Error running process chain
Hi,
wehn we run process chain , the result from optimizer log showing error indicator , we check the abap run time using ST22 and discovered the message
DBIF_DSQL2_SQL_ERROR
what the message try to tell us , how to troubleshoot it .?
thanks
Hi AF,
try to look on SAP notes 978417 - Latch Monitor and Table Access Monitor: DBIF_DSQL2_SQL_ERROR. I guess this will solve your problem. It states also here on how you fix the issue.
Let me know if this make sense. Have a nice day!
Regards,
SASJr
Similar Messages
-
CONVT_NO_NUMBER Dump error in Process Chain Abap Program
Hi Experts,
The daily running process chain is failed at ABAP program with the error CONVT_NO_NUMBER.
The reason for the exception is:
The program attempted to interpret the value "40-799" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
I am not familiar with ABAP.
Please suggest me how to proceed..
Thanks
<BMP>Hi,
In ST22
Short text
Unable to interpret "40-799" as a number.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught in
procedure "FM_DIR_LIST" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program attempted to interpret the value "40-799" as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
I am trying post the code but SDN is not accepting more than 15000Char's
So can i get ur (mail) details
So that i can send u the exact code...
Thanks,
BMP -
Hi APO Gurus
I am getting following error in Process Chain :
1 Tab Page ICkw6Rdc7s7x000002e0280 still contains 3 temporary aggregates when deleting
2 Deletion of tab page ICkw6Rdc7s7x000002e0280 with 16566 registrations failed.
3 Error in function module : < OM_TS_DELETE_REGISTER> Return Code : 3
Can anyone guide through this and my process chains for the macros are running very slow.Ihave splitted the jobs for macros but still it is running very slow.How to fasten my process chains.
AmitHi All,
Thank you for your inputs on that....I changed the InfoPackage settings to App. Server and also background scheduling.
Now I get another error in the Load Data process of the process chain. the errors are as follows:
1.Error when opening the data file /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) @35@
Diagnosis: File /usr/sap/interfaces/bw/sv5/GO/Plan/Current Pass/T (origin A) could not be opened.
2. @5C@ Errors in source system @35@
3. @5C@ Error 1 when loading external data @35@
The file name is actually TEST12.txt, but I am not sure whether the process chain is actually picking up the entire path or not.
ALso I checked the batch monitor and found that the job is actually running under the user Z_R3USER and this user has the read and write privelges to application server
Can anyone explain wht the problem could be?
THank you -
Error in Process Chain for Delta pack
Hi All,
Here I am facing error in process chain for delta pack.
Error:
Last delta upload not yet completed. Cancel I
Please send me the solution asap.
ThanksHi,
This message means there may be a load triggered by the same infopackage that may be still running or may be still having yellow status. Go to the monitor screen from this IP itself and it will show the paricular request (it will be the latest one). See if that load is active and running. If its active try to find out if load is happening, if its happening you may let it progress. If its not active you need to force the status to red and delete from the target. Once this is done you can retrigger the load. If its a datamart load you may need to reset the data mart status before the triggering the load.
Refer
Last delta update is not yet completed
Last delta update not yet completed-PC Chain Error
Last Delta Not Yet Completed
This is the same issue as yours.
Thanks,
JituK -
hello gurus,
what are regular errors in process chain during data loads?Hi,
Mostly we have
No SID values
Error in transfer structure
Error in source system
Trfc Error
Time stamp Error
Error occured due to short dum[p
Job cancellation in R/3 system
DSO Activation failed
caller70 is missing
Attribute change run failed
Table space issue
Regards,
Marasa. -
BW: Not getting Dump For Program error in Process Chain
I have one issue regarding Master data loading issue in BW(3.5).
My business flow like we have received data from server A and Server A extract data from Server B and
Server B which is extract data from source(R/3).
Flow like this R/3-->Server B-->Server A(ETL) -
> My Server.
We have a mater data process chain and that chain we have have the source system Server A but in the process chain one process is there which is fethces data like global transport e.g UOM,factory calender etc through Custom program directly from Server B.
Oneday what happened On that process the process chain Yellow since more than 16 hrs.Once nextday process chain trigger the process chain runs sucessfuly.
But lastdays process chain paticular process stills remains yellow?
We are not getting any dumps and even if from Server A there is no logs then anyone could please tell me what is reason and how to solve it.
Note: it will be helpful for me if any one know how to check dump for program errors in Process chain as narated issue.Guys, I am also facing the same issue.
When DTP is completed successfully, it has the job log blow :
Job started
Step 001 started (program RSPROCESS, variant &0000000391261, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIDTPR_335754_1 with ID 06532200
Job finished
When it fails or remain yelllow for long time and then turn into red.
Job started
Step 001 started (program RSPROCESS, variant &0000000391306, user ID BWREMOTE)
Performing check and potential update for status control table
Status 'Executable' (user BWREMOTE)
Status 'Active' (user BWREMOTE)
EXTRACTION OF DATAPACKAGE 000001
EXTRACTION OF DATAPACKAGE 000002
Job finished
The question is, why the program RSBATCH_EXECUTE_PROZESS is not scheduled. Is it because there is no free resource? Or poor response from SAP ECC?
Finally what does "EXTRACTION OF DATAPACKAGE 000001" mean? Its not scheduled?
