Error service-specific error codce 2 when using Oracle 10g on Vista home

Dear All,
I just finished my WS1 DBA course and I wanted to play around with oracle 10g 10.2.0.3 DB on my laptop (Windows vista Home edition). I managed to install the database and right after the installation worked fine but the next day I got the following error message:
Windows could not start the oracledbconsoleorcl on local computer. For More information revie the system event log. if this is a non-microsoft service, contact the service vendor and refer to service-specific error codce 2
Any ideas why?
Thanks a lot in advance!

deltanov wrote:
Dear All,
I just finished my WS1 DBA course and I wanted to play around with oracle 10g 10.2.0.3 DB on my laptop (Windows vista Home edition). I managed to install the database and right after the installation worked fine but the next day I got the following error message:
Windows could not start the oracledbconsoleorcl on local computer. For More information revie the system event log. if this is a non-microsoft service, contact the service vendor and refer to service-specific error codce 2
Any ideas why?
Thanks a lot in advance!Maybe this conversation will help you
The specified item was not found.

Similar Messages

Infopath throws error "only specific pattern allowed" when use regular expression for validation in schema

This is MS info path question, I could not find specific forum for Info-Path So asking my question here
I am creating Info-Path form from schema. In the schema, the filename has restriction that it can only have extension .pdf or .PDF. But while filling out the form even if I type filename with extension ".pdf", I still see error "only
specific pattern allowed".
Below is my schema I used to create form
<?xml version="1.0" encoding="utf-8" ?>
<xs:schema elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Document">
<xs:complexType>
<xs:sequence>
<xs:element name="FileName" type="FileNameType"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:simpleType name ="FileNameType">
<xs:restriction base="xs:string">
<xs:pattern value="^.*\.(pdf|PDF)$"/>
<xs:minLength value="1" />
<xs:maxLength value="128" />
</xs:restriction>
</xs:simpleType>
</xs:schema>

Hi
This is the forum to discuss questions about Microsoft Office development. For your question, I recommend you post the question to the Answers forum for Infopath
Microsoft Community for InfoPath
By the way, you can get support from here. Support for Microsoft InfoPath
Thank you for your understanding.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle error ORA-00600 when using Oracle 10g and Sun One Web Server 6.1

I have a java application that was running under Solaris 8 and Oracle 9i. I am trying to get it up and running on a new server that is configured with Solaris 9 and Oracle 10g. Whenever the application tries to connect to the database it receives the following error: ORA-00600 [ttcgcshnd-1][0]. My research indicates that this is an internal Oracle error that represents a low level unexpected condition. I have looked through my configuration for the Web Server and I have not been able to determine the cause of this problem. My DBA tells me that we have the latest patch installed for Oracle! Has anyone encountered this problem before? Any help would be greatly appreciated!

If the problem is also present in a SWING app, i.e. outside the web server, then it is porbably something external to the webserver.
I think you should ensure that the driver and database are compatible with each other. It is very likely that you need a new jdbc driver for the new database.
download from here http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc101020.html
try the ojdbc14.jar

Issues with Installation Oracle 10g over Vista Home premium

Hi All,
I was trying to install Oracle 10g over my laptop which has Vista Home Basic Edition.
After the installation got completed, i got a prompt for Configuration of Net Services without which i was unable to connect to any of the database through the
sql prompt.
Can you just guide me through the steps for configuring the Net services so that i am able to login through sql prompt and connect to a database.
When ever i try loggin in, i am getting back an error as " No TNS listeners could be found."
Please guide me through the steps so that i am able to connect to the database.

Did you created the database with installation? If not then first try to create database with database configuration assistant.

Can we install Oracle 10g on Vista Home Basic Edition

Hi,
Please suggest me weather Oracle 10g is suitable in Window Vista Home Basic OS
or should I replace it with window XP

Dear UG!
It depends on what you want to do with your Oracle database. If it's only for developing and testing purposes then you might use Windows XP or Windows Vista. I would personally suggest you to use Windows XP because you need a special version of Oracle 10g for Windows Vista but if you plan to deploy an Oracle application on MS Server 2008 with Vista clients then you should use Windows Vista.
I don't know if this is really helpful but I hope so.
Yours sincerely
Florian W.

