Error:Service Registyr Configuration PI 7.11

Hi All,
After upgrading Pi 7.1 tp EHP 1 ,we are facing issue in Service Registry.
Followed the steps in this help.sap link http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/0f7e2c1c644992a195d38cfec1b1f2/frameset.htm
Only differnce is that configuration procedure says to open ServicesRegistrySiPort but when i am goign to NWA->SOA->Application and Scenario Communication Single Service Administration
There undr Consumer Proxies when looking for ServicesRegistrySi the config name fo rhti ssevice is ServicesRegistrySi (default) and not ServicesRegistrySiPort
Secodly,have added UDDI Server settings as Discovery URL host as FQDN hostname of PI server ..
Now when i am gooign to WS Navigator and clicking on Service Registry or goign to this Url http://hostname:port/sr_central system si throwin the below error
========
The initial exception that caused the request to fail, was:
java.rmi.RemoteException: TransportBindingException during request to UDDI Invalid Response code (401). Server returned message
Or
javax.xml.ws.soap.SOAPFaultException: javax.ejb.EJBException: (Failed in component: sap.com/tcesiuddisrwsear) Exception raised from invocation of public com.sap.esi.uddi.sr.api.ws.PhysicalSystemListType com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean.findPhysicalSystems(com.sap.esi.uddi.sr.api.ws.PhysicalSystemSearchAttributesType) throws com.sap.esi.uddi.sr.api.ws.FindPhysicalSystemsFault,com.sap.esi.uddi.sr.api.ws.ServicesRegistrySifindPhysicalSystemsFault1,com.sap.esi.uddi.sr.api.ws.ServicesRegistrySifindPhysicalSystemsFault,com.sap.esi.uddi.sr.api.ws.ServicesRegistrySifindPhysicalSystemsFault12 method on bean instance com.sap.esi.uddi.sr.api.ws.ServicesRegistrySiImplBean@61838523 for bean sap.com/tcesiuddisrwsearannotation|tcesiuddisrws~ejbm.jarannotation|ServicesRegistrySiImplBean in application sap.com/tcesiuddisrwsear.; nested exception is: javax.ejb.EJBTransactionRolledbackException: (Failed in component: sap.com/tcesiuddisrear) Exception raised from invocation of public com.sap.esi.uddi.sr.api.types.PhysicalSystemList com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean.findPhysicalSystems(com.sap.esi.uddi.sr.api.types.PhysicalSystemSearchAttributes) throws com.sap.esi.uddi.sr.api.exceptions.SRException,com.sap.esi.uddi.sr.api.exceptions.SRAuthenticationException,com.sap.esi.uddi.sr.api.exceptions.SRConnectionException,java.rmi.RemoteException method on bean instance com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean@39c7a297 for bean sap.com/tcesiuddisrear*annotation|tcesiuddisrimplejbm.jarannotation|ServicesRegistryFacade in application sap.com/tcesiuddisrear.; nested exception is: java.rmi.RemoteException: TransportBindingException during request to UDDI Invalid Response code (401). Server returned message .; nested exception is: javax.ejb.EJBException: (Failed in component: sap.com/tcesiuddisrear) Exception raised from invocation of public com.sap.esi.uddi.sr.api.types.PhysicalSystemList com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean.findPhysicalSystems(com.sap.esi.uddi.sr.api.types.PhysicalSystemSearchAttributes) throws com.sap.esi.uddi.sr.api.exceptions.SRException,com.sap.esi.uddi.sr.api.exceptions.SRAuthenticationException,com.sap.esi.uddi.sr.api.exceptions.SRConnectionException,java.rmi.RemoteException method on bean instance com.sap.esi.uddi.sr.impl.ejb.ServicesRegistryBean@39c7a297 for bean sap.com/tcesiuddisrearannotation|tcesiuddisrimplejbm.jar*annotation|ServicesRegistryFacade in application sap.com/tcesiuddisr~ear.; nested exception is: java.rmi.RemoteException: TransportBindingException during request to UDDI Invalid Response code (401). Server returned message .
============
Pls suggest.
Regards
Ajay

It should be courtesy to the sdn-community to share youre answer.
I have the same problem right now, what is the answer?
Thanks
hs

