Error :sap error:vf-171Does't contain any items with open quantities
Dear sap Experts,
An Error coming while doing billing against to delivery as *"Does't contain any items with open quantities" sap error:VF-171
i have checked status overview of order and its not blocked. give me hits regarding this issue.
My advance thanks to all.
Narendra
Dear Narendra,
Need to check the VL02n for given shipping point , also if the said material shows is not available then you can even check MMBE, this report shows on order stock so you can remove this on order stock.
On order stock can be removed by using vl02n, put F4 in the outbound delivery field enter it. All open delivery list (not picked or not posted for goods issue will come)
Regards
Sandeep D.
Similar Messages
-
'Document does not contain any items' error while posting GR from BAPI
Hello Friends,
I am trying to post GR from BAPI 'BAPI_GOODSMVT_CREATE' but some time it post successful and some time it does not post..gives error 'Document does not contain any items'....i have search all option but did not get any solution why this error is coming....kindly help me if you have any information regarding that.
The strange thing is i have alrady posted GR with some test data and later on again am trying to post GR with same test data but it is giving error as above.
For your information...i am using enhancement spot in standard program for GR posting...could it give any problem.
Regards,
Rajkishor.Solved by my self...problem was i were using enhancement spot in standard program because of this it was creating problem have search new enhancement spot and put my code out there now it is working fine.
Thanku very much all of you for your reply. -
hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you
hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer -
MIGO - PO doesn't contain any items
Dear Gurus,
Did the stocktransfer through sd route from one plant to another depo, then did the replenishment delivery through VL10B, then did the proforma invoice and then the excise invoice, then we've also observed the stock in MB5T falling in stock -in-transit.
Now while doing MIGO , given the Po no and pressed enter it says PO doen't contain any items. the items are not copied from PO to Migo, it give the above message. please suggest
When i did the same scenario in development evrthing was through. this problem occurs in production
Please adviseDear,
Please check Purchase Order.
Enter t-code ME23N.
Enter your purchase order. Go Item level in Confirmation tab available in purchase order item detail level.
Check in Confirmation Control Key"Tracking: Import" is exists.
If yes than remove it from ME22N and save purchase order than try for MIGO.
NOTE: - Check it each item wise for purchase order.
Regards,
Mahesh.
Edited by: Mahesh Wagh on Aug 13, 2008 4:23 PM -
Error message in Logic "audio configuration contains unknown items"
I am using Logic Studio with an apogee Duet and Mac Book Pro.
So far I love the apogee duet for it's simplicity and sound. I have
however started to receive this error message working with Logic Studio,
almost anytime I start a new track, add a plug-in or instrument, etc.
"Audio Configuration contains unknown items"
It did not do this from the very beginning but started after a few
sessions. I have tried re-installing the driver disc for the Duet but it still happens.
when it does pop-up i can click the ok box and after clicking several times
it will go away and let me proceed.
Could anyone please advise me.
thank you very much.Maybe this happen bacause you put many additional info in your "Aple discussion" profile about the software that you use, but we can also say you the same as Logic message:
your detailed "Audio configuration" profile info contain a "unknow item"
Whitch is your audio interface?
G
PS: anyway, try to trash Logic preferences. -
I just installed Lightroom 5 but can't import photos, there is no import option anywhere. Get pop up saying error attempting to change modules.
I had this with the trial , then I purchased license and still happens. Any help with this ??<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
-
Error in payroll simulation rgdir already contains an entry with the same l
hi all
please help am having a problem when running a payroll simulation which says rgdir already contains an entry with the same logical key even when i run the correcting report i still encounter the same program
thnxDid you try to run SAP program to rebuild payroll directory RPUDIR00, as sometime this gets corrupted ?
-
Screen savers+iTunes library dose not contain any songs with artwork.
iTunes Artwork saver does not work. Any suggestion.
