Error running...VERY URGENT, PLEASE

Hi everyBody.
I am programming a GUI with NetBeans 4.1, which uses javax.comm API to use serial port of computer. I have finished my GUI and it always run OK when I use NetBeans. I installed properly the API and I selected the API to be used also in NetBeans. Then I created a .jar file to run the program, but when I run it out of NetBeans, i get this interruption:
java.lang.NoClassDefFoundError: javax/comm/PortInUseException
at my_pirene_editor.Initial$8.run(Initial.java:928)
at java.awt.event.InvocationEvent.dispatch(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventdispatchThread.pumpOneEventForHierarchy
at java.awt.EventdispatchThread.pumpEventsForHierarchy
at java.awt.EventdispatchThread.pumpEvents (unknown Source)
at java.awt.EventdispatchThread.pumpEvents (unknown Source)
at java.awt.EventdispatchThread.run(unknown Source)
Please, any help to solve this problem!!!
Thank you very much

Make sure the Java Communications API JAR file(s) are in the CLASSPATH when you run outside of NetBeans.
- Saish

Similar Messages

Dev6i Installation Error ? (Very Urgent please)

I have oracle 8.1.5 installed on the NT Server4.0, SP4. When i tried to install the Developer6i by running installed, Dr. Watson comes with access violation. With the same user right I was able to install the database, but with developer it gives error.
Has the sequence of the database and developer has the problem.
Any suggestion or comments are appreciated.
Thanks.
SPokal.

I have oracle 8.1.5 installed on the NT Server4.0, SP4. When i tried to install the Developer6i by running installed, Dr. Watson comes with access violation. With the same user right I was able to install the database, but with developer it gives error.
Has the sequence of the database and developer has the problem.
Any suggestion or comments are appreciated.
Thanks.
SPokal.

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!

Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!

That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI          5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav          8.0.14
org.virtualbox.kext.VBoxNetAdp          4.2.16
org.virtualbox.kext.VBoxNetFlt          4.2.16
org.virtualbox.kext.VBoxUSB          4.2.16
org.virtualbox.kext.VBoxDrv          4.2.16
com.logmein.driver.LogMeInSoundDriver          1.0.2
com.Greatdy.driver.SystemAudioCapture          1.0.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.iokit.IOBluetoothSerialManager          4.0.8f17
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleHDA          2.2.5a5
com.apple.driver.AppleMikeyDriver          2.2.5a5
com.apple.driver.AGPM          100.12.75
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleSMCPDRC          5.0.0d8
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.3
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.ApplePolicyControl          3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics          7.3.2
com.apple.driver.AppleBacklight          170.2.2
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUSBTCButtons          227.6
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.8f17
com.apple.driver.AppleUSBTCKeyboard          227.6
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.SCSITaskUserClient          3.2.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.1.0
com.apple.driver.AppleUSBHub          5.1.0
com.apple.driver.AppleFWOHCI          4.9.0
com.apple.driver.AirPort.Brcm4331          561.7.22
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleAHCIPort          2.3.1
com.apple.driver.AppleUSBEHCI          5.1.0
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.4
com.apple.security.TMSafetyNet          8
com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.driver.DspFuncLib          2.2.5a5
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.2.5a5
com.apple.iokit.IOHDAFamily          2.2.5a5
com.apple.iokit.IOAudioFamily          1.8.6fc18
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleGraphicsControl          3.1.33
com.apple.driver.AppleSMC          3.1.3d10
com.apple.driver.IOPlatformPluginLegacy          5.0.0d8
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.IOPlatformPluginFamily          5.1.1d6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB          7.3.2
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.kext.triggers          1.0
com.apple.driver.AppleUSBBluetoothHCIController          4.0.8f17
com.apple.iokit.IOBluetoothFamily          4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          230.5
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBMergeNub          5.1.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.iokit.IOFireWireFamily          4.4.8
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOEthernetAVBController          1.0.1b1
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.iokit.IOUSBFamily          5.1.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.11
com.apple.kext.AppleMatch          1.0.0d1
com.apple.driver.DiskImages          331.7
com.apple.iokit.IOStorageFamily          1.7.2
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4

Encrypting and Decrypting Data(Its Very Urgent, Please Help.)

Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.V

Is this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C.

Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.

Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
Selvam

Is your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.

HT201317 I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

I had 250 photos stored in photo stream but i restore them now they are just 150. I m missing about 100 photos those were very urgent please please help

Photo stream only keeps photos in iCloud for 30 days, even though up to 1000 photos will remain on your device until you delete them (such as by restoring your phone). When you turned on photo stream again you only got back the photos added in the last 30 days as the others have already been removed.
If the missing photos were still in your camera roll when you last backed up, restoring the backup should recover them. (The backup includes camera roll photos but not photo stream photos.)

