Error: Select at least one user or group for provisioning

Hi all,
In Hypeion shared services, I haved choosen User for provision but it show error "Select at least one user or group for provisioning". I don't know why, plx help me.
Thanks.

When you say you have chosen a user, did you highlight the user in the left box then click the arrow to move that user to the right box?
What step are you at? What system and what version are you on?
Are you selecting a user to provision roles? Are you selecting users in an application to provision security classes?

Similar Messages

  • Problem with MySQL - WLS61:General error: select command denied to user: 'foo@lion.e-pmsi.fr' for table 'finess'

    Hi
    I've been trying to adapt and deploy an enterprise appliaction developped and deployed
    before under JBoss.
    My database is MySQL and I use Together Control Center for development and hot deployment.
    After having modified a lot of things (the seamless protability seems always sor
    far :), now I get some strange error when deploying from withing Together Control
    Center 6.0:
    WLS61:General error: select command denied to user: '[email protected]' for table
    'finess'
    Off course the user foo has all possible and imaginable rights.
    Does anybody have an idea on how to get around it ?
    Thanks
    Alireza

    Found the answer... email that went to junk mail. Hope this helps others!
    Hello Subscription User,
     Thanks for choosing ClearDB for your database needs. We appreciate your business and 
     your interest in our services. Our commitment to all of our customers is that we 
     provide a high quality of service on all of our database systems. Part of that 
     commitment includes the enforcement of database size quotas in order to ensure 
     the highest quality of service for our customers.
     As such, we're sending you this automated message regarding one of your databases:
     Database: wp____
     Tier/Plan: Mercury
     Tier size quota: 20 MB
     This database has either reached or has exceeded its maximum allowed size for the 
     'Mercury' plan/tier that it currently belongs to. As such, our systems were forced to 
     place a read-only lock on it. We kindly encourage you to upgrade your database 
     to a larger tier/plan so that we can restore write privileges and enable complete 
     access to it from your account.
     If you feel that you have received this notification in error, please feel free 
     to contact us by replying to this email along with information that you feel may 
     assist us in assessing the situation with your database.
     Thanks again for choosing ClearDB,
     The ClearDB Team

  • How can I have multiple-selection list box "select at least one checkbox" option active only when the section it's in is visible?

    Hi, I'm using SP13 and InfoPath2013.
    I created a custom form and published it to SP13 document library.  This form has many MSLB.  Depending on the checkboxes selected in the 1st MSLB, the other MSLB will either hide or show.  Each MSLB is in its own section.  The requirement
    is to have each MSLB to have at least one checkbox selected.  Well, the problem is that when that MSLB isnot checked in the 1st MSLB it is not visible and shouldn't require any checkbox to be selected.  However, the form can't get submitted instead
    an error dialog would pop up and ask user to make a selection for MSLB that is not even displayed.  Is there any way to fix this besides unchecking all MSLB to be not required at least one selection?  Thank you.

    Eric, 
    I follow your reply post here and still doesn't work.  I also noticed your screen shot of selecting a field is not the same as what I see in InfoPath 2013.  
    Here is what I did, 
    1.Check At least one selection required for
    these Multiple-selection List Boxes
    as you want .
    2.Create a Formatting  rule for the 2nd
    Multiple-selection List Box.
    3.Add a  Condition as below:
    4.  I get a validation error if I don't
    select at least one checkbox in the hidden MSLB control when submitting.
    I think I'm following all the steps correctly
    but please let me know if I'm not.

  • Exception : DI Error: (-5002) At least one amount is required in document rows

    Trying to create a MaterialRevaulation object. doesn't matter what I am using I can getting this error message "Exception : DI Error: (-5002) At least one amount is required in document rows"
    Formate of payload looks like 
    <Payload Role="X" id="atom1">
    - <MaterialRevaluation xmlns=""> 
    - <row> 
    <RevalType>P</RevalType>  
    <DocDate>20140701</DocDate>  
    <JournalMemo>Inventory Revaluation</JournalMemo>  
    <InflationRevaluation>tNO</InflationRevaluation>  
    </row>
    </MaterialRevaluation>
    - <MaterialRevulation_Lines xmlns=""> 
    - <row> 
    <LineNum>0</LineNum>  
    <ItemCode>Item1</ItemCode>  
    <WarehouseCode>WH1</WarehouseCode>  
    <Price>14.973030</Price>  
    </row>
    - <row> 
    <LineNum>1</LineNum>  
    <ItemCode>Item2</ItemCode>  
    <WarehouseCode>WH1</WarehouseCode>  
    <Price>15.973030</Price>  
    </row>
    - <row> 
    <LineNum>2</LineNum>  
    <ItemCode>Item3</ItemCode>  
    <WarehouseCode>WH1</WarehouseCode>  
    <Price>13.973030</Price>  
    </row>
    </MaterialRevulation_Lines>
    </Payload>
    And my SBO object call looks like this
    <Payload Role="C" id="atom2" system="0010000102" status="success" b1login="Technical User" method="Synchronous Insert with fallback to Update" objectid="162" payload="atom1" keyname="" keyvalue="" DIresult="failure" DImsg="Exception : DI Error: (-5002) At least one amount is required in document rows" />
    I don't think I need to put anything in KeyName or Keyvalue. Since I am insert.
    But it looks like it is not even look at the XML changes. I have tried to with no change
    1. Add BOM/BO admin structure
    2. Rouding price difference (from 0 decimla ot 6)
    3. Put in Quantity
    4. Add LineNum
    5.Change Item
    6.Change WHS
    Running out of ideas!! Any help will be appreciated. Thank You!

