Error stag in BI7.0
hi experts,
how to enable error stag?
if we find any error in error stag, what are the steps to load data to data target.
your answer will be given points.
regards
Vijay
HI,
Error Stack
Definition
A request-based table (PSA table) into which erroneous data records from a data transfer process are written. The error stack is based on the data source, that is, records from the source are written to the error stack.
Use
At runtime, erroneous data records are written to an error stack if the error handling for the data transfer process is activated. You use the error stack to update the data to the target destination once the error is resolved.
Integration
In the monitor for the data transfer process, you can navigate to the PSA maintenance by choosing Error Stack in the toolbar, and display and edit erroneous records in the error stack.
With an error DTP, you can update the data records to the target manually or by means of a process chain. Once the data records have been successfully updated, they are deleted from the error stack. If there are any erroneous data records, they are written to the error stack again in a new error DTP request.
When a DTP request is deleted, the corresponding data records are also deleted from the error stack.
Tarak
Similar Messages
-
How to handle the error stag(error DTP)
Hi Friends, i got some records in the error stag while loading data from Dayta source to Master data target and this is in the production. we didn't created the Error DTP in the production. How to delete the error reocrds from the error stag if we dont want to update it to the target.And the request is showing in yellow due to that iam not able to delete the dtp request from the target.
any help...to proceed with this error.
thanks in advance.HI
You are not able to delete the DTP from target?
Change the request to RED
Double clicking on theTrafic signal... then manually change the request to RED and Then you will be able to delete it.
Hope this help...
Dev -
hI,
What is error stag in BI 7
Today unfortunatly I had checked option error stag when some data is posted, but unfortunatly I was not able findout the option to disable to see error data,
The activation button has chaged to green with 0 records..
Pls clarify my above prblm, if possible pls give some steps..
Points would be assigned..
Cheers
MohhanCheck following links.
authorization information
/thread/1232913 [original link is broken]
Authorizations missing for aggregation (":") -
someone please help me,
if I make use of the component to load the player SWFloader contained in his library OSMF there are some errors, it comes out
SecurityError: Error # 2070: Security sandbox violation: caller http://www.mydomain.com/main.swf can not access Stage owned by the app: / main.swf.
at flash.display:: Stage / requireOwnerPermissions ()
at flash.display:: Stage / addEventListener ()
at VideoSurfaceManager / registerStage ()
at VideoSurfaceManager / onAddedToStage ()
at flash.display:: DisplayObjectContainer / addChildAt ()
at org.osmf.containers:: MediaContainer / onAddChildAt ()
at flash.events:: EventDispatcher / dispatchEventFunction ()
at flash.events:: EventDispatcher / dispatchEvent ()
at org.osmf.layout:: LayoutRendererBase / addToStage ()
at org.osmf.layout:: LayoutRendererBase / prepareTargets ()
at org.osmf.layout:: LayoutRendererBase / measure ()
at org.osmf.layout:: LayoutRendererBase / validateNow ()
at org.osmf.layout:: LayoutRendererBase $ / onExitFrame ()
in which parts can be edited in order to avoid errora change default value in OSMFSettings.as
public static var enableStageVideo:Boolean = true;
to
public static var enableStageVideo:Boolean = false;
and this worked.
What do these changes affect the other,
and whether in the recommended or not -
Caller 09 contains error message in BI7
Hello Guru's,
We have a custom data source in r/3(full load) and we loaded full load last nigth to DSO and it is sucessfull.
Custom datasource is changed in r/3 today . so we replicated the datasource , activated Transformation , DSO , DTP, Deleted last nigth loaded request and try to load the data to PSA and we are getting following error message .
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
As it is common error we face in BI Implementation .
we followed these steps .
1) RFC Connection is checked and it is fine .
2) ST22 is checked and we couldn't see any error in R/3 side .
3) sm58 is checked and we couldn't see any IDOC'S in R/3 side .
4)Checked Extract checker RSA3 . we could see 10 records for that data source.
5) We thought it is Time stamp issue and we ran Program RS_TRANSTRU_ACTIVATE_ALL and activate the transfer rules and try to reload.( Not Sucessfull )
6) As above step doesn't make sence as we don't have Transfer rules for 7x datasource . we ran RSDS_DATASOURCE_ACTIVATE_ALL program and activated datasource and try to load the data and we have same issue.
7)we are checked Background user Aleremote . It is not locked.
