Error shown while transferring material frm Unrestricted to Sales Stock

Dear All,
I have a certain FG lying with me in unrestricted stock, the quantity is say 02 pcs , now When I try to transfer this material from unrestricted to Sales stock through MB1B using movement type 412E , its giving me an error saying 'Valuated project stock not allowed with customer stock'.
Kindly suggest where am I going wrong .
Thanks
Dgn

Valuated project stock not allowed with customer stock.
Message no. KI346
Diagnosis
The entered WBS element ID-00005-01 manages a valuated project stock. At the same time, a sales order stock is managed on the sales order item. This combination is not allowed since different valuation methods within a project are not allowed.
System Response
Processing is not continued.
Procedure
Enter a WBS element that does not manage a project stock or only a nonvaluated project stock, or change the inventory management for your sales order item in the valuation cl

Similar Messages

Hello Guru's Error MSG while creating Material Type HERS

Hello Guru's,
While creating material type HERS the system is showing the following error *"The field orign acceptance is defined as a required field; it does't contain an entry'"* will any one give solution.
even i have filled orign field in info record also still it is giving same error message, will anyone give solution.
full points for the answer.

hers is for the mpn
note the techincal name of that field and then go to oms9 and there make that filed for the filed selection key of hers as optional
u can get the field selcton key of hers from the tcode oms2

Error appearing while transferring products from CRM to R/3.

Hi All,
I am facing a problem in CRM system while transferring products from CRM to R/3. System is throwing a message "Exception condition NO_STRUCT_DEFINITION raised" and product transfer is not happening.
Please suggest some solution.
Thanks & regards,
Rupam.

Hi Arup,
Thanks for your assistance once again.
I have checked the 'CRMRFCPAR' table entries in R/3 system. One entry with 'Send XML=M' is present in that table.
No error Bdoc exists in system, the existing Bdocs are showing as successfully processed in the transaction 'SMW01', The queue name corresponding to the Bdoc is 'CRM_PRODUCT_IP'.
I have also checked the transaction 'GENSTATUS' .There is no object with status red, instead of that two objects are existing with green status.
Can you please tell me how to verify, whether parent object ('DNL_CUST_PROD0') has been successfully loaded or not?????
Eagerly waiting for your valuable suggetions.
Thanks & regards,
Rupam.
Edited by: rupamsap on Mar 19, 2010 9:46 AM

An error occured while transferring files, now all of my photos/videos are corrupted

Ok, so this is a strange situation, so bear with me. I was transferring some files from my iphone to my harddrive yesterday. And then I got an error message saying that some of the files didnt transfer for whatever reason. I didn't think much of it, cause these were older files anyway. But then I looked, and all of my more recent files (everything from December 23-Now) got corrupt. This is strange, because the files that I was transferring were from before December 23, so they weren't overlapping at all.
Anyway, I don't even know where to begin, because I really don't know what this is. Here's a picture of what I'm dealing with.
As you can probably tell, something weird is happening, since I do not have 4 million photos. (But I do have 286 videos). When I try to play a video, it says "the requested URL was not found on this server".
When I connect this to image capture, it shows the files as such:
So some of the information is still there, which is strange. I've also tried backing up from the backup that I made right before this error occured, and it appears that the files are corrupt within the backup too. So I have corrupt files on my phone, as well as corrupt files on my computer. I went to my MobileSync folder and found the backup, and tried changing some of the files to .mov files, and this allowed some of them to turn into video files, but they appear to be corrupt.
So basically, what are my best options? Is there any way I can salvage these videos? Is there an app that can export these videos, and then repair them? I'm pretty much really lost here, and going to the genius bar was no help.

