Error running query - 'Error reading the data of InfoProvider 0TCT_VC01'
Hi,
I have worked through all the steps to activate BI statistics in our system (Netweaver 2004s SAP_BW 700 BI_CONT 702) yet some of the queries are not working.
Specifically when I run the query 0TCT_MC01/0TCT_MC01_Q0131 I get an error that reads:
Error reading the data of InfoProvider 0TCT_VC01
There is still no data source assigned to VirtualProvider 0TCT_VC01
Any help on how to resolve this would be appreciated.
Thanks.
Dyllan
Did you install the underlying basic cube for the virtual cube(FM) to read the data from? That shoudl be 0TCT_C01- I guess
Similar Messages
-
Error when reading the data of infoprovider
Hello,
I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows:
Error reading the data of InfoProvider ZDPPTGR1
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Has anybody experience with solving this problem? It sounds like a bigger problem - can somebody confirm this? Or is it a problem which is easy to solve?
Thanks for answering!
Kind regards
HeinzHi,
Please follow the below threads. They are similar to the error you are facing and they may help you with the issue ::
Remote cube - uncaught exception
DBMAN350 Error reading MultiCube data over aggregate
Error reading the data of InfoProvider 0TCT_VC01
Regards,
Arpit -
BEX query error---Error reading the data of InfoProvider
Hello all,
we are getting the following msg when we execute the query-
Error reading the data of InfoProvider ZEUDPR01
Errors occurred when extracting data from DataSource 9AEU_DOM
Short Text: Error for COM routine using application program (return c
Parameter: 1028533- LC kernel
Message in Source System: E102(/SAPAPO/OM) ...
Short Text: COM - error Unknown
Parameter: Unknown
Message in Source System: E001(/SAPAPO/OM) ...
Messages for DataSource 9AEU_DOM from source system PA1CLNT100
Errors occurred during parallel processing of query 4, RC: 3
Error while reading data; navigation is possible
Row: 54 Inc: WRITE_MESSAGES Prog: CL_RSDR_AT_QUERY
Found
This is the error observed for a particular selection only..for rest of the selection we get the data correctly.
Please help with the possible causes of error.
Thanks,
PallaviHi Pallavi,
How did you manage the pb?
we have the same error after Stack 21 (SP23)
we could not run query.
Thanks.
John -
Error reading the data of InfoProvider /APC/FINGLV01
Hi All,
Via RSA1 I wanted to check the data but met the following error
/APC/FIAGLACC_TD01_FQ9CLNT001: The application running deliberately caused an abo
Error in substep Error reading the data of InfoProvider /APC/FINGLV01
Also, in all oview view, it displayed "No data available" error.
Error msg : Error reading the data of InfoProvider /APC/FINGLV01
Message no. DBMAN305
Diagnosis
Errors occurred while reading a VirtualProvider outside the BI system. Check whether the previous error messages contain any information about the possible cause of this error.
It is possible that the error message cannot be displayed because the error message class does not exist in the BI system. If this is the case, only the name of the error class and the message number are displayed. View the error message text in the specified error class in the source system of the VirtualProvider.
Procedure
Since the error is not necessarily in the BI system, there is no specific procedure for resolving it. With VirtualProviders, problems often occur with the connection to the remote system; these can lead to system termination. If the code for the VirtualProvider is not from SAP, contact the relevant contact person to help resolve the issue.
If an SQL error is listed in the previous message, see the procedure for SQL errors.
Thanks in advance
regards,
Anil
Edited by: Anil Kumar Koppuravuri on Oct 16, 2009 3:53 AMAt this point of time, we are unable to implement any patches, we would like to know exact reason behind the error, so that we can correct it with out implementing a patch.
And also the problem is not Consistent, Some time it works fine (50% Time it works fine)
I really appreciate your time
Message was edited by: TR Palle -
Error reading the data of InfoProvider
Hi experts,
The execution of a query raises an exception.
If we execute it through TC RSRT we get next messagge:
"EError while reading data; navigation is possible
EError reading the data of InfoProvider ZBCS_V10
EUnable to determine consolidation area for data basis GP
I>> Row: 11 Inc: RAISE_READ_ERROR Prog: CL_RSDRV_VPROV_BASE
'No Applicable Data Found"
Note 887383 aplies to solve the problem but the solution is update the
system to level patch 6 but we have a higher level patch (15).
How can we solve this issue?
Regards.Hello,
The Cube ZBCS_V10 cannot be a standard cube as it does not belong to SAP Name Space, generally starting with '0'.
Can you check on the logic behind population of this cube. Its a virtual cube i believe and there might be some FM or real TIme mode to extract data.
Also you can try to check whether you can display data in the cube. From the context menu of the cube, select display data. Here check whether you can see the needed data.
If you cannot then there is some problem with the data population.
Regards,
Shashank -
FCP error message: Unable to read the data on your source tape!
Hey,
So I have been editing on the MacPro now for over a year and I have never seen this message before...the message reads:
_*"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape."*_
Has anyone got this message and could help me out please? I need to edit these tapes A.S.A.P.
Thank You,
Erickwhy would it start a month later giving me problems instead of when it was updated?
That is a good point. Anything change since the time it worked to when it didn't? How about trying another firewire cable. Those can go south without notice, might cause this.
Shane -
Error in lsmw while reading the data.
Hi experts,
I have an error that tells my source structures has no field with the same name... I want to see my source structure. Is there any way to see the source structure back.hi
go to maintain source field, you can check your fields..
Thanks
Ahamed. -
Error reading the data from the remote cube
Hi all,
When we try to get the data for remote cube from LISTCUBE, we are getting the following msg.