Similar Messages

Error Service Provider Configuration

Hi
When I try to save the configuration of the service provider, I'm getting the following error message:
Warning: you must define an appropriate mapping from Account Attribute "xml" for the selected resource. If "Compress XML User" is selected, the attribute must be binary.
Directory Configuration:
User Service Provider Directory: LDAP
Attribute ID Account Name: account
Someone could help me with this error message please
Best regards

Hi All,
I have managed to fix this error. I was not able to see folder "localidp" in the mentioned directory. However, folder was present, but it was not visible. So I manually navigated to server configuration in workspace and copied Metadata XML there and refreshed the folder structure in Eclipse, and I was able to see the folder.
Now I can see a custom IDP being referred!
Ameya

"error loading service Service Document configuration"--visual adminitrator

In visual Administrator , ( j2ee engine---> ADS configuration ) While selecting under cluster->server->service->Document service configuration,i received error like this "error while loading service Service Document configuration".Kindly help me if anyone know the solution for this issue.
Regards,
S.Ramesh Kumar

Hello,
I solved this problem by restarting J2EE and the Server.
Regards
Gregor

Errors in LDAP configuration with Shared Services

Dear sirs,
we are getting errors in LDAP configuration with Shared Services.
Base DN is ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo East
The group cn is cn=AH
In LDAP log you can see the applications is searching the group:
"ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo"
When it should be:
“ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo East”
We think the problem is with space in Base DN "o=Grupo East", it is not properly considered.
Error Codes
EPMCSS-05145
Thanks in advance

Hi.
Could you try to define the Base DN as :
ou=Grupos,cn=East,o=SSGH,c=br,o=Grupo\ East
I don't know if will work fine.. but you can use special characteres using with the "\"
Good luck.
Best regards!

Windows Azure Pack setup - 500 Internal Server Error - failed to configure databases and services

Hi,
I am trying to setup the Windows Azure pack to use the site to configure the Service bus 1.1 installation. When I try to configure the Windows Azure Pack I get the following error:
Admin Authentication Site
500 Internal Server Error - Failed to configure databases and services: Object reference not set to an instance of an object.
I'm not sure where the logs are to see what is causing this error. I have tried running as admin, running as a different user with no luck.
thanks,
Georgi
Georgi

Here's what I'm getting for this error:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite
Date: 3/27/2014 12:52:03 PM
Event ID: 103
Task Category: (65431)
Level: Error
Keywords: None
User: CLINICALSYSTEMS\Administrator
Computer: SERVER-PC.clinicalsystems.com
Description:
##### Application_Error: Exception=System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not
set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite" Guid="{1F742CC8-BDAA-56B6-A4B8-49F946D19CD1}" />
<EventID>103</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65431</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-03-27T16:52:03.223741300Z" />
<EventRecordID>111</EventRecordID>
<Correlation />
<Execution ProcessID="8068" ThreadID="7680" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-ConfigSite/Operational</Channel>
<Computer>SERVER-PC.clinicalsystems.com</Computer>
<Security UserID="S-1-5-21-3021050346-1670805799-1320812125-500" />
</System>
<EventData>
<Data Name="exceptionInfo">System.Web.HttpException (0x80004005): Failed to configure databases and services: Object reference not set to an instance of an object. ---> System.Management.Automation.CmdletInvocationException: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.AddUserToGroup(GroupPrincipal group, UserPrincipal user)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureDefaultTrusts()
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureClaimSecurity(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.CustomTokenServiceConfigurer.ConfigureCore(Hashtable settings)
at Microsoft.WindowsAzure.Config.PowerShell.Configurer.FeatureConfigurer.Configure(Hashtable settings)
at Microsoft.WindowsAzure.Server.PowerShell.Common.BaseCmdlet.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at System.Management.Automation.Runspaces.PipelineBase.Invoke(IEnumerable input)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.PSClient.RunCommand(Command command)
at Microsoft.MgmtSvc.Config.Controllers.PowerShell.ConfigurationPSClient.InitializeFeature(String name, Hashtable settings)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<>c__DisplayClass3.<ConfigureFeature>b__0()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
at Microsoft.MgmtSvc.Config.Controllers.ConfigurationController.<ConfigureFeature>d__5.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)
at System.Web.Mvc.Controller.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.Mvc.MvcHandler.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar)
at System.Web.HttpApplication.CallHandlerExecutionStep.OnAsyncHandlerCompletion(IAsyncResult ar)</Data>
</EventData>
</Event>
Kori Francis Lead Software Developer Clinical Support Systems, Inc.

