Error: Select a Location for the chosen compnay code

Hello Guru's,
We have an issue . Shopping caart at the time of approval (Business approval) we get the error message :" Select a Location for the chosen company code".
We checked in PPOMA_BBP for the approver (in extended attributes the relevant plant was not assigned. Hence had assigned the plant to the user attributes. But unable to approve. Still get the same error message.
Also had checked the attributes of all the approvers of the shopping cart . They all are assigned to the relevant plant.
Below are the questions i have :
1) Is it possible to debug the shoipping cart which is in awaiting approval status.
2) We checekd in SE91for the error message and found the message but not able to see where it is used and no additional details.
IS there any way to check this error andd fix
Best Regards,
Shree

Hi Shree,
Does this happen to all the locations?
Have you ensured that the Plant chosen in the shopping cart belongs to the Company Code in the Shopping cart and that the Company Code is assigned to the user and the approver in PPOSA_BBP?
Regards,
Yateesh

Similar Messages

How to handle "Validation failed for the field - Tax code" issue?

We had mass uplaod the order that create on Mar with tax code effective date on Apr. Now we would like return on this order and getting error of "Validation failed for the field - Tax code". How to handle this issue?

Hi
You will have to check if the Tax_Code of RMA being received is the same as the one in the related sales order.
If not you will need to use the same tax_code.
Refer below document : Doc ID 1584338.1

I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL

Dear,
I CAN SEE ALL SHIP TO LOCATIONS FOR THE CUSTOMER EVEN IF I SELECT ONE BILL TO
Steps:
Create customer name "customer 1"
Under this customer, I create 2 new address
"Customer A " with tow business purpose
1-bill to –> customer A
2- ship to-> customer A after that I link ship to with bill to customer A , I CHECK THE PRIMARY SITE CHECK BOX
FOR THIS SITE
"Customer B" with tow business purpose
1-bill to –> customer B
2- ship to-> customer B after that I link ship to with bill to customer B
Now when I navigate to (N) Order management ->order organizer ->new order
I select the "customer 1" from customer field name I tab to other field bill to
location it is coming by default as primary site customer "customer A"
I OPEN THE LIST I SEE tow customer A AND B I SELECT 'B' AS bill to
When I tab to the other ship to field in also I can see the tow customer " A" and "B" but in real
setup I link the customer "B" WITH ONE SHIP TO ALSO CUSTOMER"B" WHY I CAN SEE
ALL LOCATION FOR THE CUSTOMER EVEN IF I SELECT THE ONE BILL TO .
WHAT THE BENIFIT FROM LINK CUSTOMER SHIP TO FIELD WITH BILL TO IF I CAN SEE ALL LISTS
FOR CUSTOMER SITE
Expected Behavior:
Once I link the ship to location with bill to location I must see when create sales order only the ship to location
link with the specific bill to already specified
Business impact:
This give the user entry ability to enter wrong data or give him the confusion any site I must enter
thanks

That is expected behavior.
You can see the all addresses of account in the list as long as the purpose condition is satisfied. Linking is only for defaulting and not for controlling. If you do not want to see you can create a different account for the B address.
Thanks
Nagamohan

Error - no elements exist for the selection - RSMIPROACT

Hi Experts,
We have an issue with the program RSMIPROACT to send requirement to SNC. We have an error "No elements exist for the selection" once execute the program with input parameters.
Could you please help me out if anything missing or cause of the error.
Regards
Gowri Sankar

Hi Gowri,
if the MRP areas are inactive, note 1627486 could help, please verify...
Regards,
Mauro

Error :Maintain pricing conditions for the material for the excise invoice

Hi
i have maintained excise data for material, after that i have created scheduled agreement with lp and with 0 value private and dummy tax code and delivery schedule is released. Now when i do the goods receipt i am getting error " Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629" can some body can help me.
with regards
Narendra kumar

Hi,
goto tcode fv11 u have to maintained the condition.
first enter the condition type like jmop -
then enter, next screen u have the select the below comination.
select the plant/vendor/material base u have to maintain the conditions.
Thank's
MVS

HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this?

When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this? My external hard drive is a FreeAgent GoFlex Drive.

