Error running program AI_CRM_CPY_PROCTYPE in SOLMAN 7.1

Hi Gurus.
I'm trying to run program AI_CRM_CPY_PROCTYPE to copy transaction type SMIN to ZMIN in SOLMAN 7.1 SP3.
When I choose button "start copy process", the program terminates with error "ASSIGN_BASE_TOO_SHORT".
Do I need to change something in the screen before I choose the "start copy process"? Can you please help me how to correctly run this report to copy transaction type.
The Central Correction Note for was already applied in our SOLMAN system.
Thanks,
Tess

Hi,
In SOLMAN 7.1, Use SOLMAN_SETUP, and go to IT Service Management-> Change Request Management.
Apply the master note for Charm in step and in Step 3, Copy Transaction Type via Report.
Please use the above method, it should work.
Regards,
Sunny

Similar Messages

Error running programs on Windows 2008 R2

Hi All,
I have receive an error when I run a program on my 2008 R2 server, it claims the faulting module to be MSVCR80.DLL
so I am wondering if there is a corruption.
Can any one tell me the correct procedure for repairing/replacing this file?
Thanks
Thanks Andy

I have receive an error when I run a program on my 2008 R2 server, it claims the faulting module to be MSVCR80.DLL
It appears that, .Net framework installed on the server is crashing.
I would suggest you to remove .Net framework using .NET Framework cleanup tool and reinstall that again.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS.

Abap Dump Syntax error in program "/SSF/SLIB " occuring in SOLMAN 7.1???

Hello Friends,
   After upgradation Solman 7.01 to 7.1, During EWA Alert management configuration in step 3 --> Check Software component level phase, we receiving below error.
   Also Syntax error in program "/SSF/SLIB " Dump is occurring inST22. Please find the Abap dump details attachment.
Please help me to resolve this issue.
Regards,
Farkath C

/SSF/SLIB comes from SP A/PI, if there were issues in old version then they should have been reported.
Upgrading may be a solution.
However, there references of ADD_CCDB_ABAP_EXTRACTOR
Execute RFC                                                                            |
|>>>>>| CASE LS_OPT-RFC_CALLTYPE.                                                                 |
| 1640|    WHEN 'SYNC'.                                                                            |
| 1641|      CALL FUNCTION '/SSF/CALL_SUBROUTINE_RFC'                                              |
| 1642|                                   DESTINATION LS_OPT-DESTINATION
That's why I am asking for the latest dump after the run of RTCCTOOL.
Regards

Syntax error in program SAPLRRK0 - while running query in Bex/Portal

Hi all,
we just transported all the objects from dev to QA and data is loaded and everything went good. We are SPS9 and front end patch 903
Now I am trying to run queries on Bex analyzer and portal and I am getting this error.
"Syntax error in program SAPLRRK0."
Also on portal I am getting these extra messages
Error while executing function module: BICS_PROV_SUBMIT_VARIABLES
Error while executing function module: BICS_PROV_OPEN
I am researching but any input is appreciated.
Thanks,
Kiran

Thanks Prakash,
I understand the pre-requisite notes issue but when we are moving like 50 notes from BW Dev to BW QA i am not sure how it works. I overheard the basis guy saying he is going to appy notes as per time stamp they were applied in BW Dev system. I will check on that though.
I have applied notes 969330, 969772, 977912,978359, 981814, 987135 in last 2 weeks. (which probaly are some how related to the issue). We have also applied some BI-Java notes in Portal Dev which are not transported to Portal QA.
Thanks,
Kiran

Error while running Program YL_ADJUST_COMMITMENT

Error while running Program YL_ADJUST_COMMITMENT, i think it actually comes from FN8C business operation for single posting w
"Message" - No account refernce could be found - Error in update to Accounting - Distribution error -CoCd 601.
Please help

Resolved my self

I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime librar

I am running windows xp. Trying to download latest version of iTunes and get error message: Microsoft Visual C Rundtime Library. Runtime Error. Program:C\ProgramFiles\iTunes\iTunes.exe. R6034 An appliction has made an attempt to load the C runtime library incorrectly. Please contact the appliction's support team for more information.
2nd/ message: iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 1114)
I have removed iTunes serveral time and tried to reinstall many times and get the same results noted above.
Can anyone help me? Thank you. EFS1

Hello DrJMDDC,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
1. Remove iTunes and related components from the Control Panel
2. Verify iTunes and related components are completely uninstalled
3. Reinstall iTunes and related components
Best of luck,
Mario