Messages button giving "Service not configured" error

Hi,
I have created my voice mail ports, LG,HL and HP. I also created voice mail pilot and profile, assigning the pilot to profile and then assigning profile to the line of the IP Phone.
I can dial the pilot number and voice mail port numbers, but when I push the "Messages" button on the IP Phone, I get service not configured. I looked at enterprise parameters for messages and noticed that the URL was missing. Can someone post what the URL should be for messages under enterprise parameters?
Any other ideas as to why I am getting this error?
Cheers

Did anyone find the answer to this issue?
I have a similar issue with a differrent service (one button login for ipcc).
When I hit the services button on my physical 7965 phones it states no services are configured.
If I press the services button on my CIPC softphone it works fine.
The 7965 is connected to a 3560 switch and a 2811 router.
The configuration is exactly the same for both phones and both phones are subscribed to the service.
All help will be greatly appreciated.

Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration

When I try to start Windows installer in Services.msc, it gives me this error Error 1297 A privilege that the service requires to function properly does not exist in the service account configuration. How do I fix this? I am running Windows 7 ultimate.

Hi,
Based on the error code, we can use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration for Windows Installer service.
Besides, the following two threads focus on the similar issue and can be referred to as reference.
Error 1297: "ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE 1297” FTP service in Windows 7 computer
http://social.technet.microsoft.com/Forums/windows/en-US/52329b48-1ba9-4cab-a6b2-efd8db173625/error-1297-errorincompatibleserviceprivilege-1297-ftp-service-in-windows-7-computer?forum=w7itpronetworking
Service fails to start, error 1297 and 7000
http://social.technet.microsoft.com/Forums/windowsserver/en-US/419ba006-4413-4036-8c49-252b08593131/service-fails-to-start-error-1297-and-7000?forum=winserverDS
Hope it helps.
Best regards,
Frank Shen

Oracle Service Bus Configuration Project error

When I invoked New Project -> Oracle Service Bus Configuration Project wizard the following problem occurred:
The selected wizard could not be started.
Plug-in "com.bea.alsb.ui" was unable to instantiate class "com.bea.alsb.ui.wizards.NewALSBContainerWizard".
Google search found discussions that date back a year or so, but nothing helpfull.
Used Oracle generic installtion for 64 bit envirnment.
Here is the list of packages and version summary...
jre-6u27-windows-x64.exe
jrockit-jdk1.6.0_26-R28.1.4-4.0.1-windows-x64.exe
wls1035_generic.zip
oepe-helios-all-in-one-11.1.1.7.2.201103302044-win32-x86_64.zip
ofm_osb_generic_11.1.1.5.0_disk1_1of1.zip
OS
windows 7
JRE - Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
JDK - Oracle JRockit(R) (build R28.1.4-7-144370-1.6.0_26-20110617-2130-windows-x86_64, compiled mode)
Oracle 10.2.0
OFM 11g R1
WebLogic 10.3.5.0
OSB 11.1.1.5
OEPE 11.1.1.7.2.201103302044 (Eclipse Version: 3.6.2 Build id: M20110210-1200)

I think your best bet would be to ask this question on the OSB forums.
https://community.oracle.com/community/developer/english/fusion_middleware/soa_%26_process_management/soa_suite_3
Thanks,
Greg

Error while deploying configurable sku

Error while deploying configurable sku in BCC server when i give ready for review and all it gives and INFO msg as
Can't find display name resource and price in bundle and finally when i give accept for deployment the following error displayed .Please help me to resolve it thanks in advance waiting for your reply soon.
12:38:11,828 ERROR [DynamoServlet]
java.lang.NullPointerException
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:382)
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:441)
at atg.bizui.taglib.GetProcessURLTag.doStartTag(GetProcessURLTag.java:1
6)
at atg.bizui.taglib.elwrap.GetProcessURLTagWrapper.doStartTag(Unknown S
urce)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspx_meth_b
z_005fgetProcessURL_005f0(getTasks_jsp.java:1615)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspService(
etTasks_jsp.java:359)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.servlet.ServletUtil.invokeInclude(ServletUtil.java:3552)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:757)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
dspel005finclude_005f0(getProjects_jsp.java:1192)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fif_005f5(getProjects_jsp.java:1119)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fforEach_005f0(getProjects_jsp.java:1077)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fwhen_005f1(getProjects_jsp.java:1036)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fchoose_005f1(getProjects_jsp.java:1000)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspServi
e(getProjects_jsp.java:244)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:780)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspx_meth_dspe
_005finclude_005f0(index_jsp.java:2712)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspService(ind
x_jsp.java:381)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)

