Error /SAPAPO/TSM227 in APO SNP capacity view

I am using APO V5.1.
In an SNP capacity view (copied from SAP standard 9ASNP94 view but modified with some bespoke key figures), I have error /SAPAPO/TSM227 (Key figure not available for selection) when I do the following:
- open the view
- select a resource
- drill down by product (or by dependent objects, by product)
- save
Can anyone advise on the cause and correction of this error?
Thanks...

Hi,
This error is due to missing keyfigure assignments in some aggregtes eg 9AMAPR,9AMALO,9AMALA.So make sure that
you assigned the kefigures to aggregates correctly .
Regards,
Sunitha

Similar Messages

SNP Capacity View: browsing by product

Hi,
I have a question related to the usage of the standard SNP capacity view SNP94(2). What I would like the users to be able to do is:
- select a resource and check the capacity consumption situation
- then drilldown into the products to be able to see which products are loading this resource
I've tried to do this, but it seems it doesn't work, that is, my header has two characteristics: APO resource (which is showing the currently reviewed resource) and APO product; however when I click on APO Product to see the list of underlying product nothing happens.
I had the impression reading I try to load the data in SNP capacity data view i,m getting the error that this is linked to the absence of certain key figures from certain aggregates. Can somebody confirm and maybe indicate a solution?
Best Regards
Jean-Louis

Hi,
First check in //RRP3, whether source assignment and resource name appearing correctly for the order. as such only SNP orders ( with APO application 4 ) will be displayed in data view. if you want to display PPDS orders also you have to modify the aggregates at //MSDP_ADMIN.
In data view after loading the resource you can see the capacity consumption values in TOP grid and order values in Second grid.
If you drill down by Header --> APO product --> capacity consumption values based on the product will appear.
If you click on display dependent objects ( icon ) by product / PPM --> respective orders will appear. After drilldown you can create new order also.
you can select existing order and right click to display order details .
Regards,
Chava

SNP Capacity view - Wrong Capacity consumption

Dear All,
Our client facing this critical issue..
In our scenario we have SNP and PPDS are using for planning, issue is related SNP Capacity view..
PPDS orders (firmed planned order, process orders) are not reflecting properly in SNP Capacity view , issues are we can put it into two category
Category 1
We are running PPDS planning run for 3 week , at every Wednesday , after the PPDS planning run, if you check in PPDS DS board or Resource utilization report, we can see the resource are consumed say 87%, but when we you check the same in SNP Capacity view you may see only 60% or like, from the detailed analysis it came to know that some of the products are reflecting in SNP Capacity view, this is only with PPDS planned order or process orders , SNP planned orders are consumed properly in SNP Capacity view (this analyzed with respect to deployment view, (PPDS order also reflecting properly in Deployment view) ( Production confirmed)) because of this wrong data user not able to take proper decision from SNP Capacity view.
Category 2
Scenario is same as previous one, here some time later (say for example next day) some of the products are reflecting in SNP Capacity view. This occurring randomly.
Can any one guide me , what would be the reason for this
From our end we done following activities
1)analyzed the master data didn't find any issue
2) Constancy check done for LiveCache and Planning area
Thanks in advance
Sunny

Have you recently applied any support packs?

Functionality of APO SNP capacity levelling

I am using APO V5.1 SNP capacity levelling.
When capacity levelling runs on a given resource and tries to move planned orders, does it respect the relevant lot size parameters defined for a product?
Thanks for any advice on this...

