Error showing in CRM SMQ1
Hi
I have faced a problem in the CRM Order when it is saved and transfered to SAP R/3 it showing one error in SMQ1 as StatusSYFAIL messageScreen does not exist.
I just to know the <b>detailed procedure for debugging</b> so that i will check both in CRM as well in SAP R/3 .
I found that for this the generated document in CRM showing one message in the status bar as ''Document being distributed change not possible".
Thanks in Advance
Deb
Hi Deb,
CRM order display this error until the response comes from R/3 that the uploaded sales document is processed in R/3 successfully.
Go to the CRM transaction SMW01 and see what is the error displayed by the Bdoc. I think you should be able to understand the error. If not please let me know the error, so that we can debug further
Regards,
Paul Kondaveeti
Similar Messages
-
While releasing a PO an error showing PO cannot be released
While checking the PO release an error showing PO cannot be released is showing.The release button is not appearing from the first code itself
Hi,
The following are the various reasons for the errormessgae.
1. PO would have already released.
2. PO would not have come under the perview of release u defined
3.You would not have authorization for release M_EINK_FRG object.
4.The charetarestcs defined will not come for this PO properties.
ETc.
Mostly , if all the config is setand done and working fine for other POs tooo then this PO iswith the problem.
Do you have this problem for other POs too with the same kind of PO?
Regards, -
I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
Is there any workaround to this error? so that drillthrough can be done even with multiple selection.Hi Vikas,
The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted.
For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
1. Select a single Item.
2. Select all items.
Hope this helps!
Please mark as Answer if this helps! Thanks, Rajasekhar. -
i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help
Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there? -
Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support -
There is error showing while updating my iPad 2 software to IOS 6.1. Please suggest me what should I do?
You need to tell exactly what is happening. What does the error say?
-
While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??
What DVD drive are you using?
-
im can u please help me out this issue im trying to install iTunes in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.
Try the following user tip:
" ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows -
Error in creating Table Maintenance for TABLES: J_2IRG1BAL ,Dump error show
Dear Gurus
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No. Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
*Dump Error Shows in Production*
Runtime Errors SYNTAX_ERROR
Date and Time 11.12.2008 09:26:30
What happened?
| Error in ABAP application program.
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
rigger Location of Runtime Error |
Program SAPLSVIM
Include LSVIMU01
Row 107
Module type (FUNCTION)
| Module Name VIEW_MAINTENANCE
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
105
Initialisierung des Abgleichsmandanten zum View *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
| 110| USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.I have send you all the details regarding the table maintenance generator
error is shown below
I have Created one Table Maintenance for TABLES: J_2IRG1BAL ,
1) I have take function group as same as table name like J_2IRG1BAL
3) Authorization Group &NC&
4) Authorization object S_TABU_DIS
5) Function group J_2IRG1BAL
6) Package J1I5
7) Maintenance type one step.
8) Maint. Screen No. Overview screen 2009.
9) Recording routine STD recording routines .
I have assign screen single screen 1 but it will not take the screen so ill put screen 2009 ,the system will not not accept the screen but I proposed to Save and activate the table maintenance generator and created and save the function group ,the table is ready to save the entries
We have to go to SM30 then put 4-5 entries ,after that a dump error shows
Which i have attachéd in this mail kindly help me out
Its effect in production server.
I have found that the error is given below I have mentioned all the details
Kindly read this
I have created function group J_2IRG1BAL and assign Package J1I5 and function group,J1I5 is already a Function group so problem occurs a dump error message displays
Kindly give me the right solution all the Clients are effected
110,100 150,250 these all are effected development clients
300 is prod client this is also affected because I have created a table maintenance generator and send the req to production .
Runtime Errors SYNTAX_ERROR
Date and Time 11.12.2008 09:26:30
ShrtText
Syntax error in program "SAPLJ1I5 ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLSVIM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLJ1I5 ", the following syntax error occurred
in the Include "SAPLJ1I5 " in line 0:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Author and last person to change the Include are:
Author "TTLABAP2 "
Last changed by "TTLABAP2 "
Error analysis
In program "SAPLJ1I5 ", the following syntax error occurred:
"The program "SAPLJ1I5" is not Unicode-compatible, according to its pro"
"gram attributes."