Service-specific error code 997 when starting up Oracle 9i service

Hi,
I have both Oracle 9i and 10g installed in a server. I've added 9i SID in 10g listner.ora. When I try to startup the 9i Oracle service in windows, I get "Windows could not start the 'service name' on Local Computer......If this is a non microsoft service, contact the service vendor, and refer to service-specific error code 997".
Server is Windows 2003 R2 Standard Edition SP1
Does anyone has a solution for this error?
Thanks,
listener.ora in 10g
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sgpdb1)(PORT = 1522))
SID_LIST_LISTENER10G =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = RACE)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IWK1010)
(ORACLE_HOME = F:\Oracle\Ora9201)
(PROGRAM = extproc)
sqlnet.ora in 10g
NAMES.DEFAULT_DOMAIN = world
SQLNET.AUTHENTICATION_SERVICES= NONE
NAMES.DIRECTORY_PATH= (TNSNAMES,EZCONNECT)
tnsnames.ora in 10g
RACE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = sgpdb1)(Port = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACE)
IWK1010.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SGPDB1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = IWK1010)
)

Here is the resutls. Pls note - startup/exit commands were not executed since did not connenct to sqlplus
C:\Documents and Settings\Administrator>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:03:54
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Log messages written to F:\Oracle\Ora10.2.0\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 0 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\Administrator>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 13 12:05:16 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:09:59
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 6 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl service
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:10:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully

Error when using oracle.j2ee.ws.StatelessJavaRpcWebService as ws wrapper

I have a problem when using Oracle oracle.j2ee.ws.StatelessJavaRpcWebService as a web service wrapper. I get the exception below in the server.log:
java.lang.IllegalStateException: Data has already been written to the OutputStream
     at com.evermind.server.http.EvermindHttpServletResponse.setBufferSize(EvermindHttpServletResponse.java:1965)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:541)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
The server response with 500 Internal Server Error when contacted as a web service.
The error only occurs patriotic on the server.
If anyone have experience with this error please response :-)

Hi,
can you point me to the "FSCM TUD" doc you follow so I can reproduce the issue ? Is it a JDeveloper tutorial? Also, which version of JDeveloper do you use ?
Frank

Oracle report server service returned service specific error 271

I setup Report 6i to start automatically as NT service in WinNT 4.0 server. Encountered the msg "The oracle report server <server name> service returned service specific error 271".
Can't find any documentations... can anyone please help? Thanks.
Joshua

Hi,
Only thing I can think of is that the User log-in may not have the priviledge to start a serice or some other OS related problem. Or check that you do not have any other service running under same name / or the same port. Workaround would be to use following command to start the Report server:
rwmts60 -listen "server_tns_name"You need to add an entry for the Report server in TNSNAMES.ORA file. Infact for first case also, please check is you have right entry in tnsnames.ora for the Reports Server service.
Thanks,
Rohit

"Service Specific error occured: 2" when trying to start Agent

Hello,
I have just installed the Grid Control via OUI on Windows. I can log into the EM, but I cannot get the agent to start.
Whenever I do emctl start agent, I get:
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Does anyone know what this error means?

I have set ORACLE_HOME to C:/OracleHomes/Agent10g
I still get the same message when trying to start the agent.

The oracle report server (rep60_ machine service returned service specific error 186

dear fellows i have installed 9i 1.2.0 on nt 4 sp5 machine
form is running ok but for report it say
Error: The requested URL was not found,
or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
when i go to services and try to start service for report
it gives me error
The oracle report server (rep60_<machine> service returned service specific error 186
i have created a service throu start program isuite net8easyconfig
and tested that service come with success
and then copied that tnsname to 806 net80 folder
but in no vain any help

I believe you'll need to edit your tnsnames.ora file located in \ORACLE\806\NET80\ADMIN. The last line of this file should read something like
Rep60_SYSNAME, Rep60_SYSNAME.world = (ADDRESS=(PROTOCOL=tcp) (HOST=SYSNAME) (PORT=1949))
where SYSNAME is the name of the PC Reports is installed on.
I had this same error, and once I modified this file, everything seemd to work fine.
Good Luck
[email protected]

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

Capturing error messages from Oracle EBS APIs when using Oracle Apps Adapter

We are using Oracle applications adapter to call Oracle EBS (both R11.5 and R12) APIs. I want to understand the best practice around error handling when using Oracle Apps Adapter to call Oracle EBS.
Here are some observations:
1. Most of the APIs return X_RETURN_STATUS and X_MSG_DATA containing the status and messages if any.
2. If the MSG COUNT is 1 then X_MSG_DATA contains the message, if MSG COUNT is > 1. X_MSG_DATA is empty.
We know that when calling the API directly from PL/SQL, we need to loop through FND_MSG_PUB to fetch all messages when there are more than 1. How do we achieve the same using Apps Adapter as Apps Adapter generates the PL/SQL block to call the API dynamically at runtime.
In some APIs, which have table/rec types as input or output parameters, Apps Adapter generates a wrapper package to do conversion from SQL--> PL/SQL and viceversa. In this case the adapter calls the custom package generated which internally calls the API. For these APIs we were able to put the logic to loop through FND_MSG_PUB and return a concatenated string as value of X_MSG_DATA.
But what should we do for the APIs which do NOT have a rec/table type as input or output, in which case the Apps Adapter directly calls the API and there is no intermediate custom package?
How are others handling this?