Hi,
In APO SNP , Capacity leveling takes into account lot size data that is defined in the master data(Product Master) with following restrictions:
It takes into account fixed lot sizes, maximum lot sizes, and minimum lot sizes.
However, the system does NOT considet period lot sizes or lot sizes from PPMs/PDS.
Further to the above, the capacity leveling method that you choose controls the way in which the system takes into account lot sizes.
If we choose heuristic-based capacity leveling, the system uses the same rules as for the SNP heuristic when taking lot sizes into account; and
if we choose optimization-based capacity leveling, the system uses the same rules as for the SNP optimizer.
Hope this gives you insight.
Regards
Datta

SNP Capacity View - Graph

Hi,
I am doing APO SNP heuristic planning. I have 2 months of weekly buckets and remaining monthly buckets for a 1 year horizon.
When I view the capacity in graphical form (which appears in monthly buckets), the monthly capacity for the first 2 months is appearing as a weekly capacity (1/4 of monthly capacity).
Any one has a solution to this issue?
Also, what do the numbers at the bottom of the chart indicate?
You can view the graph in link below:
http://picasaweb.google.com/v.vaidhya/WorkRelated

the numbers in the bottom indicate the quarter... 1st quarter of 2008 = 1.08
your graph will show what you have as planning buckets in the data view.
try this-
right click on the chart (where these numbers appear) >> choose format axis>> go to Scale tab >> change the options for major and minor axis to weeks
you can also change the way the periods are labelled there

Should PPDS orders consume capacity in the SNP Capacity view in 9ASNP94?

Dear Gurus
Should PPDS orders consume capacity in the Capacity View in 9ASNP94?
We currently only use PPDS, but are looking to implement SNP for mid-range planning and S&OP. I would like to demonstrate the simplicity of the capacity view in SNP, but the planned orders in PPDS do not consume the capacity of the Resource in the standard planning book/view SNP94(2). We are using Single mixed production resources which I thought were suitable for both PPDS and SNP planning. This is a particular concern because I would expect that the SNP and PPDS horizons will have to cross over and so PPDS and SNP will have to take into account the capacity consumed by orders in the other module.
Any help will be appreciated!
Elamobel

If you are using PDS you probably need this BADI:
Note 657185 - RTO: Sample code for calculating bucket consumptions 4.0
As standard only the continuous consumption is maintained in the PDS by the CIF, the bucket consumption (which is the SNP view of capacity) is missing.
Check the related notes too (especially 1462965)
If you are using PPMs you can just maintain the missing data directly

Selecting groups of products in SNP capacity view

In SNP interactive planning, I see that the 'capacity view' is typically showing data by resource.
But if one chooses 'drilldown' in the shuffler, one can see the resource load by individual product.
But is there a way of seeing the resource load for a 'group' of products? I tried using the 'extra fields' on the product master, and using one of these fields as 'product group' I can see in the drilldown the relevant products, but I cannot find a way of seeing the resource laod for this group of products (I can only see the load product by product).
Any ideas on this?

Gaurav,
Thanks for your response on this.
Yes, I can see that I can select one or more products.
But what I really want to do is to be able to select all products belonging to a 'product group', where, for example, the 'product group' for a product is defined on the product master (for example via one of the 'extra' fields). So, rather than having to select products individually, I can select 'product group x', and the system will bring back the data for the proucts in 'product group x'.
Any thoughts on this?

APO SNP capacity levelling heuristic

I am using APO V5 SNP.
I have a question about SNP capacity levelling heuristic.
As I understand it, the heuristic works on a resource by resource basis and will aim to capacity level across time buckets.
But suppose I have a product which has two different sources of supply (PDS/PPM) using different resources X and Y.
Suppose the capacity using resource X is overloaded for week n, but resource Y is not overloaded.
Can the levelling heuristic be used to move capacity from resource X to resource Y for week n, or would this have to be done manually via changing the PDS/PPM?
Thanks,
Bob Austin, Atos Origin

Bob,
You can move the load from X to Y if Y is an alternative resource to X. This can be accomplished by going to the capacity levelling button and then in the options check the box for 'Consider Alternate Resources'. After that you can mention muliple alternate resources also to be considered.
Hope this helps.
Regards,
Abhi

