Error Stack Monitoring.

Hi
In my BI system, i am using lot of DSOs and required to use error stack for most of them. What i know that each DSO has its own error stack table, but daily i can't check all the requests or error stack tables.
I am looking for 1 centralized Error Stack table that should tell me that this DSOs have data in error stack, and then i could look individually. Could u pls guide me is there any centralized error stack table or any other way i could monitor all error stacks at one place....
Thank You!

Yes i got it. Thanks
This is /message/4687379#4687379 [original link is broken]

Similar Messages

  • Error Stack in Expert Routine, Infos about Object Log

    Hi all,
    currently I try to find some information about using the error stack in combination with an expert routine. So far I know that I have to use the Object Log, which is already in place in my code for monitor messages.
    LOOP AT itab_input INTO wa_input.
    IF sy-subrc <> 0.
            CLEAR msg.
            msg-msgid = 'MY_CLASS'.
            msg-msgty = 'E'.
            msg-msgno = '002'.
            msg-msgv1 = v1.
            msg-msgv2 = v2.
            msg-msgv3 = v3.
            APPEND msg TO t_msg.
            " ??? Write wa_input to error stack???
            CONTINUE.
          ENDIF.
    ENDLOOP.
    Does somebody know how I could append wa_input to the error stack? Or does somebody have a good documentation about Object log?
    Thanks a lot!
    Nita

    Good Morning,
    thanks a lot for your input. I tried to implement this function, but I do not know where I could get the Segment Id from.
    Do you know what i_use_crosstab is used for? I think i_with_message should be set to 'X' if I want to write wa_input-record it to the error stack.
    CALL METHOD log->verify_record
              EXPORTING
                i_use_crosstab  = ''
                i_segid         = lv_segid
                i_record        = wa_input-record
                i_with_message  = 'X'
              RECEIVING
                r_skip          = lv_skip
              EXCEPTIONS
                too_many_errors = 1
                not_in_crosstab = 2
                OTHERS          = 3.
    From semantic point of view the coding should do following:
    - To avoid a second loop in my expert routine it should only check the current src record. If this is wrong, which I already determine in my coding, it should write the record in the error stack. If it is correct, it should check whether there are already records with the same semantic key in the error stack and if yes, add it also to it.
    - I assume that I have to delete this record manually from my src. package than.
    Cheers
    Nita

  • How to populate the Error stack during error records in field level routine

    hi,
    I am capturing the error records in Field level routine in transformation. now i want these records to reflect in error stack.
    i am using 'Append monitor-rec to MONITOR' at the moment but i cant see any records in error stack.
    but when i am using the same statement in start routine i am getting records in error stack.
    can anyone please help as to how can i populate error stack through field level routine?

    Hi,
    Try to do it in the end routine instead of the field routine.
    It should work.
    Regards,
    Joe

  • How to fill the error stack

    Hi,
    we want to check the data quality of the source in the start routine, process the good in the target and the bad in the error stack. Have you any idea which exception I have to raise to put it in the error stack?
    regards, Adrian

    Hi Adrian,
    you have to use skip record exception in a transformation routine. If this exception is rissen, the return code of the routine is unequal to zero and the data row is moved to error stack.
    If you create a transformation routine there is a short example given how to rise skip record exception. Skip value exception wont help, it will only clear the result and returns a blank or zero to the target.
    Please be aware of that the exception neither exits in start nor in end routines. There is no errorhandling on row level possible.
    Additionally create monitor entries to describe the error you are creating with calling the exception. It's recommended to create your own message class to do so.
    Regards Michael
    edit
    Remember switching on error handling in DTP configuration
    Edited by: Michael Seifert on Aug 12, 2008 1:46 PM

  • How do I clear or delete the DTP ERROR STACK..?

