Error stack size

Hi,
i have build a package framework which in exceptional situations uses an encapsulated raise_application_error method with the
-add to error stack- option. In combination with
-speaking- messages it seems as if i am now running against the error stack size border. What i see is that the primarily generated errors are lost.
Is it possible (and recommended) to increase the size and does anyone now how to do this ? (I still have to use 8.1.7)
Thanks in advance,
Bjoern

First of all: you should mention it when you cross-post, to prevent people from wasting their time providing an answer already given in the other site.
https://community.jboss.org/thread/223626
Doing a google for "The stack size specified is too small, Specify at least 160k" gives plenty of reason to believe it is not really a 'problem', but simply a requirement of the JVM; how and why can only be answered by the developers of said JVM, you're not going to find them here because this is a user to user forum. And this isn't any different under Java 7.
So other than downgrading, I don't see how you're going to make any impact. I would do the Google yourself, collect the search results that all indicate that the startup scripts are adjusted to the wishes of the JVM and present that to the vendor to shut them up. Anything more - well good luck getting an official statement from Oracle.

Similar Messages

Size of error stack...

*Hi All,
Is the size of error stack defined?? or can it hold infinite number of error records??*

HI
Please check in error stack settings. There we will get answer for your question.
PATH:
Open any DTP and click on menu path EXTRAS,Settings for error stack
You will get a popo up. In the popup we have option size of error stack
Hope it will helps.
Regards,
SVS

How can I increase the hard limit of the stack size?

Hi,
My process gives an error of segmentation fault (SIGSEGV) that is caused because the stack limit is reached. I have a doubt about how to increase the stack size. I have tried change it with "ulimit - hard" but this size is 65532kb, and is very low for my process. How can I increase the hard limit?
Thanks.

When last I checked, the kernel had a fixed stack size limit.
Do you have the source code to this application? If so, [see this Tiger stack size article|http://homepage.mac.com/eric.c/hpc/contents/documentation/How%20to%20in crease%20the%20stack%20size%20on%20Mac%20OS%20X.pdf], and specifically have a look at the +ld -stack_size+ mechanism; rebuild the code with a bigger limit.
Entirely FWIW, this question would be more typical over in the developer forums or maybe in the Unix forum if you don't have Apple developer access. Better audience for application development and for software-related questions over there.

RangeError: Maximum call stack size exceeded

Dear all,
we are executing and EDGE project in a Samsung SmartTV. In more powerful models (more memory and cpu) the execution is correct. but in some old TV models we receive the following message:
File: file://c/........../EDGE_006/edge_includes/edge.2.0.1.min.js
Line No: 135
Error Detail: RangeError: Maximum call stack size exceeded.
It seems that this happens depending on the complexity of the EDGE project, as for some simple projects it works.
we would like to adjust our EDGE project for this less powerful models modifiying animations and simplifying complexity, but we dont know where to start (which animations to remove, etc.)
Or if there are some parameters in the edge API to adjust in order to increase performance in low memory browsers.
Thank you in advance,
Luis

sunil-online wrote:
> I am calling an external DLL and running it in the UI thread. How much
> stack space is available when they are on separate threads or on the
> UI thread?
>
> The problem is that I am getting seemingly random crashes while
> running this VI and after I quit labview after stopping and uninit-ing
> my DLL.
Unless you know this DLL is using exceedingly lots of stack (at least
several dozens of MB) for whatever obscure reasons it is very unlikely
that running out of stack space is causing your problem. More likely
either the DLL does something nasty to a data pointer passed in to it or
you made an error in setting up the call to the DLL.
For instace if the DLL expects strings or array pointers to be passed in
they need to
be allocated by the caller (here LabVIEW) and you need to
tell LabVIEW to do that in the diagram code.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Call Stack Size

Is there a way to increase the call stack size of LabVIEW or to know
when it has been exceeded?
Thanks.

sunil-online wrote:
> I am calling an external DLL and running it in the UI thread. How much
> stack space is available when they are on separate threads or on the
> UI thread?
>
> The problem is that I am getting seemingly random crashes while
> running this VI and after I quit labview after stopping and uninit-ing
> my DLL.
Unless you know this DLL is using exceedingly lots of stack (at least
several dozens of MB) for whatever obscure reasons it is very unlikely
that running out of stack space is causing your problem. More likely
either the DLL does something nasty to a data pointer passed in to it or
you made an error in setting up the call to the DLL.
For instace if the DLL expects strings or array pointers to be passed in
they need to
be allocated by the caller (here LabVIEW) and you need to
tell LabVIEW to do that in the diagram code.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Difference for method stack size in release and debug builds

Hi,
I have a question regarding the method stack size. Running my project in the debug version works fine. Running the same project as release causes a StackOverflowError (60 entries). Is there any difference in the allowed stack size?
If I split the method (in which the error occurs) into two separate methods and call them sequentially, this works in the release build as well.
I am using Flex SDK 3.4. This is reproducable on Win and Mac.
Cheers
Philipp

