Error " Selected numbers does not agree with transferred"

Hi,
While in production support I got a issue saying
Error " Selected numbers does not agree with transferred"
How to solve this.
Regards
San Reddy

Hi,
This doesnt mean that its a failure.
I will suggest you to check a few places where you can see the status
1) SM37 job log (In source system if load is from R/3 or in BW if its a datamart load) (give request name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
Also see if there is any 'sysfail' for any datapacket in SM37.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.(In source system if load is from R/3 or in BW if its a datamart load)
5) SM58 and BD87 for pending tRFCs.
Once you identify you can rectify the error.
If all the records are in PSA you can pull it from the PSA to target. Else you may have to pull it again from source infoprovider.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish. You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the data tables.
SM21 - Job log can also be helpful.
In your case its probably because of tRFC issue.
Check SM58 / BD87 for pending tRFCs.
Thanks,
JituK

Similar Messages

BW: Data Packages Selected number does not agree with transferred

Hi,
I am running into an issue with an existing master data text load process chain in Production. The extractor is from ERP and there are only 159 records. What is happening is the chain is stuck on yellow but there is an issue with the data packages. The status error message is 'Missing data packages for PSA table'. Clicking into the Details tab the message then states Data Package 1: arrived in BW; Processing: Selected number does not agree with transferred.
The version is BI 7.0. I have done the following steps and still no luck. Looking for any suggestions. Thanks.
ERP
    SM37 (Job always finishes)
    SM58 (No IDOCS stuck)
    ST22 (No short dumps)
BW
    SM58 (No IDOCS stuck)
    SM37 (Job always finishes)
    ST22 (No short dumps)
Reactivated Datasource: RSDS_DATASOURCE_ACTIVATE_ALL
Reactivated Transformation: RSDG_TRFN_ACTIVATE

Hi
Just check whether source system connection is ok in RSA1.
if it is fine then have a loo at the below thread(last post)
Data Load from R/3 to BW-'Selected number does not agree with transferred'
Regards,
Venkatesh

Error: Result of agent resolution does not agree with agents of task

Hi,
I'm getting the error "Result of Agent Resolution does not agree with agent of Task". I'm passing the agents in Expression which I'm getting from Method in my previous step and passing to workflow container and it is getting passed to Expression. The userid is present in that container. And the Task is assigned as General Task but still I dont know what might be the problem. The ID is with 'US' prefix. Even if I give the userid directly in the Task, it shows the same error.
Regards,
JMB

Hi
Incase you are using different clients for development and testing, make sure in testing client, task is assigned as general task.
You may check the way the userid is passed. Please note that the US is object type and Object ID(user id) is different. Both of them should not be part of one string. So while you test, just pass the user id without a prefix US. Hope it will work for u.
Regards
Waz

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chris

you can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers

Result of agent resolution does not agree with agents of task

Hello Experts,
I am trying to configure a workflow for Employee Travel expense, the Business object am using is BUS2089 for event CREATED.
And am configuring workflow task WS20000040 (Approve trip). and in the work flow builder I am assigning User as an Agent and fixing it to a user say "USER1" for Task 404 (Check trip facts) and for Task 416 (Approve trip facts) again am assigning User as an Agent and fixing it to user say "USER2"
Now when the Trip is saved using PR05, this work flow is triggerred - which is what i want and it sends work item to USER1, now when USER1 says Trip facts are consistent the work item should go to USER2 but here it is failing and the log says "Agent determination for step 0000000416 failed" and details say "Result of agent resolution does not agree with agents of task" which is SWF_RUN 544
Can you guys help me by telling where am going wrong. Am i missing some configuration somewhere.
I have changed the Task properties - Attributes i have changed the task as a General Task,(i did it by navigating through Control Tab of the task)
appreciate your response.. Thanks
Usman

Thanks Novjot
I made the task as a general task and i see a gree light adjacent to it, but still it doesn't work.
the way i made it as a general task is as follows:
1. in the navigation area - select task 416
2. In the right hand side, on Control Tab in Task properties, click on the Red button and maintain Agent assignment
3. In Agent Assignment change attributes to General Task - instead of General Forwarding allowed.
save and activate, and generate runtime version
Is this correct or any other way?
Thanks
Usman

Agent resolution does not agree with agents of task

Hi Guys,
I extended B.O-IDOCAPPL to ZIDOCAPPL to catch the inbound error for the IDOC.
The workflow gets triggered correctly when we get the inbound error.
In the workflow i created a custom display method....this is a dialog method. Now when the workflow comes to this point it gives the message in the technical log
" Result of agent resolution does not agree with agents of task" 
Now instead of calling this method if i just put a user decision it shows up fine in the users inbox.
I have tried SWU_OBUF , Refresh from SWUS , Refresh from Inbox
Nothing seems to work, anyidea as to what's happening here ?
Message was edited by:
Abhishek Dhoundiyal

I have tried :
1.) hardcoding user ID
2.) using a role
3.) using WF initiator...
This is set up as a general task......
One interesting observation that i had... (If the below is irrelevant please ignore)
If i run the task via SWUS it executes but still does not evaluate the agents.. and then if i execute the workitem in SWIA it lets me execute...
Now if i trigger the workflow it executes but still does not evaluate the agents but it does not allow me to execute the workitem in SWIA , the technical log says workitem not found.