Error while deploying configurable sku in BCC server when i give ready for review and all it gives and INFO msg as
Can't find display name resource and price in bundle and finally when i give accept for deployment the following error displayed .Please help me to resolve it thanks in advance waiting for your reply soon.
12:38:11,828 ERROR [DynamoServlet]
java.lang.NullPointerException
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:382)
at atg.bizui.activity.ActivityManager.getProcessInfo(ActivityManager.ja
a:441)
at atg.bizui.taglib.GetProcessURLTag.doStartTag(GetProcessURLTag.java:1
6)
at atg.bizui.taglib.elwrap.GetProcessURLTagWrapper.doStartTag(Unknown S
urce)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspx_meth_b
z_005fgetProcessURL_005f0(getTasks_jsp.java:1615)
at org.apache.jsp.portlets.ProjectTodoPortlet.getTasks_jsp._jspService(
etTasks_jsp.java:359)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.servlet.ServletUtil.invokeInclude(ServletUtil.java:3552)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:757)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
dspel005finclude_005f0(getProjects_jsp.java:1192)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fif_005f5(getProjects_jsp.java:1119)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fforEach_005f0(getProjects_jsp.java:1077)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fwhen_005f1(getProjects_jsp.java:1036)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspx_met
c005fchoose_005f1(getProjects_jsp.java:1000)
at org.apache.jsp.portlets.ProjectTodoPortlet.getProjects_jsp._jspServi
e(getProjects_jsp.java:244)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(Application
ilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDis
atcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.doInclude(Application
ispatcher.java:543)
at org.apache.catalina.core.ApplicationDispatcher.include(ApplicationDi
patcher.java:480)
at atg.servlet.WrappingRequestDispatcher.include(WrappingRequestDispatc
er.java:94)
at atg.taglib.dspjsp.IncludeTag.doEndTag(IncludeTag.java:780)
at atg.taglib.dspjsp.elwrap.IncludeTagWrapper.doEndTag(IncludeTagWrappe
.java:41)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspx_meth_dspe
_005finclude_005f0(index_jsp.java:2712)
at org.apache.jsp.portlets.ProjectTodoPortlet.index_jsp._jspService(ind
x_jsp.java:381)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrappe
.java:369)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:
22)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:249)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(App
icationFilterChain.java:290)

Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard

am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.

Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu

E-Commerce Catalog error and log configurator probelm?

