Error SOFFICEINTEGRATION207 while opening Adobe Layout editor.
Hi ,
Till yesterday my Adobe Livecycle Designer was working perfectly fine. But today when I try to open the Layout Tab in SFP it throws the error "SOFFICEINTEGRATION207" along with "Error during Method Call' . It also shows the message -
Application Error : FORMDE~1.EXE - Memory could not be read.
I am not sure what went wrong today. I restarted my PC several times, but dint help. Kindly help.
Mahesh.
Helpful answers will be definitely rewarded.*****
Hi Otto,
The problem was that when I was trying to open the Layout editor in SFP, it was throwing some error messages
"Error SOFFICEINTEGRATION207" , " Memory referencing error etc. SAP has given solution of this problem in Note 1074025 as below :
Symptom
When opening Adobe LiveCycle Designer from SAP GUI or IDE, an error message
'The instruction at "0x6555dc12" referenced memory at "0x00000524". The
memory could not be "read"' is displayed.
Solution
1. Close SAP GUI or IDE which opens Adobe LiveCycle Designer
2. Check if process 'FormDesigner.exe' is running from TaskManager. If
process exists, kill it.
3. Delete folder 'Designer' from location:
c:\Documents and Settings\<your user ID>\Application Data\Adobe
This 'Designer' folder will be regenerated when Adobe LiveCycle
Designer is started again.
The solution worked for me!
Mahesh.
Similar Messages
-
Error occurred while opening Adobe reader 9.4
Hi all,
Using the following silent install switch i am installing "Adobe Reader 9.4".
silent install switch : /sALL /rs /l /msi "/qb-! /norestart ALLUSERS=1 EULA_ACCEPT=YES SUPPRESS_APP_LAUNCH=YES".
but when i try to open adobe reader, i am geting following error message,
Please help in this regard. Thanks in advance.
Regards,
VeeraHi ,
The same problem exits in my network also [ nearly 50- 60 machines has the same problem] ..
Expecting the solution as early as possible ..
Thanks ,
Murugesan -
Error while opening Adobe Form Builder
Hi all,
I am trying to open an existing form in Adobe Form builder (TA SFP).
When ever I display a standard form say FP_TEST_01 and go to the layout tab, I get an error saying <i><b>Error occurred in communication with layout editor</b></i>. I am using ECC 5.0 system.
Am I missing any configurations?
We have all the required configurations set as mentioned in Configuration guide. (Required for ABAP stack).
Please help me out.
Thanks in advance.
Regards,
Ravikiran.Or go to http://service.sap.com/download > Download > SPs and Patches > Search for SPs and Patches > Enter 'Designer'. Install Designer 7.0 <b>and the 7.0 patch</b> (!).
Kind regards,
Markus Meisl
SAP NetWeaver Product Management -
"Access Denied" pop up error while opening adobe online form in IE8.
"Access Denied" pop up error while opening adobe online form in IE8. I use crosslink to connect to client network and then open IE with App Tunnel. Tried to re-install Acrobat reader multiple times but issue still persist. Even tried to change the PDF properties (Edit-> Preference- General/Internet/Security Enhanced)
Hello Adobe technical Team,
I am struggling to fix the issue. Tried a lot of combinations to manipulate PDF preference, browser setting but failed to fix the issue. Can someone please look into the details and advise? Thanks in advance for any help.input. -
Can't Install. An error occurred while installing Adobe AIR
I can't install Adobe AIR. I'm getting the infamous error:
"An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator."
I'm the administrator of the computer.
I'm running Windows 7 Ultimate 32-bit.
I've tried the right-click-run-as-administrator solution and I'm getting the same error.
I've read Troubleshoot AIR installation | Windows and none of the solutions worked.
I'm installing the latest AIR version (I've tried older versions too)
I've tried Microsoft Install and Uninstall Fix It and AIR doesn't appear on the list of programs.