Hi, what Format is the external Drive?
They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html

SEVERE: An error occured while scanning for the next trigger to fire

Hi All,
I followed below steps to configure Oracle BI publisher scheduler on oracle 10g database.
1.Log in to BI Publisher as a user with Administrator privileges and select the Admin tab.
2.Under System Maintenance, select Scheduler Configuration.
3.Enter the database connection information for the target Oracle database and user.
Database Type: 10g
Connection String: jdbc:oracle:thin://<hostname>:<port#>:<oracle SID>
Username/Password for the database user
Database Driver Class: oracle.jdbc.driver.OracleDriver
4.Click the Test Connection button to make sure the connection information is valid.
5.Click the Install Schema button to install the scheduler tables.
6.Restart the BI Publisher application.
The Schema installed successfully.
But when I am starting the weblogic server I am getting below error and BI publisher application is not getting up.
INFO: Handling 6 triggers that missed their scheduled fire-time.
23-Dec-2011 05:29:38 org.quartz.core.ErrorLogger schedulerError
SEVERE: An error occured while scanning for the next trigger to fire.
org.quartz.JobPersistenceException: Couldn't acquire next trigger: Couldn't retrieve trigger: Invalid column name [See nested exception: org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1773)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
org.quartz.JobPersistenceException: Couldn't retrieve trigger: Invalid column name [See nested exception: java.sql.SQLException: Invalid column name]
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1126)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: Invalid column name
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:199)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:263)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:271)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:445)
at oracle.jdbc.driver.OracleStatement.getColumnIndex(OracleStatement.java:3372)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:2009)
at oracle.jdbc.driver.OracleResultSet.getBinaryStream(OracleResultSet.java:668)
at org.apache.commons.dbcp.DelegatingResultSet.getBinaryStream(DelegatingResultSet.java:233)
at org.quartz.impl.jdbcjobstore.oracle.OracleDelegate.getObjectFromBlob(OracleDelegate.java:154)
at org.quartz.impl.jdbcjobstore.StdJDBCDelegate.selectTrigger(StdJDBCDelegate.java:2382)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.retrieveTrigger(JobStoreSupport.java:1115)
at org.quartz.impl.jdbcjobstore.JobStoreSupport.acquireNextTrigger(JobStoreSupport.java:1759)
at org.quartz.impl.jdbcjobstore.JobStoreTX.acquireNextTrigger(JobStoreTX.java:1176)
at org.quartz.core.QuartzSchedulerThread.run(QuartzSchedulerThread.java:233)
23-Dec-2011 05:30:55 org.quartz.core.ErrorLogger schedulerError
The system details are as below :
BI Publisher version : 10.1.3.4
Oracle DB : 10 G
Weblogic server :10.3.2
Please suggest to resolve this issue.
Thanks,
Sachin

Hi,
This errors occurs if you have configured some schema for the scheduler and configured it on BIP, but the configured schema is no longer available.
That is why I am suggesting you to replace the current quartz.properties file with the original file that exits during installation.
Then try to start the server, and see if the server starts without error.
After that you can try to configure the scheduler from BIP console.
thanks,
sandeep

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) The user name or password is incorrect

I am able to run the report fine in BIDS in the preview window, and it deployes fine. When it goes to view the report in the browser, I get the following error. There is no domain, I am using a standalone computer with SQL Server and SSRS on
this one machine.
Can anyone point to where I might configure the permission it is looking for? thanks! Steven
The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect
Steven DeSalvo

Hi StevenDE2012,
Based on the error message "The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)", it seems that the Unattended Execution Account settings in Reporting Services
Configuration is not correct.
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. Unattended report processing refers to any report execution process that is triggered by an event rather than
a user request. The report server uses the unattended report processing account to log on to the computer that hosts the external data source. This account is necessary because the credentials of the Report Server service account are never used to connect
to other computers. To configure the account, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
In addition, please verify you have access to the Report Server database by following steps:
Go to SQL Server Reporting Services Configuration Manager, make sure the configuration is correct.
Go to Database, Verify that you can connect to the database.
Make sure you are granted public and RSExecRole roles.
Reference:
Configure the Unattended Execution Account
Configure a Report Server Database Connection
If the problem is unresolved, i would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu

Library Update rqstd on Aperture 3.2; now won't open get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary" TIme machine won't load backup "error code -8003"

Aperture working on OS 10.6.8 then Library Update rqstd on Aperture 3.2; said yes;
now Aperture won't open, get msg "error opening data base for the library "~/Pictures/Aperture Library.aplibrary"
TIme machine won't load backup "error code -8003"
Tried reloading Aperture 3.2 but get same result.