Ok, so this is a strange situation, so bear with me. I was transferring some files from my iphone to my harddrive yesterday. And then I got an error message saying that some of the files didnt transfer for whatever reason. I didn't think much of it, cause these were older files anyway. But then I looked, and all of my more recent files (everything from December 23-Now) got corrupt. This is strange, because the files that I was transferring were from before December 23, so they weren't overlapping at all.
Anyway, I don't even know where to begin, because I really don't know what this is. Here's a picture of what I'm dealing with.
As you can probably tell, something weird is happening, since I do not have 4 million photos. (But I do have 286 videos). When I try to play a video, it says "the requested URL was not found on this server".
When I connect this to image capture, it shows the files as such:
So some of the information is still there, which is strange. I've also tried backing up from the backup that I made right before this error occured, and it appears that the files are corrupt within the backup too. So I have corrupt files on my phone, as well as corrupt files on my computer. I went to my MobileSync folder and found the backup, and tried changing some of the files to .mov files, and this allowed some of them to turn into video files, but they appear to be corrupt.
So basically, what are my best options? Is there any way I can salvage these videos? Is there an app that can export these videos, and then repair them? I'm pretty much really lost here, and going to the genius bar was no help.

Error occured while creating MATERIALIZED VIEW

I created as below:
CREATE MATERIALIZED VIEW LOG ON FIN.F_CV_HDR
WITH ROWID, SEQUENCE, PRIMARY KEY;
CREATE MATERIALIZED VIEW LOG ON FIN.F_CV_DTL
WITH ROWID, SEQUENCE;
REATE MATERIALIZED VIEW F_GL_SMRY_MVW
PARALLEL
BUILD IMMEDIATE
REFRESH FAST ON COMMIT AS
SELECT * FROM
SELECT
F_CV_HDR.ROWID "HDR_ID",
CAST(NULL AS ROWID) "DTL_ID",
cah_dsm_trm_tr_code gsv_dsm_trm_tr_code,
cah_dsm_dcmnt_type gsv_dsm_dcmnt_type,
cah_cv_nmbr gsv_dcmnt_nmbr,
cah_lcm_lctn_code dsv_lcm_lctn_code,
cah_dsm_dcmnt_srs gsv_dsm_dcmnt_srs,
cah_cv_date gsv_dcmnt_date,
'G' gsv_sub_code_type,
DECODE(cah_dsm_dcmnt_type,'CPV',0,'CRV',cah_net_amnt) gsv_amnt_dbtd,
DECODE(cah_dsm_dcmnt_type,'CPV','C','CRV','D') gsv_dr_cr_indctr,
cah_net_amnt gsv_amnt,
DECODE(cah_dsm_dcmnt_type,'CPV',cah_net_amnt,'CRV',0) gsv_amnt_crdtd,
cah_asm_sbldgr_code gsv_sub_code,
CAH_RMRKS GSV_RMRKS,
CAST(NULL AS VARCHAR2(3)) GSV_CRS_RFRNCE_TYPE,
CAST(NULL AS VARCHAR2(3)) GSV_CRS_RFRNCE_TR_CODE,
CAST(NULL AS NUMBER(10)) GSV_CRS_RFRNCE_NMBR,
CAST(NULL AS VARCHAR2(6)) GSV_FCM_CRNCY_CODE,
CAST(NULL AS NUMBER(6,3)) GSV_EXCHNGE_RATE,
CAST(NULL AS NUMBER(13,2)) GSV_FRGN_CRNCY_AMNT,
CAST(NULL AS DATE) GSV_DATE_FROM,
CAST(NULL AS DATE) GSV_DATE_TO,
CAST(NULL AS NUMBER(7)) GSV_RJH_NMBR,
CAST(NULL AS VARCHAR2(3)) GSV_PJC_SRS,
CAST(NULL AS NUMBER(7)) GSV_PJC_NMBR,