Consumption of storage capacity in in SNP capacity view

Hi Experts,
when I check a storage resource in the capacity view the key figure "Capacity Consumption" (9ACACON) is displayed.
Could anybody please explain how is this key figure calculated?
This does not take place in a macro - I think this is related to the assigned key figure function done in the planning area customizing. The key figure "quantity stored" (9ASTOCK) has the key figure function "6007 Storage Quantity with Resource Consumption". Therefore the amount stored in this key figure (and other key figures with the function 6007 assigned) consumes the capacity.
I want to check capacity consumption of the projected stock in the future which is only calculated in auxiliary key figure u201CStock on Hand (Projected)u201D. This key figure has also function 6007 assigned.
So I assume that
a) the calculation of capacity consumption takes place by the key figure function - How specifically?
b) if I create a new (non auxiliary) key figure where the projected stock is stored in the consumption is correctly calculated?
Looking forward to your answers!
Julian

Hi julian,
let me rephrase what I said above:
When I say:"the capacity consumption for storage capacity is not based on projected stock but on the orders": I mean:
The capacitiy consumption calculation is not based on the proejcted stock key figure.Instead the storage quantity is calculated based on initial stock, receipt AND demand.
This should give the same result, but what I meant is: I don't think that the changes you have done for the projected stock have any impact on the storage capacity consumption.
In you case it looks like the result is based only on receipt as you mentioned, but to be honest even that look wrong (something arriving on day x should consume the storage untill it is removed and send somewhere else, and not only on the date of arrival)
Note the standard data view 9ASNP94/SNP94(2) - the capacity view- does NOT contain the projected stock key figure.
What you want to see is correct: in standard it should work! (except that it is not based on the projected stock key figure itself, but it is recaculated...)
Did you check if the standard view 9ASNP94/SNP94(2) was showing the right result?
I asked you:" How your system behave with other order types (e.g ditribution demand, production...) "
I meant: when you have a distribution demand, is your capacity consumption reduced?
Thanks and Regards
Julien

APO-SNP Planning book BAPI_PBSRVAPS_CHANGEKEYFIGVAL2

Hello experts,
In the BAPI "BAPI_PBSRVAPS_CHANGEKEYFIGVAL" for locking and unlocking the planning area there is an error message "Locking planning area for planning book & has failed" .
This is urgent ,can anybody please help me out why this error message appears.
Thanks in advance.
Sandhya

Hi Srinivas,
Thank you very much for reply
This error is getting in APO SNP. In the BAPI
The FM /sapapo/ts_dm_lock is calling FM Enque_report and if this function module is filling the table "enq" then the locking is failing .
Can you please tell me what this table contains.is this table is filling with the both the users who are trying to edit the keyfigure values.
Thanks and Regards,
Sandhya

Resolution of /SAPAPO/TSM207 errors in APO SNP planning

I am using APO V5.1 connected to a SAP ECC system.
When I CIF across a new product to APO and use it for the first time in SNP interactive planning I get error /SAPAPO/TSM207, because of missing time series objects.
The SAP recommendation in the error help text suggests to either re initialise the planning area, or to use pgm /SAPAPO/TS_LCM_PLOB_DELTA_SYNC. But I can only resolve the problem via the former approach (ie to re initialise the planning area). The use of /SAPAPO/TS_LCM_PLOB_DELTA_SYNC does not resolve the problem.
Is this expected behaviour?
What exactly is /SAPAPO/TS_LCM_PLOB_DELTA_SYNC designed to do?
If I look at help.sap.com for SCM 7 I see mention of a transaction /SAPAPO/TSINIT, which can be used as a 'delta' planning area re initialisation. But I do not see this transaction in APO V5.1 - so is this a new transaction in APO 7?
Thanks for any advice on this...

