Error: Serv:RequestTimeout

iChat shows all of my AIM buddies as offline and when I go to instant message one of them I get the following error after a few minutes: Error: Serv:RequestTimeout.
I was able to sign on iChat about an hour ago so I am unsure as to why this is happening? Any help is appreciated.

ya, you did the right thing... what you really need to do is switch to port 443, and turn ssl on... otherwise, it would go right back to 5109...

Similar Messages

Aim An AIM service error occurred. Error: Serv:RequestTimeout

When using Aim in ichat there is a common error that occurs every 2 -3 minutes
the message that it gives me is
An AIM service error occurred. Error: Serv:RequestTimeout
Anyone help please
Thankyou
email:
[email protected]

And just about a month later this issue comes up again. It seems that time is the only real answer to fixing this issue. I tried a combination of solutions last night and when I woke up this morning, I launched iChat...it flickered (like it does before it says you have logged in too many times too quickly) and I immediately quit the app.
Started up Adium, works like a charm.
Opened ichat about a half hour later, and started flickering again..what gives
Message was edited by: xryancx

"An AIM service error occurred. Error: Serv:RequestTimeout" - Please help.

So I've been having the dreaded
"An AIM service error occurred.
Error: Serv:RequestTimeout"
pretty much ever since I got my MacBook Pro a year ago. Up until recently, it only popped up maybe once a month. But now it's gotten to the point where I get the error message within 5-10 minutes of a chad starting with someone else. I have tried changing the port and whatnot, but I still get the same error message. I have gone through pages of similar topic forums, but no solution has fixed my problem.
Does anyone have any advice?
P.S. I tried switching to Adium. I hate it.

Shut down the computer any router and modem.
Repower the Modem and wait until it says it is Ready.
Then any Router and wait again.
Lastly power up the computer.
Also check that any DNS servers listed in the modem or router set up pages are copied across to the Mac > System Preferences > Network (Maybe advanced button > DNS tab).
8:43 PM Monday; August 17, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Ok seriously, this whole "Error: Serv:RequestTimeout" is ridiculous!

What is the deal with this?!? Sometimes (very rarley) iChat seems to work ok, but most of the time whenever I'm trying to chat with somebody, I'm able to send my message, but instead of receiving their message, I get these annoying pop ups that tell me "An AIM service error occurred. Error: Serv:RequestTimeout".
I've read about others having this problem, and I've done the whole Port 443 thing, I've tried forwarding ports on my router, I've tried erasing and re-installing OS X (because I'm always having other issues, with sites like youtube - don't get me started), but nothing is working.
Does anybody have any other solutions besides the ones that have already been stated that might work? This is getting old. Oh and btw, none of these problems were happening when I first got my MacBook (in January) and things were working perfectly for almost 2 months. So this is pretty recent, like the last two weeks or so.

Hi! ok.......i'll do my best. but it's word for word the same problem as junlee. When chatting, "Error:Serv:RequestTimeout" appears and interrupts my connection. only happens at home.
I'm with Comcast and I have the WCG200-CC router
Mac Firewall status:
set to Allow all incoming connections
Quicktime Streaming setting:
I followed your advice and Set System Preferences > Quicktime > Streaming to 1.5 and Restart iChat. Then set iChat menu > Preferences > Video section > Bandwidth Drop down to 500kbps
Network Settings ((USing DHCP or other)
If Using DHCP what device is being the DHCP server.
Linksys WCG200-CC wireless router, using via Airport
Using DHCP
IPv4 Address: 192.168.0.2
Subnet Mask: 255.255.255.0
Router: 192.168.0.1
Configure IPv6: Automatically
How many devices (modem snd routers) are involved in Connecting to the internet.
my husband's PC, Gateway running XP Pro, my MacBook Pro, Wii
Whether you use Parallels on an Intel Mac
don't think so - i thought parallels went out with ancient history! ha ha
Methods of opening ports in modem and/or router.
no clue on that one
Is Internet Sahring On ?
no
What Logi in port is iChat Using.
switched to 443, have tried 80 and the default
What ISP are we talking about ?
Comcast
What have you tried to get around any issues ?
set at 443
deleted com.apple.ichat.AIM.plist and restarted iChat
MANY TIMES
all was well with Tiger. the moment i upgraded, hit and miss errors. i'm bounced off my own router about every 5 minutes or so. but on some days, no worries. extremely annoying and interrupts my workflow when discussing things via chat.
i found ONE piece of information saying that Leopard has major problems with G routers which i learned mine is and that only N routers running at 5 Ghz work.
so, that's what i know. i can't switch from Comcast.
any thoughts?
thanks in advance. you are always SO helpful! helped me 3 years ago!!!

"AIM error. An AIM service error occurred. Error: Serv:RequestTimeout" wha?

i got this message,"AIM error. An AIM service error occurred. Error: Serv:RequestTimeout" and it happens every time i try and IM someone. anyone have any idea why? also...im new to ichat -- and am used to AIM. don't really understand it...therefore right now...don't like it. but im sure once i get the hang of it, i will...

