Error showing appfabric server is not configured correctly

Hello Guys,
I am getting error once I trying to install share point server 2013 on to windows server 2012.
The error message shows :- What
to do with error message "Windows Server Appfabric is not correctly configured. your should uninstall Windows Server Appfabric and reinstall it using the SharePoint Products preparation Tool
Here I attached the screen shot also.
Please help me to solve this issue, i am sure that appfabric server configuration is correct.

Hi,
Ya, I already uninstalled and again installed appfabric, but the configuration of appfabric showing successful completion. After trying to install the sharepoint server I am getting the above error.

Similar Messages

I am trying to install the trial version of Acrobat but the file AdobeDownloadAssistant.exe will not run -it gives an unnumbered error that the file is not configured correctly. "This application cannot be installed...Please contact the application author

I can't install the trial version of Adobe Acrobat because the AdobeDownloadAssistant.exe will not run. I get this error:
"This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
I completed the trial questionnaire & all seemed well. Can anyone help?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT4623 i have updated my i.phone 4 g but after updating when i turned on my phone it was showing the sign to connect to i.tunes and when when i connected i.tunes showed error that the server could not be contacted.... so what i can do now to resolve the

i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????

has your phone been jailbroken?

Lookup Query error: "Lookup properties not configured correctly"

Hi!
I have come up with some problems on configuring lookup query.
I get this error: "Lookup properties not configured correctly" on admin console-->user-->manage-->selecting the user-->Resource profile-->edit the process form
I created a table called "test_lookup" with the following columns: Oraganization, division and position (all varchars) in the database.
For Lookup Query:
This were the steps done on design console -->form designer-->properties tab:
On " Grupo(lookupfied) " I set the following properties:
Column widths = 100
Lookup Query = select Organization from test_lookup
Lookup Column Name = Grupo_teste
Column Caption = Organization
Column Names = Grupo_teste
On design console for Lookup definiton I set the following:
code: Lookup.KON.Grupo_teste
field: Grupo_teste
Lookup type: checked
Required: uncheked
Code key | Decode Key
Organization Organization
Any idea why this is hapenning? Any suggestion is more than welcome!
Thank you.
Kind Regards,
Kon

Refer this:
User list lookup
Column Names = usr_key,usr_first_name,usr_last_name
Lookup Column Name = usr_key
Lookup Query = Select usr_key, usr_first_name, usr_last_name from usr //(where act_key=123)
Column Captions = User Key,First Name,Last Name
Column Widths = 10,100,100
Have you tried this:
b)Select ACT_KEY from USR where USR_LOGIN = '$Requester Information.User Login$'
In lookup coloumn name=act_key
In coloumn width =100
In coloumn names=act_key
in coloumn caption =Organization Key

Measurement Computing USB-SSR24 error 42 Digital Port not configured correctly for requested operation

Using LV 2012 and ULx 2.02 LV driver:
LV is throwing an error 42 (Digital Port not configured correctly for requested operation) from the ULx write VI but only on PortCH. All my configurations are correct on the hardware and Instacal tests the ports OK. I've reinstalled everything and still see the same issue.
Since PortA is configured identical to PortCH, and PortA is functioning fine, I'm stumped. This is occuring on two different SSR24 DAQs so I don't think it's the hardware, plus I've already mentioned that the Instacal isn't having a problem with it.
I've attached my VI I'm using for debug.
Jeff
Attachments:
test of Wilmington.vi ‏19 KB

I worked with Measurement Computing and they agreed that there is a bug with certain DI/DO configurations. There are a possible 16 different DI/DO configurations with the hardware and apparently mine (PortA - DO, PortB- DI, PortCL-DI, and PortCH-DO will throw this error for PortCH. I'm currently using .net calls to work around the issue until the ULx driver is updated. I'll post that when I see it. Attached are the .net VI's that I'm using for simple static IO.
Attachments:
USB SSR DOT NET Write Bit.vi ‏20 KB
USB SSR DOT NET Read Bit.vi ‏21 KB

"Your server is not configured properly or your search query has ..."