Here is my install log:
[2012-04-13:11:31:20] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2012-04-13:11:31:20] Commandline is:
[2012-04-13:11:31:20] No installed runtime detected
[2012-04-13:11:31:42] Relaunching with elevation
[2012-04-13:11:31:42] Launching subprocess with commandline c:\users\mmazza\appdata\local\temp\aira62d.tmp\adobe air installer.exe -ei
[2012-04-13:11:31:42] Runtime Installer begin with version 3.2.0.2070 on Windows 7 x86
[2012-04-13:11:31:42] Commandline is: -stdio \\.\pipe\AIR_5604_0 -ei
[2012-04-13:11:31:42] No installed runtime detected
[2012-04-13:11:31:43] Starting silent runtime install. Installing runtime version 3.2.0.2070
[2012-04-13:11:31:43] Installing msi at c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi with guid {47FA2C44-D148-4DBC-AF60-B91934AA4842}
[2012-04-13:11:31:45] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Rolling back install of c:\users\mmazza\appdata\local\temp\aira62d.tmp\setup.msi
[2012-04-13:11:31:45] Rollback complete
[2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1603" errorID=0]
[2012-04-13:11:31:45] Runtime Installer end with exit code 7
[2012-04-13:11:31:47] Runtime Installer end with exit code 7
Hope someone can help. Thanks.Chris, thanks for your help. Here's the log:
=== Logging started: 4/16/2012 11:16:05 ===
Action start 11:16:05: INSTALL.
Action start 11:16:05: FindRelatedProducts.
Action ended 11:16:05: FindRelatedProducts. Return value 1.
Action start 11:16:05: ValidateProductID.
Action ended 11:16:05: ValidateProductID. Return value 1.
Action start 11:16:05: SetSHAREDADDINFOLDER.
Action ended 11:16:05: SetSHAREDADDINFOLDER. Return value 1.
Action start 11:16:05: CostInitialize.
Action ended 11:16:05: CostInitialize. Return value 1.
Action start 11:16:05: FileCost.
Action ended 11:16:05: FileCost. Return value 1.
Action start 11:16:05: CostFinalize.
Action ended 11:16:06: CostFinalize. Return value 1.
Action start 11:16:06: MigrateFeatureStates.
Action ended 11:16:06: MigrateFeatureStates. Return value 0.
Action start 11:16:06: InstallValidate.
Action ended 11:16:06: InstallValidate. Return value 1.
Action start 11:16:06: SetARPINSTALLLOCATION.
Action ended 11:16:06: SetARPINSTALLLOCATION. Return value 1.
Action start 11:16:06: InstallInitialize.
Action ended 11:16:07: InstallInitialize. Return value 1.
Action start 11:16:07: ProcessComponents.
Action ended 11:16:07: ProcessComponents. Return value 1.
Action start 11:16:07: UnpublishFeatures.
Action ended 11:16:07: UnpublishFeatures. Return value 1.
Action start 11:16:07: RemoveRegistryValues.
Action ended 11:16:07: RemoveRegistryValues. Return value 1.
Action start 11:16:07: RemoveDuplicateFiles.
Action ended 11:16:07: RemoveDuplicateFiles. Return value 1.
Action start 11:16:07: RemoveFiles.
Action ended 11:16:07: RemoveFiles. Return value 0.
Action start 11:16:07: InstallFiles.
Action ended 11:16:07: InstallFiles. Return value 1.
Action start 11:16:07: DuplicateFiles.
Action ended 11:16:07: DuplicateFiles. Return value 1.
Action start 11:16:07: WriteRegistryValues.
Action ended 11:16:07: WriteRegistryValues. Return value 1.
Action start 11:16:07: RegisterUser.
Action ended 11:16:07: RegisterUser. Return value 1.
Action start 11:16:07: RegisterProduct.
Action ended 11:16:07: RegisterProduct. Return value 1.
Action start 11:16:07: PublishFeatures.
Action ended 11:16:07: PublishFeatures. Return value 1.
Action start 11:16:07: PublishProduct.
Action ended 11:16:07: PublishProduct. Return value 1.
Action start 11:16:07: InstallExecute.
MSI (s) (EC:04) [11:16:09:069]: Product: Adobe AIR -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
Action ended 11:16:09: InstallExecute. Return value 3.
Action ended 11:16:10: INSTALL. Return value 3.
