Error safari could not open page because it could not load any data

safari could not open page because it could not load any data???? Whats the problem. I am trying to get on my works benefits page to change 401k investments.

Since the latest 'update' on Dec 13th, I can't access Safari at all. A page of gobbledegook comes up.

Similar Messages

  • Safari can't open page because you're not connected to the internet

    Suddenly I can't access the internet. Don't know if this means anything but we had a bad storm last night. I didn't think my Mac was affected because it runs normally as far as the programs and I had turned it off but when I try to get to the internet I get the above message. Naturally, it's driving me nuts since I'm not too computer savvy about these things. I need someone to tell me in non-technical terms what to try. Since I have not got internet access at home, I'm sending this from my office computer. Does anyone have any suggestions for me?

    Hi,
    Your profile is a little confusing.
    iMac Tiger Mac OS X (10.4.11) It might be Mac OX X 10.4.10
    Which version of Tiger is your Mac running?
    Carolyn

  • TS1398 my problem is my iphone 4s is connected to the internet(wi-fi) with full signal strength but freezes when browsing and says "Cannot Open Page, Safari could not open page because the server stopped responding".

    my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
    "Cannot Open Page"
    "Safari could not open page because the server stopped responding"
    I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.

    Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
    IF that does not work -
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    Finally - if problem still present -
    Go to Settings>General>Reset
         Reset the network settings - you will need to add the password of your home WiFi in your phone once more
    The device should turn itself off & back on then go into Settings>Wifi and join your network

  • Safari could not open page because the server stopped responding

    "Could Not Open Page.... Safari could not open page because the server stopped responding"
    ....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
    WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
    Tried at work on another wireless network - same response.
    Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
    Anyone experienced the same and fixed it?
    cheers

    I'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.

  • Iphone 4 error message while in wifi "safari can not open page because server stopped responding" after iOS6 update

    I am currently using my Iphone 4 in wifi networks only after canceling my cell phone plan. Over the weekend I did the IOS6 update on the iphone as well as updated my macbooks itunes and OS X operating systems updates that were available.  Since that my iphone's safara app won't connect.  After it trys to connect for a minute or 2 I recieve the message: "safari can not open page because server stopped responding".  However ALL other apps that require the phone to be connected to wifi for use work properly, i.e app store, imessage, pinger, facebook, etc.  I have checked all network setting and they looked right to me.  Anything I'm missing, ideas to try, or am I sol (lol)?  Safari worked perfectly before the update so I thought I might have done something wrong or forgot to change some type of setting.
    Thank you!

    If you can access Facebook while on Wifi at home, but you are unable to access it while away running on your carrier's 2G network, I could phone your carrier.  You have already completed the Cellular Data troubleshooting for the iPhone, so any limitations keeping your from connecting to Facebook over cellular will have to be answered by your carrier.

  • Safari couldn't open page because server stopped responding

    i keep getting this error when i try to open a page on safari
    SAFARI COULDN'T OPEN PAGE BECAUSE SERVER STOPPED RESPONDING
    It happens whether on wi-fi or cellular data -

    Are you able to use other apps that require internet access?
    If so:
    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
    Clear the browser cache: Settings App > Safari > Clear History + Clear Cookies and Data.

  • I keep getting server or network errors "safari could not open page because the server stopped responding"

    i get frequent error messages such as "Safari could not open because the server stopped responding"

    I've been getting lots of error messages lately. The one you described is the most recent
    I've also received
    Safari cannot open the page.
    The error was: "A data connection is not currently allowed.".
    and
    Safari cannot open the page because it could not load any data.
    I'm not connected to Wifi and have full service LTE. I have received the last error message described while connected to WiFi as well. iPhone 6 - 8.1.3

  • Safari cannot open page because ipad is not connected to the internet

    Hi, I updated too iOS7 recently and everything was fine (except iBooks!) until yesterday, when I got the message saying "Safari could not open the page ... because your iPad is not connected to the internet." I'm using wireless connection, and my iMac is working with no problem. Have tried most suggested things here like rebooting, resetting all settings etc. but am getting nowhere. Would appreciate any assistance, Thank you.

    reset network settings...settings>gen>reset>reset network..
    if that does not work.
    backup the device on itunes.
    restore with itunes.
    setup as new on the device. then try it.
    if it works try restoring from the backup,, if it does not work after that then the backup as a bug.
    you then would set the device up as new again and just use it without the back up

  • Safari Can't Open Page Because Server Stopped Responding

    I am trying to connect to a web site for Deal or No Deal Mobile game. When I try to access it, I get an message that Safari could not open the page because the server stopped responding. I sent the text as instructed and rec'd a repsonse back with the web site. I have tried accessing it from the text message and also by typing it in. Same reponse both times.