Config info:
v490, 20k+users, JES 2005Q1,
118540-23
118207-42
115614-20
Brief Description:
When users select the Corporate Directory under the Address Book tab in CE and click the ALL button (or do a wildcard search) they get the following error:
"Your server is not configured properly or your search query has
exceeded the limit. Please check server configuration."
Additional info:
Additionally this error shows up when a user chooses a View: letter and clicks next for the following page, and additionally if they have the Corporate Directory set as their default address book in options.
Logs:
/sun1/dirserv/slapd-mail/logs/errors:
[11/Oct/2005:10:44:21 -0500] - WARNING<20805> - Backend Database - conn=161557 op=34 msgId=169 - search is not indexed
/sun1/dirserv/slapd-mail/logs/access:
[11/Oct/2005:10:23:21 -0500] conn=161557 op=17 msgId=124 - SRCH base="o=ualr.edu,dc=mail,dc=ualr,dc=edu" scope=2
filter="(&(&(cn=*)(|(objectClass=INETORGPERSON)(objectClass=GROUPOFUNIQUENAMES)))(objectClass=*))"
attrs="objectClass"
[11/Oct/2005:10:23:31 -0500] conn=161557 op=17 msgId=124 - RESULT err=0 tag=101 nentries=20540 etime=10 notes=U
/var/sun1/comexp/logs/uwc.log:
Oct 11, 2005 10:52:20 AM com.sun.uwc.abclient.ABInitFilter doFilter WARNING: Address Book session already set!!
changes in /var/sun1/comexp/WEB-INF/config/corp-dir/db_config.properties
lookthru_limit=30000
I have a ticket, just wondering if anyone else has this problem...

You'll be getting this in your case update (answer in response to the internal conversation we've been having about your issue)
So if they really want to control wildcard searches then they should look in the "personalstore.properties" file for the domain (default: /var/opt/SUNWuwc/WEB-INF/domain/personalstore.properties) for the value of "db.idir.wildcardsearch". Its possible settings are documented in the comments. If they wish to disable all "*" and "*x*" searches (i.e. turn off the 'All' and selecting a letter options) they should set the value to at least 2.

PerformancePoint Services is not configured correctly but I'm Site administrator

Hi experts
I recenlty create a business intelligence site and set my active directory user as administrator.
I'm server and database administrator too.
but when I want to create a data source I get this error:
The Data source cannot be used because PerformancePoint Services is not configured correctly
I see some solution in then interent but some of them say that should set unattended user for performance point service.
I'm site administrator and Why I should set unattended user?
thanks
semi developer

You should set the Unattended Execution Account if you don't want to set credentials for data sources.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Guest variable 'guest info.return_code' not configured correctly.

Hi,
I'm converting a SQL Server 2012 from Base DBVM to Base DB Template. After a while working on the conversion I get this error:
"Guest variable 'guest info.return_code' not configured correctly."
If I double-click the error I get the following message: "Cannot get detail information for the specified resource bundle."
I'd really appreciate if anyone can help with the issue.
Regards
Fernando

carlasummers wrote:
...Error: variable hourlyRate might not have been inialized and variable hoursWorked might not have been inialized. ....Haven't read your code, but whenever I see an error like this, I find that usually correcting what it tells me to correct helps: initialize the variables.
i.e.,:
    double hoursWorked = 0.0;
    double hourlyRate = 0.0;
    double weeklyPay = 0.0;also: never use float when you can use double (there are exceptions but they are few).
also: You need to get the employee name within the loop. Also it would help to add the prompt: "enter \"stop\" to quit" or something of that nature. Assume that the users of your program are idiots.
Also, when posting code here, please use code tags so that your code will retain its formatting and thus will be readable -- after all, your goal is to get as many people to read your post and understand your code as possible, right?
To do this, highlight your pasted code (please be sure that it is already formatted when you paste it into the forum; the code tags don't magically format unformatted code) and then press the code button, and your code will have tags.
Another way to do this is to manually place the tags into your code by placing the tag [code] above your pasted code and the tag [code] below your pasted code like so:
[code]
// your code goes here
// notice how the top and bottom tags are different
[/code]Best of luck.
Edited by: Encephalopathic on Apr 25, 2009 6:56 AM

Network Error: Clean Access Server could not establish a secure connection to Clean Access Manager