ITunes 10.5. MacBook Pro Mid 2010. Mac OS X(10.7.3).I have just purchased a new Imac running 10.8 mountain lion, after loading new songs into itunes I too had no screen saver working showing the art work.
This had nothing to do with voice memos, no other items were connected so have tried this method and it works twice on both computers, the other is running leopard.
If all your music is on the main hard drive, check in finder and your itunes folders should be in music, all I did was make a new folder and call it music 2, make sure its under music on the left hand side, drag the itunes music folder containing only the music into this. From this go to itunes in applications delete itunes into trash, restart computer then download the latest version. When all opened up you should get a home page showing get music from icloud or scan for media, press scan and let the new version find it on your computer, when finished go to screen saver settings and notice the itunes screen saver working.
I don't know why this works either its a software fault with apple or just my luck, but I have had no problems since and looks greats on the screen. -
Error when other user want to change list item with rejected status
Hi All,
I have list with Content Approval option.
One of users edits one of the items, which are being rejected. After that, other user wants to edit same item. Second user doesn't see rejected changes from other users, he changes some field in this item and want to save changes.
Unfortunately, SP shows error and doesn't save changes. Content Approval is still Rejected.
Why SP doesn't allow other users to change this item ?Hi,
According to your post, my understanding is that second user get an error and can’t save changes when one user and the second user are editing the same item in a list at the same time.
I do this test in my environment, and the result is the same as you get.
In SharePoint, the system enables you and your colleagues to view the same item in a list at the same time.
However, it’s by design that the system can’t allow both you and your colleagues to save the their corresponding changes when they are editing the same item in a list at the same time whether this list enable the Content Approval option, the Content Approval
status of the current item or not.
If one user first click on the “Save” button to save the modified item, he can save the changes back, and all the late users will get the error and can’t save their modified item when they click on the “Save” button.
For more information, you can refer to:
http://blog.ciber.com/2014/say-goodbye-to-save-conflicts-co-authoring-and-real-time-communication-for-sharepoint-forms-with-signalr/
http://adrianhenke.wordpress.com/2010/08/20/sharepoint-error-save-conflict-your-changes-conflict-with-those-made-concurrently-by-another-user/
Best Regards,
Yumi Fu -
I think ever since we moved to v33, I've been having an irritating issue that whenever I open a new tab that isn't connected to a website yet and try to enter a website address, it won't connect to ANY website. Doesn't matter if I hit Enter to try to make it go, doesn't matter if I click the right-pointing arrow button to make it go, doesn't work. I can go into a tab already connected to a website, type in a new website there and it'll create a new tab and take me to the new website, but not if I use new tab button.
Anyone else had this issue? Any fixes?Sorry, that didn't help as I'm able to connect to websites, just not in a particular way.
For instance, I am able to type in and connect to websites IF the tab is already in use with a website (i.e. if I were to type "yahoo.com" in the address bar of this tab FF would open a new tab and take me to yahoo.com) but not when it is a completely new tab. -
Can a PO contain line items with different valuation classses?
You advice will be deeply appreciated.
Thanks,
LindaHi
Valuation class depend on material Mater and material gruop
as per stander for one material master you have one valuation class
If your material is split valuation then according to valuation type you can assign valuation class in material master
But for same material with differnt valuation class in po it is not possible unless you have differnt material code
Regards
Kailas Ugale -
WIS 00015 error- Multiple Query Filters contain a prompt with same name
Hi
I am working BOXIR2 environment. I created two prompts at Universe level- one of Date field and one on agency name field.
syntax for the prompts is
customerInfo.RSRCE_NAME = @Prompt('Enter value(s) for AgencyName ','A' , , ,)
datetable.STARDATE =datetable.STARDATE.STARTDATE = @Prompt(' 'Enter value(s) for StartDate:','D' , , ,)
When I include even one of the prompts in the report I am getting an error WIS 00015 Multiple Query Filters contain a prompt with the same text, but the prompts use a different operand type.
If I try to change text of one of the prompts in Universe selection statement, then I see the prompt two times in the report.
