Error RWB: Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR

hello,
i've a interface RFC to JDBC,
in RWB only one message 'Adapter Engine' with the follow error:
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service bs_rfc_int, interface namespace urn:sap-com:document:sap:rfc:functions, interface Z_SDC No sender agreement found for , , , , ,
The sender agreement exist, ii had changed (can activate) and activate the sender agreement, refresh caché,..however the error continue...
It's occurs in production, after transporting..
thank very much

Hi Silvia,
Please perform full CPACache refresh using below URL
http://<host name>:<http port>/CPACache/refresh?mode=full
Also, have a look on SLD config....ECC properly pointing to PI or not..
Regds,
Pinangshuk.

Similar Messages

Gnupgp, pacman-keyring -- keyserver receive failed: System error|why?

Hello, I followed the official instructions about gnugpg and the pacman keyring https://www.archlinux.org/news/gnupg-21 … n-keyring/
pacman -Syu haveged
systemctl start haveged
systemctl enable haveged
rm -fr /etc/pacman.d/gnupg
pacman-key --init
pacman-key --populate archlinux
which worked fine for the main repositories.
As I use the infinality-bundle repository I had to re-add the key for infinality but that led to that error:
# pacman-key -r 962DDE58
gpg: keyserver receive failed: System error w/o errno
==> ERROR: Remote key not fetched correctly from keyserver.
Meanwhile I know that changing the keyserver to the mit-keyserver prevents that error:
/etc/pacman.d/gnupg/gpg.conf
no-greeting
no-permission-warning
lock-never
keyserver hkp://pgp.mit.edu:11371
keyserver-options timeout=10
This combination of problem and solution is shared by two other users:
https://bbs.archlinux.org/viewtopic.php … 6#p1482676
https://bbs.archlinux.org/viewtopic.php … 9#p1482709
So while the solution/workaround is clear, I'd like to understand why that problem appeared in the first place.
Any idea?

So it's probably not my fault? Good to know. Maybe the server was overload due to that gnupgp change?
Thanks for your answer!

Getting the error: Error while receiving by HTTP error code: 110

Hi,
I have developed an interface which actually gets data from SCM system and in BPM to gets additional data from R/3. There are five synchronous call to this R/3 to get different sets of data. I am using only one communciation channle from BPM to R/3. The interface works perfectly OK in the development system. When the interface is migrated to the test system I found that the four calls work perfectly fine while the last call error out as below and the J2ee server goes down:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any input/help will be appreciated. I have tried increasing timeout/connection alive time but still not get resolved.
Thanks in advance,
Sushma

Hi Prateek,
Thanks. But this note I have checked before and this seems not related. I actually found out the system logs in SM21 and saw the "Operating system call recv failed (error no. 10054)". What I did then is I seach notes related to this error and found a numebr of SAP notes. And I have informed the Basis guys to look into the notes and the system logs. They are working on this and they are deleting the old messages which have errored out. They are suspecting the system memory or too many old messages would have caused this issue.
If you have any knowledge of why this error would have occurred please let me know.
Thanks,
Sushma

Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE

Hi All,
I am getting Error when i am viewing my salary slip in ESS.
The Error i am getting is :
Internal error in the spool system., error key: RFC_ERROR_SYSTEM_FAILURE
So can anybody help me out in this.
Regards,
Dhruv Shah

Solved the Error by deleting the spool in the Backend.
Spool was overflow.
Regards,
Dhruv Shah

Error while releasing PO : System error: block object EKKO, Key PO Number.

Dear All,
I am getting error while releasing PO : System error: block object EKKO, Key PO Number.
Please help to resolve.

Hi Friend,
How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
If you can give us solution, it will be more useful and more appreciated
REgards
RS

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

Error in Local Message System: Error when opening an RFC connection Message

Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon     Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: partner "local:sapgw00' not reached
Error Details     LOCATION: SAP-Gateway on host local / sapgw05
Error Details     DETAIL: NiPConnect2
Error Details     CALL: connect
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 40142
Error Details     ERROR NUMBER: 10060
Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 2835
Error Details     RETURN CODE: -10
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Wed Jan 11 23:26:54 2012
Error Details     VERSION: 38
Kindly Help.....

Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj

Error while receiving by HTTP (error code: 110) ?

Hi Experts,
I am working on IDOC to file Scenario.
I am getting this error in SXMB_MONI. What may be the reason.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Best Regards,
Anil

Check these threaads:
Re: XI Error when upgraded to SP14 (Error Code 110) CLIENT_RECEIVE_FAILED
Regards,
ravi

Deployment error:Error Code:-17500, Unknown System Error in TestStand - Read Seq Files in Workspace.vi-

Help!
When trying to deploy a test system i got the following error:
Error Code:-17500
Unknown System Error in TestStand - Read Seq Files in Workspace.vi->TestStand - Find Dependent Files.vi->TestStand - Add File and Dependent Files.vi->TestStand - Add All TestStand User Files to File Info Array.vi->TestStand - Update File Info.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
I then tried to re-deploy previously successfully deployed systems - same error. (I have done nothing to my teststand setup/installation/engine or deployment files since the last successful deployment)
I removed teststand & then re-installed it - i still got the same error. These files it is searching for do not exist on my pc.
Any ideas what has gone wrong/how to fix it?
cheers
Fi

I've just had exactly the same problem and after posting a message, have been forwarded to this thread. Luckily it looks as though we've found a solution, or a cause of the problem. One of my work colleagues (SercoSteve on discussion forums) suggested removing the Teststand 3.1\cfg directory, and replacing it with a default one from another machine, and this seems to have done the trick and made the deployment wizard be able to analyse the files and build. We are editing files in cfg so I've now got the task of replacing each file in this directory one by one to find which is causing the problem.
I'll add another post when I find out which one it is.
David Clark
CLA | CTA
CLA Design Ltd
Hampshire, England

Error BCOS088 "Error in local message system: Error while allocation..."

