Error: SQR configuration and the BRB datasource definition..
<p>Hello,</p><p> </p><p>I've had Hyperion installed on my computer for about 6 months. Ihave two existing connections to seperate servers with DB2databases. I use existing ODBC drivers for the connection. I wastrying to install a third connection to a server/database and madesome changes to perhaps the driver. When I try to run a report nowI seem to connect and get an error : Failed to produce HTML outputfile. Most likely causes include: SQR configuration and the BRBdatasource definition used for this report. I get this error forall the connections now. I've tried unistalling and reinstallingthe software. I've checked the SQRDIR and BRIO_HOME and they seemedgood. I have the server installed on my computer.</p><p> </p><p>Are there any suggestions as to what I might have done tocreate this error?</p><p> </p><p>Thank you,</p><p> </p><p>Sheila</p>
What is the content of the file %PS_HOME%/sqr/opsys.sqc ? What version of Windows ?
How many processes are running simultaneously ?
Did you try to run it manually ?
Nicolas.
Similar Messages
-
I'm trying to prepare some new iPads using Apple Configurator and the download of IOS8 failed.
The error in Apple Configurator is "Unable to download iOS 8.0. The firmware image was corrupted. Please retry the operation."
Is there a way to get the Apple Configurator to try to re-download iOS 8?Apple Support had me delete the image file from the following location:
~/Library/Containers/com.apple.configurator/Data/Library/Caches/com.apple.confi gurator/firmware/
The file name was iPad3,4_8.0_12A365_Restore.ipsw
I deleted this file and ran the prepare again and it download the iOS 8 ok and successfully prepared the iPad. -
I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks
Click here and follow the instructions.
(98724) -
Fatal Error has occured and the application is being terminated
It seems that Captivate is eating my projects. I've started my second project (after completing my first without any errors) and I'm constintly getting corrupted files. It set me back at least a few hours worth of work. So I started creating backup files every 10mins, regardless of how much work i've done. Everything was going fine, until I took an hour break and went to resume my work.
When I try to open my file I get the following pop up message when trying to open my file: "Adobe Captivate - A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folder as .cpbackup files. Please restart Adobe Captivate."
I can click on the program workspace and not click ok on the error message to keep the file open. I see my slides and objects, but all the text is missing.
I'm using Captivate 5.5 and windows 7 64. Within Captivate, I'm using standard objects with importing MP3 audio files and some Photoshop images. I have a total of 4 slides with 1 being 3.5mins long and the rest are less than 1min.
When I first started having this problem, I thought maybe the variable files were corrupte so I deleted the Users/name/appdata/local/adobe/Captivate5.5 directory to see if that was the issue. That was before this last stint of errors.
I tried opening a backup that was like 10 saves ago, but it displays the same message.
I'm not sure what to do next.Failed to back up the data. A fatal error has occured and the application is being terminated.
This question is Not Answered.(Mark as assumed answered)
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD -
Failed to back up the data. A fatal error has occured and the application is being terminated.
hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CDWe have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content. -
In "purchases" while in my App Store, Mountain Lion says, "an error has occurred" and the green 'download' button is grey and I cannot re-start the download. I was abroad when I purchased this app and during download, my internet connection was lost. At the time, Apple was still offering the e-chat, so I did that and the man was very helpful and it was a quick fix, so my download button turned green again, and I was able to begin the download. BUT during the download, I was kicked offline once again, and I decided to wait until I was back in the USA. I will go in to an Apple store and ask assistance, but if there is something I am missing, I'd like to try that first. Thanks in advance for any advice.
Welcome to the support forums.
Please ask this question in the Mac App Store forum where they can better assist you. -
When trying to update my software, I get "an error occurred" message, and the update gets cancelled. How can I fix this?
I have found other threads with this problem. The problem is that you are using your iTunes account on another user at the same time you want to update software. Just close iTunes from that user. See > https://discussions.apple.com/thread/4577180?start=0&tstart=0
-
iphone 4s stopped in middle of update (via wireless). apple logo and usb picture appeared on phone. When i plugged in to computer, indidcated I would have to restore. in the middle of restoring, i got a "unknown Error" (1) code and the apple id and usb picture are frozen on screen. Anyonw know what to do?