1) Messages for DataSource 9AUPA_DP_HK_01 from source system AD1CLNT100
2) 224(/SAPAPO/TSM): No planning version selected
3) Errors have occurred while extracting data from DataSource 9AUPA_DP_HK_01
4) Error reading the data of InfoProvider UICHKRMTC.
Any Inputs?Hi,
Check whether the sourcesystem is responding.
And also in the error mesg: 224(/SAPAPO/TSM): No planning version selected
It seems you have not selected any planning version. Give any planning version in the listcube selection screen and execute.
Regards,
Ravi Kanth -
Hi all,
we are involved in a SAP BW Upgrade 7.0 --> 7.3.
During the manual follow up steps, we are trying to launch some Bex query to test if all works fine.
Some of this queries returns us the following message:
Query XXX reading the data;
the extended message says:
DiagnosisXXX
You need to replace variable XXX from as a boolean value. It can therefore only have the values 0 and 1.
Entering (MWKZ = , WAERS = , ...) under Currency/Unit is therefore not advisable. Only dimension = number is allowed.
System Response
The query cannot be generated and executed.
Procedure
Change the definition of the variables.1.
Procedure for System Administration
Our SAP BW System is Version 7.3 support package 10.
We found just the note 1873747 that seems like our message error but, unfortunately, the note itself have been just released with our support package (SAPKB73010).
Anyone have an idea?
Thx in advance
Best regards
RinoHello all,
Yes, I agree with Robert that with suppressing the message we can avoid the failure.
But, If the message is 541, you might have skipped the data which it reads. Query which you have executed must be with missing data.
If the message is "109 - No data was found", you can suppress it.
If you want to correct the 541 message either you have to reduce the selections of query or you should increase the memory elements.
Please correct me if I am wrong.
Thanks,
Bharadhwaz -
MSS 60.1.19 - Salary Development iView - Internal error wh reading the data
Hi guys!
I face the problem of an iView Salary Development. I get error: Internal error while reading the data. I found a thread with the same problem, but there is no solution. Did anyone of you solve this problem?
Thanx for answers!
PeterHI Peter
I have the ivew salary development wroking more or less. There are some problems with totals from wage types including IT14 & 15 which I have reported and waitnig for response frmo SAP..... but at least IT0008 is working ok on it.
I didn't get this message so let me know how to help...! Ha<ve you done the config for the iview yet?
helen -
Why do I get an error in AirDrop that reads The Apple ID certificate for is invalid.
Why do I get an error in AirDrop that reads The Apple ID certificate for XXXX is invalid. The XXXX would be the name of the other computer I am sending it to. I am trying to transfer files from my iMac to my son's MacBook Air which are both up to date and running Lion.
i had airdrop issues...
when sending to another machine from my own, the other machine instantly denied the request
when the other machine tried sending to me, it failed with a warning "apple id certificate is invalid"
after calling apple:
go to the apple>preferences>iCloud
log out
log in
do this on BOTH machines
fixed -
Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller
Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Event ID 1012 - There was an error while attempting to read the local hosts file
When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT -
Error 7 occurred when generating the data transfer program
Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR -
Validation Error: We can't read the package
Hope someone has some ideas, cause I'm out.
The error (We can't Read the package) doesn't really tell me much.
I have tried to upload this package for a couple weeks and I did see some information one time about a "username" variable not being valid. I have not be able to reproduce the information about "username" for several
days.
Fishing around I did find something that might be relevant in the AppxManifest.xml with the Publisher="CN=$username$" I don't know if this should be populating or not.
Using Visual Studio 2013 update 4. (Apache Cordova Template)
This application is an HTML 5/CSS3, Bootstrap, and AngularJS. I have successfully published this application to iTunes and Google Play.
Using directions provided here.
https://msdn.microsoft.com/en-us/library/windows/apps/hh975357.aspx
Build settings "Device", "Release" and "Windows Phone Universal".
In visual studio I select PROJECT, STORE, Create app package.
WIZARD:
Yes, I want to upload to the windows phone store.
NEXT (Account looks correct )
Selecting app name. App is listed based on the account as I would expect.
Create
Config: Version Number, Architecture Neutral (Release Windows Phone Universal), Include public symbol files
File is created:CordovaApp.Phone_1.0.22.0_AnyCPU.appxupload
Run app cert Kit 3.4: "PASS"
Details: All "PASS"
UPLOAD:Validation error: We can't Read the package
Clicking "Learn More" Takes me here.
https://msdn.microsoft.com/en-us/library/windows/apps/hh923027.aspx?f=255&MSPPError=-2147217396#package_validation_error_6_1
Any thoughts or suggestions would be great...thanks in advance.Hi Mobile Craig,
Move to publish forum for a better support. Thanks for your understanding.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
How to reset ipad2 if i forgot my iclouds passcode ?
the ipad2 wont let me go on to the next step because i dont know my icloud password
-
PS CS6 10bit with Quadro K4000 and 30" Dell U3011. My experiences...
Hello everyone. I had searched quite extensively when looking into a solution for my color banding on an ancient Apple 30" cinema display which was on it's last leg. That search led me to 10bit and it's surprisingly obscure implementation in PS. A
-
Using Ilife 11 shared imovie burning does not work
The process gets stuck during burning and will not finish, stayed at 1 minute for 24 hours
-
[SOLVED]Color Bash Prompt help
So I have been customizing my arch box and everything has been great except for one problem; the bash color prompt. I am kind of running a color screen where I am using the same shade of green, blues, grays, etc. I would like to continue that with my
-
My computer won't remember my user name and p'word for my optuszoo a/c
My autocomplete option is on and the service difficulties representative from optus was unable to help me.