Hello everyone
I am implementing a failover solution of NAC in OOB VG version 4.8, I have 2 CAS and 2 CAM.
The Error I am getting is when I connect to both IP address and the FQDN of the CAS.
===========
Network Error:
Clean Access Server could not establish a secure connection to Clean Access Manager at camsrv3.cadivi.gob.ve.
This could be due to one or more of the following reasons: 1) Clean Access Manager certificate has expired 2) Clean Access Manager certificate cannot be trusted or 3) Clean Access Manager cannot be reached.
Please report this to your network administrator.
==========
For the CAM's I use this names camsrv1 and camsrv2. then generate a CSR in the camsrv1 with the name camsrv3.mycompany.com corresponding to virtual ip and it exported to camsrv2, Install the CA certificate of the company and everything works perfect.
This is the failover configuration
CAM:
Primary:     10.1.206.248 camsrv1.mycompany.com
Secondary: 10.1.206.249 camsrv2.mycompany.com
Virtual:       10.1.206.250 camsrv3.mycompany.com
Then I do exactly the same steps for the CAS's and this is the failover configuration:
Primary:     10.1.216.248 cassrv1.mycompany.com
Secondary: 10.1.216.249 cassrv2.mycompany.com
Virtual:       10.1.216.250 cassrv3.mycompany.com
Then I add the certificate of CAM in the CAS on the tab "Trusted Certificate Authorities" and vice versa.
The communication between all the CAM´s and CAS´s is correct (Primary, Secondary and Virtual). I can ping the IP and the FQDN and I can also manage the CAS through the CAM.
I verify that the time was right in the CAM and the CAS and all good up there.
Appreciate your help
Eduardo Navas

Eduardo,
Bump up the CAS/CAS communications logging on both the CAS and CAMs, and then look in the log files for clues.
On CAM they live in /perfigo/control/tomcat/logs and on CAS in /perfigo/access/tomcat/logs
HTH,
Faisal
If you find this post helpful, please rate so others can find the answer easily

The server isn't configured correctly

I have an Ipad1 with iOS 4.3.3.
I have a problem with the on-line videos (youtube - app and web - and other pages). My Ipad can't play videos greater than five or six minutes, and shows a pop-up window with the error "The server isn't configured correctly".
Has anyone had this problem?
Regards.

Nobody can help me?
Someone know how I can configure the server?
Thanks for your help.

Error "web service destination is not configured" in CTS+

Hi experts,
during deployment with CTS+ I get the error "web service destination is not configured" (see below). In fact there is a web service to be deployed and a WebDynpro-DC using this web service as adaptive web service model. The model uses the destination DACC_PI_WS_METADATA_DEST and DACC_PI_WS_EXECUTION_DEST. I configured both destinations in the server with type "WSDL".
Any idea what goes wrong?
Regards,
Christoph
1 ETP199 ######################################
1 ETP199X######################################
1 ETP189 DEPLOYMENT
1 ETP101 transport order     : "JADK900006"
1 ETP102 system              : "JAQ"
1 ETP199X######################################
1 ETP189 DEPLOYMENT
1 ETP101 transport order     : "JADK900006"
1 ETP102 system              : "JAQ"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "372.04.29" "700"
1 ETP198
2 EPU601X"CTS Deploy Service - Version 0.92" "06.03.2007" " " " "
2 EPU602 "==================================================""======================"" "" "
===="" "" "
2 EPU601 "Deploy web service destination =" " " " " " "
2 EPU601 "Directory =" "/usr/sap/trans/data" " " " "
2 EPU601 "SDM Deploy URL =" " " " " " "
2 EPU601 "SLD Deploy URL =" " " " " " "
2 EPU601 "XI Deploy URL =" " " " " " "
4 EPU607 Non-ABAP system "JAQ" (communication system "KSM")
4 EPU601X"Deploy for" "SDM" " " " "
4 EPU601 "Deploy File =" "karmann.comSC_DACCDIP_DACCD_C~20081001122205.sca" " " " "
4WEPU601 "Web service destination is not configured" " " ", deployment skipped" " "
4WEPU601 "Return Code =" "4" " " " "
4WEPU601 "Highest Return Code =" "4" " " " "

