Error running source setup.sh
This is my first time to get in touch with flex at all. So I am a blind rookie, hungry fro some action. I had two problems sourcing the setup.sh
1. The source.sh was unable to find the flash player gz.
# 2. I dont have the default ant and jdk on my ubuntu. and it always points to the defaults where as I even set them in the environment for this session. The error trace is at the bottom of the post.
Solution to first problem: I gave a path for the player. Does this mean the path is incorrect in the current version
Solution to second problem: I am checking if the HOME paths are missing only then use the defaults otherwise dont.
Changes are as follows:
Currently I have solved like this, Applications compile and run fine.
It could be wrong and thats why I am posting here.
=============================================
# This was tested on Ubuntu
elif [ $OS = "Linux" ]; then
#If ANT_HOME is not there then take the default one.
if [ ! -d "$ANT_HOME" ]; then
ANT_HOME=/usr/share/ant
fi
#If JAVA_HOME is not there then take the default one.
if [ ! -d "$JAVA_HOME" ]; then
JAVA_HOME=`readlink /etc/alternatives/javac | sed -n 's/[\\\/]bin[\\\/]javac$//p'`
fi
# Add player PATH for reuse eliminate chances of copy errors.
PLAYER_PATH=in/player/10/lnx
# Don't unpack the player every time, unless it's been updated
find $PLAYER_PATH -name flashplayer ! -cnewer $PLAYER_PATH/flashplayer.tar.gz -exec rm {} \;
if [ ! -f "$PLAYER_PATH/flashplayer" ]; then
echo "setup.sh: Unpacking player to in/player/lnx/flashplayer"
tar zxf $PLAYER_PATH/flashplayer.tar.gz
mv flashplayer $PLAYER_PATH/flashplayer
fi
=============================================
Trace of errors from the console, faced before changes.
/media/data/dev/flex-sdk/branches/gumbo_alpha$ source setup.sh
find: in/player/lnx/flashplayer.tar.gz: No such file or directory
setup.sh: Unpacking player to in/player/lnx/flashplayer
tar: in/player/lnx/flashplayer.tar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
mv: cannot stat `flashplayer': No such file or directory
setup.sh: Setting default ANT_HOME=/usr/share/ant
setup.sh: Setting default JAVA_HOME=/usr/lib/jvm/java-1.5.0-sun
setup.sh: WARNING: ANT_HOME does not exist:
/usr/share/ant
On Monday 17 Nov 2008, Shaaf wrote:
> # 2. I dont have the default ant and jdk on my ubuntu. and it always
> points to the defaults where as I even set them in the environment for this
> session. The error trace is at the bottom of the post.
setup.sh is intend to help you out, rather than always work.
Just set the required environment variables yourself and skip this step if
your setup is non-default.
> Solution to first problem: I gave a path for the player. Does this mean the
> path is incorrect in the current version Solution to second problem: I am
I *believe* the player is no longer in SVN because people were pulling from
there pre-public release and the Adobe folks needed to reduce load.
Unfortunately they are all busy at the mo @ MAX, but if you copy a recent
player into the correct place it should be fine.
Tom Chiverton
Helping to competently benchmark world-class distributed open-source
attention-grabbing services
This email is sent for and on behalf of Halliwells LLP.
Halliwells LLP is a limited liability partnership registered in England and Wales under registered number OC307980 whose registered office address is at Halliwells LLP, 3 Hardman Square, Spinningfields, Manchester, M3 3EB. A list of members is available for inspection at the registered office. Any reference to a partner in relation to Halliwells LLP means a member of Halliwells LLP. Regulated by The Solicitors Regulation Authority.
CONFIDENTIALITY
This email is intended only for the use of the addressee named above and may be confidential or legally privileged. If you are not the addressee you must not read it and must not use any information contained in nor copy it nor inform any person other than Halliwells LLP or the addressee of its existence or contents. If you have received this email in error please delete it and notify Halliwells LLP IT Department on 0870 365 2500.
For more information about Halliwells LLP visit www.halliwells.com.
Similar Messages
-
Unable to deploy any image with WIM file. Vanilla or Custom Image gives the following error:
ZTI Error – Unhandled error returned by LTIApply: invalid procedure call or argument (5)
Litetouch deployment failed, Return code = -2147467259 0x80004005
Failed to run action: Install Operating System.
Access is denied (Error: 00000005; Source: Windows)
Tried Giving Everyone Full rights to the deployment share
Rebooted Server
Updated Deployment Share
Any ideas would be great!
Thanks
Rick
Richard Rayhttps://skydrive.live.com/redir?resid=57E5397C8C507949!129&authkey=!AJDCfz7nGblrdQE&ithint=folder%2c.log
Please try this link.