Hi,
I have a question regarding the method stack size. Running my project in the debug version works fine. Running the same project as release causes a StackOverflowError (60 entries). Is there any difference in the allowed stack size?
If I split the method (in which the error occurs) into two separate methods and call them sequentially, this works in the release build as well.
I am using Flex SDK 3.4. This is reproducable on Win and Mac.
Cheers
Philipp

BUG: Unable to increase stack size in OJVM

Hi,
I have a complex ADF Faces page (jspx) that has reached the level of complexity that I can reliably cause the JVM to die when running the page with:
Fatal error: Cannot find class java/lang/StackOverflowError
Process exited with exit code -1.when running within JDeveloper. I have tried adding
-Xms1024m -Xmx1024m(yes, I know an outrageous stack size) to the project run properties, and it still crashes. However, if I change to the server JVM instead of ojvm, it works fine, even with a much smaller stack, although the default stack size will crash as well.
So,
1). Shouldn't -Xms and -Xmx work for OJVM? If not, this is going to be a pain when I need to debug, as OJVM rocks for that.
2). Is there some way to configure ADF/OC4J so that I won't bomb like this? I'm guessing that the XML document (JSPX) is big enough that it's causing the XML parser to blow up. Just a guess however.
Thanks,
John

It's unclear if the problems discussed happen after OJC compiles, or Javac compiles, or both. We have uncovered a bug in the compilation of jspx files using OJC. There is a chance that this bug fix will fix the problems mentioned. Email me at keimpe.bronkhorst AT oracle.com if you want to try out a patched OJC. This is not an OJVM fix, so if you compile with Javac, I can't help you at this time.
Keimpe Bronkhorst
JDev team

JVM 1.4 default stack size

Hi,
I would like to know what is the default stack size of JVM of jdk 1.4.
Is there any command which i can use to find the current stack size set up?
Is the heap size & stack size same?
Actually i'm getting a java.lang.StackOverflowError when i execute a class ProgramCallDocument which is present in the jt400.jar provided by IBM in thier Websphere Application Studio Server suite.
The class is working fine with jdk 1.3. But it is giving an error in jdk 1.4
Do any one have any clue about this? Please Help.
Thanks,
Jac.

Thanks for the reply...
Actaully I was looking for how to know the current stack size set for JVM. I assume that using -Xss command will increase the stack size, but before doing so I need to take the current stack size.
Please let me know if you know the command for getting the current stack size set for JVM.
Thanks,
Jacob.

Desired stack size of 8197 Kb exceeds current process limit of 8192 Kb.

I've installed HP's JDK on my hp box:
HP-UX HPUX B.11.23 U ia64
However, I noticed that when I got some error just type "javac":
# java -version
java version "1.5.0.06"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0.06-_12_jan_2007_03_27)
Java HotSpot(TM) Server VM (build 1.5.0.06 jinteg:01.12.07-08:49 IA64, mixed mode)
# javac
Java HotSpot(TM) Server VM warning: Desired stack size of 8197 Kb exceeds current process limit of 8192 Kb.
Well, I could compile and execute java programs on this box, but I'm curious to know the cause for the error message.
Thanks,
Tuan

What is your ulimit set to ?
e.g.
$ ulimit -a
stack(kbytes) 8192
Check your kernel limit with :
e.g.
# kctune | grep maxssiz
maxssize 8388608
maxssize_64 268435456
So you could boost it by changing the maxssize kernel parameter.
Hope this helps,
Lee

Max-stack-size - default_stksize

Hi,
First, sorry for my english ^^
I'm new on Solaris. I installed Solaris 10 on Sun V490 . I use Core Network.
Why with the default setting, daemons or process of the OS "don't work" like this:
Jun 17 14:50:10 unknown genunix: [ID 883052 kern.notice] basic rctl process.max-stack-size (value 8683520) exceeded by process 353In this example I generate the error with the format command. But I get this error with other command or deamon like nscd.
I had the same problem with the value max-file-descriptor. The values set by projmod for the system project did not seem take effect. Thus I used the "old" parameters rlim_fd_cur, rlim_fd_max. Now it's ok.
I find this parameter default_stksize in the Sun documentation. I put this in my /etc/system file:
set default_stksize=16384At the boot time I have no error message for the value, but the max-stack-size value is the same:
prctl -n process.max-stack-size 130
process: 130: /usr/sbin/nscd
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
process.max-stack-size
basic 8,28MB - deny 130
privileged 127MB - deny -
system 2,00GB max deny -
nscd is in the system project:
ps -p 130 -o project
PROJECT
system
Thank in advance, any idea is welcome.
Guillaume

Hi Prasad,
Block Size is the number of parallel processes that are being executed in background during the application. This is normally a configuration activity to be configured in line with basis.
In Block size, we enter the number of objects to be processed per block by the CIF comparison/reconciliation during data selection in SAP APO or in the partner system.
If you increase the block size, the memory required also increases. This has a positive effect on performance. If processes are cancelled due to lack of memory, you can decrease the block size to save memory.
If you do not enter anything here, the system determines the block size dynamically from the number of objects that actually exist and the maximum number of work processes available.
Normally, when you execute a job in background, it picks up the application server automatically or by manually defined server. In parallel processing, at a time, one or more job of the same identify can be triggered under this scenario by defining application servers. But too many parallel processing activity will affect the performance.
One needs to define the parallel processes also to control system behaviour. The Parallel processing profile is defined for parallel processing of background jobs. You then assign these profiles to variants in the applications.
Regards
R. Senthil Mareeswaran.