CAST(NULL AS NUMBER(3)) GSV_PJC_EQPTMNT_SRL,
CAST(NULL AS VARCHAR2(5))GSV_PJC_EXPNSE_HEAD_CODE,
CAST(NULL AS VARCHAR2(3)) gsv_dpm_dprtmnt_code,
cah_asm_amm_main_code gsv_amm_main_code,
CAH_LCM_LCTN_CODE_BOOK GSV_LCM_LCTN_CODE_BOOK,
CAST(NULL AS NUMBER) gsv_dr_cr_advce_srl,
0 gsv_dcmnt_srl_nmbr,
cah_trnsctn_with_indctr gsv_trnsctn_with_indctr,
cah_trnsctnr_code gsv_trnsctnr_code,
0 gsv_net_tds_amnt,
to_number(TO_CHAR(cah_cv_date ,'YYYY')) gsv_year,
to_number(TO_CHAR(cah_cv_date ,'MM')) gsv_mnth,
cah_cv_tmpry_nmbr gsv_tmpry_nmbr,
CAH_SRCE_INDCTR GSV_SRCE_INDCTR,
CAST(NULL AS VARCHAR2(50)) GSV_BILL_NMBR,
CAST(NULL AS DATE) gsv_bill_date,
cah_pay_rcve_name gsv_pay_rcve_name
FROM f_cv_hdr
WHERE CAH_FNCL_CLSRE_INDCTR = 'N'
AND cah_avlble_indctr = 'Y'
UNION ALL
SELECT
F_CV_HDR.ROWID "HDR_ID",
f_cv_dtl.ROWID "DTL_ID",
cah_dsm_trm_tr_code gsv_dsm_trm_tr_code,
cah_dsm_dcmnt_type gsv_dsm_dcmnt_type,
cah_cv_nmbr gsv_dcmnt_nmbr,
cah_lcm_lctn_code dsv_lcm_lctn_code,
cah_dsm_dcmnt_srs gsv_dsm_dcmnt_srs,
cah_cv_date gsv_dcmnt_date,
cad_sub_code_type gsv_sub_code_type,
DECODE(cad_dr_cr_indctr, 'C',0,'D',cad_amnt) gsv_amnt_dbtd,
cad_dr_cr_indctr gsv_dr_cr_indctr,
cad_amnt gsv_amnt,
DECODE(cad_dr_cr_indctr, 'D',0,'C',cad_amnt) gsv_amnt_crdtd,
cad_sub_code gsv_sub_code,
cad_rmrks gsv_rmrks,
cad_crs_rfrnce_type gsv_crs_rfrnce_type,
cad_crs_rfrnce_tr_code gsv_crs_rfrnce_tr_code,
CAD_CRS_RFRNCE_NMBR GSV_CRS_RFRNCE_NMBR,
CAST(NULL AS VARCHAR2(6)) GSV_FCM_CRNCY_CODE,
CAST(NULL AS NUMBER(6,3)) GSV_EXCHNGE_RATE,
CAST(NULL AS NUMBER(13,2)) gsv_frgn_crncy_amnt,
cad_date_from gsv_date_from,
cad_date_to gsv_date_to,
cad_rjh_nmbr gsv_rjh_nmbr,
cad_pjc_srs gsv_pjc_srs,
cad_pjc_nmbr gsv_pjc_nmbr,
cad_pjc_eqpmnt_srl gsv_pjc_eqptmnt_srl,
cad_pjc_expnse_head_code gsv_pjc_expnse_head_code,
cad_dpm_dprtmnt_code gsv_dpm_dprtmnt_code,
cad_amm_main_code gsv_amm_main_code,
cah_lcm_lctn_code_book gsv_lcm_lctn_code_book,
cad_dr_cr_advce_srl gsv_dr_cr_advce_srl,
cad_cv_srl_nmbr gsv_dcmnt_srl_nmbr,
cah_trnsctn_with_indctr gsv_trnsctn_with_indctr,
cah_trnsctnr_code gsv_trnsctnr_code,
0 gsv_net_tds_amnt,
to_number(TO_CHAR(cah_cv_date ,'YYYY')) gsv_year,
to_number(TO_CHAR(cah_cv_date ,'MM')) gsv_mnth,
cah_cv_tmpry_nmbr gsv_tmpry_nmbr,
cah_srce_indctr gsv_srce_indctr,
CAST(NULL AS VARCHAR2(50)) GSV_BILL_NMBR,
CAST(NULL AS DATE) GSV_BILL_DATE,
cah_pay_rcve_name gsv_pay_rcve_name
FROM f_cv_hdr,
F_CV_DTL
WHERE CAH_FNCL_CLSRE_INDCTR = 'N'
AND cah_avlble_indctr = 'Y'
AND cah_lcm_lctn_code = cad_cah_lcm_lctn_code
AND CAH_DSM_DCMNT_TYPE = CAD_CAH_DSM_DCMNT_TYPE
AND cah_cv_tmpry_nmbr = cad_cah_cv_tmpry_nmbr);
Giving below error:
==================================================
ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view
12054. 00000 - "cannot set the ON COMMIT refresh attribute for the materialized view"
*Cause:    The materialized view did not satisfy conditions for refresh at
commit time.
*Action:   Specify only valid options.
==================================================

