Error:Ship to party not defind for sales area

Dear Friends,
I created a material for sales area 1000/10/00.
The division that i assignes was 05 in MMD.
Now when i create a order the system gives a messege "ship to party 1033 not defind for sales area 1000/10/05, but at the order initial screen i had given sales area 1000/10/00.
Where is the problem?
regards
debasish

Extend or create the customer to the sales area 1000/10/05 or change the division in the material as" 01" then ur problem will solves.
Regards,
kishore.
Edited by: kishore gopala on May 13, 2008 1:12 PM
Edited by: kishore gopala on May 13, 2008 1:26 PM

Similar Messages

  • Ship-to party not defined for sales area

    Hi all,
    I am really confused while creating a sales order, I need your help.
    My sales org. - 1083, distribution channel - CY, Division - CW.
    When I enter va01, in the initial screen I enter the above details. Then it goes to the create sales order screen where I enter my customer details.
    After that, I enter my material number and quantity, it is giving me an error ship-to-party not defined for sales area 1084 CY and ZO ( other division) instead of 1084 CY and CW.
    Where did I mess up ?
    Thanks,
    -Chandru

    Hi,
    Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
    Just try and maintain it there against your account group and against your sales document type in VOV8.
    Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
    Let me know, reward points if helpful.
    Regards
    Ravi

  • Ship to party not defined for sales area x/y/z

    Hi Friends,
    While creating sales order I am getting following error---
    Ship to party not defined for sales area x/y/z .Please help to overcome this problem.
    xsales organisation  ; ydistribution channel ; z--division
    Regards

    Please go in Transaction XD01- Create Customer.
    then in Account Group, Select Sold to Party.
    Assign sales area , xsales organisation ; ydistribution channel ; z--division
    and check.
    Hope thiswill solve your problem

  • Ship to party not assigned to sales area

    Hi everybody
    When I am creating sales order for a customer in the sales area into which it's CMR is maintained  eg. 1000, 10 , 00. I get an error message ' ship to party...is not assigned to sales area 1000, 10, 01.'' Here SP is also SH.
    I checked the common Distribution Channel & common Division Master Data & the ref dc & ref dv are properly maintained. I don't know from where system is taking division 01.

    Hi,
    Please check VOV8(Sales documet type control).Here in the document type which you are using,check if Item condition field is marked.If it is marked then system is checking the division of the material you are using.
    Extend the customer to 1000/10/01 and then try creating the order.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Error message: Ship-to party 1111 not defined for sales area 1000 01 50

    Hi friends,
    I created a new division 50 reference the one available. I maintained all the combination in sales area as far as I know.
    When created SO, I got a error message saying "  Ship-to party 1111 not defined for sales area 1000 01 50". Message No VP210
    Please advise where I missed configuration.
    Thanks,
    Linda
    Edited by: LindaSAP on May 25, 2010 5:40 PM

    Hi,
    Please check the below links
    Ship-to party not defined for sales area
    "SHIP TO PARTY NOT DEFINED FOR SALES AREA "
    Ship to party is not defined for sales area..
    Ship-to party not defined for sales area
    Ship-to party 147 not defined for sales area US DS 20
    ship to party -sales area error
    Regards
    Senya

  • Ship-to party 10106086 not defined for sales area 6000 40 30 error

    HI gurus,
    We have maintained cross divisions 00, we VR02 have maintanied the combined the divisions and we have maitned the division at MM01, we are getting VP210 error: Ship-to party 10106086 not defined for sales area 6000 40 30.
    please help me in this we are unable to create a order.
    this is urgent.

    Hi,
    The error is Ship-to party 10106086 not defined for sales area 6000 40 30
    Here system is considering distribution chan 40 & division 30 
    Go to VOR1 and maintain like as
    Sales ogz - Distribution channel - Distribution for Condition  - Distribution chn for CUST/MATERIAL
    6000 - 40 - 40 - 00
    Then in VOR2
    Sales ogz - Division - division for Condition  - division for CUST
    6000 - 30 - 30 - 00
    Then also check you have created customer for sales area 6000-00-00
    Check in VOV8 go to details of your sales order type under general control tab Check division should be blank
    OR
    Remove division form material master basic data tab 1
    Kapil