Field catalog does not agree with the fields of the functional area

G'day everyone,
I am using a generic extractor via infoset to extract data from R/3 source system.
Using RSA3, I have obtained an error message and no further details.
****ERROR MESSAGE
"Field catalog does not agree with the fields of the functional area
Message no. RSUQ134
****ERROR MESSAGE
I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
Anyone knows how to get more details for this type of error? Or how to fix this problem?
Regards
Wayne

I think I have just solved it.
Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
Cheers

Error : Selected user does not exist

I m trying to send the alert messages. And for this I am using message object of DIAPI and sending alert to usercode 'manager' of SAP B1. But i m facing the error that 'Selected user does not exist' and it is present in the OUSR table for the user related details.

Hi, Amit Jadon!
If you send a code snippet, it will be more helpfull for us to solve a problem.
It's my "sending for yourself" example. Log in with a "problem" user and try it:
public void SendMess(string Mess, string Subj)
int errn;
string mes;
SAPbobsCOM.Messages msg;
msg = (SAPbobsCOM.Messages) pCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oMessages); //pCmp - company obj
msg.MessageText = Mess;
msg.Subject = Subj;
msg.Recipients.Add();
msg.Recipients.SetCurrentLine(0);
msg.Recipients.UserCode = pCmp.UserName;
msg.Recipients.NameTo = pCmp.UserName;
msg.Recipients.SendInternal = SAPbobsCOM.BoYesNoEnum.tYES;
msg.Add();
pCmp.GetLastError(out errn, out mes);
if (0 != errn)
    SBOApp.MessageBox("Error in msg.Add(); " + errn + ", " + mes, 1, "Ok", null, null);
HTH,
Alexey

Error: Requested resource does not exist with SAP WebAS..deployed an ear

hi,
i deployed an application using SDM gui deployement manger. the application is built using struts,spring etc. I have also created a datasource with Oracel 9i succesfully and hav associated it with the application.
When i try to access the application using the struts based path i get an "ERROR 404:- Error: Requested resource does not exist". I also tried accessing the index.jsp page directly without struts paths but dont know why i get an error "File [appContext/admin/index.jsp] not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples]."
The same ear is working perfectly fine with IBM WSAD but not in SAP Web AS ?? is there any configuration issues that i need to address ?? Kindly help me ASAP !!
Regards,
Vaibhav

Hi,
The Required server log contents are as follows:-
#1.5#000CF1AFC124017A000000020000067000041B1D550F525C#1155712701853#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.jsp.JSPParser#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server#Plain###Runtime error in compiling of the JSP file <C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp> !
The error is: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
 com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
Exception id: [000CF1AFC124017A000000000000067000041B1D550F4D94]#
#1.5#000CF1AFC124017A000000030000067000041B1D550F5C88#1155712701868#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#sap.com/doculine#com.sap.engine.services.servlets_jsp.client.RequestInfoServer#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error##Plain###Processing HTTP request to servlet [action] finished with error. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:117)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.getClassName(JSPServlet.java:238)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.compileAndGetClassName(JSPServlet.java:429)
 at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:169)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
 at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
 at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1001)
 at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:560)
 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:209)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:316)
 at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:372)
 at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1063)
 at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:386)
 at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:229)
 at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1194)
 at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.services.servlets_jsp.server.jsp.exceptions.ParseException: TagLibValidator returns error(s) for taglib [/WEB-INF/c.tld]: [
 com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)(:main:, row=739, col=23) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: a9(:main:, row:739, col:23)
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.validate(JSPParser.java:243)
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.initParser(JSPParser.java:348)
 at com.sap.engine.services.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:105)
 ... 37 more
#1.5#000CF1AFC124017A000000050000067000041B1D550F5F94#1155712701868#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#sap.com/doculine#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#2####661184d02cf711db80fa000cf1afc124#SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#/System/Server/WebRequests#Plain###Processing HTTP request to servlet [action] finished with error.
The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException: Internal error while parsing JSP page [C:/usr/sap/J2E/JC00/j2ee/cluster/server0/apps/sap.com/doculine/servlet_jsp/doculine/root/admin/login.jsp].
Exception id: [000CF1AFC124017A000000030000067000041B1D550F5C88]#

