"Error sending message" - I really need help

Hello. I have not been an iPhone user for too long, so thereas i do not know much about it. I do have an iPhone however, and everything worked just perfect up to 1 week ago. Here is what happened:
I tried to send a text message (SMS) to one of my friends, and first it said "error sending message" but then it was sent afterall, so i didnt bother. 1 day after, I could not send SMS to ANYONE else, not even an unknown number, nothing. it said "error sending message" EVERY time. What happened:
*tried to send SMS
*got the error
*lost ALL my signal
*NO SIGNAL message
*NO SIM message
*FULL signal back
*Carrier found again
The point is, that when i try sending a message, it comes up to 3/4 or so, and then shows the error and so on. it won't send ANY messages anymore
I CAN receive messages
I CAN make phone calls
I CAN send SMS from another phone
So my figure is, that the problem is the phone its self, not the SIM card. Is it making a contact??
I did a little research, and found out this:
*Many, many 1.1.2 iPhones have this issue.
*If you experience it, you may find a solution, but it's so that they do not all work on all phones (which is surprising to be honest)
*However, stunningly is that everybody are able to receive messages
What happens:
*in most cases, it happens like this:
-try to send a message
- it comes to 3/4, then stops and says "error sending message"
-phone looses signal
-phone tells you there is NO SIGNAL
-5sec later phone has FULL signal
-this is sometimes followed by a "Locked SIM" sign
what i have experienced now:
*i found out that sometimes, for some reason the message sending "comes back" tho it doesnt stay long.
*if you try to send a message, and it errors you, you hit home.. if you then go back to messages you can see the unsent one, but if you look at the number its in a format (ex): 1919<1919> or Rebecca<+2183481481>
and not 1919 only. I have seen this only in case its not send, otherwise it's 1919.
This is it. Please, I really don't know what to do, and I hope anyone of you guys that might know more about the iphone might help me. I have really tried everything!

Please, can someone help me??

Similar Messages

I have an iPod Nano 7th generation, and I keep getting an error saying that iTunes could not recognize my device. I have tried nearly everything,except I don't have admin rights on the computer, and really need help.

I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.

Hi Dawson777,
Thanks for visiting Apple Support Communities.
It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Best Regards,
Jeremy

Error msg. 1327 Drive not found REALLY NEED HELP

Hello,
I recently installed iTunes and ever since then whenever I try to install new software from a website I.E. Adobe.com "Reader" I get an error message saying F:\ drive not found, which there is not F:\ drive.
I have gone to administrative tools but have only found C:\ drive. Now, when I go to "Run" in the Start menu I see in the browse menu "F:\iTunes.exe and iTunesHelper.exe
My iTunes does work properly but on start-up do get an msg. saying it was not installed proberly and to re-install.
I do not want to re-install iTunes for fear I will get the same msg. and not be able to complete install.
Really need help on this because I need to install Acrobat Reader for work.
Thanks
Mark
[email protected]

Doublechecking something.
Could you confirm for us both that error message number and message?
Checking, because the 1327 error message number usually comes with an "invalid drive" message rather than a "drive not found" message.

Error Sending Message///please help

has everyone know this situation??already 2 month error sending message ,but i can received and make a phone call
when sending message then comes message "protocol error" or "requested facility not subsscribed" for your info am still have balance in my credit or am using post paid ////thank you very much friends
type 8320(curve)

Really, there are many users with the same problem in the forum, all of them with prepaid accounts, try with upgrading the software and let me know, here is the link
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03621&sliceId=1&docTy...
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Error in deploying my spring web app, really need help?!

I am using eclipe 3.3.0 and tomcat 5.5.23, spring 2.0.6
And I get this error while deploying.
Can anyone tell me where it is comming from and what i should do to fix it?
If you need any more info please ask that too, I really need help..
I have browsed all over the internet, but found nothing really helpful..
In my browser I get a Http status 500 error:
exception
javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
root cause
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     java.lang.Thread.run(Unknown Source)
And this is what I see in the console:
10-sep-2007 14:16:11 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jre1.6.0_02\bin\client;C:\Program Files\Java\jre1.6.0_02\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\maven\maven-2.0.7\bin;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\;C:\Java\SDK\bin;C:\maven\maven-2.0.7\bin;C:\apache-ant-1.7.0\bin;C:\spring-framework-2.0.6
10-sep-2007 14:16:11 org.apache.coyote.http11.Http11BaseProtocol init
INFO: Initializing Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:11 org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 4312 ms
10-sep-2007 14:16:12 org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
10-sep-2007 14:16:12 org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
10-sep-2007 14:16:12 org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
log4j:WARN Please initialize the log4j system properly.
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SpringBikeApp,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet /SCWCD threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SCWCD,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
SEVERE: StandardWrapper.Throwable
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
SEVERE: Servlet threw load() exception
java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
     at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/,J2EEApplication=none,J2EEServer=none
10-sep-2007 14:16:14 org.apache.coyote.http11.Http11BaseProtocol start
INFO: Starting Coyote HTTP/1.1 on http-8090
10-sep-2007 14:16:15 org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
10-sep-2007 14:16:15 org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/187 config=null
10-sep-2007 14:16:15 org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
10-sep-2007 14:16:15 org.apache.catalina.startup.Catalina start
INFO: Server startup in 3578 ms
Many Thanks in advance for any help!!
Grz Barbera