  • SHIP TO PARTY NOT DEFINED FOR CERTAIN SALES AREA

    Hi ...
    I am creating a specific type of sales order in va01 by reffering a billing document . But soon after entering billing document no it is showing " SHIP TO PARTY NOT DEFINED FOR CERTAIN SALES AREA..." The sales area --- which it's showing in error it is quite different ....it's not that one what we used for it in that ref billing document .
    Note : We are maintaining ship to party  , sold to party ..... in CRM only
    Their also I checked it is assigned properly .Relatioship with sold to party is also OK .
    But in R/3 I have checked that ship party is created in VD01 Where as sold to party is created in XD01 .
    PLS ADVC

    Dear Sundar,
    Please check in these areas
    1.Check the sales area which you are trying to create sales order and copying invoice sales area is same or not.
    2.Why you haven't created ship to party in XD01 transaction.
    You go to XD01 transaction exetend the customer master then try.
    3.Check the customer master(Ship to party) is available under which sales area.
    I hope it will help you,
    Regards,
    Murali.

  • Ship-to party 147 not defined for sales area US DS 20

    Hi,
    I am getting following error while creating a sales orcer with ref to contract
    Ship-to party 147 not defined for sales area US DS 20
    Points will be rewarded for satisfactory answer.
    Thanks & Regards,
    Vinayak

    Hi,
    After maintaining in US DS 20 it is working fine.
    But normally we never maintain in US DS 20 for other transaction.
    then why it is asking for this transaction.
    we always create in US DS 10.
    is their mistake while creating a BP or any SPRO changes required.
    Thanks & Regards,
    Vinayak

  • Ship-to party 1600 not defined for sales area 1000 10 20

    Hi Friends,
    I am making  inquiry(VA11).I am using a material and sales org.combination as (1000/10/00).
    I have maintained the same sales org. for material also.i am using for example sold to party as 1600 and for this I checked in XD02 the combination of sales org is (1000/10/00).
    But after hitting enter I am getting the errror as Ship-to party 1600 not defined for sales area 1000 10 20 but for 1600 customer ship to party is defined in (1000/10/00).
    This error I am getting is quite unusual.(as I am using 1000/10/00 this combination exist for material and customer but why am I getting the error for 1000/10/20. ?).
    Any pointer will be rewarded.
    regards

    in mm02 i have already changed the division as 00 but still getting error(looking quite strange)
    same error I was getting earlier but got the solution after changing division in mm02 but not striking this time.
    also in xd02 for sales org 1000 and div. 20 i maintained both reference division for condition and reference division for customer as 00 bot no result yet.
    same error.
    Any other inputs.
    Regards
    Edited by: Amit Kumar on Oct 29, 2008 8:39 AM

  • Err.Sold-to party 1 not mainted for sales area EL01 01 01

    Hello SAP Gurus
    I am trying to save a quote from an external application using .NET connector which calls the bapi 'BAPI_QUOTATION_CREATEFROMDATA2'.
    I am getting back an error 
    E        VP     197       Sold-to party 1 not mainted for sales area EL01 01 01 .
    I am trying to search for this error on all SAP related areas and am not able to find anything that answers my question.
    Any feedback will be highly appreciated.
    Thanks
    Ram

    >
    Ram Prasad wrote:
    > Fortunately or unfortunately I am the only SAP guy in my company and I am actually certified in XI and but am wearing different caps at different time.
    ..Exactly You remind me my early career of SAP,I was the Only Person In My project,No matters it was kind of Support one,But i had been asked to handle some Tedious Asset Accounting isses-Some how i servived and turn the things around me,And Believe me The Stuff i learnt in such tiny 7 month is far More than i learnt my rest of my Life.
    Fortunately~

  • Hi Everybody, Ship to party not updating for Transaction number in "CRMD_ORDER" for some users?

    Process :
    1. We are updating ship to party for contracts(Transaction number ) , Here every thing is updating fine But i am facing the issue in CRMD_ORDER, Here what ever selected ship to party was not updating.
    2. i have find out the issue reason for failure  in  Debugging , its giving error as "  no_display_authority " in one standard function module  'CRM_ORDER_READ'.We are passing Header GUID to this FM .
    3. Even i went inside this FM 'CRM_ORDER_READ', Here it was checking for ACE(ACCESS Control ENGINE) authority check by using Standard FM
      "CRM_ORDER_CHECK_AUTHORITY_ACE"  this FM giving error as "Access denied by Access Control Engine".
    Can any help me on this how can i resolve this issue.
    Thanks in Advance.
    Regards,
    Venugopal