Very urgent please.

very urgent please.
some one make account on skype which is not belong to me , and put my mobile number and many people call me pleassse help me and till me how to hide my mobile number from this account which is not mine please help its avery urgent realy it disturb me
name on skype is vvvvvvvvvvvv525n this for person idont know and cheat using my mobile number
and you can check by calling me on the nubmer which not belong to account owner

like what I mentioned above, you need to report this to the appropriate department. this is a user-to-user forum only, and users here (including the admins and mods) have very limited to users' account. they can't assist you regarding that case.
CONTACT SKYPE CUSTOMER SERVICE | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES | WINDOWS PROBLEMS TROUBLESHOOTING | SKYPE DOWNLOAD LINKS
MORE TIPS, TRICKS AND UPDATES AT
skypefordummies.blogspot.com

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

How to send Zip files as attachments !! Very urgent, Please help!

I am sending PDF files as attachments using java mail (it works fine). But now my requirement is to zip the PDFs and send them as attachments instead of actual PDF's. But i don't know how to achieve that. does java mail API support zip attachment facilities? I have looked in activation API also, but i couldn't find anything helpful. even i searched the forums, but no clue. Please, anybody help me about this, it's very urgent.
thanks
sri

Check the first "if". If I specify an attachment, then a myme multipart doby is created: one for text and the other for the attachemnt I use this myme ovbject only for attachemnts, because some ISPs have problems and report error in email format if the attachemnet is missing and it contains only text and no attachment.
static public void send(String to,
     String from,
     String host,
     String smtpPort,
     String subject,
     String body,
     String fileAttachment,
     String attachmentMimeType,
     String username,
     String password,
     String debug)
throws Exception
     // create some properties and get the default Session
     Properties props = new Properties();
     props.put("mail.smtp.host", host);
     props.put("mail.smtp.port", smtpPort);
     props.put("mail.smtp.timeout","5000");
     props.put("mail.debug", debug);
     Session session = null;
     if (username != null && password != null)
          props.put("mail.smtp.auth", "true");
          MyPasswordAuthenticator auth = new MyPasswordAuthenticator(username, password);
          session = Session.getDefaultInstance(props,auth);
     else
          session = Session.getDefaultInstance(props, null);
     //session.setDebug(true);
     // create a message
     MimeMessage message = new MimeMessage(session);
     message.setFrom(new InternetAddress(from));
     InternetAddress[] address = InternetAddress.parse(to, false);
     message.setRecipients(Message.RecipientType.TO, address);
     message.setSubject(subject);
     message.setSentDate(new Date());
     // create the message part
     if ( fileAttachment != null && fileAttachment != "NO" )
          MimeBodyPart messageBodyPart = new MimeBodyPart();
          //fill message
          messageBodyPart.setText(body);
          //Multipart multipart = new MimeMultipart();
          Multipart multipart = new MimeMultipart("alternative");
          multipart.addBodyPart(messageBodyPart);
          // Part two is attachment
          System.out.println("----->fileAttachment DISTINTO de NULL");
          messageBodyPart = new MimeBodyPart();
          FileDataSource fds = new FileDataSource(fileAttachment);
          messageBodyPart.setDataHandler( new DataHandler(fds));
          messageBodyPart.setFileName(fileAttachment); //<-- El archivo atachado.
          multipart.addBodyPart(messageBodyPart);
          //EN DESARROLLO el envio de attachment!!
          // Put parts in message
          message.setContent(multipart);
     } else { //Envio es solamente TEXTO
          message.setText(body);
     // send the message
     Transport.send(message);
Regards,
Vladimir

Doubt in setting values-- very urgent - please!

hai,
i am creating a java bean ..
public void setTitle_cont(String proj_title_cont[])
     for(int i=0;i<3;i=i+1)
     this.proj_title_cont[i] = proj_title_cont;
public String getTitle_cont()
{//error come here - says "missing return statement"
     for(int i=0;i<3;i=i+1)
     return proj_title_cont[i];
setTitle_cont() is working fine..but getTitle_cont() shows error...
can anyone please help out..its very urgent..
thanx in advance
regards
koel

Your code looks strange, it contains some errors. First of all, what does your set...() method do? You have a for-loop that does the same thing 3 times. Your get...() method has a return inside a for-loop. That makes no sense; the method will return at the first iteration.
What is the type of the member variable proj_title_cont? Is it a strring array (String[]) or a single string (String)?
You probably wanted to do something like this:
// member variable
private String[] proj_title_cont;
public void setTitle_cont(String[] proj_title_cont)
this.proj_title_cont = proj.title.cont;
public String[] getTitle_cont()
return this.proj_title.cont;
}Jesper

ORA-04062 - very urgent, please help

Error "ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed" appears while refreshing materialized view with DBMS_MVIEW.REFRESH, the configuration is described below, please, any suggestions what cause the problem?
I have the master database:
db_master
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
and replica database:
db_replica
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
the master and replica databases are installed at different hosts
At db_master:
1. I create table TEST
CREATE TABLE TEST (ID NUMBER PRIMARY KEY);
2.Then create materialized view log on TEST
CREATE MATERIALIZED VIEW LOG ON TEST;
At db_replica:
1. create dblink MASTER to db_master
2. create materialized view
CREATE MATERIALIZED VIEW MV_TEST REFRESH FAST AS SELECT * FROM TEST@MASTER
At db_master:
1.Insert some test values to TEST
INSERT INTO TEST VALUES (1);
INSERT INTO TEST VALUES (2);
INSERT INTO TEST VALUES (3);
COMMIT;
At db_replica:
1. call in job (every 10 sec) DBMS_MVIEW.REFRESH(‘MV_TEST’), or manually:
begin
DBMS_MVIEW.REFRESH('MV_TEST');
end;
sometimes (not at every call the below error callstack appears)
17:07:22 ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
17:07:22 ORA-06512: at line 4
Please, help me solve this problem, what cause ORA-04062?