hi istvan,
we are also migrating from websphere to netweaver.
But in spring framework we r facing problems.
We hav spring-beans.jar file in lib dir of Web Application. But When we are creating BeanFactory from xml as,
BeanFactory beanFactory = new ClassPathXmlApplicationContext ("client-config.xml");
clent-config.xml file contains :
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
<beans>
     <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" >
          <property name="location">
               <value>conf/service-client/client.properties</value>
          </property>
     </bean></beans>
But code is giving exception: ClassNotFoundException -org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.
Wat is the problem ?
Kindly help.
We are also using JAAS for authentication.We are refering above code from our LoginModules login() method.
Regards,
sagar.

I really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying _

i really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying

If your rescue email is not working and you cannot remember even one answer, then you only have one option - call Apple.
http://support.apple.com/kb/HT5665

I cannot connect to app store. I tried all the possible ways to fix these error but still nothing happened. I really need help i cannot update my applications. I'm using iphone 5 ios 8.1.2

please i really need help!

I had the same problem on my Mac Pro, iPad, Macbook Pro. Could not load iTunes, App Store or any support community. Called Apple Care and she asked if I had rebooted my router in awhile. I had not. Each of these would load half way and then just stop. She said iTunes and App Store could be stopped as they are different than my Discover or e-Bay accounts, which were fine. So during the 75 min call I pulled the power cord of the Netgear Wi Fi router, let it sit for 2 or 3 min and then replugged the power adapter. In about 4 to 5 min the sites started to load, although not displayed correctly. After quitting and re-starting the apps in question they are working fine again. But this has happened twice now in a 6 hour time period. So give it a try, but also give it a couple of tries.

Really need help BBM not working on wifi

ok so I've just updated my torch 9800 software and with it all of the apps, but there's the problem that my BBM wont work on wifi. why is that? I'd tried to resend the service books but there was a message about server conection problems, then I'd even tried by the BBM configuration icon in the setup menu but there was another message (imposible to configurate BBM, a temporary error was notified with the server) so I dont really know what to do... really need help this is my only comunication way with my family on the other side of the world.

On the handset, go to:
For OS5 and 4.x
Options - Advanced Options - Host Routing Table
and click Register now, and escape back to the home page.
For OS6 and higher
in options, device , advanced, host routing table, click on menu and choose register now.
Wait 2 minutes and see if registration to network happens.
Resend your service books from your carrier BIS site:
From your handheld device: http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

[Locked] Really need help trying to log users

I really need help trying to show when members have logged in. This is my second post and and the code that I was given, didn't work and now I can't get anyone to tell me what is wrong with it. Here is the code and error message:
Error message is "Unknown column 'billsmith' in 'where clause'
Here is the code I am using:
mysql_select_db($database_connRegister, $connRegister);
$logged_in_user = "-1";
if(isset($_SESSION['MM_Username'])) {
$logged_in_user=$_SESSION['MM_Username'];
$query_online_now = "UPDATE users SET logged_in='Online', last_login_date=NOW() WHERE user_name=$logged_in_user";
$online_now = mysql_query($query_online_now, $connRegister) or die(mysql_error()); }
$query_not_online_now="UPDATE users SET logged_in='Offline' WHERE last_login_date<NOW() - INTERVAL 60 MINUTE";
$not_online_now=mysql_query($query_not_online_now, $connRegister) or die(mysql_error());
Can someone please tell me why it isn't working?

This question has been answered here: http://forums.adobe.com/message/2351465#2351465.
Locking this thread to avoid duplication. Please reply in the original thread if any further help is needed.

I get error 0x80073cf9 now and I need help to FIX Windows Store can't update any Apps & can't install any Apps now?

