Error "Select one of the installed languages"

Hi guys,
I'm completely new to WAD. So i'm trying to publish a simple application to see how it works. But when i select "Execute" my browser is opened but the webpage shown is an error 500 saying "Select one of the installed languages".
I didn't find where i could select a language. I also checked that my browser has English language. But the message seems more to come from SAP side (it's kind of the same you get in SAPLogon.
Any help would be welcome :-).
Thanks in advance,
Thomas

hi
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/9e/9f653ade969f4de10000000a114084/content.htm
or for internal modeling follow this procedure
The language settings enable you to set the following parameters for accessing worklists:
Source language
Target language
Translation area
Another target language in which translations or proposal pool entries can be displayed for reference purposes
The source and target language settings also apply to your statistics display in transaction SLLS.
Procedure
1. Call up transaction SE63.
2. Choose Utilities u2192Settings.
3. Select the Languages tab page.
4. Enter the translation area in which you usually translate. To display a list of available translation areas, use the input help.
5. Enter source and target languages for the worklists you want to call up.
6. In the Text Display in Other Language field, enter another target language in which you want to display translations or proposal pool entries when working in the short text editor. Otherwise, you need to select the required target language in a dialog box.
Result
These parameters take effect the next time you call up a worklist. You can change them manually if you want to call up a worklist for a target language other than your default target language
Regards
Santosh

Similar Messages

JOB error: "Select one of the installed languages"

Dear all,
         if we execute some standard program/function in background mode the job stops with the following error:
" Select one of the installed languages ".
If we execute the same standard program/function immediately after the above error all run without error.
We have the following patches level:
SAP_BASIS          700          0017     SAPKB70017
SAP_ABA               700          0017     SAPKA70017
PI_BASIS                         2006_1_700     0007     SAPKIPYM07
ST-PI               2005_1_700     0006     SAPKITLQI6
SAP_BW               700          0019     SAPKW70019
SAP_AP               700          0014     SAPKNA7014
SAP_HR               600          0007     SAPKE60007
SAP_APPL          600          0014     SAPKH60014
EA-IPPE               400          0014     SAPKGPID14
EA-GLTRADE          600          0014     SAPKGPGD14
EA-RETAIL          600          0014     SAPKGPRD14
FINBASIS                         600          0006     SAPK-60006INFINBASIS
EA-PS               600          0014     SAPKGPPD14
EA-FINSERV          600          0014     SAPKGPFD14
EA-HR               600          0007     SAPKGPHD07
EA-DFPS               600          0014     SAPKGPDD14
EA-APPL               600          0014     SAPKGPAD14
Any help?
     Gino Bonfiglioli

Hi Rohit,
            thank you for your help
Every job that stopped show the following error:
Date           Time      Message text                                                                   Me. cl. Me no. Me. ty
07.05.2009 09:24:55 Job started                                                                          00      516          S
07.05.2009 09:24:55 Select one of the installed languages                                     00     171          E
07.05.2009 09:24:55 Job cancelled after system exception ERROR_MESSAGE      00     564         A
I looked for any SAP notes but I didn't find the right one.
Gino

RZ20 Error - Select one of the installed languages

Dear All Experts,
I am facing error in RZ20 with this below description -
Select one of the installed languages
Any of you have been encountered with same error please advice.
All of your valuable guidance will be appreciable.
Regards,
Tayyeb.

Hello Tayyeb,
The reason is the Language you are trying to use is not installed in the System.
Ask your Basis Admin or Sys Admin to check the Transaction SMLT --> and check whether the language is installed in the system.
Thanks
SM

CCMSPING: Logon check error - Select one of the installed languages

Hi All,
For one SAP system I have logon check error (MTE: <SID>\Availability\<host>_<SID>I_<Instnr>\Logon-Check: RFC Error Message):
Select one of the installed languages
Could anybody help me resolve it?
Thanks a lot,
Alexander

Could you solve the problem?
Do you know the solution to this error message (Select one of the installed languages) regarding Logon-Check with CCMSPING?
Thanks in advance!

Select one of the installed languages- Idoc stuck in sm58

Hi,
We have observed a strange issue during testing.
Some interface Idocs going from R/3 system to XI got stuck in sm58 with error
Select one of the installed languages
Later it was found that language EN was not specified in RFC destination and in the user profile which was being used in this RFC.
It was fixed and interface was working fine.
What I was not able to understand was why other interfaces were processing Idocs successfully using the same RFC destination?
regards,
Anirudh

Hello,
Are your other interfaces still using the same RFC destination and port to PI , or do you have differnt? if different that could explain your issue.....

