file on communication channel error occured? Please advise.
All PORTAL objects are invalid after migrating to 64 bit.
Thanks,

Error Applying patch 6728000

Hi All,
I have applied the patch 6728000 to my EBS R12 linux and I got the following error:
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
AutoPatch error:
Invalid status when reading existing table
Worker 1 has status 'C'
Telling workers to quit...
All workers have quit.
AutoPatch error:
Error running SQL and EXEC commands in parallel
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash tableHow do I restart applying the patch?
Do I need to rerun "adpatch" again?
Thanks a lot

Thanks again...
I want to apply patch 7653364 and 8222387
But it requires the ff:
1. Required Code levels
This patch requires additional code levels to have been successfully
applied to your system before it can be applied. These code levels,
as at the time that this patch was built, are listed below. Please check
Oracle Metalink to determine if any of these have been superseded
* R12.AD.A.delta.4
* R12.ATG_PF.A.delta.4
==========
How do I know if I have these already in my EBS R12 RUP6 ?
Thanks a lot

Adpatch: Error running SQL and EXEC commands in parallel

Hi
I am applying R12 RUP2 to an instance at the moment. I had an OS crash (I'm running R12 on Linux on VMWARE) and on reboot attempted to restart the patch.
I now get an error as follows:
Error running SQL and EXEC commands in parallel
I must admit, I'm not a DBA, so if anyone has any ideas or has seen this before then it would be most appreciated!
Thanks
Chris

Hi Adith
The patch is 5484000, RUP 2 for E-Business Suite R12
Here's the adpatch output:
Start date: Wed Sep 12 2007 15:15:14
0 "left over" javaupdates.txt files uploaded to DB: Wed Sep 12 2007 15:15:14
0 patches uploaded from the ADPSV format patch history files: Wed Sep 12 2007 15:15:14
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Wed Sep 12 2007 15:15:14
****************** E N D O F U P L O A D ******************
End date: Wed Sep 12 2007 15:15:14
Already asked for the name of the patch directory.
(The answer was: /oracle/patches/5484000)
Already asked for the name of the patch driver file.
(The answer was: /oracle/patches/5484000/u5484000.drv)
Reading release list save file...
Done reading release list save file
Log and Info File sync point:
Wed Sep 12 2007 15:15:15
Turning off actions that reference unrecognized products.
Log and Info File sync point:
Wed Sep 12 2007 15:15:15
End of unrecognized products checking.
(The number of parallel workers is: " 2 ")
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Skipping...
Determine directories to create for Specified driver
since no such action is present for this driver file
Skipping...
Determine Oracle Reports libraries to generate for Specified driver
since no such action is present for this driver file
Skipping...
Determine if need to generate message files for Specified driver
since no such action is present for this driver file
Skipping...
Create Directories for Specified driver
since no such action is present for this driver file
Number of invalid objects: 31057
Running SQL scripts and EXEC commands...
Determining which SQL and EXEC commands to run...
Validating PL/SQL direct execute exceptions file ...
Done validating PL/SQL direct execute exceptions file.
SERVICE_NAME/INSTANCE_NAME : [VIS]
connect_string : [(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ebusr12.chriseebee.me.uk)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))]
Done determining which SQL and EXEC commands to run.
Running SQL and EXEC commands in parallel...
Creating the AD_UTIL_PARAMS table...
Table AD_UTIL_PARAMS already exists, so dropping the table and recreating it.
Creating FND_INSTALL_PROCESSES table...
Already created fnd_install_processes table
Already created FND_INSTALL_PROCESSES_U1 index.
Already created AD_DEFERRED_JOBS table
Already created AD_DEFERRED_JOBS_U1 index.
Writing dependencies of jobs to run to appldep.txt file...
There are now 7569 jobs remaining (current phase=A0):
0 running, 5 ready to run and 7564 waiting.
Reading completed jobs from restart file (if any).
There are now 3474 jobs remaining (current phase=A18):
0 running, 1 ready to run and 3473 waiting.
Determining which java executables are supported by adJavaWorker...
Starting worker processes.
Worker process 1 started.
Worker process 2 started.
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
Running: file adobjcmp.sql on worker 1 for product ad username APPLSYS.
AutoPatch error:
The worker should not have status 'Running' or 'Restarted' at this point.
Telling workers to quit...
************* Start of AD Worker session *************
AD Worker version: 12.0.0
AD Worker started at: Wed Sep 12 2007 15:15:34
APPL_TOP is set to /oracle/VIS/apps/apps_st/appl
************* Start of AD Worker session *************
AD Worker version: 12.0.0
AD Worker started at: Wed Sep 12 2007 15:15:34
APPL_TOP is set to /oracle/VIS/apps/apps_st/appl
All workers have quit.
AutoPatch error:
Error running SQL and EXEC commands in parallel
You should check the file
/oracle/VIS/apps/apps_st/appl/admin/VIS/log/adpatch.log
for errors.

