Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Dear Experts,
Could anyone help me to fix this issue?
I have an Customer exit variable in my query to calulate the first week of the prior year value as per the system calendar. when i execute the query, I am receiving the following error messaged and i am throwing out from the BW server.
The error message is
Error Specify a value for variable ZR00**
Abort System error in program SAPLRRK0 and form APPEND_KHANDLE_1-01-
Many thanks in advance.
Regards.
Krishna.

Hi Kishor,
try runnig the same query in RSRT, with execute and debug option.
Also check in query designer for its correctness.
Hope this helps...
Regards,
umesh

Similar Messages

Error-Specify a value for variable

Dear All,
We upgraded our BW system to BI 7 SP 15. We are getting following error when executing queries in Bex.
Specify a value for variable Company Code
    Message no. BRAIN629
Diagnosis
    The variable cannot be empty. You must make an entry in the variable
    maintenance for variable Company Code.
System Response
Procedure
    Enter a value. Use the search help (F4) if necessary.
Procedure for System Administration
Interesting thing is that this error is faced by only 2 users in all upgarded systems.
We created test user with same roles and we are getting error for these test users as well. All other users can run these queries without any problem. When we gave them sap_allprofile, it worked but I dont think this an authorization issue as these user can execute reports in web without any error.
Second interesting thing is that, I applied note 1085822. This solved the problem. But on next day while closing this issue formally we found it is not working again and giving the same error.
I checked other notes but these are not suitable for SP15.
Any pointer/help will be well appreciated.
Regards,
Niraj

Hi All,
Resolved this issue by giving authorization obj S_BDS_D value display.
Regards,
Niraj

Error that "specify a value for variable posting period (single value entry

hi
My query is running testing fine in RSECADMIN under some username..but when i try and open it using analyzer (under same username) it gives me error that "specify a value for variable posting period (single value entry, mandatry)" it does'nt even asks to enter variable values and gives this error message.
However the same query appears to be working fine under different username.
plz advise.

Hi Abhinav,
Just do one thing compare the Roles of two different users for which Query is getting executed and not.
Check the Object S_RFC.
Compare the Objects detail for Both the Users.
Please Assign points if useful.
Regards,
Rajdeep.

ERROR: Specify a value for variable Business

Hi All,
We have a query which is working properly while executing from RSECADMIN for Particular User. But if we execute the same query from Query Designer then it is showing below error message for that user. At the same time other user are able see report.
When I removing all the Mandatory Variables in Query Designer then it is working fine for the same user.
Please suggest how can I reslove this strange issue.
Regards,

Thanks Devi,
This problem is occuring only for one particular user rest of the users are able to execute the report. We are now BI 7.01 version.
Please let me know if we can still impliment this SNOTE or do we have any alternative solution.
Regards,

Abort Could not determine a value for variable 0DAT from the authorizations

Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.

Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye...

For Grant nnnnnn, specify a value for object FUND error -Urgent

I work in SRM area and my knowledge of Grants management is almost nil. We have a PO in SRM which has account assignment associated with a Workorder and Fund. When we look at the Grant it has all green lights and is confirmed by our FI/CO team everything is correct. But since R/3 is giving this message "For Grant nnnnnn, specify a value for object FUND" , I am sure there is something missing somewhere. Some additional information, the PO is from last fiscal year but it was changed for account assignment this fiscal year. But we checked the Fund itself is valid for some more time to come.
Any ideas on which transaction codes to see, what to look at etc. will be appreciated.
Thanks

Hi Manjula,
You have been facing this issue becuase the sequence of the fields while mapping them is not perfect, hence the 0date field is capturing some other data rather than picking the exact date value.
Check the order of fields and match it with the file (if you are loading data from a flat file)
Also, have a look at the weblog which talks about general mistakes in loading from file.
/people/sergio.locatelli2/blog/2006/11/02/upload-file-in-bw-common-mistakes-and-hints-to-take-in-mind
Cheers!
Amit

Missing substitution value for variable [dispatcher.host]