Hi,
Please refer to he note 402046 which explains this.Eventhough the note validity is not for your release ,but the conent of
note is still valid to all releases.
Regards,
Sunitha

SNP Planning book capacity view -APO Product is blank in drill down

Hi Experts,
I am getting product blank when I am doing Header on/off drill down setting. Even when I am choosing Products from Display dependent objects, It drill down the second grid (Quantity View) and product is blank.
Please let me know if anybody faced the same issue before. We are using version SCM 5.1
Thanks & regards,
Hitesh

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

Error /SAPAPO/TSM 041 when loading from InfoCube to SNP planning area

I am using APO V5.1.
I have a 'backup' InfoCube with characteristics 9ARNAME and 9AVERSION which I'm loading to an SNP planning area via trans /SAPAPO/TSCUBE. The InfoCube is itself populated from the 9ARE aggregate of the SNP planning area.
But I get error /SAPAPO/TSM 041when I run the load, suggesting absence of a required characteristic or navigation attribute in the Cube. Do I need 9ALOCNO for instance?
Can anyone advise me here?...

Hi,
I am not very sure about the 9ARE aggregate (haven't used it in backups), but RTSCUBE is used to copy time Series (TS) KF data from cube to planning area (SNP or DP).
Are you trying to restore some time series data from your backup cube to the planning area? If yes, then do a mapping of characteristic from cube to planning area in RTSCUBE, and also map the TS KF between cube and planning area.
If your KF is not a time series KF, then you can't copy it from cube to planning area. You could get data to cube for some reporting, otherwise I am not sure what use the backup is for you. For SNP, most of the data would be received from R/3, so there's not much point in having a backup.
Hope this helps.
Thanks - Pawan

Table name and BAPI to view/modify APO Resource capacity profile data

Please advise the table where the data of APO resource capacity profile stores and BAPI which help to extract and modify the break duration and utlization rate for a resource.
Steps to view APO resource capacity data
1. Use transaction /SAPAPO/RES01 and enter as below
Resource <Resource Name>
Location XXXX
Planning Version 000
2. On the display screen, click button "Capacity Profile" to view the
data of start, end, break duration and utilizaiton %.
Appreciate your help!!

Hi Kurt,
You can use the below tables/views in which Resource and Capacity Profile related data is stored.
Tables:
/SAPAPO/RES_INTQ - Resource Capacity Intervals
/SAPAPO/RES_INTV - Resource Capacity Intervals
/SAPAPO/RESCAP - Capacity Profile: Resource Time Capacity
/SAPAPO/RESDIM - Dimensions and Capacity of a Resource
/SAPAPO/RESDOWN - Resource Downtime
/SAPAPO/RESDOWNT - Resource Downtime
/SAPAPO/RESKEY - Reset Key for Resource to UID
Views:
/SAPAPO/V_RESVER- Resource Capacity Variants
/SAPAPO/VRESINTQ - Resource Interval of Available Capacity Quantity Model
/SAPAPO/VRESINTR - Resource Interval of Available Capacity Rate Model
BAPIs available to read:
BAPI_RSSRVAPS_GETCAPAPRO - Read Resource Capacities Profile
BAPI_RSSRVAPS_REQUESTCAPAPRO - Query: Selection of Capacities for Resource and Result Transfer
BAPI_RSSRVAPS_GETLIST - Selection of Resources
I hope this will help you to get the data which you want to read.
Regards,
Saurabh

How we can define storage capacity constraint for SAP APO SNP(trading company)

Hi
can any one advise how we can define storage capacity constraint in SAP APO SNP.Typically businesss scenario its a trading company sources from different sources and deliver to the distribution centres,its typically sourcing optimization using SNP optimizer.How we can define capacity constraint for a source?
Thanks

Hello Poorna
I suggest you to refer this thread which will be helpful.
Storage capacity as hard constraint in SNP optimizer
and this is one very informative document too.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b004ab38-d73f-2d10-9d86-81f014034235?overridelayout=t…
Hope this will help
Thank you
Satish Waghmare

Error /SAPAPO/TSM227 in APO SNP capacity view

Similar Messages

Maybe you are looking for