*Action: Specify only valid options.

MG144 Error Messages while creating Material Master

Hi,
When creating Material Master getting Error for structure field is required. Message Number MG144.
Pls suggest.
Regards,
VR

Go through this note 45998
Or check, which field is required field and try to maintain or just make the optional entry in customizing

Unreadable Error Message While Transferring Photos

Hi. Wonder if anyone can give me some ideas about what may have gone wrong while trying to transfer photos from the SD card in my Kodak DX6440 Digital Camera into iPhoto 6 in the Mac Mini.
I have visited the support pages for the Kodak camera, the Kingston SD card, as well as Apple's pages for iPhoto for some clues, but haven't found anything.
Here is the set-up. Have this wonderful 1.25 GHz PowerPC G4, with 1 GB of RAM, Mac Mini with the latest updates installed. Photo library still in the 40 GB internal with 15 GB still available.
The DX6440 Kodak camera has the latest firmware.
So far, until today, this Apple computer experience has been rather blissfully trouble free. (Even with this event, I have felt no where near the kind of frustration that my Windows machine regularly generates!)
Here's what happened: put camera on dock and pressed button to import pictures into iPhoto. IPhoto 6 comes up and recognizes camera no problem. Begins importing the photos and succeeds in importing the first 15 or so of the 187 before stalling. By "stalling," I actually mean IPhoto seems to be working on something for a little while and then presents an error message saying that the rest of the pictures are "unreadable." I tried starting over and importing the photos several times without success even trying to after quitting and restarting iPhoto, doing a shutdown and rebooting the Mac Mini, taking out and putting the card back in the camera while it was off and disconnected from the computer. None of these have helped. You should know several addition items: iPhoto stops on the same picture and does import it but with varying degrees of completeness ie. may be only the top 50% of the picture or the top 70% of the same picture each time I have tried to import all of the photos. I would have deleted this troublesome image and moved on if it wasn't just about the best one of the whole group! All images can be viewed on the screen of the camera, no problem. Yes, this is the first batch of photos I took using this brand new Kingston 512 MB SD card. Before this and while leading that blissful Apple computer life, I had been using a SanDisk 256 MB SD card in the camera. (Kodak support pages says that the camera can handle SD cards ranging from 8 to 512MB. Glad I didn't buy that 1 GB SD card I was looking at.)
Additional information: I connected the camera to my windows 98 machine and of course, while it tried to prepare to import the pictures it froze/crashed. Ha ha ha.. had to unplug, reboot, watch it chide me for not shutting down properly and scan disk. When I rebooted the win98 computer I had a brainstorm and used this computer as a guinea pig, not risking my beloved Mac Mini. Ha ha ha. Okay, sorry. I plugged the camera in directly into the usb, not using the dock and it loaded into "my computer." Opened and then clicked on each file and imported them one at a time into Kodak Easyshare program. The point of my evil window-rabbling is the images could be read as files and photos just fine and came up in viewer no problem. Even the image that had been imported only partially in iPhoto came up fine and complete. I even burned two photo CD's and imported the photos easily into iPhoto on the Mac Mini this way.
Here are my questions: Could the new SD card be corrupting only the importing process since the photo files themselves seem to be readable afterall? If I had forgone the dock and connected the camera directly to the Mac Mini, would it have mounted on the desktop and then could I have opened the pictures in preview and clicked and dragged either one or all of the images into iPhoto and have it work this way? Would it have worked clicking and dragging the images directly on to the iPhoto icon in Tiger's dock, without the use of preview? Would repairing permissions make a difference? This last probably not the thing as it killed the window98 computer as well, but hey. Is there anything else that I am overlooking?
Any ideas, even if just brainstorming, would be very much appreciated as I always like to know more about things, so I am better prepared next time. Thank you so much for perservering through this long post!- WP.