8)BI side we relplicated datasource , activated , created a new infopackage and try to load the data . still we have same issue.
finally we thought it to be issue is not on Bi side and is on R/3 side .
Please let us know how to solve this issue .
Thanks,
PK.Hi PokerKing:
You're getting the error because the structure of the data loaded yesterday is different from the structure of the data loaded today.
Delete the data both on PSA and on the DSO an reload.
Regards,
Francisco Milán. -
Looking for a functionality which we have in 3.x infopackage level.In infopackage of 3.x we have the concept of error handling by going to update tab and we will give the error handling wherein we have the option of giving few records and selecting 'valid reccords update ,reporting possible(request green)'.
How do we do this in BI 7.0 in a DTP ..
Thanks in advance.Hi Kumar,
You can find the details in SAP Help:
On the Update tab page in the data transfer process (DTP), the error handling settings allow you to control how the system responds if errors occur in the data records when data is transferred from a DTP source to a DTP target.
These settings were previously made in the InfoPackage. When using data transfer processes, InfoPackages only write to the PSA. Therefore, error handling settings are no longer made in the InfoPackage but in the data transfer process.
Settings for Error Handling
For a data transfer process (DTP), you can specify how you want the system to respond when data records contain errors. If you activate error handling, the records with errors are written to a request-based database table (PSA table). This is the error stack. You can use a special data transfer process, the error DTP, to update the records to the target.
Temporary storage is available after each processing step of the DTP request. This allows you to determine the processing step in which the error occurred.
"Repairing" with Error DTP
You create an error DTP for an active data transfer process on the Update tab page. You run it directly in the background or include it in a process chain so that you can schedule it regularly in the context of your process chain. The error DTP uses the full update mode to extract data from the error stack (in this case, the source of the DTP) and transfer it to the target that you have already defined in the data transfer process.
For more, please have a look at this Link: [BI 7Handling of Data Records with Errors|http://help.sap.com/saphelp_nw04s/helpdata/en/42/fbd598481e1a61e10000000a422035/frameset.htm]
Cheers,
Habeeb -
I'm using Oracle Linux 6u6. While I'm installing openstack ( 2 node set up) using packstack, I'm getting this error:
Applying 10.245.33.37_cinder.pp
10.245.33.37_keystone.pp: [ ERROR ]
Applying Puppet manifests [ ERROR ]
ERROR : Error appeared during Puppet run: 10.245.33.37_keystone.pp
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
You will find full trace in log /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Please check log file /var/tmp/packstack/20150327-100335-ltC8Ic/openstack-setup.log for more information
Additional information:
* A new answerfile was created in: /root/packstack-answers-20150327-100336.txt
* Time synchronization installation was skipped. Please note that unsynchronized time on server instances might be problem for some OpenStack components.
* Did not create a cinder volume group, one already existed
* File /root/keystonerc_admin has been created on OpenStack client host 10.245.33.37. To use the command line tools you need to source the file.
* To access the OpenStack Dashboard browse to http://10.245.33.37/dashboard .
Please, find your login credentials stored in the keystonerc_admin in your home directory.
Packages:
[root@slcai461 ~]# rpm -qa|grep keystone
python-keystoneclient-0.9.0-5.el6.noarch
python-keystone-2014.1.3-2.el6.noarch
openstack-keystone-2014.1.3-2.el6.noarch
[root@slcai461 ~]# rpm -qa|grep packstack
openstack-packstack-puppet-2014.1.1-0.12.dev1068.0.4.el6.noarch
openstack-packstack-2014.1.1-0.12.dev1068.0.4.el6.noarch
Log :
[root@slcai461 ~]# cat /var/tmp/packstack/20150327-100335-ltC8Ic/manifests/10.245.33.37_keystone.pp.log
Warning: Config file /etc/puppet/hiera.yaml not found, using Hiera defaults
Warning: Scope(Class[Keystone]): The sql_connection parameter is deprecated, use database_connection instead.
Warning: Scope(Class[Keystone]): token_format parameter is deprecated. Use token_provider instead.
Warning: Scope(Class[Keystone::Endpoint]): The public_address parameter is deprecated, use public_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The internal_address parameter is deprecated, use internal_url instead.
Warning: Scope(Class[Keystone::Endpoint]): The admin_address parameter is deprecated, use admin_url instead.
Warning: Scope(Class[Nova::Keystone::Auth]): The cinder parameter is deprecated and has no effect.