Hello,
I'm getting the error message "com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [dispatcher.host]." if I'm trying to deploy an SCA file via SDM (remotegui.bat).
It seems that the problem is a missing variable setting. But I couldn't find any hints at the available SAP web sources which values needs to be set.
It would be really great if somebody could give me a hint which steps I need to do to solve this issue.
Many thanks in advance,
Steffen Zimmermann
Here is the whole GUI log :
==========================================================================
08/11/26 21:31:15 - ***********************************************************
08/11/26 21:31:35 - Start updating EAR file...
08/11/26 21:31:35 - start-up mode is lazy
08/11/26 21:32:45 - com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [dispatcher.host].
                          at com.sap.engine.deploy.manager.DeployManagerImpl.makeTempEar(DeployManagerImpl.java:3747)
                          at com.sap.engine.deploy.manager.DeployManagerImpl.makeNewEar1(DeployManagerImpl.java:3715)
                          at com.sap.engine.deploy.manager.DeployManagerImpl.deployUpdateAction(DeployManagerImpl.java:529)
                          at com.sap.engine.deploy.manager.DeployManagerImpl.deploy(DeployManagerImpl.java:513)
                          at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:186)
                          at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
                          at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
                          at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
                          at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
                          at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
                          at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
                          at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
                          at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
                          at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
                          at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
                          at com.sap.sdm.app.view.controllers.DeployEventProcessor.processEvent(DeployEventProcessor.java:11)
                          at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.processEvent(DeployCmdProcessor.java:264)
                          at com.sap.sdm.client_server.deployserver.DeployCmdProcessor.process(DeployCmdProcessor.java:108)
                          at com.sap.sdm.gui.server.GuiAdminRoleCmdProcessor.process(GuiAdminRoleCmdProcessor.java:72)
                          at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
                          at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
                          at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
                          at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
                          at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
                          at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
                          at java.lang.Thread.run(Thread.java:534)
08/11/26 21:32:45 - ***********************************************************
Nov 26, 2008 9:32:45 PM Info: End of log messages of the target system.
Nov 26, 2008 9:32:45 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Nov 26, 2008 9:32:45 PM Error: Aborted: development component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1'/'1', grouped by software component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1000.8.4.1.0.20081125093532''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy API:
com.sap.engine.deploy.manager.MissingSubstitutionException: Missing substitution value for variable [dispatcher.host].
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Nov 26, 2008 9:32:45 PM Info: Starting to save the repository
Nov 26, 2008 9:32:49 PM Info: Finished saving the repository
Nov 26, 2008 9:32:51 PM Info: Starting: Initial deployment: Selected software component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1000.8.4.1.0.20081125093532''/'0' will be deployed.
Nov 26, 2008 9:32:51 PM Error: Aborted: software component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1000.8.4.1.0.20081125093532''/'0':
Failed deployment of SDAs:
development component 'Cognos8BI'/'cognos.com'/'Cog8BIFactory'/'1'/'1' : aborted
Please, look at error logs above for more information!
Nov 26, 2008 9:32:51 PM Info: Starting to save the repository
Nov 26, 2008 9:32:52 PM Info: Finished saving the repository
Nov 26, 2008 9:32:53 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.

Thank you.
Yes, it was a really not a default variable.
Replacement of the variables directly at the archive with the correct value did solve the issue.

Could not determine value for variable 0P_FVAEX (or 0P_CTPCA)

I get the below error while accessing a query on the planning Info Cube. I used the SAP Exit variable Most Current Data (Transactional InfoCube) (0S_RQTRA) in the query for the Characteristic - Request ID (0REQUID) to extract the data from the yellow request too.
I do not use the below variables as in the below eror in my query at all. Please assist.
Diagnosis
This error diagnosis is specific only to the variables 0P_FVAEX or 0P_CTPCA !
Termination message BRAIN 632 appears:
Could not determine value for variable 0P_FVAEX (or 0P_CTPCA).
System Response
1. Operation method of SAP-Exit-Variables 0P_FVAEX or 0P_CTPCA
With queries from the CO application, both SAP-Exit-Variables look for an entry for 'controlling area'. With this controlling area from the selection screen, the SAP-Exit-Variables program reads the attributes for InfoObject 0CO_AREA (controlling area).
With queries from the FI application, the SAP Exit Variable 0P_FVAEX looks for an entry for 'company code'. With this company code from the selection screen, the SAP Exit Variables program reads the attributes for InfoObject 0COMP_CODE (Company Code).
0P_FVAEX determines the fiscal year variant (attribute 0FISCVARNT) from the attributes for 0CO_AREA (CO queries) or 0COMP_CODE (FI queries). 0P_CTPCA determines the currency type of the profit center local currency (attribute 0CURTP_PCA) from the attributes for 0CO_AREA.

