ERROR SHOWS 'VARIANT CASHDE DOES NOT EXIST' WHILE GIVING PRINT in tcod FBCJ

DEAR ALL,
MY FI CONSULTANT WHILE PRESSING PRINT BUTTON IN FBCJ TCODE FOR CASH JOURNAL AN ERROR MESSAGE SHOWS 'VARIANT CASHDE DOES NOT EXIST '. AS AN ABAPER I TRIED A LOT AND DEBUG THE STD. PROGRAM BUT I AM UNABLE TO SOLVE THE ISSUE. SO I NEED UR HELP .PLEASE SUGGEST ME TO SOLVE THE ISSUE.
IT IS VERY URGENT.
REGARDS
BANAJA

Thanks

Similar Messages

Error :-The requested resource does not exist while opening the adobe form

hello Experts,
We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
We have developed adobe form using HCM forms and processes and done the required configuration in SPRO
When we are trying to open the form from ESS we are getting below error
404 not found
The requested resource does not exist.
Please look into this issue and let us know any thing we are missing
Sincerely
Paresh

is ADS working correctly?
1. Use transaction SA38 to execute the program FP_TEST_00.
       Detailed information about this test program and about how you
       should then proceed is given in the Adobe Document Services
       Configuration Guide in the Help Portal under:
       http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
       94facfdc09a359b1/frameset.htm -> Adobe Document Services
       Configuration Guide -> Configuring the Web Service -> Securing
       Access to the Web Service ->Configuration Check -> Configuration
       Check for PDF-Based Forms in ABAP
       - If the FP_TEST_00 form is displayed in the print preview, the
          ADS configuration is correct.
          -> If you use scenarios with an interactive PDF, proceed with
          point 5. Otherwise, proceed with the test under point 6.
       - If the system displays an error message instead of a form, the
          configuration of ADS is incorrect.
          -> Carry out the additional tests from point 2 onwards.
2. Use transaction SA38 to execute the program FP_PDF_TEST_00.
    This enables you to check the RFC connection to ADS (see the
    reference to the documentation given above).
       - If the system displays the version number of ADS, the
          configuration of the RFC connection is correct.
read the note 944221
Please paste the whole error? Is any dump in ST22

Java communication error - RFC destination NOT_CONFIGURED does not exist

Hello,
We are facing problem when sending reports(BEx Quert) through broadcasting to the users. We are getting the error "Java communication error RFC destination NOT_CONFIGURED does not exist" in the Log Display (Tcode: RSRD_ADMIN).
In the broadcasting setting, if we select variable values in the tab "General Precalculation" then we can able to send the report to user, instead of selecting variable values, if we use the option "User Specific" check box in the tab Receipient(s) (which will take selection from the role authorizations defined in the respective user roles), then we are getting the above error.
Recently we have upgraded suppor package, please find the system details below
P_BASIS - SAPKB70025
PI_BASIS - SAPKIPYM12
SAP_BW - SAPKW70027
Java - Support Package 25
We didn't change any roles and authorizations recently, just upgraded to latest SP. Can anyone suggest if any steps or checks need to be perfomed after applying these SP or missing anything?
Thanks in advance
Regards,
Venkatesh

Hi,
This is configuration issue. Please check the configuration between BW and EP below link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&overridelayout=true
Thanks,
Venkat

Getting error 'Item 00000 does not exist' while creating a salse order

Hi All,
We are facing an issue, we get an error message saying 'Item 00000 does not exist' while creating a sales order for a particular order type, we do not get this problem with all the materials, only a few of them and the materials which give a problem are part of the supersession chain. The problem is not even coming for all the superseded materials.
This problem is occuring with none of the other order types but just one. We have compared the configuration for the order types for which this error is not coming and the order type which is giving the problem, and its exactly the same.
When creating the sales order through VA01 even though the error message comes, but on hitting the enter button the processing goes further. But when creating the sales order through the background program the processing stops the moment the error message comes and the Sales Order does not get created.
Your valuable suggestions for helping us resolving this issue will be highly appreciated.
Regards,
Geeta

HI Geeta
As per your post "Problem is when you are executing VA01 in background sales orders are not generating due to error message".
Apart from configuration check alternative is "Take ABAPer's help and change this error message type to warning/information message type in the system". With warning/information message type you could be able to create sales orders in background also.
try and revert

ALE error - variant LOGSYS does not exist?