Error running SQL and EXEC commands in parallel when adpatch

Hi,
AutoPatch error:
aiprfp: product 'cle' not in release 'R120'
AutoPatch error:
Error running SQL and EXEC commands in parallel
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash table
You should check the file
/a02/prod/apps/apps_st/appl/admin/PROD/log/adpatch_7305220_1.log
for errors.
How to resolve this errror while applying patch 7305220.
Regards,

Hi,
Please check logfile */a02/prod/apps/apps_st/appl/admin/PROD/log/adpatch_7305220_1.log* for any errors recoded.
Post error messages from this logfile.This is the main patch log file and it should show the same error "aiprfp: product 'cle' not in release 'R120'".
Thanks,
Hussein

Error running SQL and EXEC commands in parallel

Dear Gurus,
We are applying 3480000 and in process as soon as workers start it come out of adpatch session and give su the following error:
************* Start of AD Worker session *************
AD Worker version: 11.5.0
AD Worker started at: Sun Sep 02 2007 23:11:01
APPL_TOP is set to /sgmtemp/prodappl
Worker process 4 started.
Checking if all jobs have their actual and symbolic arguments in sync....
Done.
Writing jobs to run to restart file.
Reading jobs from FND_INSTALL_PROCESSES table ...
Done reading jobs from FND_INSTALL_PROCESSES table ...
Telling workers to read 'todo' restart file.
Done.
Starting phase 0 (A0): first
There are now 98197 jobs remaining (current phase=A0):
0 running, 123 ready to run and 98074 waiting.
Assigned: file adsysapp2.sql on worker 1 for product admin username APPLSYS.
Assigned: file cssruwq1.sql on worker 2 for product cs username CS.
Connecting to CSD......Unable to connect.
AutoPatch error:
The following ORACLE error:
ORA-01017: invalid username/password; logon denied
occurred while executing the SQL statement:
CONNECT CSD/*****
AutoPatch error:
Error while evaluating "Check Object"
Telling workers to quit...
3 workers have quit. Waiting for 1 more.
All workers have quit.
Error running SQL and EXEC commands in parallel
You should check the file
/sgmtemp/prodappl/admin/msbep004/log/3480000_sbm3.log
for errors.
applmgr@21:/sgmtemp/Oglupgr/3480000>
What could be the issue, i tried to connect CSD/CSD in sql and it connected.
Thanks in Advance
Regards
Kiran Rana

Hi Gurus,
Even i tried to recreate the FND_GLOBAL by performing the following, but still no luck:
output for scripts hearder value in FND_TOP:
applmgr@21:/sgmtemp/prodcomn/temp> cd $FND_TOP/patch/115/sql
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> grep Header AFSCGBL*
AFSCGBLB.pls:/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
AFSCGBLS.pls:/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
Output for script header value in Database:
SQL> select text from dba_source where name='FND_GLOBAL' and line <5;
TEXT
package FND_GLOBAL as
/* $Header: AFSCGBLS.pls 115.33 2004/06/30 05:00:18 rsheh ship $ */
package body FND_GLOBAL as
/* $Header: AFSCGBLB.pls 115.78 2005/03/21 11:40:02 vbalakri ship $ */
8 rows selected.
We tried to re-apply 4 hours back when one of the support personnal ask use to run those
scripts. one of them went with out any errors but second one went with errors
as follows:
First Script @AFSCGBLS.pls
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLS.pls
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:24:10 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
DOC> | Copyright (c) 1993 Oracle Corporation Redwood Shores, California, USA|
DOC> | All rights reserved. |
DOC> +=======================================================================+
DOC> | FILENAME
DOC> | AFSCGBLS.pls
DOC> |
DOC> | DESCRIPTION
DOC> | PL/SQL specification for package: FND_GLOBAL
DOC> |
DOC> | NOTES
DOC> | This module is called by AutoInstall (afplss.drv) on install and
DOC> | upgrade. The WHENEVER SQLERROR and EXIT (at bottom) are required.
DOC> |
DOC> | HISTORY
DOC> | June, 1999 - Added function AUDIT_ACTIVE, bug 879630. Jan Smith.
DOC> | 11/19/01 MSkees - Added DBDrv line and 'SET VERIFY OFF' for ARU auto
DOC> | generation bug 2047263 build
DOC> |
DOC> *=======================================================================*/
Package created.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Second Script AFSCGBLB.pls:
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql> sapps @AFSCGBLB.pls <
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 3 03:27:15 2007
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
Warning: Package Body created with compilation errors.
Commit complete.
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning and Oracle Data Mining options
JServer Release 9.2.0.7.0 -
Production
applmgr@21:/sgmtemp/prodappl/fnd/11.5.0/patch/115/sql>
The second script (AFSCGBLB.pls) run's out with errors and changes status of almost 15000 objects as INVALID in database.
Regards
Kiran Rana