Property(S): ARPINSTALLLOCATION = c:\Program Files\Common Files\Adobe AIR\
Property(S): SHAREDADDINFOLDER = c:\Program Files\Adobe\Flash Player\AddIns\airappinstaller\
Property(S): UpgradeCode = {8DA920D5-C41C-42E0-BF31-87BA49984EE4}
Property(S): UC8DA920D5C41C42E0BF3187BA49984EE4 = {FDB3B167-F4FA-461D-976F-286304A57B2A}
Property(S): Resources = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\
Property(S): Version = c:\Program Files\Common Files\Adobe AIR\Versions\1.0\
Property(S): Versions = c:\Program Files\Common Files\Adobe AIR\Versions\
Property(S): AIR = c:\Program Files\Common Files\Adobe AIR\
Property(S): CommonFilesFolder = c:\Program Files\Common Files\
Property(S): TARGETDIR = c:\
Property(S): SourceDir = c:\users\mmazza\appdata\local\temp\air5438.tmp\
Property(S): Manufacturer = Adobe Systems Incorporated
Property(S): ProductCode = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Property(S): ProductLanguage = 1033
Property(S): ProductName = Adobe AIR
Property(S): ProductVersion = 3.2.0.2070
Property(S): REINSTALLMODE = amus
Property(S): ARPSYSTEMCOMPONENT = yes
Property(S): REBOOT = Suppress
Property(S): ALLUSERS = 1
Property(S): SecureCustomProperties = ARPSYSTEMCOMPONENT;REINSTALLMODE;SHAREDADDINFOLDER;UC8DA920D5C41C42E0BF3187BA49984EE4
Property(S): MsiLogFileLocation = C:\Users\mmazza\AppData\Local\Temp\MSI46b03.LOG
Property(S): PackageCode = {496CC99A-E905-4C30-B3F0-14CB137CACAC}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): CURRENTDIRECTORY = C:\Users\mmazza\Downloads
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 1156
Property(S): VersionDatabase = 200
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 601
Property(S): WindowsBuild = 7600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 1
Property(S): WindowsFolder = c:\Windows\
Property(S): WindowsVolume = c:\
Property(S): SystemFolder = C:\Windows\system32\
Property(S): System16Folder = C:\Windows\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\mmazza\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): AppDataFolder = C:\Users\mmazza\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\mmazza\Favorites\
Property(S): NetHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\mmazza\Documents\
Property(S): PrintHoodFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\mmazza\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\mmazza\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\mmazza\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 6
Property(S): PhysicalMemory = 3325
Property(S): VirtualMemory = 4304
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = mmazza
Property(S): UserSID = S-1-5-21-823518204-1563985344-842925246-12804
Property(S): UserLanguageID = 1033
Property(S): ComputerName = RGPROWS1015
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 22
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 11:16:10
Property(S): Date = 4/16/2012
Property(S): MsiNetAssemblySupport = 4.0.30319.1
Property(S): MsiWin32AssemblySupport = 6.1.7600.16385
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): USERNAME = d
Property(S): DATABASE = c:\Windows\Installer\446fe3.msi
Property(S): OriginalDatabase = c:\users\mmazza\appdata\local\temp\air5438.tmp\setup.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): ROOTDRIVE = c:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): INSTALLLEVEL = 1
Property(S): SOURCEDIR = c:\users\mmazza\appdata\local\temp\air5438.tmp\
Property(S): SourcedirProduct = {47FA2C44-D148-4DBC-AF60-B91934AA4842}
Property(S): ProductToBeRegistered = 1
MSI (s) (EC:04) [11:16:10:707]: Product: Adobe AIR -- Installation failed.
MSI (s) (EC:04) [11:16:10:720]: Windows Installer installed the product. Product Name: Adobe AIR. Product Version: 3.2.0.2070. Product Language: 1033. Manufacturer: Adobe Systems Incorporated. Installation success or error status: 1603.
=== Logging stopped: 4/16/2012 11:16:10 ===
I've tried to delete the HKEY_LOCAL_MACHINE\SOFTWARE\Classes\.air\OpenWithProgids key, but I got the message "Cannot delete. Error while deleting key" -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
The source of Grid is Essbase. The tunning parameters in Essbase.cfg file are in place.
Could anyone please through more observation on this issue. Let me know if any further information is needed!.
Kindly suggest me any way to resolve it.
Thanks,
KrishanThe isapi (if you use one) timeout setting might be smaller than the time essbase needs to retrieve te information.
but most probably the analysis applicationserver jre heapsize is either to small or needs to much time to allocate it. Be sure to increase heapsize and set max equal to min (try 800mb, if your hardware has that resource) -
Error occurred while opening Web Analysis document.
Hi all,
I've a problem when i try to open some web analysisi report from work space that first worked fine.
The error is:
Error occurred while opening document.