Trigger Location of Runtime Error
Program SAPLSVIM
Include LSVIMU01
Row 107
Module type (FUNCTION)
Module Name VIEW_MAINTENANCE
Source Code Extract
Line
SourceCde
77
TRANSPORTING NO FIELDS.
78
IF sy-subrc NE 0.
79
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
80
IF sy-subrc NE 0.
81
RAISE no_editor_function.
82
ELSE.
83
length = strlen( function_name1 ).
84
ASSIGN function_name1(length) TO <function_name>.
85
SELECT SINGLE * FROM tfdir WHERE funcname EQ <function_name>.
86
IF sy-subrc NE 0.
87
RAISE no_database_function.
88
ENDIF.
89
ENDIF.
90
INSERT x_header-viewname INTO alr_checked_views INDEX sy-tabix.
91
ELSE.
92
length = strlen( function_name1 ).
93
ASSIGN function_name1(length) TO <function_name>.
94
ENDIF.
95
96
Initialisierung der RFC-Destination zum View *
97
98
FPOOL+4 = X_HEADER-AREA.
99
fpool = x_header-fpoolname.
100
vim_default_rfc_dest-viewname = x_header-viewname.
101
vim_default_rfc_dest-rfcdest = rfc_destination_for_upgrade.
102
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
103
USING 'VIM_DEFAULT_RFC_DEST' 'C' vim_default_rfc_dest rc.
104
105
Initialisierung des Abgleichsmandanten zum View *
106
>>>>>
vim_default_upgr_clnt-viewname = x_header-viewname.
108
vim_default_upgr_clnt-client = client_for_upgrade.
109
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
110
USING 'VIM_DEFAULT_UPGR_CLNT' 'C' vim_default_upgr_clnt rc.
111
112
set flag if complex selection conditions in sellist *
113
114
IF complex_selconds_used NE space.
115
READ TABLE dba_sellist INDEX 1.
116
IF sy-subrc EQ 0 AND dba_sellist-cond_kind EQ space.
117
dba_sellist-cond_kind = 'C'. MODIFY dba_sellist INDEX 1.
118
ENDIF.
119
ENDIF.
120
121
direkter Vergleich: Flagge setzen usw. *
122
123
IF view_action EQ vim_direct_upgrade.
124
view_action = aendern.
125
PERFORM vim_set_global_field_value IN PROGRAM (fpool)
126
USING 'VIM_SPECIAL_MODE' 'C' vim_direct_upgrade rc. -
Error shows " enter valuation type in field batch"
Hi,
i transfer material from one plant to another plant using t-code mb1b by 311 mov.type ,
Error shows " enter valuation type in field batch",
what value i have to give in batch field and how to resolve this..Hi
311 represents--storage location to storage location. and it is not from plant to plant. please check it.
regards
ram -
when i start itune than error shows this ipod cannot be use because the required software not install
Have you tried removing and then einstalling the Apple software:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Any report or Table to see the list of orders with errors in SAP CRM?
Hello All,
Can anyone help me in getting a table or report to find the list of orders with errors in SAP CRM?.
Let me know if you need any additional information.Thanks in advance.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 26, 2010 11:59 AMHello Chait,
I got the solution by this report CRM_ORDER_CHECK_STATUS.
Anyhow thanks very much for your inputs.