Hello Maxayla,
It sounds like you are getting error code 1 when you were attempting a restore. I would use these troubleshooting steps from the following article which mentions that error code:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#1
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
When sharing a project I get "frame 72938 (error -1)." and the sharing is stopped. What is this and how do I fix it. Thanks, Kerry
I have an iMac, Processor: 2.7 GHz Intel Core i5, memory: 8 GB 1333 MHz DDR3, OSX 10.7.5, FCPX 10.0.8. I have no third party plugins. First time responding to community. Forgive any protocol errors.
Been working on variety of work projects for months prior to update with no problems. Took time off for a simple new project after updating to 10.0.8. Finished this small (11 minute) new project that is a combination of video and stills, with a few titles and simple transitions. Plays fine within FCPX, however, ran into same problem that started this chain, ie cannot share/export without getting same error message stated above related to a faulty frame.
Tried several share/export Master File settings. Tried moving project (from within FCPX) to another drive which resulted in same error message, but related to other different frames. Tried replacing original data in affected frame with freshly exported replacement files using QTime. Same problem again. Was able to export to Compressor, but resulting ProRes 422 file was so jumpy it wasn't usable.
Tried suggestions of Mark M 98021 and Hank LV, ie, halting all rendering in preferences and deleting render files. After this, I was successful in sharing/exporting at will.
I have several other major projects that I am afraid to return to. I'm not an expert at the inner workings of FCPX and don't have time to keep dealing with this issue. I can leave rendering off, but not a satisfactory solution. Not sure if old rendered files might become infected.
It would seem that there is a problem in the update. I hope this is corrected so I can continue with my work. -
I was trying to capture a simulation when a pop-up window came with this error:
"A fatal error has occurred and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.Please restart Adobe Captivate."
I tried every possible solution but i am getting the same error. Even now, i am not able to open a blank project. I cleared Preferences and Cache, Restarted the system, uninstalled and re-installed captivate but the error occurs.
Please help.Having admin rights is not the same as 'Run Captivate as administrator'. For the last, right-click on the start icon for Captivate and check 'Run as administrator'. Or click on Advanced, where you can check the option to always run as administrator.
Another possibility could be a corrupt font somewhere. I forgot to ask which version you are using (exact number). -
Error: Invalid configuration for the JMS adapter
Hi!
I'm doing a test with CEP to get messages from a JMS WebLogic queue but I'm getting the following error:
<BEA-2045010> <The application context "Teste" could not be initialized: org.springframework.beans.FatalBeanException: Error in initialization context lifecycle; nested exception is java.lang.IllegalArgumentException: Invalid configuration for the JMS adapter, you must Bean or specify a converter or a type of event.
Teste.context.xml:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:osgi="http://www.springframework.org/schema/osgi"
xmlns:wlevs="http://www.bea.com/ns/wlevs/spring"
xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
xsi:schemaLocation="
http://www.springframework.org/schema/beans
http://www.springframework.org/schema/beans/spring-beans.xsd
http://www.springframework.org/schema/osgi
http://www.springframework.org/schema/osgi/spring-osgi.xsd
http://www.bea.com/ns/wlevs/spring
http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
http://www.oracle.com/ns/ocep/jdbc
http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
http://www.oracle.com/ns/ocep/spatial
http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
<wlevs:event-type-repository>
<wlevs:event-type type-name="Pet">
<wlevs:class>testewithprotobuf.MyPet$Pet</wlevs:class>
</wlevs:event-type>
</wlevs:event-type-repository>
<wlevs:adapter id="pet_messageAdapter" provider="jms-inbound">
<wlevs:listener ref="pet_inputChannel" />
<wlevs:instance-property name="converterBean"
ref="PetMessageConverter" />
</wlevs:adapter>
<wlevs:channel id="pet_inputChannel" event-type="Pet">
<wlevs:listener ref="pet_messageProcessor" />
</wlevs:channel>
<bean id="PetMessageConverter" class="testewithprotobuf.PetMessageConverter" />
<bean id="PetBean" class="testewithprotobuf.PetBean" />
<wlevs:processor id="pet_messageProcessor">
<wlevs:listener ref="pet_outputChannel" />
</wlevs:processor>
<wlevs:channel id="pet_outputChannel" event-type="Pet">
<wlevs:listener ref="PetBean" />
</wlevs:channel>
</beans>
My converter class:
import java.util.Collections;
import java.util.List;
import javax.jms.BytesMessage;
import javax.jms.JMSException;
import javax.jms.Message;
import testewithprotobuf.MyPet.Pet;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.google.protobuf.InvalidProtocolBufferException;
public class PetMessageConverter implements InboundMessageConverter {
@SuppressWarnings("rawtypes")
@Override
public List convert(Message message) throws MessageConverterException,
JMSException {
BytesMessage bytesMessage = (BytesMessage) message;
long bodyLen = bytesMessage.getBodyLength();
byte[] buffer = new byte[(int) bodyLen];
bytesMessage.readBytes(buffer);
try {
Pet pet = Pet.parseFrom(buffer);
return Collections.singletonList(pet);
} catch (InvalidProtocolBufferException e) {
throw new MessageConverterException(e);
Please, what's wrong?