In trying to setup ALE within SAP (ECC 5.0) to send a material master IDOC from the ERP to XI. I followed the ALE Quick Start guide and several other resources on the net including IDOC Cookbook and others. When I try to select transaction BD10 (Send Material Master), it returns the following error:
Variant LOGSYS does not exist
The long text is:
Variant LOGSYS does not exist
Message no. DB612
Diagnosis
You selected variant LOGSYS for program RBDSEMAT.
This variant does not exist.
Procedure
Correct the entry.
In trying to narrow down the problem, I created a minimal scenario of just sending the MATMAS IDOC from one client to another on the same system and I get the same error.
My first thought was the logical systems for the two
clients were not setup correctly, but they seem okay. I'm using the 'PRODUCTION' logical system that came with the IDES version we installed (client 811) and trying to send to a new client I setup as logical system VM1CLNT300 (client 300) on the same system.
RFC Destinations test okay, partner profiles, ports, and the distribution model seem okay.
Googling for that error message above produced nothing that I could get an answer from. Any ideas?
Thanks,
-tim

Yes, both logical systems are there. Additionally, each
client has been set to the appropriate logical system:
client 811 -> PRODUCTION logical system
client 300 -> VM1CLNT300 logical system
-tim

DP Mass Processing error Variant &0000000000322 does not exist

Hi,
When I double click on the process chain which is created already in transaction RSPC, the system displays message Variant &0000000000322 does not exist.
Please help to resolve this issue.
thanks and regards
Murugesan

Hi,
Variants starting with & are temporary variants and are not transported from one system to another. So if you have transported your process chain from one system to another, the chances are the temporary variants have not been transported.
So pls change your process chain to use a more permanent variant. You can create permanent variants for mass processing jobs as follows.
Go to SE38, type program name as /sapapo/ts_batch_run. Click on variants and create variants with the relevant info.
Hope this helps.
Thanks
Mani Suresh

Object instance 1200 does not exist (while executing task SWUS)

hello all,
i have created a workflow class and two methods (constructor, display) and 1 attribute PLANT (instance,public) in it.
i am using this class and display method in task t code PFTC.
While executing this task from SWUS , i am getting this error.Object instance 1000 does not exist.
As i was going through this blog. i have created everything exactly just like it is mentioned there.
But still i am getting this error. please guide me to detect where i am mistaken.
http://scn.sap.com/community/bpm/business-workflow/blog/2006/07/25/using-abap-oo-methods-in-workflow-tasks
this is class screen-shot and error i am facing while executing the task.
The methods which are implemented using the interface are emtpy(don't contain any source code lines).

sorry i forgot to mention that input value 1000 does exist in our system.
i have also tried F4 help. it is showing all existing plants in our system, but still it is not accepting values select from f4 help.
Also to add information,
I have executed class using F8 option in class builder, and it is working perfect.
source code of display method.(i am trying to view plant in display method just like in blog).
method DISPLAY.
break-point.
   data: ls_vt001w type v_t001w.
   CLEAR ls_vT001W.
   ls_VT001W-MANDT = SY-MANDT.
   ls_VT001W-WERKS = me->PLANT.
   CALL FUNCTION 'VIEW_MAINTENANCE_SINGLE_ENTRY'
     EXPORTING
       ACTION    = 'SHOW'
       VIEW_NAME = 'V_T001W'
     CHANGING
       ENTRY     = ls_vT001W.
endmethod.

Variant BP_CASH does not exist.

Hi frnds,
Variant BP_CASH does not exist
Message no. DB612
Diagnosis
You selected variant BP_CASH for program RFCASH20.
This variant does not exist.
Procedure
Correct the entry.
in Prd while doing fbcj tcode.
Tryng to take printout of the screen by selecting Print cash journal the above error is cmng and its going out of the screen..
Note : In development is working without any issues pl guide to solve this issue in Production.
Thanks in advance.

Thanks

Build Error : The name "LocalizedStrings" does not exist in the namespace

I have localised my app to 5 languages, it builds and runs perfectly in Silverlight, but when i open the project in Blend to make changes
it shows the following error
The name "LocalizedStrings" does not exist in the namespace "clr-namespace:appname".
Since it is bound, i need to build it, only then the text is visible :(
Any suggestions?
Alfah
Alfahisham

This is the declaration for the LocalizedStrings.cs
namespace LoveCycles_Free
public class LocalizedStrings
public LocalizedStrings()
private static LoveCycles_Free.AppResources localizedResources = new LoveCycles_Free.AppResources();
public LoveCycles_Free.AppResources LocalizedResources
get
return localizedResources;
And this is my App.xaml
<Application
x:Class="LoveCycles_Free.App"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:phone="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:shell="clr-namespace:Microsoft.Phone.Shell;assembly=Microsoft.Phone"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" >