Kris Da San Martino
The SMSTS.log shows
Expand a string: WinPEandFullOS TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Executing command line: cscript.exe "%SCRIPTROOT%\LTIApply.wsf" TSManager 2/18/2014 1:35:48 PM 1508 (0x05E4)
Process completed with exit code 5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
!--------------------------------------------------------------------------------------------! TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the action: Install Operating System.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionRetCode=5 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Set a global environment variable _SMSTSLastActionSucceeded=false TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Clear local default environment TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Let the parent group (Install) decides whether to continue execution TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
The execution of the group (Install) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Failed to run the last action: Install Operating System. Execution of task sequence failed.
Access is denied. (Error: 00000005; Source: Windows) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Sending status message . . . TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Executing in non SMS standalone mode. Ignoring send a task execution status message request TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sms_fre\sms\client\tasksequence\tsmanager\tsmanager.cpp,767) TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task Sequence Engine failed! Code: enExecutionFail TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
**************************************************************************** TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4)
Task sequence execution failed with error code 80004005 TSManager 2/18/2014 1:51:00 PM 1508 (0x05E4) -
Error run time DYNPRO_FIELD_CONVERSION
I have a dump:
Errore run-time DYNPRO_FIELD_CONVERSION
Verific. il 28.11.2007 h 02:12:16
A conversion error occurred.
Causa dell'errore
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
The program flow was interrupted and could not be resumed.
Program "SAPMM06B" tried to display fields on screen 0106. However, an
error occurred while this data was being converted.
Indic. per la correzione
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMM06B"
Screen number............ 0106
Screen field............. "EBAN-MENGE"
Error text............... "FX015: Sign lost."
Further data:
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
It is probably not possible to eliminate the system error
with ABAP alone.
If you have access to SAPnet, you can search for a relevant note
using the following keywords:
"DYNPRO_FIELD_CONVERSION" " "
"SAPMM06B" bzw. "MM06BO0R_RM06B-EPSTP"
"RM06B-EPSTP"
Ambiente sistema
SAP Release.............. "620"
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system......... "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 26
Short dump setting....... "full"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database owner........... "SAPR3"
Character set............ "it_IT.ISO8859-1"
SAP kernel............... "640"
Created on............... "Jul 16 2006 20:40:53"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "139"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "CONSULENTI"
Language key........ "I"
Transaction......... "ME52 "
Program............. "SAPMM06B"
Screen.............. "SAPMM06B 0106"
Screen line......... 26
Informazioni punto di interr.
The termination occurred in the ABAP program "SAPMM06B" in "RM06B-EPSTP".
The main program was "SAPMM06B ".
The termination occurred in line 14 of the source code of the (Include)
program "MM06BO0R_RM06B-EPSTP"
of the source code of program "MM06BO0R_RM06B-EPSTP" (when calling the editor
140).
The program "SAPMM06B" was started as a background job.
Errore verificatosi durante un'elaborazione Batch-Input
Dettaglio cd. sorgente
000010 *eject
000020 *----
000030 * Positionstyp aufbereiten *
000040 *----
000050 MODULE RM06B-EPSTP OUTPUT.
000060
000070 CALL FUNCTION 'ME_ITEM_CATEGORY_OUTPUT'
000080 EXPORTING
000090 PSTYP = EBAN-PSTYP
000100 IMPORTING
000110 EPSTP = RM06B-EPSTP
000120 PTEXT = T163Y-PTEXT.
000130
ENDMODULE.
Contenuto campi sistema
Cmpo SY Contenuto.................... Cmpo SY Contenuto....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY VU
SY-UCOMM
SY-TITLE Richiesta d'acquisto mod.: Riepilogo pos.
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Richiami/eventi attivi
N..... Tipo........ Nome..........................
Programma
Include Riga
Classe
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
Variabili selezionate
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
DIEN DIEN
4444
495E
EBAN-PSTYP 0
3
0
LIM LIM
4442
C9D0
RM06B-EPSTP
2
0
POTE TXP
5552
4800
T163Y-PTEXT Standard
57666676222222222222
341E4124000000000000
Chiamate applicazione
Il dump non riporta informazioni relative
Informazioni applicazione
Il dump non riporta informazioni relative
Note interne
The termination occurred in the function "dynpconv.c" of the SAP
Basis System, specifically in line 701 of the module
"//bas/640_REL/src/krn/dynp/dybas.c#4".
The internal operation just processed is "ENDM".
The internal session was started at 20071128021215.