Generic error during patching

Hi experts.
Hope you are all having a great weekend. I am patching, so not so great :(
I have noticed that adpatch is throwing the following error during patching:
Start Processing Snapshot Info
AutoPatch error:
Unable to upload "filescopied_2017.txt" to update the current view of the snapshot.
Uploading "d:\oracle\prodappl\admin\PROD\out\filescopied_2071.txt" ...
This occurrs on each patch; it is not fatal and doesnt hold up the process. I just wanted to know if anyone had any idea about it. I understand there is an adadmin job i can run to remedy this?
To access snapshot information launch adadmin, select option 2 - Maintain Applications Files menu, select 5 - Maintain snapshot information . . . is this the way forward?
Thanks.
DA
Oracle Server 2003
11.5.10
Edited by: Dan A on Mar 27, 2010 6:21 AM

Hi Dan,
Hope you are all having a great weekend. I am patching, so not so great :(You are not alone, I am patching too :)
What is the application release? And, what is the patch number?
Uploading "d:\oracle\prodappl\admin\PROD\out\filescopied_2071.txt" ...Can you locate this file?
This occurrs on each patch; it is not fatal and doesnt hold up the process. I just wanted to know if anyone had any idea about it. I understand there is an adadmin job i can run to remedy this?Correct.
To access snapshot information launch adadmin, select option 2 - Maintain Applications Files menu, select 5 - Maintain snapshot information . . . is this the way forward?Yes -- Try this option and make sure it runs successfully and see if the patch runs OK then.
Regards,
Hussein

Error run web application designer 3.X

hello forum,
When I run the tool designer of the web application version 3.x.
jumps the following error:
Run-time error "75"
Path / file access error.
I have installed the patch:
gui710_7-10002995.exe: Patch Level 7 for SAP Logon.
bi710sp05_500-10004472.exe: BI Add-on 7.x, Support Package 5, Patch Level 5.
And he still does not work, you know if I need to install any more patch or perform some sort of setup?
A greeting and thanks.

Hi,
You are talking in the query designer?
But that will only appear the result (with value) red or green or yellow, correct?
The idea is not to show the value, only the light.
Example:
I have the following:
Client|Value|
11    | 10eur
12    | 12eur
13    | -2eur|
The idea is to have the following:
Client|Alert|
11    | Green
12    | Green
13    | Red
Green to positive, red to negative, but only a light, no values displayed.
Thanks!
Edited by: Pedro Taveira on Nov 3, 2011 2:03 PM

Error running 9i reports from forms.