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native: -2147219967 Error Reference Number: {3507FEFB-B38E-4B36-9399-5F3E6B5FAC6A}<BR>Num: 0x80040601;Type: 1;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 2360;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1491;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1245;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1203;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1067;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1390;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1331;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 804;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 1292;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 707;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: HsvALEQueryClasses.cpp;Line: 603;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 580;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPHFM;File: CHsvADMDriverACM2.cpp;Line: 785;Ver: 9.3.1.0.2042;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: CHsvDataQueryResults.cpp;Line: 209;Ver: 9.3.1.0.1502;<BR>Num: 0x80040601;Type: 0;DTime: 7/15/2009 10:38:35 AM;Svr: MIAK3HYPWEB;File: HsvADMDriverSessionInternal.cpp;Line: 4353;Ver: 9.3.1.0.1502;
Can someone help me on this?
Thanks
Best Regards
E. G.Can anyone help me too?
-
Hi Experts,
I am having an issue while opening a web analysis dashboard report. When I try opening it, web analysis runs for about 15 mins & then throws following error:
Error occured while opening document. Document ID = {0}
The report opens with its header having company log & two buttons, but data grid remains empty.
Kindly suggest me any way to resolve it.
Thanks,
KrishanHi Natesh,
Thanks for your reply to my query posted in this forum. Please find my inline answers between asterisk to your questions:
Whatz the source of your Grid? Relational SQL Query (OR) A spreadsheet with Essbase database connection file?
* Yes, the source is Essbase.*
If source is Essbase, it seems- Outline might've got altered when you're trying to refresh the report.
* The outline was in tandem when we tried running this report in WebAnalysis. This outline & WebAnalysis report which is in Dev Server is a replica of the one in Test Server where it runs fine. *
If source is based on a Relational SQL query, chances are that- Query is no longer valid.
* NA as this statement is NOT applicable to our source.*
If it's Essbase, it's also likely that- It ran out of time while fetching the data from Essbase. You may try playing around with the parameters in Essbase.cfg file.
* This might be one of the causes, but I double checked the all the tunning parameters in Essbase.cfg file in place.*
Could you please through more observation on this issue. Let me know if any further information is needed!.
Thanks for your time.
Regards,
Krishan
Edited by: user10475612 on Nov 8, 2009 1:07 PM
Edited by: user10475612 on Nov 8, 2009 1:09 PM
Edited by: user10475612 on Nov 8, 2009 1:12 PM -
Bypass the error messages while opening the Web Analysis 9.3.1 Report
I am using WA 9.3.1 to create a few reports. The login users will have some essbase meta-read security filters to restrict the access into certain regions and entities.
For example:
user a has the meta-read and read access of @idescendants (east);
user b has the meta-read and read access of @idescendants (west);
user c has all the accesses
However, in the first start-up page (Web Analysis 9.3.1 dashboard), I have a dashboard which contains all the regions access. When user a login, he shall only see his own dashboard (speedometers, etc.).
Currently the user login will get some error messages (such as "loading document produce error", etc). I wonder whether we can set the message level in Web Analysis so that there is no such error message while the user is opening the reports.
ThanksKaren,
Thanks for the reply.
I have checked my Web Analysis report, and I still have the error message of "Error Occur while opening document. Document ID = {0}" while using the some user id to login.
In my Web Analysis database connection preference, my setting is "user the user id and password". I have verified this (when I use "user a" to login, and in essbase connection, i can see the session with "user a").
In the WA report, however, I use the multiple-level combo box, so that it can give me different levels of entities, for example, the top level is all regions, the 2nd level is east/west/south/ ec, and the next level is cities, and so on. And if "user a" login, he will be able to see the all regions and east, and then east cities (of course, if he select all regions, there will be no data available).
Do you think this multiple level combo boxes can be the cause of this error message?
Thanks a lot -
i am getting the following error message while opening the fire fox browser "sript file:///programe % 20 files/siber%AT% 20roboform/Firefox/components/ref helper.JS:510 in English
ls -l /var/run/lighttpd/
And how are you spawning the php instances? I don't see that in the daemons array anywhere.
EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
You will note that with pre-spawned information, the config looks different[1].
You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
[1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change" -
Hi
Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
Thanks
Colin65Steve,
Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
Also please find details of storage devise,
Dogcam Portable Media Center PMC-500r
Quick DetailsModel Number:PMC-500R
SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co., -
"An error occurred while installing Adobe AIR"
I am running Vista Home Premium SP1, and I keep getting the
following error while trying to reinstall Air. After the install, I
get a dialog box telling me Air installed successfully. When I
click OK, I get a second box telling me: "An error occurred while
installing Adobe AIR. Installation may not be allowed by your
administrator. Please contact
your administrator."