Hi, WP. Looks like the trouble you're having seems to be iPhoto losing access to your card. I'm just guessing here, but considering that you get through the same number of photos each time before iPhoto complains that the pictures are unreadable, it sounds like the camera has been turning itself off or sleeping.
If there's a way to connect the camera directly via USB or something, you could try and see if iPhoto sees the mounted card and is able to import from it. A good way to also check your pictures for "readability" is to look at them via Image Capture - it lets you browse the photos if you click Download Some. Then you can confirm that the other photos are readable.
I'm sure image capture and iPhoto use the same services of the OS to download pictures, so if one works the other should. Maybe you should try and time the download - see if iPhoto "loses" the card exactly at the same time?
Maybe the easyshare's own software can talk to the camera and keep it awake, while iPhoto assumes the camera knows to stay awake? My directly connected cameras never sleep while importing.

Error Message while adding material in BOM

Dear All,
A raw material (A) is in the BOM as on date. A new material (B) which is a new development is to be used henceforth. I have inventory of A which can be consumed for the next 4 to 5 months.The material B is added as an alternate to A in the BOM,with 100 percent probability to B and zero percent to A. This is done to facilitate 2 motives.
1.To have auto generated PR for material B from the system, when the MRP run is done during the month.
2.To issue the material A to production based on Production order, which is based on BOM.
Also I Block the material A for further procurement by setting a special status to the material in the material master.This is done to ensure that no further PR & P.O is generated for material A.
After a month's time I am creating a BOM, for a new variant, where this material A or B is to be used. As per my earlier logic, I try to put both the materials as alternative to each other,with the 2 motives as mentioned above.
I am stopped by the system for including material A in the BOM,by an error message since it is blocked for procurement.
A warning message is welcome but not this error message.
Can anyone tell me how this can be done.And whether the procedure adopted in this scenario is a optimised one? Any other way to handle such a business situation?
Regards,
Aditya

Hi Aditya,
I think you can use production version .
You can create a production version with alternate bom1 with mateiral B.
Another version with alternate bom2 wtih material A.
Second option you can use discontinuation process with follow up material
check this link for further help.
http://help.sap.com/saphelp_47x200/helpdata/en/ea/e9b3f84c7211d189520000e829fbbd/frameset.htm
If helpful reward points
Regards
Ranga

Error messages while transfering library books on Digital Edition

My second laptop will not allow books to be transfered using Adobe Digital Edition. What is wrong with my download and how can I repair it.

Currently there is no adobe application that can convert a file which can be used in iPad, however, it will be soon be available. I think the following link might help you in answering your question.
http://www.adobe.com/products/creativesuite/design/crossmedia_resources/ebooks_software.ht ml
This link talk about the application that can convert the file to epub format which can be used in various devices such as Sony eReader, nook, iPhone etc.
I hope this might be helpful to you.

Error occurs while transfering flat data to sap.

hi friends ,
i am not able to update the data to the transaction 'XK01' from the text file.
this is my code.
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code. And use code tags to format code
Edited by: Rob Burbank on Oct 6, 2009 11:21 AM

Did you create the entry for this in the J2EE visual admin -> Cluster -> Server -> Services -> JCo RFC Provider ?