Hi folks,
i am having problems running 9i reports from a form.
i have installed Oracle 9iDS on a Win XP machine with 256 MB RAM and a Pentium 1.4Ghz processor.
i also have a local Oracle 9i database. i have created several reports that i am trying to run from some forms but all efforts to date have failed.
below is some sample code.
declare
v_rid report_object;
v_rjob varchar2(100);
v_rptstatus varchar2(100);
v_jobid varchar2(100);
BEGIN
/*get handle to report object itself*/
v_rid := find_report_object('pbranchlist');
set_report_object_property(v_rid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(v_rid,REPORT_DESFORMAT,'htmlcss');
set_report_object_property(v_rid,REPORT_DESTYPE,'CACHE');
set_report_object_property(v_rid,REPORT_SERVER,'repsrv');
set_report_object_property(v_rid,REPORT_COMM_MODE,synchronous);
v_rjob := run_report_object(v_rid);
v_rptstatus := report_object_status(v_rjob);
while v_rptstatus in ('RUNNING','OPENING_REPORT','ENQUEUED') loop
     v_rptstatus := report_object_status(v_rjob);
     message(v_rptstatus);
end loop;
if v_rptstatus = 'FINISHED' then
     /*display report in browser*/
--      web.show_document('http://steve:8888/reports/rwservlet/getjobid'||
--      substr(v_rptsvrjob,instr(v_rptsvrjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
web.show_document('/reports/rwservlet/getjobid'||substr(v_rjob,instr(v_rjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
else
     message('error running Report');
end if;
end;
pbranchlist is defined in the form,
repsrv is a report server i installed and explicitly started.
on clicking the button to run the above code, i get a message on the browser status bar as follows
opening http://steve:8888/reports/rwservlet/getjobid11?server=repsrv...
that's it. it stays like that forever and a progress bar showing the status of the operation gets to the halfway mark and stays there for up to 15 minutes.
I eventually halted the operation by clicking the stop button of the browser. The form then becomes totally non-responsive with the mouse indicator changing to the hour-glass shape and a small vertical bar moving rapidly back and forth at the bottom of the form window.
My only recourse then is to explicitly close the browser window.
I have already configured Reports to run in non single sign-on mode by setting SINGLESIGNON=NO in the rwservlet.properties file.
Is there anything i have not done properly?
Thanks in advance.

Steve,
can you check the Reports cache directory if the Reports file got created? I would assume yes, but better check.
Frank

