Error saying that windows failed to start 0xc000014c on my toshiba satellite A210

On my Laptop, a Toshiba A210, I get an error saying that windows failed to start. File:\boot\bcd status: 0xc000014c. i already put in a windows recovery disc and it still came up with this message. I removed the HDD and restarted the laptop, and it brang up windows install but it cancels that out before the install starts, even if i stick the HDD in after start-up.
Can anyone help me with this issue please?

Which A210? Which Windows? Which service-pack level?
Maybe you are resuming from hibernation? Press and hold the power-on button until the computer shuts off to get out of this state.
Maybe you have Windows Vista?
Error message when you resume a Windows Vista Service Pack 1-based or Windows Server 2008-based comp...
-Jerry

Similar Messages

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376 it takes you through the process. WARNING - it takes a little time!
Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot again!
Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
Reboot!
Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

HT1386 I am getting an error message that syncing failed to start. Any ideas why?

I am getting an error message that syncing failed to start. Any ideas why. The ipad is working fine.

Then I tried to download and install them again but it kept saying the old itunes could not be removed.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

I get an error message that sync failed to start

When I try to sync my Ipod Touch it shows that it is waiting to sync but then I get an error message that sync failed to start. I have tried restore and re starting my computer but I still get the same message, what is going on and how do I fix it? Please help!

Quit iTunes, restart your computer, restart your iPad and try again. If it doesn't work with a restart of the iPad, try a reset of the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?

its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?

http://support.apple.com/kb/TS1567

My Ipod would not sync to the itunes at all, Help? Itunes shows waiting for sync to start. then get a message saying that it failed to start. I restored the ipod but the problem still occured.

I have already updated all my itunes software and everything else.
recently, when I connect my ipod itouch to my itunes, it shows waiting for sync to start.
Then a message saying that it failed to start.
I have restored my itouch but it still fails to sync.
Any suggestions how to resolve it?

Se if this previous discussion helps:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities

HT1296 my iphone 4 will not sync with my new mac book air. It says that syncing failed to start. Any suggestions?

My iphone 4 will not sync with my new macbook air. It says that syncing refused to start. Any suggestions? FYI - all my apps and software are updated.
Thanks,
Jodi

Close iTunes. On your phone, double tap the Home button to bring up the multi-tasking bar, tap & hold any app until they all start to wiggle & a red minus sign appears. Tap the red minus sign to remove every app shown. Tap Home button when finished. Re-start your Mac, launch iTunes, connect your phone. See if things work now.

When I try to start Apple Mobile Device service, I get an error saying that it didn't start within a timely fashion. How do I get it to work?

My computer recognizes my ipod, itunes doesn't because of the apple mobile device service not being started. I do everything apple tells me to do on how to fix it, it works until i get an error saying "The service did not respond to the start or control request in a timely fashion." How do I get it to work?

My computer recognizes my ipod, itunes doesn't because of the apple mobile device service not being started. I do everything apple tells me to do on how to fix it, it works until i get an error saying "The service did not respond to the start or control request in a timely fashion." How do I get it to work?

Boot Up Error 0xc0000034 - windows failed to start

I came back from work yesterday and found my laptop displaying a black screen saying that "windows failed to start. A recent hardware or software change might be the cause" and to repair using the windows 7 installation disc.
However windows was pre-installed on my machine so i dont have a disc. I left it on during the day so i can only assume it restarted due to an auto update.
I only got this computer the other day and i really dont need this hassle.
Any ideas??
Ta

> However windows was pre-installed on my machine so i dont have a disc.
You didnt receive any disks because there was preinstalled software called Toshiba Recovery Disk creator.
This allows you to create recovery disk which would help to restore the OS.
But usually there should be a HDD recovery option too.
Try this:
Press F8, choose Repair my Computer, HDD recovery.
If this will not help, then you will need the recovery disk. You can order this here:
https://backupmedia.toshiba.eu/landing.aspx

Need help: windows failed to start

I keep getting a message that Windows failed to start: a recent hardware or software.....
then it gives me the option of windows recovery, or to start normally.
I have not had ANY problems with my laptop until yesterday when I got a new internet provider! Please help...my laptop is still under warranty (until Sept) but I really need to use it. school starts next week!

Which computer?
Turn it on and immediately press and hold the F8 key.
Can you reach the Advanced Boot Options menu?
-Jerry

When I try to sync my Ipad Mini, I get an error message that says "sync session failed to start". Anyone ever deal with this?

When I try to sync my Ipad Mini, I get an error message that says "sync session failed to start". Anyone ever deal with this?

Quit iTunes, restart your computer, restart your iPad and try again. If it doesn't work with a restart of the iPad, try a reset of the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Windows failed to start error

Windows failed to start error
I am running a Compaq mini 110c netbook and the following error message occurred on start up. The netbook does not have a slot for a disc as everything was in the netbook already. I am a complete technophobe and need help to restart my netbook.
windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows instalation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
Status: 0xc000014c
File: \Boot \ BCD
Status: 0xc000014c
Info: An error occurred while attempting to read the boot configuration data.
Help please!!! Answers must be in plain everyday language that I can understand!!!

The following 2 links should help with the issues you are having. I would suggest attempting a system restore first (not I repeat not a system recovery) make sure you are doing the restore option or you will lose everything.
Click the option to "Using System Restore when Windows 7 cannot start normally"
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01835735&lc=en&cc=us&dlc=en
The below link is for other basic troubleshooting that might help if the above doesn't work:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Hopefully the steps are basic enough for you to understand and help out. Thanks
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

After restore windows boot manager says windows failed to start. CQ57 notebook

Had a problem with the FBI scareware. Took it to a cmputer repair place. They wanted $250 to fix it and now it won't boot up at all. It did the HP system restore but when it rebooted the Windows Boot Manager says "Windows failed to start". It wants an installation disc. THen :
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot configuration data.
Is it trying to boot from the wrong partition?

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
If you haven't burned a Recovery Disk set, phone HP to order one.Usually around $17. Choose your country here>> Contact HP
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

F11 Recovery don`t work - error Windows failed to start

After downloading MS updates don`t work administrator password. I try F11 Recovery and see black screen: windows failed to start. A recent hardware or software change might be the cause ...
File: \windows\system32\winload.efi
status: 0x0000001
Info: The application or operating system couldn't be loaded because a required is missing or contains errors.
?Any ideas?
This question was solved.
View Solution.

1) Maybe I misunderstood something, but I thought that the function f11 restores preinstalled Windows from the hidden partition on the disk.
2) I created a boot disk with Windows 8 Pro on USB and tried to boot from it through Boot manager. Beyond the first installation screen did not go.
3) As for your advice to contact the dealer, so I did yesterday. The tablet was taken away for examination by 20 days...
It's very sad, it was a gift to my father for Christmas.
I work for a long time as the system administrator and am dealing with HP servers. It is a pity that such a reputable company can not provide the quality of their tablets.
I advised my daughter Windows tablet, but she wished to have iPad. Now I see that she was right - a year she has no problems with it. Windows tablet - this is not the best choice for a child or an old man.

Error saying that windows failed to start 0xc000014c on my toshiba satellite A210

Similar Messages

Maybe you are looking for