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system ........ "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database user ID......... "SAPR3"
Rich. attivi nel nucleo SAP
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x11dd952a0
=> Stack address = 0xfffffffffffa920
=> Stack low = 0xfffffffffffa920
=> Stack high = 0xffffffffffff910
=> Stack Trace:
AixStack() at 0x1000206bc
CTrcStack2() at 0x1000207b4
rabax_CStackSave__Fv() at 0x1001520d4
ab_rabax() at 0x10014ef04
dyHandleError() at 0x1005a6850
dypcnvoXt() at 0x100cbd6cc
dynplend() at 0x1010cf268
dynpmcal() at 0x1010c6f60
dynppbo0() at 0x1010c5134
dynprctl() at 0x1010ce40c
dynpen00() at 0x100bd0c30
Thdynpen00() at 0x1000a1f7c
TskhLoop() at 0x1000a5298
tskhstart() at 0x1000bb0d8
DpMain() at 0x101579ca0
nlsui_main() at 0x10154d428
__start() at 0x1000002fc
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
Lista dei programmi ABAP in oggetto
Tipo
Programma
DataGen Ora
Dim.car.
Prg
SAPMM06B
25.09.2007 16:07:55
514048
Prg
SAPMSSYD
05.06.2002 17:09:33
16384
Prg
SAPFSYSCALLS
14.02.2002 14:22:47
6144
Typ
T160
12.05.1997 15:22:15
2048
Prg
SAPFMMEX
18.11.2007 09:34:59
177152
Typ
TSTCT
14.02.1998 14:31:34
2048
Typ
TMED
27.08.1994 21:59:16
2048
Typ
TPRG
14.02.1998 14:06:12
2048
Typ
T160D
11.02.2000 14:20:36
5120
Typ
T160V
14.05.1998 22:44:11
6144
Typ
T168T
28.08.1997 09:05:04
2048
Prg
SAPLMEXF
18.11.2007 09:35:00
166912
Typ
T162
02.10.2001 13:56:13
2048
Prg
SAPLSTUP
17.06.2004 12:05:43
65536
Prg
SAPLCNDP
17.06.2004 15:06:47
163840
Prg
SAPFGUICNTL
09.01.2003 17:18:52
20480
Prg
SAPLOLEA
17.06.2004 15:12:42
78848
Prg
SAPLSGUI
09.01.2003 17:15:12
31744
Prg
SAPLSTTM
17.06.2004 15:08:30
75776
Prg
SAPLSBDC
07.01.2003 18:31:25
38912
Prg
SAPLSFES
17.06.2004 15:15:58
174080
Prg
SAPLURFC
17.06.2004 14:25:28
16384
Prg
SAPLSPLUGIN
14.02.2002 14:22:48
6144
Typ
SWCBCONT
15.11.2000 17:55:11
3072
Typ
OLE_VERBS
04.04.1995 16:02:20
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Prg
SAPLSCNT
14.02.2002 14:22:47
24576
Prg
SAPSHDTV
17.06.2004 11:46:16
28672
Typ
EBANW
17.06.2004 15:55:16
21504
Prg
CL_CONTEXTFIELD_MM============CP
25.09.2007 16:07:49
9216
Prg
/1BCDWBEN/SAPLMEN0000
18.11.2007 09:35:16
237568
Prg
SAPLSENA
17.06.2004 14:19:40
28672
Typ
EBAN
13.11.2006 11:19:59
20480
Prg
CL_PROCESS_STATE_MM===========CP
25.09.2007 16:07:50
16384
Prg
SAPLSWUG
17.06.2004 14:22:25
53248
Typ
SWCONT
04.04.1995 16:18:01
2048
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
2048
Prg
CL_GOS_MANAGER================CP
11.04.2001 13:02:00
17408
Prg
CL_GOS_VIEW_MANAGER===========CP
24.01.2002 20:31:22
22528
Typ
SIBFLPOR
15.11.2000 17:53:54
2048
Typ
SGOS_MVOBJ
24.07.2001 09:18:06
3072
Typ
BORIDENT
28.08.1997 08:38:50
2048
Prg
SAPLSUU1
17.06.2004 15:13:06
165888
Typ
USR02
17.06.2004 15:05:37
7168
Typ
USREFUS
07.01.2003 18:24:17
2048
Typ
SIBFLPORB
15.11.2000 17:53:55
2048
Prg
CL_GOS_TOOLBOX_MODEL==========CP
17.06.2004 15:04:37
38912
Typ
SGOS_MODL
24.07.2001 09:18:05
4096
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSWOR
17.06.2004 15:08:55
270336
Typ
SWOTRI
03.01.1996 15:29:13
2048
Typ
SWOTRETURN
20.08.1998 10:59:29
3072
Prg
SAPLSWOH
14.02.2002 14:22:48
7168
Typ
SWOTENV
11.02.2000 14:20:34
4096
Typ
TOJTD
15.11.1995 03:08:46
2048
Prg
SAPLRHS0
14.02.2002 14:22:47
11264
Prg
SAPLSDIFRUNTIME
17.06.2004 14:20:44
82944
Typ
DFIES
09.11.2000 14:07:05
8192
Typ
X031L
15.11.2000 18:03:28
5120
Prg
SAPLSDNT
17.06.2004 12:06:43
199680
Prg
SAPLSUGS