Error while patching OIM with BP06

Hi ,
I am facing error while patching OIM 11.1.1.5.0 with BP 06.
Please see the logs below:-
patch:
[input] skipping input as property weblogic_password has already been set.
[echo] unzipping the archives.....
explode-archived-apps:
[delete] Deleting directory /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
[delete] Deleting directory /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
[mkdir] Created dir: /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
[mkdir] Created dir: /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
[unzip] Expanding: /apps/oracle/middleware/Oracle_IDM1/server/patching/oim.ear into /apps/oracle/middleware/Oracle_IDM1/server/apps/oim.ear
[unzip] Expanding: /apps/oracle/middleware/Oracle_IDM1/server/patching/Nexaweb.ear into /apps/oracle/middleware/Oracle_IDM1/server/apps/Nexaweb.ear
[echo] archives unzipped successfully.....
[echo]           seeding the out of the box jobs into db
seed-ootb-jobs:
seed-ootb-jobs:
[echo] ----> SEEDING OUT OF THE BOX SCHEDULE JOBS AND TRIGGERS
[java] Mar 25, 2013 7:32:31 PM org.quartz.core.QuartzScheduler <init>
[java] INFO: Quartz Scheduler v.1.6.0 created.
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport initialize
[java] INFO: Using thread monitor-based data access locking (synchronization).
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileTriggerAndJobs
[java] INFO: Removed 0 Volatile Trigger(s).
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreSupport cleanVolatileTriggerAndJobs
[java] INFO: Removed 0 Volatile Job(s).
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.jdbcjobstore.JobStoreTX initialize
[java] INFO: JobStoreTX initialized.
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.StdSchedulerFactory instantiate
[java] INFO: Quartz scheduler 'OIMQuartzScheduler' initialized from an externally provided properties instance.
[java] Mar 25, 2013 7:32:31 PM org.quartz.impl.StdSchedulerFactory instantiate
[java] INFO: Quartz scheduler version: 1.6.0
[java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler shutdown
[java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED shutting down.
[java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler standby
[java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED paused.
[java] Mar 25, 2013 7:32:36 PM org.quartz.core.QuartzScheduler shutdown
[java] INFO: Scheduler OIMQuartzScheduler_$_NON_CLUSTERED shutdown complete.
[echo] ----> SEEDING COMPLETE LOG FILE
[echo] ----> LOG FILE : ${work.dir}
[echo] jobs seded succefully.....
[echo]           updating the oes out of the box policies in oim db
update-oes-ootb-policies:
update-oes-ootb-policies:
[echo] ----> UPDATING OUT OF THE BOX OES POLICIES
[java] [EL Info]: 2013-03-25 19:32:45.952--ServerSession(139722802)--EclipseLink, version: Eclipse Persistence Services - 1.1.0.r3634
[java] [EL Info]: 2013-03-25 19:32:48.824--ServerSession(139722802)--file:/apps/oracle/middleware/Oracle_IDM1/modules/oracle.oes_11.1.1/jps-internal.jar-JpsDBDataManager login successful
[echo] ----> SEEDING COMPLETE LOG FILE
[echo] ----> LOG FILE : /apps/oracle/middleware/Oracle_IDM1/server/seed_data/Seed/OESPolicies
[echo] oes policies updated successfully..
[echo]           upgrading the oes-ootb policies accordin g to the patched xml
upgrade-oes-ootb-policies:
upgrade-oes-ootb-policies:
[echo] ----> UPDATING OUT OF THE BOX OES POLICIES
[java] java.io.IOException: No such file or directory
[java]      at java.io.UnixFileSystem.createFileExclusively(Native Method)
[java]      at java.io.File.createNewFile(File.java:883)
[java]      at oracle.iam.authzpolicydefn.loader.PolicyLoadDataLogger.createLogFile(PolicyLoadDataLogger.java:68)
[java]      at oracle.iam.authzpolicydefn.loader.PolicyLoader.main(PolicyLoader.java:196)
[java] Exception in thread "Main Thread" java.lang.NullPointerException
[java]      at java.lang.Throwable.printStackTrace(Throwable.java:508)
[java]      at oracle.iam.authzpolicydefn.loader.PolicyLoadDataLogger.createLogFile(PolicyLoadDataLogger.java:73)
[java]      at oracle.iam.authzpolicydefn.loader.PolicyLoader.main(PolicyLoader.java:196)
BUILD FAILED
/apps/oracle/middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:94: The following error occurred while executing this line:
/apps/oracle/middleware/Oracle_IDM1/server/setup/deploy-files/setup.xml:215: The following error occurred while executing this line:
/apps/oracle/middleware/Oracle_IDM1/server/seed_data/seed-rcu-data.xml:136: Java returned: 1
Total time: 2 minutes 25 seconds
I have seen similar error on forum but it has not been answered.
I have set all variables correctly and the directory has all permissions as well.
Please let me know what I am missing here.
Thanks in advance.

Hi,
Thanks for your help.
The directory was already created during patch execution.
My error was related to MDS password.
The password for mds was different from OIM password so the patch errored out.
Once the mds password was updated correctly in the profile file, the patch executed successfully.

Error: Current patch level of database is unknown. Use latest dbpatch build

hi,
I am applying EP6SP2 CM&COLL patch 5 DBPATCH.
current portal version: version=6.0.2.29.0
current C&COLL version: CM_COLL version=60 SP2 Patch 5
Before applying this patch, i applied CM&COLL patch 4 hotfix 8 and the DBPATCH included in tht. Now, after applying CM&COLL patch 5, i tried to apply DBPATCH which comes with CMOLL patch5 SAR file. My database is oracle database. While applying this patch i encountred following error:
<i>
Current database version: SP2.CM.SPs
ERROR: Error: Current patch level of database is unknown. Use the latest dbpatch build
java.lang.Exception: Error: Current patch level of database is unknown. Use the latest dbp
atch build.
        at com.sapportals.wcm.tool.dbpatch.Database.getPatchList(Database.java:48)
        at com.sapportals.wcm.tool.dbpatch.DBPatch.patch(DBPatch.java:66)
        at com.sapportals.wcm.tool.dbpatch.DBPatch.main(DBPatch.java:26)
</i>
Now according to SAP Note 761224, they asked us to use updated DBPATCH attached to this note. But currently there are only 3 files attached of MSSQL. I want the updated ORACLE_DBPATCH files.
rgds,
Nilz

Hi,
i m thru. i raised the question in OSS. They rectified the mistake and attached dbpatch_oracle.zip to SAP note 761224.
rgds,
Nilz

Error Running patch 4440000

Similar Messages

Maybe you are looking for