Error : Profit Center does not match with Business Area. Message no. ZGLTFI

Hi Everyone,
Error occurs when doing inbound PGR. Processed done so far are the following:
Normal PO created & released.
Inbound created
Transfer order created and confirmed.
When doing PGR via VL32N > click Post Goods Receipt error occurs
Profit Center does not match with Business Area
Message no. ZGLTFI0001031
Checked already in KE53 the Profit Center used was assigned to the Co. Code used in the PO.
The same Profit Center was maintained in material master.
The Plant used was assigned to proper division and business area.
Any other ways to check?
Btw not only in Inbound PGR the error occurs .. also happened in MIGO and MB1C.
Tried to do other transaction involing the material, plant and profit center all give the same error.
Any info shared is much appreciated.
Thank you.

this error is not a SAP standard error, it is an own message class (ZGLTFI0001), so it must be issued from a validation or user exit. Please find the user exit, or talk to FI Team and ask what they check

Windows partition utility does not agree with fdisk

The background for this is here. Tl;dr: I created 3 primary partitions (SYSTEM, C:, shared data) and two logical (/boot and /) for a dual boot system, and ran into issues with chainloading from win7 with EasyBCD. To troubleshoot, I simplified the setup to 3 primary partitions, and am now trying to go back... but can't!
Method:
- Delete all volumes/partitions after C:
- Create primary partition of ~100G, NTFS formatted (shared data)
- Create logical partition of 256M, unformatted (/boot)
- Create logical partition with remaining space, unformatted (encrypted /)
I used the built-in win7 partition utility for this, and it looks like it worked: screenshot
My first alert was the fact that Minitool Partition Wizard didn't agree with win7: screenshot
In fact, trying to create logical partitions with Minitool reports that the operation was successful, but as soon as it completes they turn back into unallocated space. I actually tried this first and then went with the win7 utility as I thought something was wrong with Minitool. I'm starting to think it's the other way around and that Minitool sees the correct state and win7 is wrong. That diagnosis comes from the output of fdisk via booting an Arch installation image:
Invalid flag 0x7d9b of EBR (for partition 5) will be corrected by w(rite).
Disk /dev/sda: 238.5 GiB, 256060514304 bytes, 500118192 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x1e6513b3
Device Boot Start End Sectors Size Id Type
/dev/sda1 * 2048 2101247 2099200 1G 7 HPFS/NTFS/exFAT
/dev/sda2 2101248 172433407 170332160 81.2G 7 HPFS/NTFS/exFAT
/dev/sda3 172433408 387473407 215040000 102.6G 7 HPFS/NTFS/exFAT
/dev/sda4 387473408 500115455 112642048 53.7G f W95 Ext'd (LBA)
/dev/sda5 2961659748 5859253686 2897593939 1.4T 65 Novell Netware 386
No idea whatsoever on the type ID assigned to /dev/sda5, nor why it shows as 1.4T. I've tried various things with no success:
- check/fix errors via win7 drive properties (no errors found)
- delete all non-win7 partitions, grow the partition to the full disk, and then shrink back again
- shrink win7 to ~80G, create a single primary partition, boot Arch install media, format with ext4, `dd if=/dev/zero of=file.txt` until full, then delete file
- change order (2 logicals, then primary)
- format the logicals with NTFS upon creation instead of leaving them unformatted
- assigning drive letters upon creating the partitions vs. no drive letter
I'm hesitant to just do everything from fdisk, as I have McAfee Endpoint Encryption and I'm not sure if writing the partition table from outside of windows can possibly ruin anything related to how the startup decryption works. If someone can assure that dd'ing some number of bytes on /dev/sda would allow me to reverse the process (restore said bytes to the beginning of the drive) in the event of any failures, I'd be willing to give that a shot. I know I've dd'd the encrypted MBR in the past and successfully restored it (after trying to install grub instead of the windows bootloader) just fine and been able to boot again. Not sure if messing with the partition table is any different.
Thanks for any suggestions!

Hi Pradhiba and A.H.P,
I got this problem yesterday and I tried all steps mentionned in this message of yours. Just for your information I checked the following points also (maybe it helps you to analyse better the problem):
System Analysis:
1. SE16 T000
2. SE16 RSBASIDOC in both systems
3. SU01 PROFILES
    BWREMOTE       > To be checked
    ALEREMOTE   and profile S_BI-WX_RFC   see note 150315 > To be checked
4. WE20 Partner Profile LS settings in both are OK
    BW outbound RSRQST
            inbound RSINFO RSSEND
    R/3 outbound RSINFO RSSEND
                             inbound RSRQST
    also check 'RSSEND' in R/3
BIDOCTYP = ZSUB161 > To be checked
5. SM59 .. appears to be ok
6. check inconsistency in tables RSISOSMAP and RSOSFIELDMAP
   SE16 BW for table RSISOSMAP
7. SE16 BW for table RSOSFIELDMAP
     no 'T' entries
8. in BW > source system
The remote users for calling and sending data must have the type
   Dialog or CPIC (see Note 161570).
9. Run the report RS_TRANSTRU_ACTIVATE_ALL (activate all BW structures)
10. check entries on the table bdls
Maybe I will re-check all this again today.
In the mean time I will appreciate any other suggestions that you may have about this issue.
Thanks,
PL.
Message was edited by: Paulo Lie
Message was edited by: Paulo Lie