Thanks!This error usually indicates that you have both event type and converter bean specified or neither specified. In your case, that doesn't appear to the case from looking at the spring file. Could you also paste the contents of your configuration file from META-INF/wlevs directory?
-
Error in Configuration and End to end monitoring
Hi all,
I am getting error in RWB under configuration and end to end monitoring.
End to end monitoring iam getting
"Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
and under
Configuration
"Cannot read the configuration for the selected domain because the system was unable to connect to the monitoring server (possibly due to incorrect logon data). Error message: Neither the messager server nor the application server can be reached for system pirdev.titan.co.in"
Please help me.
Regards
Pradeep P NHi,
Have you gone throgh these threads.
Neither the messager server nor the application server can be reached
Error when I click "End-to-End monitoring" in XI runtime workbench
Neither the messager server nor the application server can be reached
Regards
Goli Sridhar -
Error: Invalid Configuration Terminating the Palm Desktop
I run Windows Vista and I have a Zire 22. Norton was running this afternoon and telling me that I was running out of on line back up storage so I cleaned out some files and I thought I had just deleted some junk but now, when I try to launch Palm, I get "Error: Invalid Configuration Teminating Palm Desktop".
How do I fix this please ? Thanks.
Post relates to: Palm Z22You have to reinstall the palm desktop. Here is the link http://kb.palm.com/wps/portal/kb/na/zire/z22/unlocked/solutions/article/32859_en.html where you can download the 6.2 version.
-
Tiny doc error? Configuring+and+Using+Coherence+Extend
This page:
http://coherence.oracle.com/display/COH35UG/Configuring+and+Using+Coherence+Extend
mentions the string "dist-extend-direct" only once. Is that intended just as an example of something that would match against
<cache-name>dist-*</cache-name>
or was that an error? It seems like it should be mentioned explicitly in the XML config file examples on that page.
-AndrewHi Andrew,
It is the former. It is intended as an example of a cache name that would match the "<cache-name>dist-*</cache-name>" cache mapping in the cluster cache config.
Patrick -
I have bought a book from iBook. My credit card was charged and the book was downloaded. There is an error and the first 12 chapters are not there! The book has the prologue and info and then chapter thirteen. How do I get the whole book?
I have bought a book from iBook. My credit card was charged and the book was downloaded. There is an error and the first 12 chapters are not there! The book has the prologue and info and then chapter thirteen. How do I get the whole book?
Maybe you are looking for
-
Cannot locate file, even after it's copied to itunes
I download a mp3 from a radio show I like everyday. I use to be able to download the file to my desktop, and then drag it to the right playlist in itunes. After it's in itunes, I would delete the one on the desktop and I would have it in my library a
-
I cannot get Firefox to even open on my Mac desktop. It crashes every time I try to use it and it will not even allow me to send a report. Some sites I need to visit caution me not to use Safari, but that Firefox is safe. If I cannot even get it to o
-
i get a pop-up window saying the current version of Safari does not support the community toolbar. How do I get rid of this?
-
Impact of Windows system cache to Essbase
As we know that Windows OS has a system cache buffer to cache data files under OS environment. And Essbase also has its own cache mechanism to cache some data block into physical memory. If we have many physical memory left, Windows will utilize the
-
Hi all, I recently installed CS6 onto my Windows 8.1 machine (it's a relatively fresh install FWIW). I have more than enough memory (8gb) and my video card is a Radeon R9 280. I have installed all the latest drivers for all my hardware, and am runnin