    HI Experts
    I have a number of records written to a DTP Error Stack for a Master Data load. Subsequent executions of the DTP result in further records being written to the stack if they have the same semantic key (even if they are not in error).
    I know I can execute an Error DTP to clear the stack.
    But is there any way to clear the stack rather than running the Error DTP? I don't want the records in error to be processed through to the InfoObject. I only want the subsequent records to go through, without going into the error stack.
    tony

    Hi Tony,
    you have to remove the request from the target to delete the records from the error stack. If you don't want to reprocess them, try to avoid moving them to the error stack. One way is to skip the records without creating a monitor entry, so the system doesn't recognize the error and it's not shifted to the error stack, the other one is to delete the record from the source or result package throug a routine.
    Single Record deletion iin the error-stack is not possible. For further information read this thread:
    Delete & Automate deletion of Error Stack
    Regards Michael
    Edited by: Michael Seifert on Nov 20, 2008 4:04 PM

  • CX_RSROUT_SKIP_RECORD & Error Stack.

    Hi. I want to load certain records from the RESULT_PACKAGE (End Routine),  that don't meet a condition to the Error Stack.
    So, I am using RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD, to fill the error stack. But this statement is not filling up the error stack.
    Any suggestions.
    Thanks.

    Hi JD,
    The end_routine call from the  generated transformation program lies in between TRY and ENDTRY.
    In the genereted program there will be the logic to catch the exception CX_RSROUT_SKIP_RECORD from end_routine.
    TRY.
            i_r_log->add_substep( 'ROUTE' ).
    *<<<    Rule ID: '27'.
            _curr_rule-ruleid = '27'.
    *       Step ID: '1', Type: 'ROUTINE'.
            _curr_rule-stepid = '1'.
            CALL METHOD me->end_routine
              EXPORTING
                request        = l_request
                datapackid     = i_r_inbound->n_datapakid
              IMPORTING
                monitor        = _lt_msg_s
              CHANGING
                RESULT_PACKAGE = <_yt_TG_1>.
            IF ltmsg_s[] IS NOT INITIAL.
    Since you are using your own CATCH Statement in end_routine, may be the exception is not being forwarded to the exception handling in the generated transformation program.
    You can try removing the TRY, ENDTRY and the CATCH statement just leaving the RAISE EXCEPTION TYPE CX_RSROUT_SKIP_RECORD. Ignoring ht warning it displays and then see if the error stack gets populated.
    Hope it helps!
    Check

  • Error Stack and Error DTP-Doubts.

    Hi Experts,
    I have a doubt on Error Stacks and Error DTP's in BI 7.0.
    For example i am doing a load that has 100 records and 10 of these records have some invalid characters and hence are showing up in the Error Stack.Now I know that i can change these records directly in the Error Stack and then use the Error DTP to process these 10 records.
    But for the remaining 90 records the Error Handling in the Update tab is set to "No Update,No reporting" and hence the original request is red.How do I update these remaining 90 records?Is the only way to set Error Handling to "Valid Records Update,Reporting Possible(Request Green)" so that these error free 90 records are loaded and available for reporting?
    Also what is the advantage of using of the Icon "Manually Post-Process Error Records" that exists in the DTP Monitor window against using Error DTP's?
    Thanks
    Aravind

    Hi...
    If it failed due to issues like Invalid char or error records, you may have the error data alone loaded to Error stack which you can edit and reload using an error DTP.
    Else in case if your entire DTP failed, then you need to retrigger the DTP.
    Handling of Data Records with Errors
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/fbd598481e1a61e10000000a422035/content.htm
    Error Stack
    http://help.sap.com/saphelp_nw70/helpdata/EN/42/fa1acfcf2c1aa2e10000000a422035/content.htm
    Thanks
    Assign points if this helps

  • Cant get error stack

    Hi all.
    I am getting an error when running my struts application. That's something like this:
    Validation Error
    You must correct the following error(s) before proceeding:
    JBO-29000: Unexpected exception caught: java.lang.ArrayIndexOutOfBoundsException, msg=0
    0
    ...And no more about the place where it's occurring.
    Can I somehow get the error stack to find the reason of this error?
    Any help would be appreciated.
    Yuriy.