Please see the section "Handling Functional Errors" in the below link
Oracle Fusion Middleware Adapter for Oracle Applications User's Guide

Remote Desktop Management service not starting. service-specific error: %%2284126209 - Event ID: 7024

Hi Forum members,
We have a client that has intermittent issues with RDS on a 2012 R2 server.
As an overview of the environment, the client has a single VMWare host support 2 x Windows 2012 R2 VMs one is the File/Print/Email server and the 2nd is the RDS server used to allow the client to run MYOB Enterprise. Both servers have the AD DS role and
DNS roles amongst others.
The 1st issue is that the RD Connection Broker shows the error: "The server pool does not match the RD Connection Brokers that are in it. and then "1. Cannot connect to any of the specified RD Connection Broker servers".
The above issue seems to be caused by the RDMS service not starting. When you attempt to start it, the service stops and the error in the title is logged in the "System" event log. Full transcript below:
Log Name:      System
Source:        Service Control Manager
Date:          21/01/2015 4:50:32 PM
Event ID:      7024
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      intentionally removed.local
Description:
The Remote Desktop Management service terminated with the following service-specific error: %%2284126209
Event Xml:
<Event xmlns="
<System>
    <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
    <EventID Qualifiers="49152">7024</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T05:50:32.129949400Z" />
    <EventRecordID>53721</EventRecordID>
    <Correlation />
    <Execution ProcessID="568" ThreadID="12436" />
    <Channel>System</Channel>
    <Computer> intentionally removed.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">Remote Desktop Management</Data>
    <Data Name="param2">%%2284126209</Data>
    <Binary>520044004D0053000000</Binary>
</EventData>
</Event>
In addition in the "Application" event log, the following error is logged:
Log Name:      Application
Source:        MSSQL$MICROSOFT##WID
Date:          21/01/2015 5:24:47 PM
Event ID:      18456
Task Category: Logon
Level:         Information
Keywords:      Classic,Audit Failure
User:          NETWORK SERVICE
Computer:      intentionally removed.local
Description:
Login failed for user 'NT AUTHORITY\NETWORK SERVICE'. Reason: Could not find a login matching the name provided. [CLIENT: <named pipe>]
Event Xml:
<Event xmlns="
<System>
    <Provider Name="MSSQL$MICROSOFT##WID" />
    <EventID Qualifiers="49152">18456</EventID>
    <Level>0</Level>
    <Task>4</Task>
    <Keywords>0x90000000000000</Keywords>
    <TimeCreated SystemTime="2015-01-21T06:24:47.000000000Z" />
    <EventRecordID>4228336</EventRecordID>
    <Channel>Application</Channel>
    <Computer>intentionally removed.local</Computer>
    <Security UserID="S-1-5-20" />
</System>
<EventData>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data> Reason: Could not find a login matching the name provided.</Data>
    <Data> [CLIENT: <named pipe>]</Data>
    <Binary>184800000E0000001F00000055004E0047004500520045005200410055005300530056005200300033005C004D004900430052004F0053004F0046005400230023005700490044000000070000006D00610073007400650072000000</Binary>
</EventData>
</Event>
I have been attempting to resolve these errors for some time, without success. I have read the many KBs and forum entries related to the above and applied a number of the suggested fixes, including the one which suggests to add the NT SERVICE\ALL SERVICES
to the "Logon as a Service" in the "User Rights Assignment" of the "Default Domain Policy" which is linked to the domain level, that both servers are objects of.
My question to the forum is, can anyone come up with a solution to resolve the above issues and all the RDMS service to start which will then hopefully resolve the broker error?
Regards,
David West.

Hi David,
If virtual machines on the server are Windows Server 2012, then it is not supported to install Remote Desktop Connection Broker on a Domain Controller.
More information for you:
Remote Desktop Services role cannot co-exist with AD DS role on Windows Server 2012
http://support.microsoft.com/kb/2799605/de
Guidelines for installing the Remote Desktop Session Host role service on a computer running Windows Server 2012 without the Remote Desktop Connection Broker role service
http://support.microsoft.com/kb/2833839
If the VMs are Windows Server 2012 R2, I suggest you install RDS on a separate machine to see if the issue persists.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Report server failed service specific error 186

Gurus!
I am using oracle 9iAS enterprise,
Report server failed service specific error 186
Kindly help!

I believe you'll need to edit your tnsnames.ora file located in \ORACLE\806\NET80\ADMIN. The last line of this file should read something like
Rep60_SYSNAME, Rep60_SYSNAME.world = (ADDRESS=(PROTOCOL=tcp) (HOST=SYSNAME) (PORT=1949))
where SYSNAME is the name of the PC Reports is installed on.
I had this same error, and once I modified this file, everything seemd to work fine.
Good Luck
[email protected]

The Web Management Service service terminated with service-specific error %%-2147483640,

We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.

Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko

Error service-specific error codce 2 when using Oracle 10g on Vista home

Similar Messages

Maybe you are looking for