21.11.2002 10:20:02
29696
Typ
TOJTD
15.11.1995 03:08:46
2048
Typ
TOJTB
14.02.1998 14:02:55
8192
Typ
SWOTLI
04.04.1995 17:30:59
2048
Typ
T100
28.08.1997 09:04:45
2048
Prg
CL_EXITHANDLER================CP
17.06.2004 15:04:37
26624
Prg
CL_ABAP_TYPEDESCR=============CP
17.06.2004 14:19:33
21504
Prg
CL_ABAP_ELEMDESCR=============CP
17.06.2004 14:19:13
18432
Prg
CL_ABAP_DATADESCR=============CP
17.06.2004 14:19:13
14336
Prg
CL_ABAP_REFDESCR==============CP
17.06.2004 14:19:33
16384
Prg
CL_ABAP_STRUCTDESCR===========CP
17.06.2004 14:19:33
19456
Prg
CL_ABAP_COMPLEXDESCR==========CP
17.06.2004 14:19:13
13312
Prg
CL_ABAP_TABLEDESCR============CP
17.06.2004 14:19:33
17408
Prg
CL_ABAP_CLASSDESCR============CP
17.06.2004 14:19:33
23552
Prg
CL_ABAP_OBJECTDESCR===========CP
17.06.2004 14:19:33
25600
Prg
CL_ABAP_INTFDESCR=============CP
17.06.2004 14:19:13
19456
Prg
CL_ABAP_SOFT_REFERENCE========CP
29.03.2001 16:42:12
7168
Prg
CL_ABAP_REFERENCE=============CP
14.02.2002 14:22:46
6144
Prg
IF_EX_GOS_SRV_SELECT==========IP
04.12.2000 16:22:18
4096
Prg
%_CABAP
07.01.2003 18:31:23
23552
Typ
SXS_INTER
30.11.1998 15:55:16
2048
Prg
SAPLSEXV
17.06.2004 15:04:40
106496
Prg
CL_BADI_FLT_DATA_TRANS_AND_DB=CP
17.06.2004 15:04:37
33792
Typ
SXS_ATTR
20.08.2001 12:23:27
4096
Typ
V_EXT_ACT
09.11.2000 14:27:05
2048
Typ
SXC_EXIT
09.11.2000 14:23:43
2048
Prg
CL_EX_GOS_SRV_SELECT==========CP
17.06.2004 15:04:37
13312
Prg
%_CSXRT
17.06.2004 15:04:37
11264
Prg
CL_EXIT_MASTER================CP
17.06.2004 15:04:37
13312
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Prg
SAPLBDLS
17.06.2004 11:45:48
176128
Typ
T000
11.09.1997 10:17:18
4096
Typ
SWOTRTIME
14.02.1998 10:19:46
3072
Prg
%_CSWOB
14.02.2002 14:22:46
13312
Typ
SWOTINVOKE
14.02.1998 10:18:40
6144
Typ
SWOTLV
04.12.2000 14:59:45
10240
Prg
SAPLSWCD
17.06.2004 15:06:55
78848
Prg
RBUS2105
13.11.2006 11:20:02
57344
Prg
CL_GOS_PUBLICATION============CP
13.11.2000 16:31:37
15360
Prg
SAPLSGOSHIST
17.06.2004 14:23:50
46080
Typ
EBKN
16.06.2004 13:09:57
9216
Typ
T161
16.06.2004 13:14:35
5120
Typ
T161T
14.02.1998 10:55:58
2048
Typ
CMMDA
18.09.2001 10:02:31
4096
Prg
SAPLMMDA
04.09.2006 11:00:54
65536
Typ
TWLAD
13.08.1997 14:04:45
2048
Typ
TTXID
27.08.1999 17:40:33
3072
Prg
SAPLSTXD
17.06.2004 15:06:22
347136
Typ
STEXTNAME
18.09.2001 10:03:52
1024
Typ
STXDRID
26.02.1999 14:48:42
2048
Typ
STXDRLANG
26.02.1999 14:48:42
2048
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Typ
STXDROBJ
26.02.1999 14:48:42
2048
Typ
THEAD
09.11.2000 14:15:08
6144
Prg
CL_ABAP_CHAR_UTILITIES========CP
07.01.2003 18:31:23
11264
Typ
STXH
17.06.2004 14:15:46
6144
Typ
TCATALOG
25.05.1998 12:19:20
3072
Typ
T168F
27.05.1992 20:16:27
3072
Typ
T168
27.05.1992 17:53:38
3072
Prg
SAPLMECCP
25.09.2007 16:07:53
39936
Prg
CL_BADI_MM====================CP
08.01.2003 16:43:11
9216
Prg
%_CCXTAB
14.02.2002 14:22:46
6144
Prg
SAPLEINH
25.09.2007 16:07:53
56320
Typ
T001W
16.06.2004 13:14:17
9216
Prg
SAPLVDAT
19.02.2002 12:59:51
25600
Typ
T163Y
28.08.1997 09:05:01
2048
Prg
SAPCNVE
14.02.2002 14:22:47
6144
Prg
SAPLOMCV
17.06.2004 10:54:26
16384
Prg
CL_EX_BADI_MATN1==============CP
17.06.2004 10:27:52
22528
Prg
IF_EX_BADI_MATN1==============IP
17.06.2004 10:53:59
4096
Typ
TMCNV
24.02.1999 03:33:25
3072
Typ
RM06B
17.06.1998 03:23:02
10240
Lista tabelle interne
Il dump non riporta informazioni relative
Indice delle tabelle applicative
Programma
Nome................ Contenuto..1.......2........3........4........5....+....