Error when trying to run "Program - Publish FSG Report"

We're using 11i (11.5.10.2) version
I am trying to run 'Program - Publish FSG Report' but receiving the following error message in the View log file on "Financial Statement Generator (XML Report Publisher)".
XML Report Publisher 5.0
Updating request description
Waiting for XML request
Retrieving XML request information
Preparing parameters
Process template
--XDOException
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
     at java.lang.reflect.Method.invoke(Method.java:611)
     at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:473)
     at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:188)
     at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:156)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:916)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:869)
     at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:204)
     at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1497)
     at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:913)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:1766)
     at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:1277)
     at oracle.apps.xdo.oa.cp.JCP4XMLPublisher.runProgram(JCP4XMLPublisher.java:807)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:148)
Caused by: oracle.xdo.parser.v2.XMLParseException: End tag does not match start tag 'fsg:RptLine'.
     at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:324)
     at oracle.xdo.parser.v2.XMLReader.popXMLReader(XMLReader.java:526)
     at oracle.xdo.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1287)
     at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:314)
     at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:281)
     at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:266)
     ... 16 more
Ref Publish FSG: Error: XML: XDOException, End Tag Does Not Match Start Tag [ID 339009.1]
I tried to apply the patch#12700905, then retest the issue, but I receiving the following error message in the output file on "Program - Publish FSG Report"
DECLARE
ERROR at line 1:
ORA-06550: line 133, column 8:
PLS-00306: wrong number or types of arguments in call to 'SUBMIT_XML_REQUEST'
ORA-06550: line 133, column 5:
PL/SQL: Statement ignored
Has anybody can help me?
Thanks
Sam

Hi Sam.
You will need to apply Patch 5728162 . To see the complete solution see MOS Doc ID 787396.1
Hope this helps.
Octavio

While run "Program - Run Financial Statement Generator" occurs errors? why

while running "Program - Run Financial Statement Generator" occurs errors?
Program - Publish FSG Report
output:
The concurrent request ID of your FSG request is 309112.
The concurrent request ID of your XML Report Publisher request is 309113.
hawk_BS_IFRS PC by month (PL) (Financial Statement Generator)
can output good format xml
but
Program - Run Financial Statement Generator
the phase: Completed and
the status: Error
anybody can give me some sugguestion?

hello, I have known why.
because my xml publisher's version is 5.6.1. it's not afford it .
you can refer to metalink.
and it's not problem in 5.6

HT1926 Have you gotten the error "a program required for this install could not be run"

Whenever I try to install iTunes on my Windows 7 PC, I get the error" a program required for this install could not be run". Any ideas?

Burwood, that tip says to repair the Apple Software Update module. I went through the process of uninstalling all Apple programs from my computer first, so that's not the problem (and it's not installed, so it can't be repaired).
I tried installing iTunes with the "automatically update" box unchecked as well, to no avail. Any ideas?

Run time error for program: RPCALCU0_CE

Hi Abapers,
When we execute the standard program: RPCALCU0_CE from SE38. Below run time error is getting trigerred before selection screen is displayed. Below are the run time error details -
Runtime Error          UNCAUGHT_EXCEPTION
Exception              CX_HRPA_INVALID_PARAMETER
       Occurred on     08/04/2010 at   01:22:17
What happened?
The exception 'CX_HRPA_INVALID_PARAMETER' was raised but was not caught at any
stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_HRPA_RESOLVE_EXCEPTION=====CP', had to
be terminated.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_HRPA_INVALID_PARAMETER',
was neither
caught nor passed along using a RAISING clause, in the procedure
"RESOLVE_EXCEPTION" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Invalid parameter EXCEPTION, value
The occurrence of the exception is closely linked to the occurrence of a
previous exception, "CX_HRPA_VIOLATED_PRECONDITION", which occurred in the
program "CL_HRPA_MASTERDATA_FACTORY====CP" -
specifically in line 6 of the (Include) program
"CL_HRPA_MASTERDATA_FACTORY====CM004".
The reason for the exception was:
Precondition violated
Please suggest the solution to overcome this.

Hey,
    I could not figure your exact problem. But you can go to the transaction ST22 to take a better look at the error that you got. This gives a detailed explanation of the exact error that you are getting. The moment you enter this transaction, you will see the number of runtime errors you got today. Just click on 'Today'. This will give you the list of runtime errors. Click on the relevent error and you can get a much more detailed explanation of the same.
Hope this helps.