Go to the iChat Menu > Preferences > Accounts > Server Settings and whilst Logged out of AIM change the port to 443 and then Log in to AIM.
10:22 PM Wednesday; August 6, 2008

An AIM service error occurred. Error: Serv:RequestTimeout

basically what title says, i send an im to a friend and this is what pops up
did the port changing didnt work
did the deleting aim.plist thingy didnt work
dont know where to go
ichat4.0.8

Hi,
So, now you have tried it with SSL on and Off and on Port 443 as well as port 5190.
You have tried deleting your screen Name from ichat and Re-adding it.
You have tried deleting the .plist
Have you tried restarting the computer ?
6:57 PM Monday; March 21, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Sharepoint FBA web application error: Server Error in '/' Application. when login to the web application

Hello Team,
I have configured FBA in SharePoint 2010. After the FBA i can get the SQL users using people picker and added users as a site collection admin.
When i tried to access the site, it shows login page and i have given user name and password then pressed signin button, it's try to redirect the another page and showing below error,
Server Error in '/' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed.
Details: To enable the details of this specific error message to be viewable on the local server machine, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "RemoteOnly". To enable the details to be viewable on remote machines, please set "mode" to "Off".

<configuration>
<system.web>
<customErrors mode="RemoteOnly"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
<system.web>
<customErrors mode="On" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
"An exception occurred when trying to issue security token: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.19 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'..
I checked sharepoint logs and didn't see any log. but i can see below error logged in Event viewer application logs,
I tried changing all customErrors mode and still same error.
Kindly help me on this, how to resolve the issue.
Thanks in advance.
JP

Hi,
According to your description, my understanding is that the error occurred when you accessed SharePoint site through form based authentication.
How did you configure the form based authentication?
Here is a link about the steps required to configure FBA in SharePoint 2010 for your reference, and check the steps to see if there anything wrong in your configuration:
http://www.codeproject.com/Articles/352841/How-to-Configure-Form-Based-Authentication-FBA-in
Through the common error message, we cannot find what exactly caused the error.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/120ab535-63d2-4205-a51f-1987e9c0cf79/sharepoint-fba-the-content-type-texthtml-charsetutf8-of-the-response-message-does-not-match-the?forum=sharepointgeneralprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Msg 8631 Internal error: Server stack limit has been reached on SQL Server 2012 from T-SQL script that runs on SQL Server 2008 R2

I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, Programmer

Hi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support

Sending an Email via ColdFusion as a Service leads to ActionScript-Error "Server is undefined to setup the connection"

Hi,
Ben Forta shows in his video "ColdFusion9 exposed as Flex Services" how to send an Email using ColdFusion as a Service.
I tried out this example with Flashbuilder4 Beta2 but I got the following ActionSript-Error:
Error: Server is undefined to setup the connection
    at coldfusion.service::BasicService/initializeConnection()[D:\p4\depot\ColdFusion\cf_main\to ols\AIRIntegration\Services\src\coldfusion\service\BasicService.as:278]
    at coldfusion.service::BasicService/call()[D:\p4\depot\ColdFusion\cf_main\tools\AIRIntegrati on\Services\src\coldfusion\service\BasicService.as:226]
    at coldfusion.service.mxml::Mail/execute()[D:\p4\depot\ColdFusion\cf_main\tools\AIRIntegrati on\Services\src\coldfusion\service\mxml\Mail.as:370]
    at CFaaS/button1_clickHandler()[C:\Dokumente und Einstellungen\walter\Adobe Flash Builder Beta 2\CFaaS\src\CFaaS.mxml:18]
    at CFaaS/___CFaaS_Button1_click()[C:\Dokumente und Einstellungen\walter\Adobe Flash Builder Beta 2\CFaaS\src\CFaaS.mxml:93]
Who has an idea what to do?
Thanks in advance,
Walter

Hi,
We tried this out and it works like a charm
Actually even we hit the issue you have mentioned but on further investigation we could get things working.
Please follow these settings, we are not sure if you have done all of these:
a) In CF9 administrator, under Mail section please type your server name, username and password. Check the ' Verify mail server connection'
checkbox and click 'Submit Changes'. Make sure you get the message 'Connection Verification Successful'.
b) Under Security-> 'User Manager' section in CF9 administration, add an user using 'Add User' with the following info:
username, password, confirm password , check both RDS and administrative access and add 'Exposed Services' by selecting the required services.
eg: Mail Service and click 'Add User'.
c) Go to 'Security->Allow IP Address in CF9 administrator and enter your IP address and say 'Add'.
d) After add the following tag in addition to CF:Mail,
<cf:Config cfServer="" cfPort="8501" servicePassword="" serviceUserName="" />(the values entered here should be same as the ones configured under 'Add User' and 'Allow IP address' section).
Please find attached the mxml file (TestCF.mxml) which has the Flex code.
Also, add the 'CFService.swc' into your project. Go to Project->Flex Build Path->Add SWC and point to D:\ColdFusionCentaur\wwwroot\CFIDE\scripts\air (subject to CF9 installed location).
Please try the workflow by following these steps and let us know if things work fine
Thanks,
Balaji
http://balajisridhar.wordpress.com