SAPMM06B
SYST |00000000000x010000000000000000
EBAN |300001100895000010NB B NB 1 Elena Varett20071
*EBAN | 00000 00000
EBKN | 0000000 00000000 000000x0C
AEBAN |3000011008950NB BBEUR |
EBANW |300001100895000010NB B NB 1 Elena Varett20071
RM06B | 00000000000000000010 00
*RM06B | 00000000000000000000 00
RM06E | 000000000000000 00000000 00000
TPRG |300IW2Formato settimana Sett. |
T001W |3006 PIATTAFORMA DI LEINI' 6 CEDI6 0000000
T023 |
T024 |
T160 |300ME52 VB B |
T160V |300C1XX A XX X X |
T161 |300BNB 000100102NBB NB 00000
T161T |300INB BRichiesta d'acquisto|
T168 |300B AB *** 1 106 0x0C0x0C0x0C0x0C|
T168F |300B AB XXX |
T168T |300IB0106002 |
TTXID |EBAN B04 X
T163K | |
T163Y | Standard |
T001L |
T160D | XXXXXXXXXXXXXXXXXXXXXX
T161E | |
SAPFMMEX
TMED |300BB |
SAPLMEXF
T161 |300BNB 000100102NBB NB 00000
T162 |300PT0B ...................................
SAPLSUU1
USR02 |300CONSULENTI ÷x9Fw'x97[æÆ0000000000000000A
USREFUS |300CONSULENTI
SAPLSWOR
TOJTB |BUS2105 XI RBUS2105
SWOTLV |BUS2105 EXISTENCECHECK M
TOJTD | |
SAPLBDLS
T000 |300Mandante produzione Arenzano EUR
SAPMM06B
*RM06E | 000000000000000 00000000 00000
MARA | 00000000 00000000
T006 | 00 00000000000000x0C 0
SAPLVDAT
TPRG |300IW2Formato settimana Sett. |
SAPLOMCV
TMCNV |300MATCONV 0x120000000x12
Directory delle tabelle applicative (inf. di gestione)
Programma
Nome.......................... tempo..........lungh....
SAPLOMCV
SYST 20010612125650 00002404
EBAN 20061113111959 00000892
*EBAN 20061113111959 00000892
EBKN 00000421
AEBAN 20000323224119 00000027
EBANW 00000896
RM06B 20000323224119 00000529
*RM06B 20000323224119 00000529
RM06E 20020124202505 00001154
TPRG 20000323231030 00000032
T001W 20040617141548 00000338
T023 20040616131428 00000102
T024 20040616131429 00000352
T160 00000035
T160V 00000050
T161 20040616131435 00000095
T161T 00000029
T168 00000035
T168F 00000044
T168T 00000013
TTXID 00000058
T163K 20000323230840 00000023
T163Y 00000026
T001L 20000323230832 00000069
T160D 00000069
T161E 20000323230840 00000025
SAPFMMEX
TMED 00000010
SAPLMEXF
T161 00000095
T162 00000234
SAPLSUU1
USR02 00000226
USREFUS 00000067
SAPLSWOR
TOJTB 00000453
SWOTLV 00000701
TOJTD 00000033
SAPLBDLS
T000 00000107
SAPMM06B
*RM06E 20020124202505 00001154
MARA 20071118093457 00001118
T006 20001109142345 00000080
SAPLVDAT
TPRG 00000032
SAPLOMCV
TMCNV 00000062
Blocchi di contr. CONT ABAP
Include Riga Codice sorg.
Ind. Nome FI Co Par01 Par2. Par3. Par4. Tab.