Hello,
I getting an error while creating a support message with "help->create support message".
The message number is BCOS088 "Error in local message system: Error while allocation: Overwrite a protected Message xxx not create."
I read a lot of threads about errors while creation of support message, but nothing helps.
Here are the facts:
- The error occurs on SolMan 4.0 system (sap basis rel. 7.0, SP15).
- BCOS_CUST: OSS_MSG | W | NONE | CUST620 | 1.0
- authorization trace without error
- DNO_CUST04: NO_USER_CHECK = X
So there is no authorization error, because of no RFC destination and successfully authorization trace.
What could be the reason of this error?
Thank you for answers, Tina

Hi Tina,
internal number range used for ABA Messages/Basis Notifications should match the external number range used for service desk messages.
For ABA messages:
Goto tx: DNO_CUST01 -> SLF1 -> Details
Should show number range 01
Number ranges for this object are defined via tx: DNO_NOTIF
For Service Desk Messages (Support Message SLFN):
Goto tx: SPRO -> "Check number range for Service Desk Message" -> SLFN -> Details
Should show number range 01 internal, 02 external
Number ranges for this object are defined via tx: CRMC_NR_RA_SERVICE
Number range 01 (internal) of ABA message should match number range 02 (external) of Support Message.
You may use other ranges but you should make sure they match.
Hope this helps.

Error reading table TOBJ - System Error when accessing Analysis of Change Requests

Hi Experts,
When I am trying to access Status Report or Processing time I get the following errors:
Error reading Table TOBJ - system error, An error occurred when getting data from the
processor and Log not found (in main memory).
I am not sure how this table gets populated or how to check for inconsistencies.
We have already checked the patch levels and they are on the same level for all environments.
We never had these errors in our Dev and Qa environments. We recently got a new TREX environment, could that be causing any of these errors.
Any ideas how to troubleshoot this problem?
Thanks
Riaan

For info. The problem was revolved with 2 notes.
1668882 and then apply the NWBC runtime 1963267.

Error in receiver SAP system , while reading the xml received over Proxy

Hi,
I am having one FTP to Proxy scenario, receiving complex XML file at FTP and have to pass this exact file to proxy in a single field.
As no mapping is required, created a data type with single node and both sender and receiver end.
After executing scenario, Data is displayed properly in PI moni, but when the file is received at SAP end, its giving error in SAP system moni that
"Error during XML => ABAP conversion".
The same scenario, when we are executing using SOAP or Mail sender adapter and proxy receiver, the interface is working fine at both ends.In SOAP and mail scenario, they are sending XML data enclosed in SOAP envelope.
but when the data is received at PI, the SOAP envelope is removed, and CDATA is being read by PI, and interface working fine.
Please provide your inputs in case of FTP sender.
Thanks,
Ruchi

Hi Ganesh,
Thanks for your response.
SOAP and Mail scenario are also using the same inbound proxy structure , and the proxy is working fine in both cases.
For FTP scenario we are reusing the same inbound proxy but we are facing error .
SAP is getting
"XML to ABAP Conversion error with error id as "CX_ST_MATCH_ELEMENT " System expected the element 'Namespace of the inbound service interface' .
Please guide.
Thanks,
Ruchi

Error in Receiver - IDoc with errors added

Hi All,
I am getting error in 56 - IDoc with errors added in receiver System.
I am new in Idoc - please tell me How to resolve this issue..
Thanks in advance..

Hi all thanks for reply .
All are the help full answer ,
I use T-code WE19 and change partner profile and execute now it is fine.
But i have checked all configuration regard partner profile from T-code WE20 it looking everything is fine but in Test tool for Idoc Processing by t-code WE19 i have checked it will taken wrong partner profile detail after giving correct manually now it is working fine.

Error message in PO : System error (error in method PO_POST)

Hi all,
I'm working on BAdI ME_PURCHDOC_POSTED
for Requisition qty checking with PO qty with some tolerance(+/-).
For some conditions I have to terminate the PO posting(ME57).
In the implementation of the method POSTED, afetr some validations, mentioned the statement:
This is my custom message in method >
message e032(/SISLEMCU/MSG01) with wa_ekpo-matnr
When doing this the posting of the document is terminated.
But after it displays the custom message, it followed by the message "System error (error in method PO_POST)" and then terminated.
Here are my questions:
1.I don't want to display "system error (error in method po_post)" message.
2. I want the the screen to hold the data i entered previously after the custom message was prompted and not terminate straight away, as i will need to reenter my data for PO again.
Thanx in Adv.
Regards
Uday

Change for a BADI more suited (not in the update of after-save process) like ME_PROCESS_PO_CUST (Method PROCESS_ITEM, CHECK).
ME_PURCHDOC_POSTED is too late.
Regards

Itunes will not open error message- APSDaemon.exe system error

Running windows 7 never had a problem with iTunes until I tried to downlaod update yesterday...iTunes will not open and have error message 'MSVCR80.dll APSDaemon.exe system error......
How do I fix itunes and and the system error? Thanks

Murray3703, only one other time did this happen to me. It was over 6 years back when I had an iPod Nano and after doing the reinstallation, it wiped out all of the content and applications and corrupted by Nano to the point Apple said it could not be fixed. I had no other things corrupted on my laptop. So, I know it was not a virus.
I have tried fixing the problem with redownloading and "repairing" the problem but, it did not work. Since the Nano incident, I am somewhat reluctant to do this for fear that I will loose all of my content and paid applications to apple? I also have Windows 7.
Did you have any issues with uninstalling and reinstalling? Thanks.

Error RWB: Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR

Similar Messages

Maybe you are looking for