Notice: Compiled catalog for slcai461.us.oracle.com in environment production in 1.60 seconds
Warning: The package type's allow_virtual parameter will be changing its default value from false to true in a future release. If you do not want to allow virtual packages, please explicitly set allow_virtual to false.
(at /usr/lib/ruby/site_ruby/1.8/puppet/type.rb:816:in `set_default')
Notice: /Stage[main]/Keystone/Keystone_config[DEFAULT/admin_token]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone/Keystone_config[database/connection]/value: value changed '[old secret redacted]' to '[new secret redacted]'
Notice: /Stage[main]/Keystone::Db::Sync/Exec[keystone-manage db_sync]: Triggered 'refresh' from 3 events
Notice: /Stage[main]/Keystone/Exec[keystone-manage pki_setup]: Triggered 'refresh' from 2 events
Error: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Wrapped exception:
Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Error: /Stage[main]/Keystone::Service/Service[keystone]/ensure: change from stopped to running failed: Could not start Service[keystone]: Execution of '/sbin/service openstack-keystone start' returned 1: Starting keystone: [FAILED]
Notice: /Stage[main]/Keystone::Service/Service[keystone]: Triggered 'refresh' from 5 events
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_service[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_tenant[services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user[neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_role[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_user_role[glance@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_service[keystone]: Skipping because of failed dependencies
Error: Could not prefetch keystone_endpoint provider 'keystone': Execution of '/usr/bin/keystone --os-endpoint http://127.0.0.1:35357/v2.0/ endpoint-list' returned 1: An unexpected error prevented the server from fulfilling your request. (HTTP 500)
Notice: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Endpoint/Keystone_endpoint[RegionOne/keystone]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_service[cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_service[cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Main/Keystone_endpoint[RegionOne/cinder_v2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/novav3]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_service[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_service[glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Glance::Keystone::Auth/Keystone_endpoint[RegionOne/glance]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_user_role[nova@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user[admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Keystone::Roles::Admin/Keystone_user_role[admin@admin]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user[cinder]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova_ec2]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_endpoint[RegionOne/cinderv2]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_service[nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Nova::Keystone::Auth/Keystone_endpoint[RegionOne/nova]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_user_role[neutron@services]: Skipping because of failed dependencies
Notice: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Neutron::Keystone::Auth/Keystone_endpoint[RegionOne/neutron]: Skipping because of failed dependencies
Notice: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Dependency Service[keystone] has failures: true
Warning: /Stage[main]/Cinder::Keystone::Auth/Keystone_user_role[cinder@services]: Skipping because of failed dependencies
Notice: Finished catalog run in 3.10 seconds
Please let me know how to fix this.This problem connected with proxy-setings.
As the first steps you should try:
1. export system env variable:
http_proxy=http://www-proxy.ru.oracle.com:80
https_proxy=https://www-proxy.ru.oracle.com:80
no_proxy=127.0.0.1,localhost
and you can also export
export OS_TENANT_NAME=admin
export OS_USERNAME=admin
export OS_PASSWORD=root
export OS_AUTH_URL=http://<conntroller_IP>:5000/v2.0/
2. and than restart mysqld, if it is running, stop iptables and repeat installation process from beginning with the currently generated answer file
if we are exporting variable OS_PASSWORD, its value should be the same as value for CONFIG_KEYSTONE_ADMIN_PW in the currently generated answer file.
This OS_PASSWORD will be written by packstack in the /root/keystonerc_admin file and will be used as admin's password for login to Openstack dashboard. -
Hi
I am installing solution manager 4.0 on windows 2003 with oracle 10g.
I am getting the error stage "RUN ABAP REPORT".
The error massage is
ERROR 2006-12-01 08:07:26
FRF-00007 Unable to open RFC connection.
ERROR 2006-12-01 08:07:26
MUT-03025 Caught ERfcExcept in Modulecall: Password logon no longer possible - too many failed attempts.
ERROR 2006-12-01 08:07:26
FCO-00011 The step runRSWBOINS with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|runRSWBOINS was executed with status ERROR .
INFO 2006-12-01 08:19:58
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|1|0|runRSWBOINS".
I can log on to the system though SAPGUI every thinh fine.
What is the solution for that.Pls help me.
RoshanthaHi I am getting another error at the stage 33 "Create java users"
ERROR 2006-12-01 11:37:13
CJS-30196 User not authorized. Session terminated
ERROR 2006-12-01 11:37:13
FCO-00011 The step createJ2EEAdmin with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJ2EEAdmin was executed with status ERROR
Pls give me the solution for that.