    Try this... tap Settings / General / Reset / Reset Network Settings.
    Then restart the iPad. Press and hold the Sleep / Wake button until you see the red slider then swipe the slider to power off. Then press and hold the Sleep / Wake button until you see the Apple logo.

  • Can not open page - Safari can not open page because website is invalid

    I have this sign coming up when I try to get onto Safari.  I press the OK but it doesn't let me go back or put in anything on safari so basically I have no web access.  Hhow can I reset Safari so it does not remember the site and lets me use the web as usual.  It is a weather site I clicked on through a goodgle search:
    accuweather.com

    Hi everyone, I also had the same problem with connecting to the internet at home, with a brand new iPad, but managed to sort it out today with the help of the Genius Bar staff. I figured it was a router/software issue because wifi/internet was working at my university and at the Apple store. As posted in other threads on this forum, your iPad was probably not assigned an IP address.
    I am using an Airport Express 802.11n, and this is connected via ethernet to my modem from my internet provider in Switzerland. It seems the problem is with "Bridge Mode", and my modem won't give out an IP address to my iPad. To fix this, I used the "Share a Public IP address" mode instead of Bridge mode. In Airport Utility, I went to Manual Setup - Internet - Internet Connection tab - Connection Sharing - Share a public IP address.
    Then in the DHCP tab, DHCP reservation, I added my iPad to this list. it will ask you for your iPad's MAC number, which you can find in your iPad Settings - General - About - Wifi Address. I did not bother adding my Macbook or iPhone and wifi is still working for them so I think this IP address reservation step might be optional.
    For those not using Macs or Airport Utility, unfortunately I am not familiar with setting up routers in the browser, so I can't help you there, but hopefully you get the idea.
    Internet now works, but I haven't tried it long enough to know whether I have issues with dropping wifi, but at least the IP address is obtained and I can surf.
    Hope this helps others!!!!!!

  • Error: Adobe Reader could not open pdf because it is not a supported file type or has been damaged

    I have copied over the "first five lines of rubbish" , a suggestion of another contributor.
    Here they are:
    %PDF-1.3
    1 0 obj
    /PDF /Text /ImageB /ImageC /ImageI
    endobj
    5 0 obj
    << /Length 10096 /Filter /FlateDecode >> stream
    xœµ}Y“ 7’æûšÍ&#127;€Ù˜iÕcd0 Ä%3> «’dM ³j2“âô®ö!E&©Ú®ƒÊJ«&#127;¿î8  Dd &#144;ÑÔØ4IÏ  ~}î8 ñoÿãw‘Ãÿ5E™å¢íñ&#127;÷;ñAÜý üR4™Ì;ÑÖ]V6¨»k QvYSÓS¯6âÅëJôbóYõ í¿ ™·™”&#141;Ø\ˆ¢/²¼ƒNÚ.këRl>‰ ×›“ÍB\¾ —oÏ/ÅÙâêdµy·Xn&#144;´Y&#157;,×W—+xäürù7±ù¿bó b±!NEqˆUY¶YÓHÑ6MÖK©X½Z&#157;Ÿ½YˆsèsqŠ=ŠÕ {ç ÿ—’µËòº ,²¢ª&#129;‹Ìš® }V¶¥/¬ &#157;7‚ª)³¢•JXè  oe• …•uõþtó~µ ¯Ï/ bùþÝ«Åê'1äß·YÙ‹¶ÊAç-*¹(j ‰ dŠ{™—0f&#143;;ˆê8¹ ʬÎKQ´Y  yžgU/‘Ëç  uV&#129;nÛJ “ÓË&#129;4eÙƒ 5‰SuYWõ‰âT`Î@›yž·
    —ˆžÑ" ƒRv‰"A ²n<‘V÷ß wC©Zì^:#õY_$
    Õ¶YQúFÊ‹®ç2Ñ#d¦¶“‰2õ †æëNp ô»Ñ[VV©ž€ &#141;]0µ/Þ
    ”&ë>ë: Yu™Um&#157; X²ÁpÔ:éÁ…‘Ù ‚È«÷ç Ã`® ¹Ê†X¶ Ae™ÈRõ!}Cµ/òâEÑ7’©’žÓš”y–‡ªTcB/  m‹^&#141;© ,…  ÕPe
    tÞ– Pn´pýð¸¿þø8ÐA[ƒ
    If you can read this ... go for it.  For info, we have an app that gets county data, makes a PDF and allows a user to open or save it.  Out of the 12 districts and 88 counties we have, some districts and their counties work fine.  2 in District 5, 3 in District 4, these all produce this error.
    A "Cause" given at this link: http://kb.calyxsupport.com/kb/article.php?id=769 is that a corrupting character exists in the file path and/or the filepath is too long.  On this line of thought, it is being looked into if these 5 instances are somehow corrupting the file path when it is being concatenated in the app or, in the case of these 5 instances we know of, is the concatenated file path too long?
    Well, in case the rubbish leads to an answer, there you have it!
    Thanks!