This error has repeated itself time after time. Air had
installed fine a while back, but programs using it began having
problems with uprgrades, so I uninstalled them and uninstalled Air,
then tried to reinstall Air.
Here's the .airinstall.log file from the last install
attempt:
Performing runtime install
UI SWF load is complete
UI initialized
starting user confirmation
Installation type: new
starting elevated install
subinstaller: starting install
subinstaller: Scheduling runtime installation operations
subinstaller: Installed Product GUID: is same:false
subinstaller: Beginning runtime installation
subinstaller: Beginning install
subinstaller: Installing
c:\users\me\appdata\local\temp\air7233.tmp\setup.msi
subinstaller: Execution complete; beginning commit phase
subinstaller: Commit complete
subinstaller: install complete
Elevated install completed
subinstaller: begin quitting
Elevated install failed (3001)
runtime install entering error state: [ErrorEvent
type="error" bubbles=false cancelable=false eventPhase=2
text="Error #3001" errorID=3001]
begin quitting
Any idea what's wrong?
ThanksI am also getting an error. I first noticed it when trying to
install the jott express application. I then tried installing Adobe
air 1.1 standalone.
Both logs are attached.
Jott Log
Starting app install of
http://jott.com/jottexpress/jx.air
UI SWF load is complete
UI initialized
Unpackaging to
C:\WINDOWS\system32\config\systemprofile\TEMP\fla1DD.tmp
unpackaging is complete
application is bound to side-by-side version 1.0
application is bound to this version of the runtime
app id JottExpress
pub id 50E28EE2422BD0599F081C2408B1BFDDBEFC6B6B.1
application not currently installed
Waiting for user confirmation
User confirmed action: install
creating native installer in:
C:\WINDOWS\system32\config\systemprofile\TEMP\fla1DE.tmp
native installer creation complete
Starting install
Destination for installed application is d:\Program Files
Installed Product GUID: is same:false
Scheduling uninstall of product guid
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Beginning install
Installing
C:\WINDOWS\system32\config\SYSTEM~1\TEMP\AIR1D6.tmp\setup.msi
Uninstalling product w/ GUID
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Error occurred; beginning rollback: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
Rolling back install of
C:\WINDOWS\system32\config\SYSTEM~1\TEMP\AIR1D6.tmp\setup.msi
Rollback due to error complete
stateInstalling: [ErrorEvent type="error" bubbles=false
cancelable=false eventPhase=2 text="1612" errorID=0]
starting cleanup of temporary files
application installer exiting
Air Log
erforming runtime install
UI SWF load is complete
UI initialized
starting user confirmation
Installation type: additionalNewest
starting install
Scheduling runtime installation operations
Installed Product GUID: is same:false
Scheduling uninstall of product guid
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Beginning runtime installation
Beginning install
Installing
c:\windows\system32\config\system~1\temp\air1f1.tmp\setup.msi
Uninstalling product w/ GUID
{BB8B979E-E336-47E7-96BC-1031C1B94561}
Error occurred; beginning rollback: [ErrorEvent type="error"
bubbles=false cancelable=false eventPhase=2 text="1612" errorID=0]
Rolling back install of
c:\windows\system32\config\system~1\temp\air1f1.tmp\setup.msi
Rollback due to error complete
error during install: [ErrorEvent type="error" bubbles=false
cancelable=false eventPhase=2 text="1612" errorID=0]
runtime install entering error state: [ErrorEvent
type="error" bubbles=false cancelable=false eventPhase=2
text="1612" errorID=0]
begin quitting
updater called with args:C:\Program Files\Common Files\Adobe
AIR\Versions\1.0.6\Adobe AIR Updater.exe,-installupdatecheck -
Error occured while showing adobe form in abap webdynpro application
Dear SAP-Masters ,
This is the mail regarding the error occured while showing adobe form in abap webdynpro application .
When i run the adobe form seperately it works fine but with abap web dynpro , i'll get following error .
Pls tell me how to resolve this problem .
The following error text was processed in the system D35 : WebDynpro Exception:
The error occurred on the application server DV35_D35_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: UPDATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CPHi Arjun ,
Thanx for ur reply ,
i got following results in ST22 dump analysis :
' An exception occurred that was not caught ' .
and
Source Code Extract
Line
SourceCde
79
x_xml = get_wd_context_as_xml( data_source = data_source ).
80
m_pdf_object->set_data( formdata = x_xml ).
81
catch cx_fp_exception into lr_fpexc.