Please let me know how to overcome this issue.Ok, I've simplified the case.
Here is the real case :
Object filter =
Based on object =
.[LEVEL01]
Object filter =
Based on object =
.[LEVEL01]
In WBI query result I take these objects :
.[LEVEL01]
.[LEVEL01]
.[4IUX93YJGXQEHGLX0T0GPNA9Y]
In query filters, my 2 filters with same text :
1.
I run the query.
Answer to question 'Single Year Period ?' = Period 06 2010
==> MDX error
A database error occured. The database error text is: Echec de l'exécution de la requête MDX SELECT { .[4IUX93YJGXQEHGLX0T0GPNA9Y] } ON COLUMNS , NON EMPTY CROSSJOIN( .[LEVEL01].MEMBERS, .[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM SAP VARIABLES INCLUDING .[Z12010006] INCLUDING .[Z12010006] avec l'erreur Invalid MDX command with . (WIS 10901)
And you can see that the value sent to both filters is the same and come from the first filter .[Z12010006] instead of applying the value to each filter .[Z12010006] for the first one and .[Z12010006] for the second one.
Please, notice that if I change the order of this 2 filters in the WBI query, the MDX generated become :
SELECT { .[4IUX93YJGXQEHGLX0T0GPNA9Y] } ON COLUMNS , NON EMPTY CROSSJOIN( .[LEVEL01].MEMBERS, .[LEVEL01].MEMBERS ) DIMENSION PROPERTIES MEMBER_CAPTION ON ROWS FROM SAP VARIABLES INCLUDING .[Z12010006] INCLUDING .[Z12010006]
Thanks for your help.
G.OM. -
Hi Gurus,
After running the monthly batch job for IP30, user is getting the following error message in the spool for a particular Maintenance Plan
"IW 338:No operations w/ valid maintenance packages available in maintnce plan XXXXXX"
Now based on the message text, it seems that the package validity might be the issue but I have checked the package validity and this package is valid from 21.03.2011 and the batch job for IP30 has run on 10.05.2011. So I am unable to proceed further.
Kindly help me to investigate the cause of this error message.
Thanks & regards
Vikas HaliHI.
pl read following and resolve it
No operations w/ valid maintenance packages available in maintnce plan
200000104
Message no. IW338
Diagnosis
You want to generate an order from a maintenance plan, whose task list
does not contain any operations with valid maintenance packages.
The order that you want to generate would not contain any operations.
This is not allowed.
System Response
The system does not generate an order.
Procedure
Make sure that the maintenance packages for the task list are valid for
the planned date of the maintenance call. You can do this subsequently
by using the back-dated change numbers.
regards
Ganesh -
SAP Error when initializing work area SYST
Hi,
We performed a system copy, can start sap, can start the oracle database, and we upgraded the new kernel. However, we still get the error
"SAP Error when initializing work area SYST"
when attempting to log-in to SAP thru the GUI. We looked at many logs in the process.
Please hlep so we can resume post system copy steps.
the sap system is a BW copy
A few error lines from certain logs:
more dev_disp
Thu Oct 30 23:35:34 2008
ERROR => DpHdlDeadWp: W14 (pid 3018) died [dpxxdisp.c 14531]
ERROR => DpRqCheck: mode 0 in status CANCEL [dpxxdisp.c 6970]
Thu Oct 30 23:35:36 2008
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2982)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
more dev_w14
A ** RABAX: end no http/smtp
more dev_icm
[Thr 08] Thu Oct 30 23:54:33 2008
[Thr 08] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (
rc=500)- please check node in TA sicf [icxxman_mt.c 2215]
more dev_icfo
<ErrorInfo URL="http://:/sap/public/icman">
<ErrorMessage>Error when initializing the work area SYST.</ErrorMessage>
<Date>20081029</Date>
<Time>154639</Time>
<Client>000</Client>
<User>SAPSYS</User>
<TerminationType>RABAX_STATE</TerminationType>
<ABAP-CallStack>
</ABAP-CallStack>
</ErrorInfo>
Edited by: Jay Elliott on Oct 31, 2008 2:21 PM>ERROR => DpHdlDeadWp: W14 (pid 3018) died http://dpxxdisp.c 14531
the Work process are getting terminated.