Purchased music on Macbook Pro does not agree with the purchased music on iPad.

I have current versions of all software. And just bought a new iPad. When examining purchased music in iTunes on my MacBook Pro, it is pointing to current purchases over the past few years. But when examining purchases in iTunes on new iPad, it is pointing to very old purchases made several years ago. The purchases to do not agree - they are not in sync. I want them both to be in sync, or at least have both devices point to the current purchase list. Thanks in advance.

I have my iPhone attached via USB cable to my MacBook Pro.
I have been able to successfully sync my calendar now by activating iCloud on my iPhone and via System Preferences on my MacBook Pro after I learned that Maverick does not provide iSync.
However, I have a new problem: The calendar does not "upgrade" (it gets stuck) and I receive a "403" error and it gets stuck in a loop that I have to force quit. I have looked that up in the forum, but wasn't able to solve this issue because the solutions are way to technical and out of my league.
Very disappointed development as removing calendar from iCloud now also deletes all my entries on the Mac.

License value written off does not agree with total of assigned documents

Hi,
We have a license in GTS with a total written off value that is greater then the total value of all the orders assigend to it. I believe this may have been caused by an issue we had with transferring the orders from R3 to GTS. We had a large order taht was failing to completely transfer due to the log in GTS being full. We changed the config to delete the old logs and only save the ne wlog and the ordre now transfers correctly. However, it looks like an item is still incorrectly written off the license. I ahve tried removing and reassigning the license etc with no luck. Is ther a prgm or tcode that can be used to recalculate the correct written off/assigend balance on a license?
Thanks,
Brian Sisco
PW GTS

No. You would need to cancel the docs in ECC or at least reverse it.

Multiple Select List does not Refresh with Dynamic Action

All,
Scenario:
Using APEX 4.2.2, I have a Select List page item (P4_SPONSOR) set to allow multiple values which has a dynamic LOV to populate the list. What I would like to do is highlight the display values based on another page item's value (P4_DRIVER_ID). When I set the source of P4_SPONSOR to static text, such as a delimited string of 1:2:3:4, any display values where the return values are equal to the static text are highlighted when the page loads.
Problem:
The problem lies in trying to use a query as a source for P4_SPONSOR which is filtered based on the other page item, P4_DRIVER_ID. For instance, my SQL Query (returning colon separated values) returns the same as the static text noted above. In the query's WHERE clause, I specify that the driver's ID is equal to P4_DRIVER_ID:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
This, as I understand it, would necessitate a refresh of P4_SPONSOR whenever the value of P4_DRIVER_ID changes. So, I have a Dynamic Action that does just that. When executed on the page, I can see the P4_SPONSOR multiple select list actually refresh, but none of the display values become highlighted.
Thoughts?
Thanks,
-Seth.

Seth,
A dynamic action refresh of your select list will refresh the list of values (this is what you are seeing), it will not refresh the value of the item itself. In fact, it will remove any values that you had already selected. To refresh the value you will need to add additional dynamic actions.
Create another dynamic action with:
Event: After Refresh
Selection Type: Item(s)
Item(s): P4_SPONSOR
If this was a normal select list you could just create a Set Value action and use your query to set the value of the select list. Since this is a multiple select list your will need to get your colon delimited value first and then use some javascript to set the values of your select list.
Create an hidden page item name P4_SPONSOR_TEMP.
Add a true action to your new dynamic action:
Action: Set Value
Set Type: SQL Statement
SQL Statement:
SELECT sponsor_id
FROM sponsors_drivers_xref
WHERE driver_id = :P4_DRIVER_ID;
Page Items to Submit: P4_DRIVER_ID
Selection Type: Item(s)
Item(s): P4_SPONSOR_TEMP
Add another true action to your new dynamic action:
Action: Set Value
Set Type: JavaScript Expression
JavaScript Expression:
$("#P4_SPONSOR_TEMP").val().split(":")
Selection Type: Item(s)
Item(s): P4_SPONSOR
--Jeff

Error " Selected numbers does not agree with transferred"

Similar Messages

Maybe you are looking for