When I tried to open a fresh iTunes download my computer gave the error message : 'program cannot run in DOS mode'. Since both items are Apple, why might this be happening?

When I tried to open a fresh iTunes download my computer gave the error message : 'program cannot run in DOS mode'. Since both items are Apple, why might this be happening?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99602)

OWB - Workflow- Cannot run program "/usr/bin/perl": CreateProcess error=2,

Hi All,
I am using OWB 11gR2 and I am getting "perl" location error after start workflow for any dimension or fact.
*Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
The log is below. I am using Windows 2008 R2 OS and 11gR2 DB. The perl path is set in the environment variables and I can run the perl.exe from command line.
Why OWB is looking for the Unix base path "/usr/bin/perl": is a question for me.
If anybody knows the issue please guide me.
Thanks
OUBIWF_D_DEVICE_ACTIVITY_TYPE                                        2012-07-04 16:57:37.0     4
Parameters
OUBIWF_D_DEVICE_ACTIVITY_TYPE:FILEMGR_PRE                              1          2012-07-04 16:57:38.0     2
Parameters
RPE-02229: The following debug information was collected:
RPE-02230: Debug Information: os.name = Windows Server 2008 R2
RPE-02230: Debug Information: os.version = 6.1
RPE-02230: Debug Information: os.arch = amd64
RPE-02230: Debug Information: user.name = INT-A-MDM-01$
RPE-02230: Debug Information: user.dir = C:\product\11.2.0\dbhome_3\owb\bin\win32
RPE-02230: Debug Information: argv.arg0 = /usr/bin/perl
RPE-02230: Debug Information: argv.arg1 = /spl/intbase/DB/tools/filemgr/splfilemgr.plx
RPE-02230: Debug Information: argv.arg2 = -l
RPE-02230: Debug Information: argv.arg3 = /spl/BIDevelopment/bi2400db
RPE-02230: Debug Information: argv.arg4 = -n
RPE-02230: Debug Information: argv.arg5 = D_DEVICE_ACTIVITY_TYPE_EXT.DAT
RPE-02230: Debug Information: argv.arg6 = -p
RPE-02230: Debug Information: argv.arg7 = 1
RPE-02230: Debug Information: argv.arg8 = -s
RPE-02230: Debug Information: argv.arg9 = S
RPE-02230: Debug Information: argv.stdin =
RPE-02230: Debug Information: USERPROFILE = C:\Windows\system32\config\systemprofile
RPE-02230: Debug Information: JAVAPATH = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: NODEID = 1
RPE-02230: Debug Information: IAS_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: SystemDrive = C:
RPE-02230: Debug Information: RTHOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: Path = C:\product\11.2.0\dbhome_3\bin;C:\product\11.2.0\dbhome_3\jdk6\jre\bin\client;C:\product\11.2.0\dbhome_3\jdk6\jre\bin;C:\product\11.2.0\dbhome_3\owb\bin\admin;C:\Windows\system32
RPE-02230: Debug Information: CONNECT_SPEC = 10.34.32.136:1521:MDM
RPE-02230: Debug Information: PROCESSOR_REVISION = 1a05
RPE-02230: Debug Information: OCM_ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERDOMAIN = WORKGROUP
RPE-02230: Debug Information: ALLUSERSPROFILE = C:\ProgramData
RPE-02230: Debug Information: TMP = C:\Windows\TEMP
RPE-02230: Debug Information: CommonProgramFiles = C:\Program Files\Common Files
RPE-02230: Debug Information: PROMPT = $P$G
RPE-02230: Debug Information: PROCESSOR_LEVEL = 6
RPE-02230: Debug Information: JVM_OPTIONS = -Xmx768M
RPE-02230: Debug Information: LOCALAPPDATA = C:\Windows\system32\config\systemprofile\AppData\Local
RPE-02230: Debug Information: COMPUTERNAME = INT-A-MDM-01
RPE-02230: Debug Information: SystemRoot = C:\Windows
RPE-02230: Debug Information: ORA_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: USERNAME = INT-A-MDM-01$
RPE-02230: Debug Information: APPDATA = C:\Windows\system32\config\systemprofile\AppData\Roaming
RPE-02230: Debug Information: ProgramData = C:\ProgramData
RPE-02230: Debug Information: PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
RPE-02230: Debug Information: ORACLE_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: RTUSER = OWBSYS
RPE-02230: Debug Information: ProgramFiles(x86) = C:\Program Files (x86)
RPE-02230: Debug Information: TEMP = C:\Windows\TEMP
RPE-02230: Debug Information: OEM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramFiles = C:\Program Files
RPE-02230: Debug Information: JDK_HOME = C:\product\11.2.0\dbhome_3\jdk6
RPE-02230: Debug Information: OCM_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: ProgramW6432 = C:\Program Files
RPE-02230: Debug Information: PROCESSOR_IDENTIFIER = Intel64 Family 6 Model 26 Stepping 5, GenuineIntel
RPE-02230: Debug Information: STARTUP_TYPE = -manual
RPE-02230: Debug Information: PROCESSOR_ARCHITECTURE = AMD64
RPE-02230: Debug Information: OS = Windows_NT
RPE-02230: Debug Information: FP_NO_HOST_CHECK = NO
RPE-02230: Debug Information: CommonProgramW6432 = C:\Program Files\Common Files
RPE-02230: Debug Information: ORACLE_SID = mdm
RPE-02230: Debug Information: DISCOVERER_ALLOW_DB_CONNECT_STRING = YES
RPE-02230: Debug Information: OWB_HOME = C:\product\11.2.0\dbhome_3
RPE-02230: Debug Information: NUMBER_OF_PROCESSORS = 2
RPE-02230: Debug Information: PUBLIC = C:\Users\Public
RPE-02230: Debug Information: PSModulePath = C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
RPE-02230: Debug Information: CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
RPE-02230: Debug Information: ComSpec = C:\Windows\system32\cmd.exe
RPE-02235: The operating system has reported that it cannot execute the requested command. This may be because the command or the parameters are invalid, or that the command is shell command. Any result code return is specific to the operating system. Debug information has been produced.
Cannot run program "/usr/bin/perl": CreateProcess error=2, The system cannot find the file specified
OUBIWF_D_DEVICE_ACTIVITY_TYPE:EMAIL_FILEMGR                              1          2012-07-04 16:57:40.0Parameters
ORA-24247: network access denied by access control list (ACL)
ORA-06512: at "SYS.UTL_TCP", line 17
ORA-06512: at "SYS.UTL_TCP", line 267
ORA-06512: at "SYS.UTL_SMTP", line 161
ORA-06512: at "SYS.UTL_SMTP", line 197
ORA-06512: at line 8