MM06BO0R_RM06B-EEIND 25 EXIT.
2502 BRAX 00
MM06BO0R_RM06B-EEIND 27 ENDSELECT.
2503 BRAX 00
2504 SQLS 08
MM06BO0R_RM06B-EEIND 31 ENDMODULE.
2505 ENDM 00
2506 -
MM06BO0R_RM06B-EPSTP 7 CALL FUNCTION 'ME_ITEM_CATEGOR
2507 FUNC 00
2508 FUNC 00
2509 PAR2 02 0336
2511 FUNC 10
2512 PAR2 01 03B9
2514 PAR2 01 03BA
2516 FUNC FF
MM06BO0R_RM06B-EPSTP 14 ENDMODULE.
>>>>> ENDM 00
2518 -
MM06BO0V_VRTKZ 6 CASE EBAN-VRTKZ.
2519 BREL 04
MM06BO0V_VRTKZ 7 WHEN '1'.
2520 when 00 02 0090
2522 BRAN 02
2523 BRAX 00
MM06BO0V_VRTKZ 8 RM06B-MKNTW = '3 '. "3 Nachkom
2524 MOVL 00 02 0136
MM06BO0V_VRTKZ 9 WHEN '2'.
2526 BRAX 00
Fine dell'analisi err. run-time
Help me.
Thank youHello Maurizio,
Thre screen field EBAN-MENGE is unable to handle a sign along with the value.
Regards,
Ammey Kesarkar -
Error 1308.Source file not found with 9.4.2 Admin Install point
I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?I am having the same problem, all the relevant info was already covered in the "thewaker" post above. I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
Acceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
Acceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks. -
Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David BaurI finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur -
JDev 10.1.3.3 and WebCenter - Error running WSRP Standalone Portlet
Hello: I am working with JDev 10.1.3.3 w/ the WebCenter extension on my WinXP PC. I have viewed the WebCenter How-To Demos (http://www.oracle.com/products/middleware/webcenter.html) and am replicating them in JDev. All is working except for the last in the Veeva Vacation demos (Building & Deploying Standards-Based Portlets). I followed the demo and successfully (so I thought) created an entry point, deployed the standalone portlet and registered the portlet producer. I dragged the VeevaProducer to the JSF page. Then with my Preconfigured OC4J running I tried to run the jspx page. Instead of seeing the application page, an error page appeared "Error instantiating web-application".
The first error description is:
"Error compiling :C:\Oracle\jdev10133\jdev\Veeva\ViewController\public_html: Syntax error in source or compilation failed in: C:\Oracle\jdev10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\application-deployments\current-workspace-app\Project1\oracle\portlet\wsrp\v2\soap\UnsupportedLocale.java C:\Oracle\jdev10133\jdev\system\oracle.j2ee.10.1.3.41.57\embedded-oc4j\application-deployments\current-workspace-app\Project1\oasis\names\tc\wsrp\v1\bind\runtime\WSRP_v1_PortletManagement_Binding_SOAP_Stub.java:35: error #300: WSRP_v1_PortletManagement_PortType not found in class oasis.names.tc.wsrp.v1.bind.runtime.WSRP_v1_PortletManagement_Binding_SOAP_Stub
implements oracle.portlet.wsrp.v1.soap.WSRP_v1_PortletManagement_PortType { "
I don't know what that means! Your help will be appreciated.
Thanks.You can create EAR/WAR file from JDeveloper and then use the OC4J 10.1.2 managment console to deploy them to the server, there is no one-click-deploy support from JDev 10.1.3 to OC4J stand-alone 10.1.2
-
Timeout error while filling setup tables
HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM -
Error 1311, Source file not found, measurementstudio5.cab
I'm installing Measurement Studio for Visual Studio 6.0 and I encounter: Error 1311 Source file not found, measurementstudio5.cab
Any ideas?Hello David,
I am also experiencing an Error 1311, but during the install of LabVIEW 2012 and 2013 (64-Bit).
Win7 x64, Acer laptop.
First problem I encounter is:
After putting in my info and agreeing to the licence agreements, the first error pops up says the followign:
NI LabVIEW Run-Time Engine 2011 SP1:
Error 1310. Error writing to file: Crogram Files (x86)\Internet Explorer\Plugins\LV2011ActiveXcontrol.dll. Verify that you have access to that directory.
Options: Abort/Retry/Ignore
Things I've tried:
Retry button--never get's past the error.
Uninstalling Internet Explorer and restarting--Still assumes that it's there, and error remains.
Reinstalling updated Internet Explorer and restarting -- no change.
Checking the directory file and verifying that permissions for every user and System is set to full control -- No change.
The only way to get past this error seems to be to press the Ignore button.