Hello,
I am getting an identical error per below. I have checked Web deploy service, CTSDEPLOY setup in SM59 etc and looks OK, yet the issue still occurs:
   Deployment
   Transport request   : BWDK903389
   System              : BWQ
   tp path             : tp
   Version and release: 372.04.36 700
   CTS Deploy Service - Version 0.92 06.03.2007
   ========================================================================
   Deploy web service destination =
   Directory =
   SDM Deploy URL =
   SLD Deploy URL =
   XI Deploy URL =
   Double-stack system BWQ
   Deploy for SDM
   Deploy File = CTSTEST_20081008_123719.epa
   Web service destination is not configured   , deployment skipped
   Return Code = 4
   Highest Return Code = 4
   Deployment
   End date and time : 20081015162015
   Ended with return code: ===> 4 <===
Anyone have any ideas on this one?
Thanks & Regards,
Michael

Help-UNICPOUTU always shows calendar server is not running

Hi All,
I am trying to export data from OCS 10g Calendar server and while using UNICPOUTU utility on default node (1), it always shows error message "Calendar Server is not running".
I have stopped and than started server many time using unistop/unistart and opmnctl with stopall/start all. I can work without any problem with OCS portal and Windows calendar client.
Can any body help me to find the cause and resolve it.
Thanks in advance for your help and time.

I was aware the format originated with CS&T (later Steltor) Corporate Time, and that the NetScape Calendar was of the same provenance. I didn't know SGI also had an offspring
of Corporate Time.
Sorry for not being more precise in my earlier post. I guess I should have said that the format used by unicpoutu/unicpoutr is specific to Oracle Calendar and other products derived from the earlier Unison/Corporate Time product.
Either way, though, iCal is format that more programs understand. uniical is also the program that Oracle support recommended I use, instead of unicpoutu, when I ran into bugs with unicpoutu in the past.
Tim

ITunes stopped working on Windows 8. Error message 7: iTunes was not installed correctly.

I have Windows 8. Originally iTunes worked fine, then it couldn't update (said it was unsuccessful). Then it stopped working, so I (after much research) tried a long and tiresome method of removing all Apple products and re-installing them. I did this 3 times and it eventually worked and has been working fine for a few months. Recently, when trying to update, it has said "update successful", but when checking for new updates, finds the same one it supposedly just installed, wanting to install it again. For a few weeks now it has not worked at all, saying "error message 7: iTunes was not installed correctly" when I attempt to open iTunes. I can't bring myself to go through the whole process again of uninstalling and reinstalling everything, it took hours and it clearly doesn't solve the problem. I have no idea what the problem is. Reinstalling only iTunes doesn't work. The support pages have no advice available for my crappy version of Windows.
Please help me!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
It shouldn't really take that long to do, assuming it goes smoothly.
tt2

Error message saying "iTunes has not been correctly localized for this language"

When trying to launch iTunes I'm getting an error message saying "iTunes has not been correctly localized for this language. Please run the English version"? Any suggestions are much appreciated and thank you in advance!

Let's try a repair install of iTunes.
Restart the PC first.
If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
Can you launch your iTunes now?

HT201210 iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly

iTunes update 11.1.4 produces an error message R6034 "An applicaton has made an attempt to load the C runtime library incorrectly" When that error is acknowledged, a second windows error 1114 "error 7" displays "iTunes was not installed correctly". I also tried to downloadiTunes 11.1.4 at th Apple website and that did not work either-It stalled with an erro message that stated the "mobile service" would not open HELP!

Hi Doug! I was having the same problem but after reading a lot of answers I found the solution. First of all you need unistall ALL THE SOFTWARE OF APPLE from your computer, I mean BONJOUR, QUICKTIME, ITUNES, APPLE SOFTWARE UPDATE, APPLE MOBILE DEVICE SUPPORT and the other one that is from compatibility with apps of apple, after that you must verify if this folders are removed if they don't then remove it:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple\
C:\Program Files\iTunes\
C:\Program Files\iPod\
If you have a 64-bit version of Windows, you'll need to confirm that the following folders have been removed:
C:\Program Files (x86)\Bonjour
C:\Program Files (x86)\Common Files\Apple\
C:\Program Files (x86)\iTunes\
C:\Program Files (x86)\iPod\
Then if you have ccleaner you can use it to clean all registers left, then reboot and try to install iTunes 11.1.4 again as administrator... That works for me, I hope that helps you too...

Error showing appfabric server is not configured correctly

Similar Messages

Maybe you are looking for