    Hi Sarah
    Thanks for your reply.  My systme is actually on support package 7!!
    The only short dumps I have been getting are Message Type X but these dont occur all the time.  As described above I cannot drill down to the errors on the detail tab in the Monitor as you would in 3 becuase it has one red error with "Status 'Processed with Errors' without long text error message.  I deleted and rebuilt the transformation and DTP and it has just run through, turned green instead of red but not updated texts to the InfoObject.
    I am getting the impression from looking at SAP Notes 955995 and 955590 that support package 9 is required OR from your message support package 8 plus all the further notes listed on 959901 ??
    Many thanks

  • Can't see webdynpro error stack while deployinng from NWDS

    Hi Experts ,
    I am trying top deploy a webdynpro application but it seems there is some error.
    But the URL of my application does not show the detail Error stack.
    It only says
    Failed to deploy the application , please contat your system administrator.
    I remember that it used to show the error stack earlier.
    Can you please tell me how to enable that Error stack?
    Regards,
    Ashish Shah

    In the monitor for the data transfer process, you can navigate to the PSA maintenance by choosing Error Stack in the toolbar, and display and edit erroneous records in the error stack.
    With an error DTP, you can update the data records to the target manually or by means of a process chain. Once the data records have been successfully updated, they are deleted from the error stack. If there are any erroneous data records, they are written to the error stack again in a new error DTP request.
    When a DTP request is deleted, the corresponding data records are also deleted from the error stack.

  • Code for sending records to error stack

    Hi All,
    Requirement: Record satisfying the condition should be sent to error stack and rest should be proceeded further.
    Following is the code written by me to send data to error stack.
    Data gets appended to Monitor but it is not reaching the error stack.
    IF <SOURCE_FIELDS>-FINISHDATE LT wa_cal-VJAHR OR
        <SOURCE_FIELDS>-FINISHDATE GT wa_cal-BJAHR.
          monitor_rec-msgid = 'ZBW'.
          monitor_rec-msgty = 'E'.
          monitor_rec-recno = <SOURCE_FIELDS>-FINISHDATE.
          monitor_rec-skipped = 'X'.
          Append monitor_rec TO MONITOR.
          DELETE TABLE SOURCE_PACKAGE FROM <SOURCE_FIELDS>.
    ENDIF.
    Can you please tell me if the above procedure is fine or needs to be changed?

    Hi Ramesh,
    To me it seems that the code you have written is incorrect. In the 5th line of code you have written:
    monitor_rec-recno = <SOURCE_FIELDS>-FINISHDATE.
    Here you should remember that RECNO & FINISHDATE are of different data types, so may be you can try changing this line of your code to : monitor_rec-recno = <SOURCE_FIELDS>-Record
    U can try this & let me know its working or not, coz i think rest of the code is pretty fine,
    Hope it helps.
    Ragerds,
    Raj

  • Error while comitting a transaction in oSB. The following is the error stack

    Error while comitting a transaction in OSB. The following is the error stack
    <Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
            java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
            java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
            at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
            at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
            at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
            at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
            at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
            at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
            at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
            at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
            at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
            at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
            at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
            at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • SAP ECC error:'Migration Monitor' exits with error code 103.

    Hi All,
    I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
    I am stuck at the import ABAP.Getting error
    ERROR 2008-08-08 16:10:53
    CJS-30022  Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
    1) imort_monitor.java.log-->contains
    java version "1.4.2_12"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
    Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
    Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
    Loading of 'SAPVIEW' import package: ERROR
    Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
    2)import_monitor.log
    ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
    Loading of 'SAPVIEW' import package is interrupted with R3load error.
    Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
    For mode details see 'SAPVIEW.log' file.
    Standard error output:
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    INFO: 2008-08-08 16:10:52
    All import packages are processed.
    WARNING: 2008-08-08 16:10:52
    1 error(s) during processing of packages.
    INFO: 2008-08-08 16:10:52
    Import Monitor is stopped.
    3)SAPVIEW.log
      error message returned by DbSl:
    (IMP) INFO: a failed DROP attempt is not necessarily a problem
    (DB) ERROR: DDL statement failed
    (CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001"  ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001",  T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
    DbSlExecute: rc = 103
      (SQL error -942)
      error message returned by DbSl:
    (DB) INFO: disconnected from DB
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
    D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
    Only SAPDB: SAPSID srvice of SAP DB is only up.
    No other services of database are  up.And i am not able to up the other services also.
    Is it required to up the other services?
    If not?
    Why this error is occuring?
    Any help will be appreciated.
    Thanks&Regards
    Manisha das

    Hello Manisha,
    The one of the possible reasons for this is due to lack of H/W.
    Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
    If the issue is with H/W, then this should fix the issue.
    Hope it helps,
    Regards,
    Satish.