RFC_ERROR_COMMUNICATION: Select one of the installed languages

Hi Experts,
When I try to test the JCO Connection created for ESS.
name : SAP_R3_SelfServiceGenerics.
I am getting the error message like below:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Select one of the installed languages
If I try to edit the same,I am getting Null Pointer Exception.
Can anyone help me out to resolve this error?
Regards,
Karthick

Are you using an LDAP as your UME, or are the user records from from R/3 ?
Apparently (Ive never done it) you used to be able to force a default language by editing this file (back in the EP5 days):
<J2EE root>\WEB-INF\portal\system\properties\prtDefault.properties
Look at the following lines :
This is the default language to be used when none is specified
request.defaultlanguage=en
request.defaultcountry=us
If you prefer to have the same language for all users no matter their user locale, change the lines to this :
This is the default language to be used when none is specified
request.mandatorylanguage=en
request.mandatorycountry=us
I hope this works out for you

Message: "Logon failed. Details: Select one of the installed languages".

Hi all,
In Crystal Reports 2008 (version: 12.1.0.892) I want to make a new connection to our SAP ECC system (SAP Table, Cluster or Function). The available SAP systems as defined in my SAP Logon appear and I choose the ECC system. After entry of Client, Username and Password an error message appears:
"Logon failed. Details: Select one of the installed languages"
I'm quite sure the system tries to make the login in Dutch and that language is not installed in SAP ECC (just English and German). However, Crystal operates fully in English. Has anyone an idea why the login takes place in Dutch and how the language can be changed at login?
Thnx in advace,
Henk.

Hi Chris,
I am facing the same problem from Crystal Reports. I tried changing the locale as you instructed, but could not resolve the issue.
The difference here is, it was working perfect until a week before.
Appreciate your help on this.
Thanks & Regards,
Munir

SMQ1 in ECC sysfail (select one of the installed languages)

Hello Gurus
in our ECC system we are having sysfail error status in T code SMQ1 (select one of the installed languages), how to over come this
inputs are highly appricted

Hi Sreeram,
For the faster response you should be more specific. As you mentioned SMQ1 i.e. you are having issue in ECC outbound. You should also mentioned the queue type, i.e. the queue is for BP, material etc... and the error message details, message class, message number.
Search service marketplace with the details and you should be able to find some oss note.
Thanks,
Vikash.

Sneak Preview "select one of the installed languages"

Hello,
I have installed Sneak Preview 2004s ABAP.
If I logon with an empty language field, it runs fine, but in english.
I would like to use German, but when I enter "DE" into the field, I get above Error Message.
Is it possible to change Sneak Preview to German ?
Thanks
Armin

Hello,
meanwhile I have solved the problem.
For anybody, who has the same problem, the solution is here:
Edit the file:
<Drive:>\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_<hostname>
Find the line:
zcsa/installed_languages = E
Remark the line to:
#zcsa/installed_languages = E
Armin

[svn] 1263: Update language selection code so that you can actually select one of the new languages I recently added .

Revision: 1263
Author: [email protected]
Date: 2008-04-16 12:25:02 -0700 (Wed, 16 Apr 2008)
Log Message:
Update language selection code so that you can actually select one of the new languages I recently added.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java

Revision: 1263
Author: [email protected]
Date: 2008-04-16 12:25:02 -0700 (Wed, 16 Apr 2008)
Log Message:
Update language selection code so that you can actually select one of the new languages I recently added.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java

ADO Error: 0x00000001 Argument error. One of the column names specified is blank.

I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
Attachments:
AddNewMeasurer.vi ‏40 KB

tripped wrote:
I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
The query "appears" fine. Well, obviously it isnt' fine. The database is telling you that.
What is the SELECT query you are sending?

I have six memory cards and my computer will no longer download the pictures from them into my iphotos. Says error with one of the pics. Has anyone had trouble lie this and what do I do?

I have six memory cards that my computer will not download. It says there is an error with one of the photos. Has anyone had this problem and what do I do to fix it? It used to download

What version of iPhoto?
Does this message come on all six cards?
Are these Raw or Jpegs? If Raw, what camera?
Can you access the images on the cards with Image Capture (in your Applications folder?)

Forcing the user to select one of the OBIEE prompts?

Hi All,
Iam new to OBIEE I have a requirment in which I need to force the user to select one of the selection from prompts in OBIEE eg: you need to select one of the contry either India or America to get the other prompts enable and filter the report?
Any help is highly appriciated.

Hi,
You can set a default value in your first dashboard prompt like 'please select a country' then if the user doesn't select something no result will be returned until he selects a valid value
Then make the other dashboard prompts constrained.
Regards
Adil

Cannot install mountain lion. error "This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X."

cannot install mountain lion. error "This copy of the Install OS X Mountain Lion application is damaged, and can't be used to install OS X."

You do meet the hardware requirements. Otherwise you wouldn't have been able to purchase ML.
If you're connected wirelessly to your router, connect with Ethernet.
If you're connecting through a proxy, connect directly.
Boot in safe mode (shift key down at startup) and try again.

How can I change the installed language of my Creative Cloud applications?

Hi.
I installed Creative cloud a while ago, but now i want to change the language in the programs. I thought my native language would be good, but when im used to English in the programs, it´s really no good. :/

Creative Cloud Help / Adjust the install language | Creative Cloud applications | CCM -
http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

Error "Select one of the installed languages"

Similar Messages

Maybe you are looking for