Hi I hope some one can tell me step by step how to fix windows 8.1, I can't update any of my Apps and can't install any new apps now and I get error code 0x80073cf9? But my problem is different than most of the other FIXES I read about, because nothing
fixes my problem to be able to install new Apps and get app updates and stop getting that error code?
I keep getting same error code 0x80073cf9 after I try any of the FIXES I have read about and tried all the fixes on my Lenovo Z580 laptop, that came with windows 8 and updated to 8.1. And ever since I bought this laptop I could
always install and update all my apps for the last year when I had Win 8 and Win 8.1 now.   This has been going on since April and May and its driving me crazy!    And from the May updates I did get all the updates and
I also installed the KB update that said I need this KB to get all updates in the future.
But all the other people when they get this error code they could not even open and use any of their Apps already installed. And they also get the error code when they try to update or get a new apps.
But I can click on any APP installed already and use all my Apps with no problems.   I have read so many how to fix this error code but nothing works! :-(     I have tried a lot of
the fixes on Microsoft forums that says do this and the fix will get rid of the error code but I keep getting the same error code after I try that fixes.   And I have read a lot of other windows 8 an windows 8.1 web sites when
I search for how to fix this error code?   And tried all of the fixes that were different from the Microsoft forum fixes. But after I try those fixes I still can't install any apps or can't get my app updates?
Please to any person's who can help me by giving me more that 1 fix, because I have tried so many fixes, If you know more that 1 fix tell me how to do your fix step by step so I can understand what you say to do to fix my windows store?
Thanks for any and all help? And if I don't get any help in this section of the forum I will try to put this in a different area, if I don't get any help at this section of the forum I will try to ask this in another part of he forum ok?
I really need HELP with this so I can get my laptop working again to install new apps and get the updates to my apps?

Fixed the problem by going to settings/store and logging out with apple ID. Then logged back in with password and updates, apps, and iTunes store seem to work ok now.

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

open an app and click help>activate.
if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I did a manual restore but it gave me an error it was 3914 i need help fixing it.

i did a manual restore but it gave me an error it was 3914 i need help fixing it.

From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
B-rock

"Error sending Message - check your ...." doesn't identify the message generating the error which is probably one which is autoforwarded.

I have an email filter which auto-forwards an email depending on the To: field. When I open Thunderbird the inbox sometimes displays emails which should have been forwarded which are not flagged as forwarded. If I then manually forward this email I get a response " email successfully sent" followed shortly after by another message " error sending message ... check your email addresses (or similar)" - Is this the same email as the one which I have just been told has been successfully sent - how can I tell which email the message relates to - has it been sent? etc etc???
Thanks for reading this far - any help would be very much appreciated
MC

Sorry Matt - 'fraid i'm guilty of not supplying all the facts ... the message arises from Thunderbird vers 9.01 running on a laptop with OS Win 7 Home Premiun SP 1. I think your reference is to problems running other email software.
Mike

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

Really need help with MSI R7970-2PMD3GD5/OC:(

Greetings to all,
I really need help with my brand new MSI R7970-2PMD3GD5/OC. I've purchased it two days ago and I didn't really have time to test the card until yesterday. The card is I think way to hot for my "liking". It idles at 56c-60c, at full load in Heaven benchmark 3.0 in 1920x1080, extreme tessellation and 8xAA card reaches 95c-97c. Stock cloacks are 1010Mhz/1375Mhz and stock voltage is 1,174v. Case is being cooled by two Noctua NF-P12 fans. Also I tried lowering the voltage and "underclocking" the card to a standard 925Mhz in small increments, but it doesn't help at all. Each and every time it results in BSOD and dx dll errors and complete system failures. Replacing the card wouldn't be a problem if I lived in a "normal" country that has access to a steady supply. Retailer that sold me a card told me that only 5 cards total have been imported from the launch day and told me that i bought the "last" card in my country. They could order a replacement but it would take them more then a month to do so.:( Ohhh and one more thing I don't overclock, everything in my case is at their default values.
Recently, I read that "Amd released" a bios update for a standard reference boards that turns them into a "GHZ editions". Also lot of users report a lower voltage requirements and lower temps with that "boost bios". As I understand this card pcb is not Amd's reference board design, I could be wrong it's not that uncommon.. So I didn't want to risk warranty by flashing it to a position 1. Will MSI release the boost bios for this model of card? I am humbly asking MSI staff on how to proceed regarding this problem. I would be immensely grateful for any help you could provide.

Quote from: Svet on 24-August-12, 18:13:26
what PC case you use exactly?
have you tried to open PC case side door and to retest?
Hi,
it's open case. If i close it the temps get even worse:(
They get better for other components, but not for gpu. Two Noctua NF-P12's are cooling the case, first one is positioned above gpu, left side next to cpu. Other is right beneath the gpu, right side of case. Just under the hdd section of the case. I tested each and every component with my backup card nv 8500gt. They function within the specified parameters. I'm getting somewhat worried.
П.С. Поздрав Свет
да ли сте ви са наших простора да не куцам на енглеском?

"Error sending message" - I really need help

Similar Messages

Maybe you are looking for