Regards
MultiABAP
Edited by: MultiABAP on Oct 6, 2010 10:32 AM -
Data load Error using Process chain
Hi,
In NW2004s when I schedule delta loads for 2LIS_11_VAITM using process chains, when there is zero delta, the manage screens of the infocubes show green light with zero records correctly whereas the process chain log display shows red. The details of the process monitor show zero records. Is this right? I assume that even if there is zero delta, the log must show green and all the subsequent processes like activation of ODS, deleting of PSA, construction of indexes must be carried out. Please confirm. Is this a bug?
Thanks.
ParamHi Victor,
Can you please advice how you solved issue as we are having similar issue where it works fine when loaded manually but throws communication error when process chain runs, following is error message..
Communication error: call FM RSSDK_DATA_REMOTE_GET
Thanks in advance for your help!!
Sandeep -
I am getting an error in process chain in bw 3.5?
Hi all,
I am getting an error in process chain in bw 3.5?
@5D@ A type "Activate ODS Object Data" process cannot precede process "Execute InfoPackage" var. ZPAK_4GT51KCFLGM9VPY80NI7UPCFJ in th @35@
I was just executing an initial ods -> activate ods as well as -> further update ods is getting generated and then 2nd ods-> activate ods -> further update ods too.
Why does further update ods gets selected automatically?
Thanks
poojaHi Pooja
Are you talking about update ods object data?
Please check this http://help.sap.com/saphelp_nw70/helpdata/en/12/43074208ae2a38e10000000a1550b0/content.htm
Edited by: Chandamita Sarmah on Feb 11, 2010 4:43 PM
Edited by: Chandamita Sarmah on Feb 11, 2010 4:46 PM -
Error in Process chain( Urgent Please )
error in Process chains:
My Process Chain errors out in the step to activate the ODS after loading data inot it.
The loading is correct and green. The Activation step errors out .
Can u please explaing me the error messgae what it means & how to overcome the error & correct it ?
I get message like this :
Req. REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status 2 in rsodsactreq missing in return
Message no. RSMPC129
Diagnosis
Request REQU_0WBTMPS7KTKP9BWTZ173XWX3Y, data package 000001 with status &3 in table 'RSODSACTREQ' is passed to the return structure as correct.
System response
The return structure is corrected and the data package is marked as incorrect.
Message was edited by:
Chris GokulChris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun -
How to stop the running process chain
How to stop the running process chains or infopackges...just qm status change is enought?
BI - SM 37 - Kill the Job
ECC - SM 50 - Kill the job -
Is it possible to run process chain from the certain process/point?
Hello
Is it possible to run process chain from the certain process?
How?
ThanksHello,
yes it possible! use the following steps.
1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
3. t codese37>> run FM RSPROCESSFINISH.
4. give the deatils u have got in RSPROCESSLOG table here and say execute.
This will solve ur problem.
Hope this helps!
Reg
Deepmala -
Run process chain on last three days of the month
Hello
I need to run process chain on last three days of the month. For example , It should run on 28, 29 and 30th dates of June.
There is no option to put a code in the start process of the process chain.
I can run it every day and put a code in the infopackage/DTP so that empty load (0 records) will be done on other days.
This doesnt sound as a good option.
Do u know any other options?Hi
See the code and details how to do it, and change the code as per your requirement.
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Triggering the Process Chains at Particular Date using Events
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/s-u/triggering%20%20the%20process%20chains%20at%20particular%20date%20using%20events.pdf
BI-ABAP (Trigger Process Chains on evry month 3rd and 4th day).
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=81428842
Thanks
Reddy -
How to run process chain in day of 20 and 2 every month?
Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P -
Error in process chain pushing step
Hi Experts,
We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see the variant in PC.
Could any one please give us your inputs on the error, if you experienced such type of error message. Your inputs/suggestions are highly appreciable.
Best Regards
Venkat...Hi Ram, thank you for the quick response.
Yes, at source, all requests are available for reporting.
Source is a Cube and target is OHD (DB Table). From this OHD we are pushing data to PI system.
PC flow is: Start--->DTP--->Push Interface. The push interface step got failed.
Daily, it's working fine. Unfortunately, today failed
Any insights please...
BR
Venkat... -
Error in process chain creation : SET SCREEN not allowed in subscreens
Hello,
We are getting an Error in process chain creation : SET SCREEN not allowed in subscreens SAPRSSM 0100.
Please give a solution. Thanks in advance.
RR.Just do detail view on in the process chain. It will take you to the error. See the message and then display message. You can know why the message is appearing.
Maybe you are looking for
-
9.2.0.6 or 9.2.0.7 client
does anyone know where I can download the patchsets for either of these products. I tried metalink and technet and I cannot find either ..
-
I finally completed a brochure in Acrobat X with lots of embedded video. I tested it on every PC I could get my hands on and all worked fine. I visited my first client site today and the videos wouldn't play. It turns out that they have Acrobat 8 pro
-
Get colors used in a PDF file via Plug-in
Hi. I have a PDF file with some texts color red, some texts color blue, and some texts color ... I want to get how many colors used in the PDF file. I only think of getting color list with checking every character in the file. It will take long time.
-
Hi all , I need to display the new columnin my page ,so i am moving to extend the VO ,whicjh is not entity based ,,,,, I followed all the steps in jdeveloper,, after adding extended vo in the first step,,,, i am getting the parent vo query in the Sec
-
HT1539 Why do I only get the SD copy of a digital download when I bought the blu-ray HD film?
Just bought the 3D Blu-ray version of Prometheus and was pleased to see it came with a digital copy, however on redemption in the iTunes store it only downloads the SD version. Is this standard practice? Why don't they give you the HD version of the