While viewing a page I suden get "Oops! This page appears broken. DNS Error - Server cannot be found." However I can back arrow to the page

I just upgrade to versions 18.0.1. I am suing Window 7 64 bit.
Now I while I am viewing a page I suddenly receive the error massage "Oops! This page appears broken. DNS Error - Server cannot be found."
I can use the back arrow key to bring the paper back.
If I have several tabs open, I can watch one tab after another change from the page name, It doesn't seem to matter who page it is, Yahoo, Washington Post, NBCNews,

I am not a techie. I keep 15-20 to tabs open at a time for reference while working. When I upgraded to this version, all my tabs were closed and my history was erased. I still have not recovered from that loss. I do not want to have this repeated!
If I was using pdfforge extension (what ever that is) before the upgrade, why is it venomous now?
Besides this issue, since upgrading I suddenly starting having the audio from commercials being played from tabs that are not active (open). I now have to leave my audio muted.
I expected assistance from Firefox not some unknown individual ( iamjayakumars) who for all I know is a troll trying to get me to do something to expose my computer to attack.
I allowed Firefox to collect data they needed from my computer when I submitted the question.
Fix the bug in your program! I have used Firefox since it came out. I am within a hairs width of switching browser. The only thing holding me with Firefox is my bookmarks. If I figure out how to export them, I am gone.
FIX YOUR BROWSER!!!

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error - Server file should not be empty- while uploading Text files in RAR

Hi,
We are uploading SU24 text files but we are getting the error "Server file should not be empty" while uploading the Description files in RAR 5.3
We followed the same naming covention and also used UTF-8 format for the text files. We placed the file in our Desktop as well and tried uploading into RAR - but still the same error is being thrown?
Are we missing something here?
Thanks and Best Regards,
Srihari.K

Hi and thanks to the answers so far.
I forgot to mention some points :
- I'm using forground import
- we are trying to use RAR to run risk analysis on non-sap systems as well as SAP (single or cross-systems).
So the file I'm trying to upload does not come from a SAP backen, but was created from scratch.
However the data in the files are coherent (and I compared with a SAP extraction, the format is the same)
here is a sample of the file I try to upload : (an that is actually what I'm trying to import as a test file)
sap_auth.txt:
OEITIAC     GTIAC     SEL     1
OEITIAC     GTIAC     MOD     1
OEITIAC     GTIAC     INS     1
OEITIAC     GTIAC     SUP     1
each element (ACT/PRM/FLD/VAL) is defined in the sap_desc.txt file that I loaded first (without error).
note that each column is separated by a single TAB (with an empty column at the end of each line).
each line is terminated by a CR/LF
I tried UTF-8 with and W/O BOM
Regards,

Error while trying to restore ipad from icloud backup "Connection Error - server error apple id couldnt be created"

after updating to ios 6.1.2 ipad2 ended up in restore mode, i have restored it and now i need this morning's the backup that's only on icloud
but after i login (succesfully) and acept terms & condition popups an error "Connection Error - server error: apple id couldnt be created" or "impossible to login there has been a problem while connecting with server" when it should start setting up the ipad.
any clues on whats going on? i really need this backup. what can i do? there is any other way to restore using the icloud backup from somewhere else?
thanks

https://discussions.apple.com/message/19556552#19556552
Level 1 (0 points)
brandonfromhenderson
This solved my questionRe: Apple ID couldn't be created because of a server error when i try to restore from a backup 13-sep-2012 9:49 (in response to brandonfromhenderson)
Found the solution! Go To Appleid.apple.com and set your birthday and other questons..

Error: Server BALAHSAN01:6400 not found or server may be down (FWM 01003)

Hi All,
I am a beginner with BO.
I installed BOE (Version XI 3.0) on my machine. Just after the installation, all the tools were ok.
After logging out of windows, I have the error "Error: Server BALAHSAN01:6400 not found or server may be down (FWM 01003) null" when I try to connect to the CMC or InfoView.
My configuration is : Windows XP SP2. I'm using MySQL5 and Tomcat. ports have not been changed.
Note : my server is the localhost (no firewall!). MySQL5 does work.
Do you see any reason to this?
Thanks,
Daniel
N.B: I've seen the discussions for this error in the forum, but the configurations were not the same ones (remote servers...)

This forum is dedicated to general topics related to Business Objects solutions not actual technical queries.
Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Error: Server (myserver):6400 not found or server may be down (FWM 01003)

Hi
I installede BOE in a Server, Just finish the installation I want launch the CMC, but i can access, i have this error u201Cu2022 Error: Server myserver:6400 not found or server may be down (FWM 01003) nullu201D
I install Business Objects XI R3.0 and Tomact, on Windows Server 2003 R2 Standar Edition SP2 and the repository is Microsoft SQL Server Express Edition.
Does anyone have any idea that might be? thanks

Please post this query to the Business Objects Enterprise Administration forum:
BI Platform
That forum is monitored by qualified technicians and you will get a faster response there. Also, all BOE queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Ludek

Error: Serv:RequestTimeout

Similar Messages

Maybe you are looking for