82
raise exception type cx_wd_general
83
exporting
84
previous = lr_fpexc.
85
endtry.
86
if fillable = abap_true.
87
if m_version is initial.
88
m_version = m_pdf_object->get_version_info( ).
89
endif.
90
if version < ''.
91
set_usage_rights( m_pdf_object ).
92
endif.
93
endif.
94
endif.
95
endif.
96
97
only call the ads if requested
98
if execute_ads_call = abap_true.
99
try.
100
set document
101
m_pdf_object->set_document( pdfdata = pdf ).
102
103
execute, call ADS
104
m_pdf_object->execute( ).
105
106
get result
107
m_pdf_object->get_document( importing pdfdata = pdf ).
108
catch cx_fp_exception into lr_fpexc.
>>>>>
raise exception type cx_wd_general
110
exporting
111
previous = lr_fpexc.
112
endtry.
113
endif.
114
115
endmethod.
and
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception:
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_FP_RUNTIME_SYSTEM", which was raised in the program
"CL_FP_PDF_OBJECT==============CP",
specifically in line 255 of the (include) program
"CL_FP_PDF_OBJECT==============CM02Y".
The cause of the exception was:
ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be
| imported into interactive forms.(201501). -
Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE>
<G_PLAN_CODE>
<PLAN_CODE>03101C3003</PLAN_CODE>
<PLAN_NAME>03101C3003_test</PLAN_NAME>
<PLAN_EM>John</PLAN_EM>
<PLAN_START_DATE>101.09.01</PLAN_START_DATE>
<PLAN_END_DATE>102.08.31</PLAN_END_DATE>
<PLAN_HOSTS>abc_super</PLAN_HOSTS>
<LIST_G_PURPOSE>
<G_PURPOSE>
<PURPOSE_CODE>11600000</PURPOSE_CODE>
<PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
<LIST_G_PURPOSE_CODE>
<G_PURPOSE_CODE>
<BUDGET_AMOUNT>0</BUDGET_AMOUNT>
<REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
<TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
<REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
<TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
<TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
<TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
</G_PURPOSE_CODE>
</LIST_G_PURPOSE_CODE>
<CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
<CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
<CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
<CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
<CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
<CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
<CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
</G_PURPOSE>
</LIST_G_PURPOSE>
<LIST_G_PLAN_SUBSQL2>
<G_PLAN_SUBSQL2>
<GL_DATE>31-07-12</GL_DATE>
<NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
<AP_UNAPP></AP_UNAPP>
<PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
<PLAN_CODE1>03101C3003</PLAN_CODE1>
<PLAN_EM1>Elly</PLAN_EM1>
<PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
<PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
<PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
<REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
<DESCRIPTION>101 year</DESCRIPTION>
<CF_GL_DATE>101.7.31</CF_GL_DATE>
</G_PLAN_SUBSQL2>
</LIST_G_PLAN_SUBSQL2>
<CF_START_DATE1>99.1</CF_START_DATE1>
<CF_END_DATE1>102.11</CF_END_DATE1>
<CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
<CF_OU_NAME1>IT Department</CF_OU_NAME1>
<CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
<CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
<CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
<CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
<CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
<CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
<CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
<CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
<CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
<CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
</G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
Maybe you are looking for
-
Problem with message monitor in pi 7.4 ( AEX)
Hi All, I have been wondering if the SXMB_MONI features are all intact in the JAVA only stack. While in the ABAP stack i could see the XI SOAP header but in the new stack i only see XML message -> payload without the message headers, Was wondering wh
-
Can't Adjust Brightness in Windows 7
I recentlly installed win 7 rc on my G530 and i cannot adjust the brightness anymore. i download the hotkey features driver which now allows me to adjust the volume and everything except screen brightness...is there a specific driver i have to downlo
-
I have the following button design that I'm aiming for: http://i.imgur.com/nCymK5L.jpg Could someone advise how I'd add an image to the left side of the button? Also, if anyone could advise if I can add the thin black border easily? My current markup
-
When I sync some albums show as a different album for each song
When I sunc my iPod Toucn with software version 5.0 some albums split up into each song beinga separate album which means you can't listen to the complete album anymore. Any idea how I can solve this problem ? Thank you in advance
-
Hi, Could anyone tell me please what parameter I have to set if I want to do an initial load stating with a given date (eg. 1/1/2009)? I configured $$INITIAL_EXTRACT_DATE, but I noticed a different date for fact tables. Which is the meaning of the fo