You’re running an outdated copy of Safari on your Desktop. That won’t work.
In the Finder, select
Go ▹ Applications
from the menu bar, or press the key combination shift-command-A to open the Applications folder. Check that the Safari application is in that folder. If it is, use it, and delete the copy on your Desktop. Never move or copy built-in applications.
If you've deleted Safari from the Applications folder, back up all data, then reinstall OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

Two selection option-variables for the same object

Hi,
I'm using two selection-option variables for the same characteristic in my query:
One is authorization variable and the other is used for restrictions (filter) in a selection screen.
I get an error: SELOPT/Query variable .... does not allow any further selections.
If a selection option-variable is used, no additional selections can be specified for this characteristic in this element.
Is there a way to overcome this problem?
Thanks,
Hagit

Hi,
I have solved the problem by changing the authorization object (in RSECADMIN) from range to single value and also the variable in BEx from selection single value.
To be more clear:
object in RSECADMIN was: infoobject BT var1 - var5
I have changed it to:
infoobject EQ var1
infoobject EQ var2
infoobject EQ var3
infoobject EQ var4
infoobject EQ var5
Hope this helps.
Hagit

Error messages or information for the invalidation of those procedures

Hello expert:
I have a few procedure invalidated . in principle , those procedures should be validated automatically when they are called somewhere. but they don't, that means there are some error blocking them validated. please where I can find out corresponding error messages or information for the invalidation of those procedures.
Many Thanks.

CREATE TABLE t
AS
   SELECT 1 id FROM DUAL;
CREATE OR REPLACE PROCEDURE my_procedure
AS
   v_id   t.id%TYPE;
BEGIN
   SELECT id INTO v_id FROM t;
END;
CREATE OR REPLACE PROCEDURE my_proc2
AS
BEGIN
   my_procedure;
END;
exec my_proc2;
DROP TABLE t;
ALTER PROCEDURE   dsamstrc.my_proc2
   COMPILE;
SELECT *
FROM SYS.USER_ERRORS
WHERE NAME = 'MY_PROC2'
       OR NAME IN (SELECT REFERENCED_NAME
                     FROM dba_dependencies
                    WHERE NAME = 'MY_PROC2');
NAME     TYPE     SEQUENCE     LINE     POSITION     TEXT     ATTRIBUTE     MESSAGE_NUMBER
MY_PROCEDURE     PROCEDURE     4     4     2     PL/SQL: SQL Statement ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     3     4     27     PL/SQL: ORA-00942: table or view does not exist     ERROR     0
MY_PROCEDURE     PROCEDURE     2     2     10     PL/SQL: Item ignored     ERROR     0
MY_PROCEDURE     PROCEDURE     1     2     10     PLS-00201: identifier 'T.ID' must be declared     ERROR     201
MY_PROC2     PROCEDURE     2     3     5     PL/SQL: Statement ignored     ERROR     0
MY_PROC2     PROCEDURE     1     3     5     PLS-00905: object DSAMSTRC.MY_PROCEDURE is invalid     ERROR     905wonder if something like this would work if the dependencies were more than 2 deep.
SELECT distinct *
FROM SYS.USER_ERRORS
WHERE NAME in
       (SELECT name
        FROM dba_dependencies
connect by nocycle name = prior referenced_name
start with NAME = 'MY_PROC2')
order by name;Edited by: pollywog on Apr 4, 2011 2:49 PM

Firefox.exe-application error: Found 0 results for the instruction at "0x00b48d37" reference memory at "0x00bd37". the memory could not be "read".

my firefox does not work because of this error.
firefox.exe-application error: Found 0 results for the instruction at "0x00b48d37" reference memory at "0x00bd37". the memory could not be "read".

Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Uninstall your current Firefox version if possible.
*Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
See also:
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time.

I've lost a load of notes, but dont know why or how to get them back. I cant find the folder that is in my Yahoo account that people have suggested might be the location for the messages. I recently signed into iCloud for the first time. Any idea how to get the notes back? I really dont want to lose them.

It should keep asking for the password, because it's trying to check for purchases... As soon as you login, it will see you have pending downloads and create the downloads section on the left below Purchases under the Store section. Then it will start the music downloads there, as they will be listed one below the other.
You could just try to check your account balance or view your account and that will trigger a password request too. You can just click on that and say that now iTunes keeps asking for the password and ask him to help you with that. Trick would be to interrupt him so that he carries on with another task after, so he doesn't notice the download. Or you carry on with email or browsing which you were "busy" with when iTunes interrupted you for the password (stupid iTunes)

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

Error: Select a Location for the chosen compnay code

Similar Messages

Maybe you are looking for