Error Field selection in material master for Tax

While creating material master MM01 in Sales orgn tab when I am trying to save HST tax for Canada, it is disappearing. Although I have classified customer tax & material tax in IMG-Sales & distribution as 1 & 0 both.
In MM I can see HST either 0 or 1 when pressing F4
I tried Log General/Material Master/Field Selection/Maintain Filed selection for data screen
I tried 0001 group but when opened it gives various numbers for optional/required/supressed/display entry
Which number is used for TAX? I could not identified.
Can any one tell me what is transaction code for field selection group for material master for making Tax Required Field?
Thanks for help.

Hello,
Tax problem is resolved by me only.
In Tax classification IMG/Sales & Dist/Taxes/Define Tax determination Rule
HST number was 4 I made as number 1 followed by CTX1 as 2 CTX2 as 3.....so on
So it picked up HST now as this was number one. Now in MM Tax is mandatory as I put 1 & in pricing it picked up.

Error while transfering PO in extended Scenario -- error 06 053 in R/3

Hi,
while transfering a PO from SRM to R/3 in extended Scenario we get an error in RZ20(SRM):
"No selectable items exist for purchase requisition xxx" --> error number 06 053
Whats happening here?
The PR is released in R/3 and yet not transfered into another PO.
Material and Material Group are the same, there is no contract involved and no differences within PO to PR.
Any ideas how to solve this problem?
Thanks and best regards
Andreas

Hi muthu,
thanks, that seems not to be the problem.
By using the fbgendat report in backend I found out, that R/3 seems to interprete my SRM PO as a local PO?!
Might there be a problem in SRM when calling the function module BBP_PO_BAPI_STATE within method set_po_bapi_state_in_be (class CL_BBP_BS_ADAPTER_PO_CRT)?
Seems R/3 does not interprete my PO out of SRM as a SRM PO?
Does the RFC User needs additional roles for setting the BAPI_PO_STATE in R/3? (the RFC User does not have sap_all in R/3!)
Best regards
Andreas

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Background job finishes but error Error While Updating Material into Standard SAP5678

Dear
we run background job which finishes successfully but when we sqw logs it shows
Error While Updating Material into Standard SAP5678
Kindly share the reasons
Regards

This is an ERP Upgrade space and you should consider raising threads in the right space for prompt replies. Next time consider using SAP NetWeaver Administrator space for issues like these. Also you should consider closing your previous thread with the correct answer for future reference.
What I see is a custom job. You should check what the job does and also the trace file of the work process and the consult with the application team or the developer for more information. Unfortunately with that screenshot there is nothing much we can advice you.
Regards
RB

Error While Creating Materialized View

Hello,
I am getting error ORA-22818: subquery expressions not allowed here while creating materialized view. I am using Oracle9i Enterprise Edition Release 9.2.0.1.0. Below pasted is my SQL Script.
Any help is highly appreciable.
Thanks
*********SQL************
select distinct(id),NAME,(select count(GRADE) from employees where
nationality like '%US%'and id=a.organization_id and grade=a.grade
group by ID,GRADE) US,(select count(GRADE) from employees where
nationality not like '%US%' and organization_id=a.organization_id and grade=a.grade
group by ORGANIZATION_ID,GRADE) NON_US,grade from employees a
where grade is not null
group by GRADE,ID,name
order by to_number(grade) desc

Hi,
This is a documented restriction on MVs. You cannot have a scalar express (i.e a select statement) in the select list.
You can get round this by joining your select count(grade).. expression in as an inline view in your FROM clause. Or you can create a normal view without the scalar expression, create your MV as a select from this view, then re-define your view to contain the query you want.
Hope that helps,
Rod West

Error shown while transferring material frm Unrestricted to Sales Stock

Similar Messages

Maybe you are looking for