<Application.Resources>
<local:LocalizedStrings xmlns:local="clr-namespace:LoveCycles_Free" x:Key="LocalizedStrings" />
<FontFamily x:Key="CicleSemi">C:/Users/PT3560003/AppData/Local/Microsoft/Expression/Blend/Font Cache/pj1jeoqe.v1v/Cicle Semi.ttf#Cicle Semi</FontFamily>
<FontFamily x:Key="PeaSnow">CustomFonts/peasnow.ttf#Pea Snow</FontFamily>
<FontFamily x:Key="CicleFina">CustomFonts/CicleFina.ttf#Cicle</FontFamily>
<Style x:Key="AnimatedButtons" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_settings.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<Style x:Key="AddButton" TargetType="Button">
<Setter Property="Background" Value="Transparent"/>
<Setter Property="BorderBrush" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="Foreground" Value="{StaticResource PhoneForegroundBrush}"/>
<Setter Property="BorderThickness" Value="{StaticResource PhoneBorderThickness}"/>
<Setter Property="FontFamily" Value="{StaticResource PhoneFontFamilySemiBold}"/>
<Setter Property="FontSize" Value="{StaticResource PhoneFontSizeMediumLarge}"/>
<Setter Property="Padding" Value="10,3,10,5"/>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="Button">
<Border Background="Transparent">
<VisualStateManager.VisualStateGroups>
<VisualStateGroup x:Name="CommonStates">
<VisualStateGroup.Transitions>
<VisualTransition GeneratedDuration="0:0:0.2"/>
</VisualStateGroup.Transitions>
<VisualState x:Name="Normal"/>
<VisualState x:Name="MouseOver"/>
<VisualState x:Name="Pressed">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneForegroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.812" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleX)" Storyboard.TargetName="ButtonBackground" />
<DoubleAnimation Duration="0" To="0.694" Storyboard.TargetProperty="(UIElement.RenderTransform).(CompositeTransform.ScaleY)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
<VisualState x:Name="Disabled">
<Storyboard>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="Foreground" Storyboard.TargetName="ContentContainer">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneBackgroundBrush}"/>
</ObjectAnimationUsingKeyFrames>
<ObjectAnimationUsingKeyFrames Storyboard.TargetProperty="BorderBrush" Storyboard.TargetName="ButtonBackground">
<DiscreteObjectKeyFrame KeyTime="0" Value="{StaticResource PhoneDisabledBrush}"/>
</ObjectAnimationUsingKeyFrames>
<DoubleAnimation Duration="0" To="0.245" Storyboard.TargetProperty="(UIElement.Opacity)" Storyboard.TargetName="ButtonBackground" />
</Storyboard>
</VisualState>
</VisualStateGroup>
</VisualStateManager.VisualStateGroups>
<Border x:Name="ButtonBackground" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" CornerRadius="0" RenderTransformOrigin="0.5,0.5">
<Border.RenderTransform>
<CompositeTransform/>
</Border.RenderTransform>
<Border.Background>
<ImageBrush Stretch="Fill" ImageSource="Images/02/but_bg_password.png"/>
</Border.Background>
<ContentControl x:Name="ContentContainer" ContentTemplate="{TemplateBinding ContentTemplate}" Content="{TemplateBinding Content}" Foreground="{TemplateBinding Foreground}" HorizontalContentAlignment="{TemplateBinding HorizontalContentAlignment}" Padding="{TemplateBinding Padding}" VerticalContentAlignment="{TemplateBinding VerticalContentAlignment}" FontSize="20"/>
</Border>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</Application.Resources>
<Application.ApplicationLifetimeObjects>

<shell:PhoneApplicationService
Launching="Application_Launching" Closing="Application_Closing"
Activated="Application_Activated" Deactivated="Application_Deactivated"/>
</Application.ApplicationLifetimeObjects>
</Application>
Alfahisham

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Error - Business partner 30000011 does not exist in role TR0151

Hello,
I am receiving an error "Business partner 30000011 does not exist in role TR0151" while creating a Fixed Deposit Transaction through FTR_CREATE.
Whilst testing Fixed Deposit accounting in SAP Treasury, i was testing a scenario of a MINOR and his/her GUARDIAN. Both have been created as Business Partners. However, i have NOT created the Minor further as a Customer.
I now have a MINOR defined as a Business Partner, a GUARDIAN defined as a BUSINESS PARTNER and CUSTOMER both and a relationship established between the two through the RELATIONSHIPS tab.
After doing the above, i am trying to create a Fixed Deposit through FTR_CREATE where i am receiving the above mentioned error.
In Customizing, i have checked that the TR0151 is assigned to COUNTERPARTY role and TR0154 to the BENEFICIARY role
The GUARDIAN was created with BP role - Business Partner General and then changed to COUNTER PARTY. The MINOR has been created with BP Role - Business Partner General and then changed to BENEFICIARY.
My expectation was that since MINOR is not defined as Customer, the system would not allow me to create a FD for the Minor and display such a message which would ask me to create the FD using the GUARDIAN as the Business Partner.
Request your help on this.
Regards,
Murtuza.
+91 9923205169