    I have copied over the "first five lines of rubbish" , a suggestion of another contributor.
    Here they are:
    %PDF-1.3
    1 0 obj
    /PDF /Text /ImageB /ImageC /ImageI
    endobj
    5 0 obj
    << /Length 10096 /Filter /FlateDecode >> stream
    xœµ}Y“ 7’æûšÍ&#127;€Ù˜iÕcd0 Ä%3> «’dM ³j2“âô®ö!E&©Ú®ƒÊJ«&#127;¿î8  Dd &#144;ÑÔØ4IÏ  ~}î8 ñoÿãw‘Ãÿ5E™å¢íñ&#127;÷;ñAÜý üR4™Ì;ÑÖ]V6¨»k QvYSÓS¯6âÅëJôbóYõ í¿ ™·™”&#141;Ø\ˆ¢/²¼ƒNÚ.këRl>‰ ×›“ÍB\¾ —oÏ/ÅÙâêdµy·Xn&#144;´Y&#157;,×W—+xäürù7±ù¿bó b±!NEqˆUY¶YÓHÑ6MÖK©X½Z&#157;Ÿ½YˆsèsqŠ=ŠÕ {ç ÿ—’µËòº ,²¢ª&#129;‹Ìš® }V¶¥/¬ &#157;7‚ª)³¢•JXè  oe• …•uõþtó~µ ¯Ï/ bùþÝ«Åê'1äß·YÙ‹¶ÊAç-*¹(j ‰ dŠ{™—0f&#143;;ˆê8¹ ʬÎKQ´Y  yžgU/‘Ëç  uV&#129;nÛJ “ÓË&#129;4eÙƒ 5‰SuYWõ‰âT`Î@›yž·
    —ˆžÑ" ƒRv‰"A ²n<‘V÷ß wC©Zì^:#õY_$
    Õ¶YQúFÊ‹®ç2Ñ#d¦¶“‰2õ †æëNp ô»Ñ[VV©ž€ &#141;]0µ/Þ
    ”&ë>ë: Yu™Um&#157; X²ÁpÔ:éÁ…‘Ù ‚È«÷ç Ã`® ¹Ê†X¶ Ae™ÈRõ!}Cµ/òâEÑ7’©’žÓš”y–‡ªTcB/  m‹^&#141;© ,…  ÕPe
    tÞ– Pn´pýð¸¿þø8ÐA[ƒ
    If you can read this ... go for it.  For info, we have an app that gets county data, makes a PDF and allows a user to open or save it.  Out of the 12 districts and 88 counties we have, some districts and their counties work fine.  2 in District 5, 3 in District 4, these all produce this error.
    A "Cause" given at this link: http://kb.calyxsupport.com/kb/article.php?id=769 is that a corrupting character exists in the file path and/or the filepath is too long.  On this line of thought, it is being looked into if these 5 instances are somehow corrupting the file path when it is being concatenated in the app or, in the case of these 5 instances we know of, is the concatenated file path too long?
    Well, in case the rubbish leads to an answer, there you have it!
    Thanks!