A few moments after ignoring the first error, another error pops up. It says:
NI Labview Run-Time Engine 2011 SP1:
Error 1311. Source file not found: C:\Users\[my U/N]\Desktop\National Instruments Downloads\LabVIEW 64-bit\2013\Products\LabVIEWruntime_mft.cab. Verify that the file exists and that you can access it.
Options: Retry/Cancel
Things I've tried:
Verifying that the file exists (it does) and that I have access to it (I do) and checking the permissions to verify full control --no changes.
Retry -- does nothing.
Cacel --aborts the installation and indicates instal failure.
Can you help me with this? I've installed LV on two other computers and they worked fine, but my laptop simply doesn't want to take the install.
Thank you in advance,
Thomas -
"Error running javac.exe compiler" when using ant to compile Eclipse plugin
Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target
<!-- ===================================================================
Compile specified plugin
target parameters:
param.plugin.dir: the plugin directory
param.plugin.targetJarFile: the name of jar file for the given plugin
param.plugin.src.dir: the folder name of source codes. Note: it is relative path name
param.fork: indicate if another process is forked to run javac
=================================================================== -->
<target name="compilePlugin">
<!-- Prepare compile environment -->
<!-- Delete obsolete build folder -->
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
<!-- Delete obsolete jar file -->
<delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
<mkdir dir="${param.plugin.dir}/${build.dir}"/>
<!-- Compile source codes -->
<javac srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
destdir="${param.plugin.dir}/${build.dir}"
failonerror="${javacFailOnError}"
verbose="${javacVerbose}"
debug="${javacDebugInfo}"
deprecation="${javacDeprecation}"
optimize="${javacOptimize}"
source="${javacSource}"
target="${javacTarget}"
fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
<classpath refid="compile.classpath" />
</javac>
<!-- Create plugin jar file -->
<copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
<fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
</copy>
<jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
OceanmanI encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps. -
DYNPRO_SEND_IN_BACKGROUND errors in source system
Hi All,
Yesterday night we kicked DELTA Process Chain.
The PC failed While loading the 0GL_ACCOUNT Attributes, and showing the message Errors in Source System.
and also Failed at Cost Element Attributes but both the error messages are same.
Checked the source system connections and repeated the process, but it was failed again. and tried to load manually and again failed.
When we check the DUMP in Source system (ECC) in ST22 showing the message as below:
"DYNPRO_SEND_IN_BACKGROUND" Current screen: "SAPLSTRD " 0351
Note: We ran FULL load day before yesterday and Ran INITIAL yesterday, We are running DELTA TODAY.
one thing is we just deleted the GL attirbutes Requests manually and loaded INIT , we are able to do INIT load perfectly. but while trying DELTA only this problem is causing.
Thanks in Advance,
TeenaHello ,
Sometimes the problem happens because the background users do not have the correct authorization. Please check the information in the SAP note 150315.
Kind Regards,
Des -
Error 1311 Source file not found
Hi.
I have tried to repair my Adobe Acrobat 9.0 because it's not working. I got Error 1311 source file not found.
then the following path c\ProgramFiles(x86)\Adobe\Acrobat9.0\Setup\Files\{AC76BA86-1033-F400-BA7E-000000000004}\D ata1.cab
Verify that the file still exists and that you can access it.
What do I do now? I can't open any PDF files from the net.
Also, I have rec'd the following: Unable to find Adobe PDF resource files.
C\ProgramData\Adobe\AdobePDF\Settings\*.joboptions Then it said you must have administrator privileges to install these files. Contact your local administrator. How do I do this? I am the administrator on my home computer!Thank you Pat.
A couple of things...
First off I am disabled and sometimes a little slow on the uptake.
Subsequent to my first query, I was successful in downloading the Adobe
Reader XI. However it only allows me to view PDF's that reside on my
computer. If however I want to look at any docs on the web or that people
send me via e-mail I cannot see them They flash for a moment, like a tease
and then say there was a catastrophic crash with not much after that.
If I follow your instructions below, I presume that I will be deleting the
A R X1 as well and as it was very very difficult to get it is the first
place, would you be able to help me with a reinstall?
I think what happened is that my grandson did a "cleanup" on my computer
and deleted only parts of programs...and thus the part that are missing
will not allow for the subsequent updates.
So...thank you for your patience and confirm that I should uninstall and
using the cleaner and then reinstall using the links you provided?
Thank you so much!
Sass
On Wed, Oct 29, 2014 at 1:40 AM, Pat Willener <[email protected]> -
Error in the Data Selection - Errors in Source System RSM 340
Hey Everyone,
I'm having an issue with loading a Delta for 0MAT_PLANT_ATTR. This is the second night it has happened, where I get the error "Error in the Data Selection". This error happens in the EXTRACTION part of the Monitor. And, we cannot run another Delta to see if it'll work, we have to delete the old Delta Init, and run a new one. The other error is "Errors in Source System - RSM340". That's as much it gives.