Hi,
It is not necessary that a business partner has to be linked to a customer account. In certain cases, your house bank itself acts as a counterparty, in that case you can directly settle to your bank account instead of managing through a customer.
For your case, you need to maintain the role of counterparty for MINOR as well. Only if the business partner exists in that role can you create a transaction.
Regards,
Ravi

Error ORA-02289: sequence does not exist

While I was practicing chapter 6 a book on "hands-on oracle database 10 g express edition for windows" by Mr. Bobrowski forwarded by tom kyte, I like to be one those as well, lol, the living legend of oracle technology <page 225-226> , I got the following error while trying to insert the data manually
error ORA-02289: sequence does not exist
I also checked the sequence, it does exist ,
host-ids, db-ids, ap-ids all do exists
I am wondering my OS windows xp and however, I have entered AIX in host OS field and 5.2.0.0 in the hostos_version field and cpu=4
I kind do not understand this too since my pc running windows xp
any help would be appreciated since i couldn't go forward in my practice.
I e-mailed the author of the book (oracle Press) but no-reply so far, well I can understand that there is no money.

Basically, I copied everything from the cd-rom provided in the book of this author steve, oracle press. I logged on using my account <system> and password. The user is here only one which is <system>.
Everything was working well, until then as per the direction in the chapters upto 1- to mid 6, this is the first time I am stuck in following this book's simple excercises. It also asks me to look at the object if the sequence host_ids does exists in the drop down combo, as a matter of fact it does exist.
I am still wondering my question "my OS windows xp and however, I have entered AIX in host _OS field and 5.2.0.0 in the host_os_version field and cpu=4
I kind do not understand this too since my pc running windows xp "

Error: The requested resource does not exist. (Servlet)

Hello,
I created a simple JSP(submit form), that calls a servlet. When I run the JSP, I see the form. On submit, I get error screen:
404 Not Found
Error: The requested resource does not exist.
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: Go to main page of this application!
The URL shows the path to the servlet (fully qualified name of the servlet class)
http://<host>:50000/WebClient/<path>.ClientServlet
Logs don't show anything...
What am I missing here..,

The servlet mapping was wrong in web.xml(missed the package.name)

Variant YAE14 does not exist- F.27- Customer statement

Hi All,
User is getting an error message as Variant YAE14 does not exist. Message no. DB612. Variant YAE14 is correctly assinged to the company code and variant and print program is correctly defined in OB77 and OB78 respectively.
Kindly advice.
Diagnosis
You selected variant YAE14 for program RFKORD11.
This variant does not exist.

Have you created the variant for your program (Not asking about the assigning it in OB78)
Create it through SE38
or
IMG ==> Accounts Receivable and Accounts Payable ==> Vendor Accounts ==> Line Items ==> Correspondence ==> Make and Check Settings for Correspondence ==> Create Report Variants for Correspondence
Create with the same name (The variant name must be matched with the error variant user is getting)

T-code kbk6 (actual posting price) error " Layout 1-N01 does not exist. "

i tried to see t-code kbk6 (actual posting - actual price)
it's have error Layout 1-N01 does not exist. full error message i show you below.
how should i do. i tried to create 1-N01 in KP65 (create planning layouts for cost element planning)
i got error message You chose a name in a reserved name range -> Choose another name
what should i do ?
please help.
Layout 1-N01 does not exist.
Message no. K9151
Diagnosis
Planning layout 1-N01 entered by you or set by the planner profile does not exist in the current client.
This can have the following causes:
The planning layout has not yet been created in Customizing.
The planning layout is a layout delivered by SAP that has not yet been imported into the client to which you have logged on.
SAP planning layouts begin with a number, user-defined planning layouts do not.
Procedure
If you require the user-defined planning layout 1-N01, you must first create it in Customzing.
If planning layout 1-N01 is a layout delivered by SAP, you must first import this from client 000 in Customizing.
a) For layouts from General Controlling, choose Controlling -> General Controlling -> Production Start-Up Preparation -> Transport System Settings -> Transport Settings for Planning -> Import Standard Planning Layouts.
b) For layouts from Profit Center Accounting, choose Enterprise Controlling -> Profit Center Accounting -> Tools -> Transport Customizing Settings -> Transport Settings for Planning -> Import Planning Layouts.

Hi
The solution is outlined in the long text of the error, you need to import 1-N01 from client 000.
To import the Standard Planning Layout 1-N01 from Client 000 use transaction code OKBF. The menu path is SPRO - Controlling - General Controlling - Production Start Up Preparation - Transport Settings for Planning - Import Standard Planning Layouts.
Find the layout and execute the import. This should resolve the error.
Elaine

ERROR SHOWS 'VARIANT CASHDE DOES NOT EXIST' WHILE GIVING PRINT in tcod FBCJ

Similar Messages

Maybe you are looking for