can you please paste full log from dev_w0 and dev_disp and std*
>we upgraded the new kernel
why don't you use the same kernel as same as source system?
cheers,
-Sunil -
Selected model does not contain any target value prior
Hi ODM experts,
I have tried to apply the SVM alg in order to find anomalous records.The table source have rows like that:
uniq_rec ID NAME A1 A2 A3 A4 A5 data
577 2052956018 NAMEHDRCP8 2.27 0.4 85.46 0.01 14.54 24-JAN-13
578 1250914484 NAMEDJDRVP3 11.45 1.24 56.24 0.01 43.77 24-JAN-13
579 1968689283 NAMEDKEND12 0.000011 6.78 0.000029 0.01 0.091 24-JAN-13
580 2063389130 NAMEDNMXG14 0.000011 0.65 36.65 0.02 0.091 24-JAN-13
unq_rec is the pk, id is the id for the generic name and A1 .. A5 attributes ,data when collection occur etc
I'm trying to execute the following code:
drop table ALG_SET;
exec dbms_data_mining.drop_model('SVMODEL');
create table ALG_SET (setting_name varchar2(30), setting_value varchar2(4000));
insert into ALG_SET values ('ALGO_NAME','ALGO_SUPPORT_VECTOR_MACHINES');
insert into ALG_SET values ('PREP_AUTO','ON');
commit;
Begin
dbms_data_mining.create_model('SVMODEL', 'CLASSIFICATION', 'ODM_PAR_FIN_HIST', 'UNQ_CRT', null, 'ALG_SET');
end;
The results is the following error:ORA-40104: invalid training data for model build ( if I run the code) .If I run from graphical interface I have obtained this
error code " Selected model does not contain any target value prior"(using the similar model - SVM for anomaly detction plus the same source table )
Please advice what is missing or wrong and if possible how to bypass this issue.
Thanks in advance for support.
Best Regards,
BogdanHere is also a newer example of creating a SVM Anomaly model from ODM sample code (12.1 version but this applies to 11.2):
Rem
Rem $Header: rdbms/demo/dmsvodem.sql /main/6 2012/04/15 16:31:56 xbarr Exp $
Rem
Rem dmsvodem.sql
Rem
Rem Copyright (c) 2004, 2012, Oracle and/or its affiliates.
Rem All rights reserved.
Rem
Rem NAME
Rem dmsvodem.sql - Sample program for the DBMS_DATA_MINING package.
Rem
Rem DESCRIPTION
Rem This script creates an anomaly detection model
Rem for data analysis and outlier identification using the
Rem one-class SVM algorithm
Rem and data in the SH (Sales History)schema in the RDBMS.
Rem
Rem NOTES
Rem
Rem
Rem MODIFIED (MM/DD/YY)
Rem amozes 01/23/12 - updates for 12c
Rem xbarr 01/10/12 - add prediction_details demo
Rem ramkrish 06/14/07 - remove commit after settings
Rem ramkrish 10/25/07 - replace deprecated get_model calls with catalog
Rem queries
Rem ktaylor 07/11/05 - minor edits to comments
Rem jcjeon 01/18/05 - add column format
Rem bmilenov 10/28/04 - bmilenov_oneclass_demo
Rem bmilenov 10/25/04 - Remove dbms_output statements
Rem bmilenov 10/22/04 - Comment revision
Rem bmilenov 10/20/04 - Created
Rem
SET serveroutput ON
SET trimspool ON
SET pages 10000
SET echo ON
-- SAMPLE PROBLEM
-- Given demographics about a set of customers that are known to have
-- an affinity card, 1) find the most atypical members of this group
-- (outlier identification), 2) discover the common demographic
-- characteristics of the most typical customers with affinity card,
-- and 3) compute how typical a given new/hypothetical customer is.