    Successful format looks like this
    Strange enough, and I still don't know why. Certain item in combination give me the error message. If I break it out to individual document. Then it give me the proper error message. But if it bundled with number of item together then it become this at least one amount is needed at document row error message.
    <BOM xmlns="">
    <BO>
    <AdmInfo>
    <Object>162</Object>
    <Version>2</Version>
    </AdmInfo>
    <MaterialRevaluation>
    <row>
    <DocDate>20140702</DocDate>
    <RevalType>P</RevalType>
    </row>
    </MaterialRevaluation>
    <MaterialRevaluation_lines>
    <row>
    <ItemCode>ITEM1</ItemCode>
    <WarehouseCode>WH1</WarehouseCode>
    <Price>14.587</Price>
    </row>
    </MaterialRevaluation_lines>
    </BO>
    </BOM>

  • Purchase Order Response Error : "Enter at least one item"

    Hi there,
    While trying to confirm a PO response in SRM 7 I am getting the following error:
    "Enter at least one item"
    But when I do a check on the PO response it says:
    Purchase order response - 0030000035 is correct 
    Any ideas what could cause this error?
    Thanks for the help
    Lynton

    Hi there,
    I have no idea what you are asking with the limit po?
    Lynton

  • Error log 'At least one entry could not be found in object buffer' in SLG1

    Hi Experts,
    We are getting error log 'At least one entry could not be found in object buffer' in SLG1 transaction.
    Unable to trace the source of error. Could you please help us identifying the same.
    Regards,
    Santosh Kacham

    Hello,
    the reason could be the use of order_save badi, mostly there is a wrong + faulty implementation which causes this error. Please check first if any own coding part is involved, when creating documents / tickets.
    Thanks + regarsd
    Rene

  • Validation for select at least one

    Hi,
    I have a table which is sortable and selectable, now I want to put select at least one row for any action. As these checkboxes are dynamically coming, I can't get the handle for them. How to go about this please help.
    IDMNovice

    You need to write a java script action in "selectAll" radio box filed like "onChange" or "onClick"
    --sFred                                                                                                                                                                                                                       

  • Airplay works for one user but not for another on the same machine

    I have the problem where airplay works for one user but not for another and both users are on the same machine.  For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted.  I have tried restarting the Airport express, restarting iTunes, repairing disk permissions.  Any ideas about what can be done to resolve this?

    my /etc/group:
    root::0:root
    bin::1:root,bin,daemon
    daemon::2:root,bin,daemon
    sys::3:root,bin
    adm::4:root,daemon
    tty::5:
    disk::6:root
    lp::7:daemon
    mem::8:
    kmem::9:
    wheel::10:root,hans,ibm,gast
    ftp::11:
    mail::12:
    uucp:x:14:
    log::19:root
    locate:x:21:
    smmsp::25:
    http::33:
    games::50:
    network:x:90:
    video:x:91:
    audio::92:ibm,gast
    optical::93:hal
    floppy:x:94:hal
    storage:x:95:hal
    scanner:x:96:
    power:x:98:
    nobody::99:
    users::100:gast
    dbus:x:81:
    hans:x:1001:
    vboxusers:x:108:hans
    policykit:x:1002:
    hal:x:82:
    kvm:x:78:
    nx:x:85:nx
    avahi:x:84:
    camera:x:97:
    gdm:x:1003:
    gast:x:1004:

  • SC Template error: "Enter at least one item or one limit"

    Hi,
    When creating a Purchase Order,based in a Shopping Cart Template, when we add the item to the Purchase Order, we are getting this error that does not permit to continue:"Enter at least one item or one limit". This error looks a mistake, as we are only trying to transfer an item.
    Sounds familiar?
    We are using SRM v5.0.
    Thanks,
    Maria

    Issue solved with the following Notes Implementation:
    Notes: 1054481; 1054487; 1179589 ; 1381642 and 1435295

  • DNS error - "requires at least one Nameserver"

    Hi,
    I have a working Snow Leopard  10.6.8 server - working in all respects except DNS.
    I decided to take the advice of posters on this site and turn off dns and re-enter it from scratch.
    I was able to delete all of the settings on the Zones tab, EXCEPT for the primary zone.
    When I delete it it just re-appears by itself !
    I then try to enter the data that is correct for the name server by clicking the + button under Nameservers.
    When I enter the correct data and click OK, it says "Some configuration data is invalid: The zone..... requires at least one Nameserver" !
    Well... I'm trying to enter exactly that!
    Anyone have any clues how to fix this?