Could anyone suggest why this would be happening? I checked RSA3 in R/3, and no errors on the extraction. I also checked sm37 against the job that loads that data, and it completed successfully. I honestly don't think there's an issue with the data. We cannot have this happen often, and I just need to know if this is something that can be corrected.
Thanks,
JohnThere is nothing wrong with the TID's or anything like that. There is also no selection criteria in the infopackage.
When the Delta fails, the error occurs under EXTRACTION in the monitor. It seems to be successful under TRANSFER and PROCESSING in the monitor, which I find strange. Also, I run a new Delta Init with Data Transfer, and that works just fine.
So, I'm not sure what it could be? -
GeoKettle: Error running javac.exe compiler
Hi,
I am trying to use GeoKettle exactly as mentioned at
http://209.85.229.132/search?q=cache:JHfrxCo7y0YJ:forge.osor.eu/docman/view.php/143/250/Kettle_Devel_guide_v0.odt+geokettle+spoon+java+api&cd=2&hl=en&ct=clnk&client=firefox-a
But when I try to build it, i am getting the following error.
[javac] Compiling 135 source files to D:\workspace\geokettle\classes-core
BUILD FAILED
D:\workspace\geokettle\build.xml:74: Error running javac.exe compiler
Can anyone guide me please to resolve this problem.
Best Regards
Tabbasummost likely the javac executable is not on the system path. Try typing 'javac -version' in a command prompt and see what response you get.
If it is something like 'javac is not a recognized...', locate where the JDK is installed and add its bin subdirectory to the PATH system variable. Restart any command prompt and type javac again.
You DID have a JDK installed, didn't you? -
Failure of infopackage step in process chain - Error in source system.
Hello Experts,
We are experiencing this during the execution of process chain.
All the step for data loads within BW(DSO to DSO, DSO to cube) are failing with error -
- Error in source system
- Error during data selection
Please note that we are 3.5 data flow and thus, data load within BW is through emulated data source and the infopackage. Steps running such infopackages for emulated data source are failing in process chain with error above.
Surprisingly, when I run the infopackage manually out of process chain it runs successful without any error. But when I run through process chain it fails.
Any clue or suggestion? We have already tried doing re-initialization for infopackage.
Appreciate your inputs.
Regards,
PK.Hi,
When we run data loads thru process chain it will run in background. as per the available background application servers your request will be processed.
as my your during your load time server will be on high load.
please check your system busy schedule and schedule your process chains.
Check Tx - SM50, if you have less application servers, then ask basis to create few more to application servers to process the request at busiest time.
check about increasing parallel processing and default data transfer settings.
go to info package---> menu scheduler--> data settings for default data transfer.
Thanks -
Hi
Just deployed the Business Package for Assets 50.3.1 on Portal version 7 with SP8, when running the Assets detail, my assets iviews always display: "Error in Source. Message not available."
even all other iviews on the same page still work as expected.
has anyone got the similar problem before? please help!!!
many thanks in advance!
GangWhen logged on to R/3, choose the following from the menu:
System > Status...
In screen area "SAP System data" click on the button next to "Component version".
Look for the component named only "PI", and check wether it exixts and what release it is, it should be at least 2003_1_XXX (where XXX represents your R/3 Appl version).
Also, check that you have the component "WP-PI" installed with the release 600_XXX (where XXX corresponds to your SAP Basis release).
I know I needed to check/install these two when I configured the Assets package.
/Christine
Maybe you are looking for
-
ITunes on an iMac won't open at all
I have 10.6.8 and have been playing iTunes regularly. Today, I click on icon in dock-one bounce, no open. Try in app folder...no open. Tried time machine... can't open files due to newer version....Try updates, no new updates.....Finally just downloa
-
OC Crashed (I Think)
So this is what's happened so far: I took an old Blackberry Pearl 8220 flip phone with no battery and ordered a battery for it online. When it arrived and I put it in, the same thing happens. It powers on momentarily, displays an analog clock icon fo
-
How do i get my photos from my iphone on to the computer? i cant understand icloud
I am struggling to save the photos on my old iphone as i do not understand how to put them on my computer. When i plug my phone into my computer itunes comes up but i do not know where to go from there, i have also logged into icloud.com and there is
-
Tablespace size monitoring in Oracle 10g
Hello Our environment: Oracle 10.2.0.3 3-node RAC, ASM, Linux x86-64 We are using EM Grid Control as a monitoring tool for RAC databases. We have "tablespace SPACE USED (%)" metric configured for all RAC databases. For some reason this metric does no
-
Can I do away with the passcode page?
Can I do away with the Passcode page, it is becoming a nusiance?