Hello,
you need to take a closer look at your query. Somewhere you used one of the 0P_* exit variables, which work only for controlling related InfoCubes. Use your own variables.
Regards,
Marc
SAP NetWeaver RIG

Default value for variable are not within permitted value range (precalc)

Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]

Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai

SAP BEX Analyzer Set values for variables

Please help us out in sorting out this problem,
We are automating BEx Analyzer for a Testing Project with Quick Test Professional (QTP) a functional automation tool uses VB script.
Problem:
There are 5 steps in automation
Invoke BEx Application
Log in to BEx server
Run Query
Set values for Variables for Query
Display Report
We are able to do 1,2,3 steps using BEx API functions and running BEx macros but we struck up with 4th step,
1. Invoke BEx Application
Launch Excel
Dim app
Set app = createobject("Excel.Application")
Make it visible
app.Visible = true
Attach add-in to Excel file
app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SetStart")
2. Log in to BEx server
Login to Bex server
Function logonToBW(app)
Dim myConnection
Dim logonToBW2
On Error Resume Next
logonToBW2 = True
' Create logon to system with following user and system details
Set myConnection = app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'! SAPBEXgetConnection")
With myConnection
.client = "600"
.User = "USERNAME"
.Password = "Welcom123"
.Language = "en"
.systemnumber = "00"
.System = "BWDCLNT600"
.systemid = "BWD"
.ApplicationServer = "156.158.7.161"
.SAProuter = ""
.Logon 0, true
     If .IsConnected = 0 Then
           .Logon 0, False
If .IsConnected <> 1 Then
MsgBox "Automatic logon failed. Please enter your username and password in the next screen ..."
Exit Function
End If
End If
End With
' Run connection query to see if connected
app.Run ("'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXinitConnection")
logonToBW2 = True
End Function
3. Run a Query
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'! runQuery", "ZZCCA3_M01_Q0003"
Till here the script is running fine then the Select values for Variables window is displayed.
This is where exactly we struck up; in this window we need to select values.
Name of the Fields
     Field Name     Technical name of characteristic     Variable Name     Value
1     Company Code                     0COMP_CODE     ZM_COMPCODE     1000
2     Cost Center Hierarchy          0COSTCENTER     ZS_CCTRN     1000MDON
3     Cost Center Node     0COSTCENTER     ZS_CCTRN     1000COP
4     Cost Element          0COSTELEMENT     ZS_COELN     1000GDON_6999
5     Fiscal Year     0FISCYEAR     0P_FYEAR     2007
To select values for variables, we are trying below code but its giving an error,
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000, "0COMP_CODE"
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000MDON, " 0COSTCENTER "
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000COP, "0COSTCENTER"
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 1000GDON_6999, "0COSTELEMENT "
app.Run "'C:\Program Files\SAP\Business Explorer\BI\BExAnalyzer.xla'!SAPBEXSetFilterValue", 2007, " 0FISCYEAR"
Any help highly appreciated, thanks in advance.

Hi Reinhard,
Pleas look at this:
Passing a range to SAPBEX.XLA!SAPBEXSetFilterValue
Best regards,
Eugene

"You must specify a value for this required field" in SharePoint list

HI All,
I have a couple of taxonomy fields in my content type. When I try to add a new item with my content type and save, I'm getting an error message "You must specify a value for this required field" against each taxonomy field. I'm not sure what am
I missing. I deleted the content type and added that again to my list but still no luck. Can someone please help me out? Thanks.
Regards,
SC Vinod

hi
it depends how you updated existing field. We faced with the problem that update of taxonomy site column was not propagated to the lists. In Sharepoint when content type is bound to the list, new hidden content type is created for that list - you may check
it if will enumerate
SPList.ContentTypes property. And when you try to update site column changes may not be propagated to these list content types. In order to update it you need to get reference on a field from list content type and update if explicitly.
Blog - http://sadomovalex.blogspot.com
Dynamic CAML queries via C# - http://camlex.codeplex.com

Adjusting Portal Pages throws "Specify a value for the property {0}"