Hello,
I am trying to browse a B2B shop (http://server:port/b2b/b2b/init.do) in CRM 5.0 and getting following error message:
The catalog that you have selected is currently unavailable; try again later
I am using CRM 5.0 System (IDES Client) and basically trying to setup a E-Commerce development environment.
Following are the steps i have done so far for E-Commerce configuration:
1. Configured ISADMIN (http://server:port/isauseradm/admin/xcm/init.do).
1.1 Changed following params for Start->General Application Settings->Customer->isauseradm->isauseradmconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
>> AddUserToPartner: true
>> AcceptExistingUser: true
1.2 Created a new JCo connection under Start->Components->Customer->jco and entered my back end CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
1.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_ISAUSERADMSTD:
>> Base configuration: isauseradmStandard
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
>> backendtype: crmdefault
>> usertype: CRM_Standalone
>> uidata: default
2. Configured B2B (http://server:port/b2b/admin/xcm/init.do).
2.1 Changed following params for Start->General Application Settings->Customer->b2b->b2bconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
2.2 Created a new JCo connection under Start->Components->Customer->jco and entered my backend CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
2.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_B2BCRMSTD:
>> Base configuration: b2bcrmstandard
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
>> usertype: CRM_Standalone
3. I was really not sure if ShopAdmin config is required or not but i did it. Configured SHOPADMIN (http://server:port/shopadmin/admin/xcm/init.do).
3.1 Changed following params for Start->General Application Settings->Customer->shopadmin->shopadminconfig:
>> SSLEnabled: false
>> appinfo: true
>> show start.jsp: true
3.2 Created a new JCo connection under Start->Components->Customer->jco and entered my backend CRM System details and saved it as CRM_800_JCO. I also did Run Test which was successful.
3.3 Created a new JCo connection under Start->Application Configurations->Customer and entered following params and saved it with name CRM_800_CRMSHOP:
>> Base configuration: crmshop
>> default configuration: X
>> active configuration: X
>> jcodata: CRM_800_JCO
4. Restarted CRM J2EE.
5. Setup TREX 7.0.
5.1 From TREX Administration, created a new connection (Type A, i.e., using System Number and Application Server Host) for CRM System and also RFC Dest. (sm59) in CRM System.
5.2 Restarted TREX and connected this connection.
5.3 Following are the visible column values for this connection in TREX Administration:
>> Connection Status: <connected>
>> Configuration Satus: Green
>> SAP System: CRM
>> RFC Destination: TREX_DEFAULT
>> Gateway: local
>> RfcServer Instances: 1 (no automatic changes)
>> TREXRfcServer Processes: 1
>> Workprocesses: 6 (4 DIA, 2BGD)
5.4 Did a RFC Connection test in CRM System using SM59 which was successful as well.
5.5 Using Transaction SRMO (Retrieval : Search Server Relation Monitor) in CRM System changed the RFC Destination for Search server ID DRFUZZY (for both I and S type RFC Server destination action) to TREX_DEFAULT. Did a connection test for this and it was successful.
6. Initiated Replication using transaction COMM_PCAT_IMS_INIT with following params:
>> Product Catalog: PCSHOP
>> Variant: VAR_EN
>> Search Server Relation: DRFUZZY
>> Publishing Computer ID:
>> Allows Parallel Processing:
>> Publish Documents via HTTP:
>> Transfer Document Content: X
>> Package Size of Indexing: 5,000
>> Processing Existing Indexes: Overwrite Index Only When OK
>> Behavior when Error Messages Occur: Cancel Variant Replication
7. Logged into ISADMIN User Config (http://server:port/isauseradm/useradmin/init.do) and created a new user using the option New User and New Contact Person with an existing company of type Sold-To Party and which belongs to the sales area that is linked with PCSHOP Product Catalog (from IDES data).
Now, when i log into B2B Page (http://server:port/b2b/b2b/init.do) using the newly created user and click on the shop PC4BIZ_EN i get following error message:
The catalog that you have selected is currently unavailable; try again later
I also created a new Product Catalog and did the Initial Replication still getting the same above error message.
Can anyone please tell me what am i missing or what mistake i have done?
I even restarted CRM System, but the result is still the same.
Also, how do i check the log files for B2B? I checked the E-Commerce Admin Console (http://server:port/b2b/admin/index.jsp) and clicked on the logging link, but i get the following message:
Logging is now configured centrally in the J2EE Engine Visual Administrator (server service: Log Configurator)
How exactly do i configure and what is the right path for B2B Logging in J2EE Visual Administrator? And where will the log files for B2B be stored on the server?
I would really appreciate (and of course award points) for your help on this.
thanks and regards,
Vasu

Thanks for the Note reference. I will go through it now and try to check the log files.
And regarding the error message i don't think it could be because of The Catalog variant is not set right in the Shopadmin application as all the values in Shopadmin seem to be correct. Anyhow following are the current values selected for the custom Product Catalog I created:
Shop Id: ZTEST
General Information
--> Usage
> Business Scenario: Internet Sales B2B
--> Authorizations
> Authorization Group: <blank>
--> User Administration
> Partner Function Contact Person: 00000015
> Country Group: <blank>
--> Billing Documents
> Display of Billing Documents: No Billing Documents
--> Store Locator
> Display Store Locator: <blank>
Catalog
--> Product Catalog
> Catalog Search: <blank>
> Catalog: ZTEST
> Catalog Variant: VAR_EN
> Catalog View: <blank>
> Hide Internal Catalog: <blank>
> Controlling Price Determination in the Catalog: via IPC
> Profile group for pricing related attributes for exchange products: <blank>
Transactions
--> General
> Allow transaction management for other business partners in hierarchy: <blank>
> Large Documents: Display All Items
> Document type can be chosen late: <blank>
> Batch Processing Permitted: <blank>
> Display product determination information: X
--> Order
> Choose Order Types: Order Type
> Order Type: ISBB
--> Order Template
> Order Templates Allowed: X
> Order Type: ISBB
--> +Quotations
> Creating a Quotation: No Quotation
--> Contracts
> Contract Determination: <blank>
--> Contract Negotiations
> Allow Contract Negotiations: <blank>
Marketing
--> Global Product Recommendation
> Display Global Product Recommendation: <blank>
--> Personalized Product Recommendation
> Display Personalized Product Recommendation: <blank>
--> +Product-Related Proposals +
> Display Product-Related Proposals: <blank>
--> +Campaigns +
> Allow manual entry of campaigns: <blank>
Auction
--> Auction
> Auctions allowed: <blank>
Regarding the reason "The Catalog was not replicated properly and is hence unavailable on TREX", is there any way to verify this? When i ran Initial Replication (transaction COMM_PCAT_IMS_INIT with the values i said in my first post) everything was green.
Also, how do i clear the Catalog Cache? Is it the same as clearing the Catalog Cache Statistics in E-Commerce Administration Console (http://server:port/b2b/admin/index.jsp)?
Thanks and Regards,