-- DATA
-- The data for this sample is composed from base tables in the SH schema
-- (See Sample Schema Documentation) and presented through a view:
-- mining_data_one_class_v
-- (See dmsh.sql for view definition).
-- BUILD THE MODEL
-- Cleanup old model with the same name (if any)
BEGIN DBMS_DATA_MINING.DROP_MODEL('SVMO_SH_Clas_sample');
EXCEPTION WHEN OTHERS THEN NULL; END;
-- PREPARE DATA
-- Automatic data preparation is used.
-- SPECIFY SETTINGS
-- Cleanup old settings table (if any)
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE svmo_sh_sample_settings';
EXCEPTION WHEN OTHERS THEN
NULL;
END;
-- CREATE AND POPULATE A SETTINGS TABLE
set echo off
CREATE TABLE svmo_sh_sample_settings (
setting_name VARCHAR2(30),
setting_value VARCHAR2(4000));
set echo on
BEGIN
-- Populate settings table
-- SVM needs to be selected explicitly (default classifier: Naive Bayes)
-- Examples of other possible overrides are:
-- select a different rate of outliers in the data (default 0.1)
-- (dbms_data_mining.svms_outlier_rate, ,0.05);
-- select a kernel type (default kernel: selected by the algorithm)
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_linear);
-- (dbms_data_mining.svms_kernel_function, dbms_data_mining.svms_gaussian);
-- turn off active learning (enabled by default)
-- (dbms_data_mining.svms_active_learning, dbms_data_mining.svms_al_disable);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.algo_name, dbms_data_mining.algo_support_vector_machines);
INSERT INTO svmo_sh_sample_settings (setting_name, setting_value) VALUES
(dbms_data_mining.prep_auto, dbms_data_mining.prep_auto_on);
END;
-- CREATE A MODEL
-- Build a new one-class SVM Model
-- Note the NULL sprecification for target column name
BEGIN
DBMS_DATA_MINING.CREATE_MODEL(
model_name => 'SVMO_SH_Clas_sample',
mining_function => dbms_data_mining.classification,
data_table_name => 'mining_data_one_class_v',
case_id_column_name => 'cust_id',
target_column_name => NULL,
settings_table_name => 'svmo_sh_sample_settings');
END;
-- DISPLAY MODEL SETTINGS
column setting_name format a30
column setting_value format a30
SELECT setting_name, setting_value
FROM user_mining_model_settings
WHERE model_name = 'SVMO_SH_CLAS_SAMPLE'
ORDER BY setting_name;
Maybe you are looking for
-
Journal entries in Data Transfer workbench
Hi all When I try to Upload journal entries with debits and credits using data transfer workbench I get an error says Unbalanced transaction. I tried lot of things to change but still no go. can someone guide me with this data migration thanks vinodh
-
Error 48: File or folder not found when using photomerge panorama - imac photoshop elements 10
Any help is appreciated. Followed the photomerge panorama instructions and got error 48: file or folder not found.....line 16 ... using photoshop elements 10 on imac with OSX 10.8.2 Thx
-
FreeHand 8 to pdf fill patterns
When I export a freehand drawing with colored fill patterns to pdf using export or distiller, it looks correct in Acrobat 8 professional and reader, but it doesn't print the fill patterns in color. They come out black & white. I don't wan to use a PS
-
Hi all, I have triggered a chain in system A through RSPC_API_CHAIN_START and the source system of the chain is System B but no jobs are getting triggered in system B?WHY SO? There is no space issue,no RFC connections issue,neither the system is down
-
How to call single vi in multiple windows
i have one single graph accessing data through global variable in a file grpah.vi. Graph runs in a while loop. In my main vi, i have 4 sub panels. pressing respective buttons should display graphs in respective sub panels using graph.vi . I am using