Cheers
Sreedhar
Edited by: sreedharhazari2 on May 30, 2010 8:48 AM -
The page cannot be displayed Error showing for workspace
Hi All
The page cannot be displayed Error showing for workspace.
http://localhost:19000/workspace/index.jsp
Other web applications working fine.... Shared Services, FDM webclient
1. I have restarted Hyperion Workspace - Agent Service and IIS Admin service Still my problem didn't get resolved.
2.Below web services extensions provided *"Allow"* permission in Internet information services(IIS)Manager
Active Server Pages
ASP.NET v1.1.4322
ASP.NET v2.0.50727
Internet Data Connector
Server Side Includes
WebDAV
Application Pool->DefaultApp Status showing Running
Web sites->*1.Default web site 2.Administration* Status showing Running
Regards
SmileeCorrect, I just mistyped it in my thread. I just tried "http://epm.southbay.local:19000/workspace/"
When I click Start Reporting and Analysis core serivces a command prompt window opens with the name "server" on the window, but the command prompt window itself is empty. -
Error showing when connecting to MySQL using servlet
This is my Program. (MySQL.java)
package coreservlets;
import java.sql.*;
public class MySQL {
public static void main (String[] args) {
String driver = "com.mysql.jdbc.Driver";
String url = "jdbc:mysql://localhost/leave_app";
String username = "";
String password = "";
showEmployeeTable(driver, url, username, password);
public static void showEmployeeTable(String driver,
String url,
String username,
String password)
try{
Class.forName(driver);
Connection connection = DriverManager.getConnection(url, username, password);
Statement statement = connection.createStatement();
String query = "Select userid from userlogin";
ResultSet resultSet = statement.executeQuery(query);
while(resultSet.next()){
System.out.print(resultSet.getString("userid"));
connection.close();
} catch(ClassNotFoundException cnfe) {
System.err.println("Error loading driver: " + cnfe);
} catch(SQLException sqle) {
System.err.println("Error with connection: " + sqle);
Error showing
java.lang.ClassCastException: coreservlets.MySQL cannot be cast to javax.servlet.Servlet
org.apache.catalina.servlets.InvokerServlet.serveRequest(InvokerServlet.java:370)
org.apache.catalina.servlets.InvokerServlet.doGet(InvokerServlet.java:134)
javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
Could someone help me to resolve this bug?Hi,
I think you have misunderstood me. What I'm trying to say is that your MySQL.java doesn't seems to be the root cause of the problem.
The way you invoke the MySQL.java. may be the cause of the problem.
As from your implementation, your MySQL.java seems to be a plain java application. However, it seems that you are trying to treat MySQL .java as a servlet.
My guess this that you wanted to do something like this:
class MySQL extends HttpServlet {
public void doPost(..... ) {
//the codes in the main method to be put in this method.
public void doGet( ....) {
doPost(....)
//some of your other methods put here.
}For more information on how to write a servlet, you may visit http://java.sun.com/developer/onlineTraining/Programming/BasicJava1/servlet.html -
Can I recover photos on iPhone 4S not backed up on iCloud or computer when connect to iTunes error shows up on screen? My son was trying to update now it must go to restore. HELP!
If there is no backup of the device to iCloud or iTunes and the device has gone into recovery mode when trying to update, then the data is gone. If the device was connected to iTunes to do the update originally, it is possible the default backup was done, unless your son disabled it. To check to see if there is a backup, go in iTunes, click on Edit, Preferences, Devices and see if there is a backup listed for the date/time before the update was started. If he was doing the update OTA on the phone, then there is no backup. No backup, no photos.
Maybe you are looking for
-
All of my plug ins are erased?
hey there....i have logic express 9....on a macbook....my interface is an m-audio fast track pro....i went to play a song i was working on and i couldn't hear anything...then i noticed all of the plug in indicators on each channel had a slash through
-
I have rented a video and when I go to play it on apple tv from my iphone it only plays the sound, how do I fix this?
-
Original macbook sceen fades out to balck then it sleeps.
So i got the original macbook from when they first shipped out the intel processors. It's a core due 1.8 ghz. The other day, all of a sudden, the macbook started to shut off it's backlight and the sceen fades then it falls asleep. Sometime you can se
-
Unable to find abstract layer object definition
Hi, I am using SoapUI 3.6.1. When I send a request "getAttribute" along with all the optional parameters, specifying the Username and password in the Request Properties window, I am getting following error. <ns1:VdxServiceException xmlns="http://www.
-
I am trying to update my Iphone 4 to iSO 4.3 but when I following the instruction under Setting - General there is no option for Software udpate. Do I need to do this another way?