    I saw similar behavior recently on one server I was working on.   (This was with the 10.6.7 and associated server tools; haven't been down this path with 10.6.8 and the updated server tools.)
    If what I saw is similar to what you're seeing here, then try this...
    First, if you don't have a recent backup copy of your boot disk that you trust and are willing to use, then back up your boot disk before you proceed by booting a distribution disk and using Disk Utility to make a full copy of your boot disk to external storage.   This backup is your path back to operations if Badness Happens.
    Once you have rebooted your system from your backup, stop DNS services and exit Server Admin, if either or both are running.
    Then launch Terminal.app, and navigate into and delete or rename the Server Admin properties list file:
    ~/Library/Preferences/com.apple.ServerAdmin.plist
    Then relaunch Server Admin, and you should be able to fix your DNS services.
    This is your local copy of the preferences file for Server Admin, not a system-wide preferences.
    The "immutable" DNS settings were (after digging around) being recovered from the plist file.  (I've also had rare occasion to edit that plist file, when things go Really Wonky, and to change the immutable settings to some other temporary domain name, which then let me Get On With It All with the intended domain name.)

  • Reprot doesnt run for just one user works fine for others

    hi guys
    i am having a weird issue. we have one user who cant run a workbook everyone else can. She has security to it, but this is the first time she had tried runnign this workbook.
    there are some plants selected in the menu when we remove those plants than the report runs fine. so i am guessing it has something to do with those plants. but as mentioned ealrier she has security to them.
    the msg she gets instantly is "No Applicable Data" . if its was a auth issue she would get a diff error. This is BW3.5 front end.
    Does it have anything to do with the Personalized setting options. becasue when she run the query some plants show up by default in thye sel menu. but not he ones that she is having the issue with.
    any ideas appreciated.
    Thx

    it can be personalization or  saved variants
    when she run and u see the variable screen execute it and then in next window right click and hit delete personalisation
    now if this doesnot solve then when u see variable screen try to see if she didnt save any variants
    by accident
    delete those variants

  • Report visible for one user but not for other user

    Hi all,
    We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
    I need quick responses.
    Thanks in advance,
    Sananda

    Hi Sananda,
    Just assign the saem roles as the other user who can view ..
    You can inform the Auth/basis team and they shud be able to do this..
    The T Code is RSECADMIN>user  Tab>Assignment>user.Display and BView the roles here..
    or goto SU01 and check for the Roles Tab.....
    The New user must have the same roles as that of the other..
    Rgds
    SVU123
    Edited by: svu123 on Sep 22, 2010 7:14 AM

  • How do we fetch the top-level users and groups for a particular resource

    Hi Experts,
    I need to fetch the top level users and groups (permissions) for a particular resource, Currently i am able to fetch the effective users list.
    Thanks.

    To elaborate...
    Here we need the users and groups who have direct access to the resource. We dont want to resolve groups.
    Please help us with the apis to use in our java code to fetch the users and groups.

  • Safari won't open for one user but does for other

    I have 2 users on my mac. Out of nowhere, the Safari application will not open when I am logged in but works fine with my other user (where I am currently writing from). When I'm logged in, it hangs but the application never opens...just the searching colored ball over the application headings at the top making have to force quit to do anything else. I have the most recent version of everything and haven't even updated or installed anything within the last week. Just stopped working. I've read many different suggestions about removing plug ins and other files from various libraries. I do not have the Leopard install disks to try re-installing as it was installed at the genius bar for me as my DVD drive does not read any install disks. I'm at a total loss. How can it work with one user and not another--it's the same computer...Thanks.

    OK--So I kept searching through all the discussions for other possible solutions....each time removing some file and putting it on my desktop and trying again. Well something worked. I have the following folders now on my desktop that were removed
    Hard drive > Users > Your username > Library > Safari > Downloads.plist
    Hard drive > Users > Your username > Library > Safari > History.plist
    Hard drive > Users > Your username > Library > Safari > formvalues
    Hard drive > Users > Your username > Library > Preferences > com.apple.Safari.plist
    Hard drive > Users > Your username > Library > Cookies > cookies.plist
    Hard drive > Library > InputManagers
    Hard drive > Users > Your Username > Library > InputManagers
    Hard drive > Users > Your username> Library > Caches > com.apple.safari
    Hard drive > Users > Your username> Library > Caches >Metadata > Safari
    The last file I dragged to the desktop was the form values folder. No idea what actually worked but it's up and running and actually moving faster than before.
    Question now is do I trash all these folders I dragged out to the desktop? Or do some need to go back? Any other safari maintenance I should do now that it's open? I emptied the cache and cleared the history. Just trying to be preventative. Thanks iBod for your suggestions and I hope this helps someone else as it appears that many have had this issue.

  • Error message "incorrect pasword or user name given for gmail"

    When i'm conected to my home wifi or with 3G, i can't read my emails for my gmail account with Mail. Error massage says wrong pasword or user name given for gmail but it works when i'm on the wifi at work. I tried to disable SSL but i can't change any of the smtp stuff, it's all grey.
    All the pop smpt etc are activated on my gmail account.
    And it's the same on my iPad.

    I just googled your issue and found 100's if not 1000's of similar problems with verizon.
    Perhaps it's best to wait to try on their forums since it's apparently a widespread issue.

Maybe you are looking for