    Hi,
    Go to SPRO - SD - BASIC FUNCTIONS - PARTNER DETERMINATION Just check whther your partner function (SH) is assigned to your account group and also exists in the partner determination procedure.
    Just try and maintain it there against your account group and against your sales document type in VOV8.
    Also open your customer master for which you are trying to create this sales order. Just check whther in the partners tab , SH is shown? You can either use transaction BP or XD03.
    Let me know, reward points if helpful.
    Regards
    Ravi

  • Web Client - BP not valid for Sales Org - CRM 2007

    Hi,
        In the Web Client (CRM 2007, for the  Quick Create Activities it is not possible to add Business Partner's as Internal Assignees,Towards Awareness or Person's Responsible. There is an error message - "TEST1 is not Valid for Sales Org" -
    This issue never occured previously with the "Web Interaction Centers" - CRM 4.0, when we added in Internal Assignee's , Towards Awareness BP's.
    Any help on this would be greatly appreciated
    Thanks
    Dan

    Hi,
    I suppose this is not the right forum for this issue...
    Regards,
    Wolfhard

  • Customer not maintained in sales area

    when i create sales order system is throwing a error message
    like
    customer not maintained in sales area....
    in va01, after entering sold to party i am getting this error....
    what should be configuration setting for setting this right.... kindly advise

    Hello,
    As told by Venkat, you are required to maintain the Sales Area data.
    By seeing the error there is something that you are missing in Configuration.
    Go to XD02 and extend your customer. You only must have created two segments. Extend the customer to sales are segment.
    Thanks,
    Ravi

  • Value date is not maintained for payroll area 08

    Dear all,
    I am facing this error Value date is not maintained for payroll area 08 while executing Transaction
    PC00_M08_CALC.
    Please let me know how to rectify this error?
    Thanks
    Best regards,
    Smita

    Hi Shruti,
    Please find the attached screen shot of the error.
    Thanks
    Smita

  • Ship-to Party is not maintained in sales area

    Hi,
    While creating a sales order for a company code and if we give a different ship-to party, which is not belongs to that sales area, I'm getting a message "Ship-to Part XXX is not maintained in sales area abc xxxx yy zz".
    When I tried to add one more partner at header level, say "Mark for customer", and give the different customer number, the error is not coming.
    Can anyone tell whether this check will be done only for standard partners like Sold-to, Ship-to etc? and not for custom partners?
    Thanks,
    Kishore

    Try the following:
    BADI_SD_SALES        General Enhancements for Sales Order Proces
    BADI_SD_SALES_ADDON  Special enhancements which are not universa
    BADI_SD_SALES_BASIC  Enhancements for Sales Order Processing Par
    BADI_SD_SALES_ITEM   Enhancements for Sales Order Processing (It
    Andrew

Maybe you are looking for

  • Ipod touch 4G not recognized in itunes

    I just received my new ipod touch 4G 32GB in the mail today. It's running 4.1 (the latest firmware). I also have itunes 10. But itunes doesn't recognize my device but my laptop (Windows 7) does. Although, it is recognizing it as a digital camera, not

  • Problem installing Adobe Photoshop Elements "Shared Technologies" solved

    I was contacted by Adobe Support.  They remotely took over my computer.  Disabled the Antivirus and Firewall temporarily until restart after installation.  Then created a file labelled ADOBE.  I put in the disc and they downloaded the APE 10 to the f

  • Headers and Footers in Numbers

    How can I put Headers/Footers in a Numbers sheet. I was able to do this in the previous version, and then save as a pdf. Can'f see how to do it now. Thanks

  • Second Page?

    Hi Experts, I hv a smartform like the following, 1-Page Node - FIRST_PAGE 2-Text Node - MY_TEXT_1 3-Table Node - MY_TABLE_1 4-Command Node - GO_TO_SECOND_PAGE(no condition is defined) 5-Text Node - MY_TEXT_2 6-Table Node - MY_TABLE_2 7-Window Node -

  • Web Viewer Hyperlinks in Folio

    Hello, we building folios with Hyperlink Settings "Open in Folio", which works great on mobile devices. In Web Viewer nothing happens when clicking this Hyperlinks. In know by changing the setting to "Open in Device Browser" new tabs/windows open on