Hi There
Am experiencing the same issue. Did you manage to resolve it, is so can you advice what the resolution is. Thanks
Regards,
Kayode

Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

I am having a problem installing Nikon Codec, software to view photos and get this error error message: Setup has experienced an error. Please do the following: -Close any running programs -Empty your temporary folder -Check your internet connection (Internet-based Setups) Then try to run setup again. Error code -6003. How do I empty temporary folder?. Thanks. Allan

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache

Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe

Hi
I have created a sample Fusion Web Application(ADF) and created a test.jsp in viewcontroller with few components. I have started the integrated weblogic server and started successfully, but when I run test.jsp it is giving me the below error
Error: Cannot run program "C:\Oracle\Middleware\jdk160_21\jre\bin\javaw.exe" (in directory "C:\Documents and Settings\chowdamr\Application Data\JDeveloper\system11.1.1.4.37.59.23\o.jdeveloper\DefaultWorkspace"): CreateProcess error=267, The directory name is invalid.
Initially this page is working successfuly.
Please tell me whats the problem.
Edited by: 858782 on May 13, 2011 5:28 AM

There are some problems when JDev's system directory (e.g. the \system11.1.1.4.37.59.23 directory) is in a path that contains spaces (as it is in your case - C:\Documents and Settings\...). Move the system directory to a path without spaces and try again. The simplest way to move it is to start JDeveloper in a "single user" mode (use <tt>jdeveloper.exe -singleuser</tt>) which will create the system directory within JDev's home directory. Of course, if your JDeveloper is installed in a path containing spaces, it will not work either (for example, if JDev is in C:\Program Files\...).
Have a look here for a more sophisticated approach for moving the system directory to another location:
http://technology.amis.nl/blog/8387/change-the-jdeveloper-system-directory
Dimitar

I keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?

The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]].

Error running program AI_CRM_CPY_PROCTYPE in SOLMAN 7.1

Similar Messages

Maybe you are looking for