I manage to resolve previous issue.
Roshantha -
Printer is at error state W 8.0
Oh my god, i recalled what happened, i was unable to post in the previous post so there was no follow up, made this one today and deleted the contents due to me thinking that the old one was still active. Well, again, the long story.
some xp computers are installed to an hp laserjet 4100, the only that doesnt work is the one with w 8
Had all kind of troubles since that pc arrived.
ill try the short story. printer connected to xxx.xxx.xxx.200
1.- driver from hp (self instaler) wont find a printer in the network. (latest drivers apparently) even if i point to ut. simply wont install.
2.-cpl-->printers-->add network printer---> pl5/pl6/w update drivers (x64 in case you wonter) say that there is no communication with the printer. It wont install
3.-connect to \\xxx.xxx.xxx.200\shared printer (previous driver update in sharing center to the x64 needed) No communication.
4.-cpl-->printer-->add new LOCAL?!!! printer---> use protocol LPTx. After the wizard finished. CMD as Admin--> net use lptx: \\printerpath\printername /persistent:yes --->Bingo, at least at the beggining.
Then, few days later, when we tried to print an excel sheet, at least just part of it ("print selected area" in pre-print menu). It printed an error message (dont remember which, but the error was that i had to update drivers). Since i had the "latest drivers" installer would not install for same reason, but this is where it stopped printing due to the "printer is at error stage" it said.
did not work until i deleted and re did step 4 (lpt2 this time, with net use/delete command before any changes)
so i reinstalled the printer with the "updated driver" which was the same it had anyways, and surprisingly, it worked (for a week or less) then it came back to the same "printer@error@State"
Could not reinstall the printer from here to date. Tried many combinations.
Hp doctor said my printer was fine. (The other printer i have in that pc), the one i want was not detected.
I did update windows/drivers (though still says win 8 instead of 8.1, but it says that there are no updates available.
Have no more ideas about this. 3 things i cannot do. Roll back to a previous windows. Reinstall windows. change the printer.Hi Alien_Invasor,
Thank you! I can see you put a lot of time and effort into your post which is very helpful for those of us who try to help.
Although I would like to be the one to help, I suspect your question would be better answered in the HP Enterprise Business Community, as the HP Laserjet 4100 is a commercial model.
My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
Click here to log into the commercial forum > HP Enterprise Business Community
You may find the HP LaserJet 4100 Printer series supportpage helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
Best of luck.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Error when giving untill condition for System time and date
Hi Experts,
i am using Untill Loop in my workflow to set condition for System time and date.According to this condition when system date and time is greater than equal to some date and time then mail goes to an agent.But during testing , the workflow gets into error stage.
In workflow log i am getting error like
'Maximum number of 10000 nodes reached' in executed action 'DEQUEUE_NEXT_NODE' for false condition.
Please suggest what may be possible cause or solution for it?
Points will be rewarded for any good solution.
Thanks
Snehasish DasHi,
You should not use loop for that kind of purpose. It sounds to me that your workflow is looping all the time, and the maximum numer of nodes is reached soon, and the workflow goes into error.
You should use the WF deadline functionality for your purpose. For example use in a relevant step the "latest end" tab, and define the deadline there. Then when your deadline is reached, the workflow will continue in a separate outcome, and there you can send your mail.
Regards,
Karri -
BDoc Error - Specify Contact Person - BP Relationship.
Hi Experts,
I am having a BDoc with an error msg of "Specify Contact Person". I have checked the extended data of BDoc; it refers to a two BPs id and a Contact Person relationship. I have checked for the relationship between them; it exists.
I am trying to re-process the BDocs but still they remain in the same error stage.
Kindly suggest.
Thanks,
Chaudh.Hi,
I have gone through your query.
I hope the error is "Specify the name of the Contact Person". If the direction of the replication is from CRM to ERP and you have not filled any of the name fields for contact person here in CRM, this error might occur. Because in ERP system the last name field is mandatory.
So you need to fill the Name fields here and check the Bdoc monitor.
Regards,
Venkat -
System is not recorded in the system list
Hi all,
I am using BI 7 system which is connected with a source system of SAP R/3 system and there is no problem in the connectivity between these sytems.
When I tried to save a user defined ztable in BI system it shows an error below and also the description the error message would be. Please go through the following the let me provide the solution.
error: System BI& is not recorded in the system list.