An error occurred while configuring server as a directory server. Please check your network configuration and try again.

Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
    Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
        "Creating Open Directory master"
    ), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
Kim

Had the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

Error in Proxy configuration with SLM

> Hello Experts,
>
> I am encountring some problems when configuring SLM with Solution Manager 7.01 SP06. I have applied all the settings required for SLM and described on the How-To documentation. I have also read all the forums regarding this issue, but nothing helpful. This issue is the configuration of the proxy settings. We are using SNC for our Saprouter, so I assume that I have to use also the sapserv3 for SLM configuration, with the port 8080.
>
> I have added also these entries on Web Service Container in VA:
> Proxy Host: sapserv3
> Proxy Port: 8080
> Exclude List: myhost.mydomain
> And Save
>
> When I execute the configuration check with the transaction "/n/tmwflow/mopzcfg", I have these errors:
>
> <description>Check Proxy settings for download</description>
> + <config-path>
> <entry>Configuration path: SDT/SDT|cod-zeus|PS1/SDTExecutionService/DOWNLOAD</entry>
> </config-path>
> - <input>
> <entry>Proxy use: true</entry>
> <entry>Proxy host: sapserv3</entry>
> <entry>Proxy port: 8080</entry>
> <entry>Use proxy authentication: false</entry>
> <entry>Check HTTP connection to: http://www.sap.com/index.epx</entry>
> </input>
> - <output>
> <entry>Test Result: FAILED</entry>
> </output>
>- <error>
>- <MESSAGE>
> <ID>java.net.UnknownHostException: BAEx.Failed</ID>
> <CREATOR>SLM: java.net.PlainSocketImpl: Line: 201</CREATOR>
> <TEXT>www.sap.com</TEXT>
> </MESSAGE>
> </error>
> </CheckResult>
> - <CheckResult status="FAILED">
> <description>Check Proxy settings for web services</description>
> - <config-path>
> <entry>Configuration path: WebServicessAddOn/HTTPProxy</entry>
> </config-path>
> - <input>
> <entry>Proxy use: true</entry>
> <entry>Proxy host: sapserv3</entry>
> <entry>Proxy port: 8080</entry>
> <entry>Check HTTP connection to: http://www.sap.com/index.epx</entry>
> <entry>Set Proxy-Authorization</entry>
> </input>
> - <output>
> <entry>Proxy user:</entry>
> <entry>Test Result: FAILED</entry>
> </output>
>- <error>
>- <MESSAGE>
> <ID>java.net.UnknownHostException: BAEx.Failed</ID>
> <CREATOR>SLM: java.net.PlainSocketImpl: Line: 201</CREATOR>
> <TEXT>www.sap.com</TEXT>
> </MESSAGE>
> </error>
> </CheckResult>
> - <CheckResult status="FAILED">
> <description>Check SMP user and SP web service</description>
>
> Configuration path: SDT/SDT|host|sid/SDTExecutionService/DOWNLOAD
>
> please tell me what should I do. Thank you
Edited by: sapmoo on May 7, 2010 11:59 AM

is Done...
I have changed the 8001 Port, by 50100... :S
this is my First Client with both instances in a same Server than I have to use this port... always I have used 800 + number of Instance...
Regards

Service Registry configuration

Hi,
I am getting below error while publishing in service registry ""could not establish connection to service registry, configure connection to service registry in SAP netweaver and try again
Thanks

Note 1267817 - Configure Services Registry proxy (ServicesRegistrySi) for this configuration
Thanks

Error:Service Registyr Configuration PI 7.11

Similar Messages

Maybe you are looking for