-Xss: Stack size too large

There is a requirement of high stack size in the application but when I try to set the stack size > 128m , I get the below error
[ERROR] Argument error: -Xss130m
[ERROR] -Xss: Stack size too large
Could not create the Java virtual machine.
Is there a upper limit of 128m on stack size. The Jrockit version is 64 bit.
Please help

Hi,
Are you running OS in 32 bit or 64 bit.
eg:
O/S 32-bit Default 64-bit Default
Windows 64 kB 320 kB
Linux 128 kB 1 mB
Please check your stack size you mentioned it is 128m please change to KB it will work.
Regards,
Kal

Help! VerifyError: stack size too large??

I seem to have a class file with which the class file verifier has a complaint:
D:\test\out>java Probe
Exception in thread "main" java.lang.VerifyError: (class: Probe, method: main signature: ([Ljava/lang/String;)V) Stack size too large
Can anybody point me towards documentation about what the algorithm is or should be to calculate the correct stack size. Or documentation on the message?
I assume the meaning of the message is that the operand stack size is larger than used by the code for the static method main. However, I haven't a clue as to the algorithm I should verify the size against.
Thanks for any help suggestions

Thanks for the suggestion. I am running a modified Class file and have read the jvm spec. I was hoping somebody would have a suggestion as to what the error message actually means...
For example does this mean that the declared size of the operand stack is greater than that required by the code? Or perhaps that the declared size is too large for the code?
The actual method is quite small (on the order of 500 instructions).
I know that the jvm has a requirment that the operand stack have the same size along all control paths (loops, gotos, etc) to a specific instruction. I don't know what error the verifyer would give if this was the problem.
Is there any documentation anywhere the verifier's error messages?
Thanks for any help you can give.

[svn] 1990: Reducing Base64Encoder buffer size from 64K to 32K to help with the smaller stack size of the AVM on Mac .

Revision: 1990
Author: [email protected]
Date: 2008-06-06 18:53:36 -0700 (Fri, 06 Jun 2008)
Log Message:
Reducing Base64Encoder buffer size from 64K to 32K to help with the smaller stack size of the AVM on Mac.
QE: Yes, please test mx.utils.Base64Encoder with Strings and ByteArrays larger than 64K on PC and Mac after these changes.
Doc: No
Checkintests: Pass
Bugs:
SDK-15232 - mx.utils.Base64Encoder.encodeBytes "toString()" or "flush" produces 1511 error on MAC
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15232
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/utils/Base64Encoder.as

You can go with these options :
http://musewidgets.com/collections/all/products/responsive-image
http://musewidgets.com/collections/all/products/responsive-images
Thanks,
Sanjit

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
        java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
        java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Error Stack in Expert Routine, Infos about Object Log

Hi all,
currently I try to find some information about using the error stack in combination with an expert routine. So far I know that I have to use the Object Log, which is already in place in my code for monitor messages.
LOOP AT itab_input INTO wa_input.
IF sy-subrc <> 0.
        CLEAR msg.
        msg-msgid = 'MY_CLASS'.
        msg-msgty = 'E'.
        msg-msgno = '002'.
        msg-msgv1 = v1.
        msg-msgv2 = v2.
        msg-msgv3 = v3.
        APPEND msg TO t_msg.
        " ??? Write wa_input to error stack???
        CONTINUE.
      ENDIF.
ENDLOOP.
Does somebody know how I could append wa_input to the error stack? Or does somebody have a good documentation about Object log?
Thanks a lot!
Nita

Good Morning,
thanks a lot for your input. I tried to implement this function, but I do not know where I could get the Segment Id from.
Do you know what i_use_crosstab is used for? I think i_with_message should be set to 'X' if I want to write wa_input-record it to the error stack.
CALL METHOD log->verify_record
          EXPORTING
            i_use_crosstab = ''
            i_segid         = lv_segid
            i_record        = wa_input-record
            i_with_message = 'X'
          RECEIVING
            r_skip          = lv_skip
          EXCEPTIONS
            too_many_errors = 1
            not_in_crosstab = 2
            OTHERS          = 3.
From semantic point of view the coding should do following:
- To avoid a second loop in my expert routine it should only check the current src record. If this is wrong, which I already determine in my coding, it should write the record in the error stack. If it is correct, it should check whether there are already records with the same semantic key in the error stack and if yes, add it also to it.
- I assume that I have to delete this record manually from my src. package than.
Cheers
Nita

Error stack size

Similar Messages

Maybe you are looking for