  • My ipad 2 says its connected to the internet but when i go onto safari it says safari can not open page because its not connected to they internet yet i have full connection

    I have tried resetting internet settings but didnt work so what can i do

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
     Cheers, Tom

  • I open my safari internet in my macbookpro oneday and it says cant open page because you are not connected to the internet. I look into the network but it was connected to a network why is that?

    Pls help muacbook doent want to connect with wifi . But the airport has signal and the network im using is also connected in the system preference

    Hello there, Chelleman.
    The following Knowledge Base article should provide assistance in troubleshooting your issue:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • PS7.0.1 Could not open file because it is not the right kind of

    Hi:
    With prior versions of PS I could open a .pdf, either from a single page file or from the whole document. But now using PS7.0.1 the subject error message is all that I get. I'm using a registered version of Acrobat 9 Pro to do the extraction. The goal is to extract a drawing from the pdf document, clean it up in PS and save for web publication.
    I've looked at the forums, knowledgebase and Google with no luck.
    Any ideas on how to get it to work?
    Have Fun,
    Brooke Clarke

    Hi Buko:
    -------SOLVED--------
    In Acrobat under File Export there is an option for images in a number of different formats. Just the thing.
    Thanks again & Have Fun,
    Brooke Clarke

  • "Safari can't open page because it can't find the server"

    So i bought an ipod touch at the start of April and i still can't figure out how to access the internet, itunes, etc at my house. I have tried EVERYTHING and NOTHING seems to work.
    when i'm uptown i can get on the internet to work as long as no password is required.
    my ipod touch says that it is connected to the internet, but then "cannot find server" pops up when i go on safari, and only the IP address and subnet mask are filled out. Also, my IP address is 169...
    I have a dlink router, if that helps.
    I am getting very frustrated with this, as my main reason for buying the ipod touch is the internet feature. I know that i am not the only on with this problem, so if anyone has found a solution i would really appreciate it.

    Hey melnyk_1928,
    When a device has a 169.254.x.x IP address it does not have a valid IP address and cannot connect to the Internet. This article provides more information: http://docs.info.apple.com/article.html?artnum=58618
    Generally WPA2 personal is going to be the best wireless network security option. IF you are using WEP you'll want to use a 5 character or 13 character password for 40 or 128 bit WEP.
    http://docs.info.apple.com/article.html?artnum=108058
    Jason

Maybe you are looking for

  • Problem while deploying the ADF application in weblogic 10.3

    Hi, We did the application using ADF and EJB3.0 in JDeveloper11g relese and this application is working fine when i run in the JDeveloper release. When i try to deploy the same application in weblogic 10.3(Which I downloded and installed) i am gettin

  • IS IT POSSIBLE 2 BUILD A NEW XML FROM DAMAGED ITL? SAVE FERRIS

    OK. Here's my situation. I have an HP notebook running on VISTA. ITUNES version 8.1.1....... My computer shut off abruptly while I was running ITUNES and after I restarted it and started up Itunes, I got the damaged ITL message. No big deal, I still

  • How to connect external sensors to labview?

    i want to ask How can i connect external sensors to NI labview for my final year project.? here are my lists of sensors: a. Temperature sensor (LM35) b. Humidity sensor (HH10D) c. Light sensor (LDR) d. Moisture sensor

  • Excise amt not updating in J1IIN (STO)

    Hello everybody, We are facing issue in excise invoice in stock transfer order scenario. We are doing following process- 1) Me21n with order type UB (stock transfer order) 2) VL10B 3)VL02n (PGI) 4) VF01 (for proforma invoice) now when we do J1IIN, sy

  • Cancellation of Commitment

    HI Friends, I'm facing one problem. The net value in service request created in PS is 30L for item qty one & unit is each. PO was created with item qty one & unit as each but the value was 3L. now service request in PS & PR got non modifiable mode be