  • How to delete the error stack in process chain?

    Hi all,
    we just want to do the following:
    - we are loading in FULL daily to our datatarget (data is versionized by 0calday)
    - we want to use the error-stack in order to analyze wrong data
    --> but we now encounter the problem that, if data has once been added to the error stack and has not been handled yet, all data from the next daily load will be sorted out as records with this key do already exist in the error-stack. But that's exactly what we want to avoid.
    with other words: how can we delete the records in the error stack by a report by e.g. using this in a process chain?
    Thanks in advance,
    Best regards,
    bivision
    Edited by: bivision2009 on Jul 6, 2010 12:25 PM

    Dbl click that DTP.... From menu... Extras -> Setting for Error Stack
    Here U can see error stack table name /BIC/B0001234000.
    Using SE38, create simple program "Delete from /BIC/B0001234000"
    In the process chain, add process type "ABAP Program" to add above deletion statement.

  • Error while saving changes in RSPC Error Stack.

    Hi gurus,
        I am able to make changes in the error stack in the transaction RSPC, However, when trying to save those changes, I get an error stating that the request "DTPR_* " doesn't exist. and the message is RSAODS005.
    I tried searching in SDN as well in SAP notes, but in vain. Does anybody have any idea how to solve this error.
    Regards,
    Sree.

    Hi Sree,
    delete Error DTP in process Chain, do modifications for Error DTP in RSA1 and add that again in process Chain and activate Process Chain.
    Regards
    Daya Sagar

  • What does this actually mean and how do I fix it: Alert: Error Count Monitor Resolution state Object Hyper-V Virtual Storage Device Has a value

    We are getting this alert on a fair few of our VMs with VHDXs and Dynamic VHDs. Everything seems OK but I am not sure what this actually means and what I need to do to resolve the issue. How do I reset the error count if that is what is required? Thanks
    in advance.
    Alert: Error Count Monitor Resolution state: New
     Error Count Monitor Source: MyVm01 Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE Last modified by: System Last modified time: 2/9/2013 2:08:48 PM Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual
    Sat 09/02
    To:Administrator
     09 February 2013 14:09
    Alert: Error Count Monitor
    Source: MyVm01
    Path: MyHost.MyDomain.local;MyHost.MyDomain.local;FE71577B-A2E2-45C0-B757-2FBCEC9311DE
    Last modified by: System
    Last modified time: 2/9/2013 2:08:48 PM
    Alert description: Instance c:-clusterstorage-volume1-MyVm01-virtual hard disks-MyVm01-DATA02.vhdx
                Object Hyper-V Virtual Storage Device
                Counter Error Count
                Has a value 9
                At time 2013-02-09T14:08:48.0000000+00:00
    Darren

    But I am getting this alert from SCOM and SCOM has no information about the alert for me to find out what to do - thought that was the point of SCOM to let you know of problems and how to resolve them. :)
    The alert is coming from the Error Count Monitor that is part of the Hyper-V Management Pack Extensions (v 4.0.0.0)
    I have tried looking in the Event Logs on the Host and there doesn't seem to be any storage related errors there. I am trying to establish if this is a false positive, why it is happening and if it is safe to override and ignore.
    There is nothing on the Product Knowledge tab and nothing on the Alert Context other than what I have already mentioned (see below).
    Thanks for responding.
    Time Sampled:
    09/02/2013 14:08:48
    Object Name:
    Hyper-V Virtual Storage Device
    Counter Name:
    Error Count
    Instance Name:
    c:-clusterstorage-volume1-myvm-virtual
    hard disks-MyVM-DATA02.vhdx
    Value:
    9
    Darren

Maybe you are looking for