I found (with the help of our friends at OSS) the setting I need to change with to adjust the Runtime frame size for Guided Procedures.
It's quite logical really, since GP is just a bunch of pages in the portal it would make sense to find them in the Portal Content option ... So there it was.
Content Administration > Portal Content
Search for content and go to Process Instance. The following part shows the 3 main content parts of the GP Runtime window. As you can see in the third container are the two elements that contain your content. "Content Area" and "Public Content Area".
Open those two areas (scroll down in the list in the middle, select one and press open) and change the value of Height Type from "Fixed" to "Automatic" or "Full Page".
This is where I get my error (see the link below for a screenshot as well): When I try to change a value, any value or just open for modifying and try saving again (without changing anything) I get this error:
[http://wow.telenet.be/delaware/property0.jpg]
Specify a value for the property
Now I don't know if there any portal expert watching this thread, but it seems as though all those pages have been wrongly configured from the start. And until I figure out the right configuration I won't be able to save them either way.
My question is two-fold:
1) Can anyone provide me with all the settings he has for this component so I can compare them to mine?
2) How do I fix this error? I'm assuming every page in the portal gives the same error?
Thanks in advance,
Frederik-Jan
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM

I found (with the help of our friends at OSS) the setting I need to change with to adjust the Runtime frame size for Guided Procedures.
It's quite logical really, since GP is just a bunch of pages in the portal it would make sense to find them in the Portal Content option ... So there it was.
Content Administration > Portal Content
Search for content and go to Process Instance. The following part shows the 3 main content parts of the GP Runtime window. As you can see in the third container are the two elements that contain your content. "Content Area" and "Public Content Area".
Open those two areas (scroll down in the list in the middle, select one and press open) and change the value of Height Type from "Fixed" to "Automatic" or "Full Page".
This is where I get my error (see the link below for a screenshot as well): When I try to change a value, any value or just open for modifying and try saving again (without changing anything) I get this error:
[http://wow.telenet.be/delaware/property0.jpg]
Specify a value for the property
Now I don't know if there any portal expert watching this thread, but it seems as though all those pages have been wrongly configured from the start. And until I figure out the right configuration I won't be able to save them either way.
My question is two-fold:
1) Can anyone provide me with all the settings he has for this component so I can compare them to mine?
2) How do I fix this error? I'm assuming every page in the portal gives the same error?
Thanks in advance,
Frederik-Jan
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM
Edited by: Frederik-Jan Roose on Apr 1, 2008 11:33 AM

Value for variable *** hierarchy Version is invalid

hi ALL
for one Of the user, when he tries to run the report he is freequently facing this situation. he is getting the error like : "Value for variable *** hierarchy Version is invalid" . but the same report is working for other users.
The starange part is . those variables are not mandatory selections, they are userentry optional values.
we tried with authorization team also . that is not the probelm.
how can i solve this...
any ideas?
Praveen.
Message was edited

Praveen,
Please check if there is any "Personalization of variable" setting for that variable.
Raju

System error in program SAPLRRK0 and....Value '_' of characteristic 0EMP...

Folks,
We are using ESS/MSS business packages for integration with BW backend, on trying to access status report using,
Manager Self - Service --> Reports --> Development Discussion Status Reports
We are getting the following warning & error messages on the portal screen:
Value '_' of characteristic 0EMPLOYEE is not a number with 000008 spaces
System error in program SAPLRRK0 and form SET_SIDFIX_01-01-
On the face, it looks like a BW error (a BEx query error) being propagated and getting caught by the portal screen.
Any pointers in resolve this will be appreciated with maximum points..
Please let me know.
Cheers
Paras

Thanks Nikhil,
Request your guidance on this, I am new to ESS/MSS business packages and using BW as a backend.
Can I expect to have any errors in configuration (from the portal end) for this kind of error/messages to come up ? If yes, pls gimme pointers to resolve this discrepancy or is this some BEx query error due inconsistencies in employee master data ?
Please let me know.
Paras

Abort system error in program SAPLRRK0

Hi All,
I have gone thru many forums and I also read a post of similar problem but I think mine is diff from all of them.
When one of user is running the Query he is seeing a error message saying:
ABORT system error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-.
Once he close the session and open back he is ok. I tried to refresh on my PC and I am ok and I didn't see any messages. I really don't have any idea why this is happening.
I read OSS note-734184 but it's not detailed.I don;t think we can apply support pack now because they are crunning their month end reports and there is no time to do that now.
Your responses are really appreciated!
Thanks
AP

Praveen,
Thanks for the quick info.
I went to SM21 and I saw this message on that user R49 Communication error, CPIC return code 020, SAP return code 223
But I don't know is this message related to that and because I am seeing same message for another user and she don't have any issues at all with the same query.
That surprises me!
Any clues?????

Error Specify a value for variable-Abort System error in program SAPLRRK0 a

Similar Messages

Maybe you are looking for