Zjawka,
This forum doesn't consist of paid support personell.
Labeling your request as 'very urgent' must be considered rude.
If you would have looked up the error at all in the online documentation,
you would have got:
ORA-04062: %s of string has been changed
Cause: Attempt to execute a stored procedure to serve an RPC stub which specifies a timestamp or signature that is different from the current timestamp/signature of the procedure.
Action: Recompile the caller in order to pick up the new timestamp.
No why do you do take the trouble to dump all in this junk in a volunteer forum, and you can't be bothered to look up the error message?
Sybrand Bakker
Senior Oracle DBA

Clustered Servers and Applet (Very URGENT Please)

Hi,
I'm using win2k/CF application server 4.5/IPlanet web server/NN4.79/JRE1.4.1/.
I have an applet in one of my web page which downloads a file from the web server(stored in http://www.abc.net/doc/zip directory on the server).
Now when I run this code on the development server, everything works fine.
But in production environment, we have 3 clustered web servers controlled by a controller (Local Cisco Director) machine. The applet code looks like this:-
strURL = "http://www.abc.net/doc/Zip/"; //the URL from which the zip is to be downloaded. Basically it hits the Controller first
     strZipFileName=getParameter("zipFileName");
     strURL = strURL+strZipFileName;
          //Get Connection to Server and Download the file
          try{
          objUrl = new URL(strURL);
          httpCon = (HttpURLConnection) objUrl.openConnection();
               //DownLoad the File
               InputStream fileInputStrm = httpCon.getInputStream();
               // create a file object which will contain the directory structure to copy in the local machine
               localZipFile = new File(strLocalFilePath+strZipFileName);
               FileOutputStream fileOutStrm = new FileOutputStream(localZipFile);
               int ch;
          while ((ch = fileInputStrm.read()) != -1) {
                    fileOutStrm.write(ch);
               // Close the InputStream, HTTP connection , File stream
          fileInputStrm.close();
          httpCon.disconnect();
          fileOutStrm.close();
Now when the home page of the site is loaded it makes the connection and controller redirects this request to one of the web servers (say 1) which is least loaded.
Now when the applet is loaded, the new connection is established to the controller and it may redirect the request to any one of the 3 web servers (not necessarily to 1 which is required). Now sometimes it hits the right web server on which the required zip file is stored, and sometimes it doesn't hit the correct server.
Any clue what we can do in this scenario so that the applet downloads the correct file from the right server?
Please help it is very urgent....
Thanks

Did you ever get a response to this or figure out how to run in a clustered environment? I am now running into the same issue and would be interested in whatever you learned.

Log4j problem ---- VERY VERY URGENT PLEASE

Hi,
I am new to log4j. In my project( web application -- a testing framework ), there is a requirement to log the errors in a different filres for different requests ( the request may come simultaneously ) , by taking the log file path from the user interface.
To achive the requirement , I am taking both the log file name and log4j.xml file path from the user interface and updating the log4j.xml at runtime, So I am able to log for different requst in different files , but while the 2nd log4j.xml ( the log4j.xml for 2nd request ) is configured ( using DOMConfigurator.configure ) , the errors which are belongs to 1st request are also wrriten in the 2nd log file ( which is configured by log4j.xml -- 2n request ) .
Please help me to find out the solution for this problem( to log in different files for different request distinctly ).
Thanks in advance

chandan111 wrote:
Please help me to find out the solution for this problem( to log in different files for different request distinctly ).Since this was "very very urgent", I'm probably too late. Anyway:
The correct way to do this in Log4j would be to use the NDC (Nested Diagnostic Context ) class.
Article

Doubt in getting values-- very urgent - please!

hai,
i am creating a java bean ..
public void setTitle_cont(String proj_title_cont[])
for(int i=0;i<3;i=i+1)
this.proj_title_cont = proj_title_cont;
public String getTitle_cont()
{//error come here - says "missing return statement"
for(int i=0;i<3;i=i+1)
return proj_title_cont;
setTitle_cont() is working fine..but getTitle_cont() shows error...
can anyone please help out..its very urgent..
thanx in advance
regards
koel

Your getter method should be:
public String[] getTitle_cont()
return proj_title_cont;
}

SAPscript Output Problem - Very Urgent - Please help

Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
John

Ok, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

Error running...VERY URGENT, PLEASE

Similar Messages

Maybe you are looking for