Explaination of the error follows:
System BI7 is not recorded in the system list
Message no: TR638
Diagnosis
The current transport route configuration does not have the system BI7 in this current system list.
The transport route configuration was probably not maintained after the system setup, or was changed incorrectly.
Procedure for system Administration
The system Administration need to change, activate and distribute the transport route configuration accordingly. All systtems in the transport domain must be in the configuration.
Help this to solve.
--regards,
Durai.SHi,
Check in STMS whether your transport route is configured correctly or not. As per error message there is problem in your transport route.
Thanks
Sunny -
APEX - accepting OUT variable values from PL/SQL Stored Procedure
I have created a page (Form) which is accepting values text fields.
In the Page Processing section under Processing, I am passing the values to a PL/SQL Stored Procedure, which acts like an API. The procedure contains code to validate the entered data and finally insert the data into the base tables. The procedure also contains OUT variables in the parameter that would return status of processing and any error messages.
Now, my question is, how can I make the page accept these OUT variables from the procedure. What I wish to do is, to capture these messages/processing status from the procedure in the page. For example, if there is a error in the data and the procedure is sending this message in the OUT variable, I need this to be displayed on the page as an error message.
Is this possible in APEX?
Regards,
Santhosh JoseHi VC,
I just tried putting the string directly instead of the variable. Its still not giving me the expected results.
HOWEVER, I think the reason was because of the EXCEPTION block in my code. I have an EXCEPTION block to handle exceptions. I commented the WHEN OTHERS section and now the error message is coming on the page.
So what I have done now is as follows: At the point at which the error is expected, I am raising a handled exception. And within the exception handling, I am giving RAISE_APPLICATION_ERROR.
WHEN ex_main_error*
THEN*
p_status := 2;*
p_msg := 'ERROR Stage: '||lc_err_stage||' ERROR Message: '||lc_err_msg;*
RAISE_APPLICATION_ERROR (-20001, p_msg);*
This is working now! Which is very good news. Thanks once again for your help!
Regards,
Santhosh Jose -
Edge Animate CC 2014 Update (2014.0.1) live now
Congratulations All!!
The new update for Edge Animate CC 2014(2014.0.1) is now available on Creative Cloud.
The following issues have been addressed :
Resolved compatibility issues with Chrome 36
Fixed crash when publishing static HTML when the composition contains an empty symbol.
Port binding issue as mentioned in the link : http://helpx.adobe.com/edge-animate/kb/found-error-stage-edge-animate.html.
Please refer to the "What's new" @Edge Animate Help | New features summary for more details on this update :
Thanks and Regards,
Sudeshna Sarkaraibun So... it just happened again. This time, I was just moving an image position. Apparently the heavy black shadow around the alert box means Edge Animate keeps generating alert boxes infinitely (screenshot below).
It's really strange. My MacBook is brand new so I couldn't think of any internal causes.
Thanks in advance,
Luna -
Having trouble listening and writing to a socket
I might as well just post my classes. What I really need is a comprehensive guide to reading and writing to a socket. The sockets aren't being printed, and I know it's because they hang on the "readline()" statements in the netcheck functions. Why do they hang?
===================================================================
package TerminalChat;
import java.io.*;
import java.net.*;
public class QOTDServer {
private ServerSocket serversock;
private Socket spawnsock;
public QOTDServer()
// Establishes a new server socket on port 5005
try
serversock = new ServerSocket(5005);
catch (IOException e01)
System.out.println("Error: " + e01);
System.out.println("server socket establishment stage error");
// Untill the program is closed it will always wait untill the "ServerSocket" is accepted.
// Once accepted, it will create a "Socket".
while(true)
try
System.out.println("Before connect");
spawnsock = serversock.accept();
System.out.println("After connect");
new Thread(new ConnectionSpawn(spawnsock)).start();
catch(IOException e02)
System.out.println("Error: " + e02);
System.out.println("socket accept stage error");
public static void main(String[] args)
// TODO Auto-generated method stub
new QOTDServer();
===================================================================
package TerminalChat;
import java.io.*;
import java.net.*;
public class ConnectionSpawn implements Runnable {
Socket connSpawnSocket;
BufferedWriter buffwrite;
BufferedReader buffread;
public ConnectionSpawn(Socket sock)
connSpawnSocket = sock;
public void run()
try
buffread = new BufferedReader(new InputStreamReader(connSpawnSocket.getInputStream()));
buffwrite = new BufferedWriter(new OutputStreamWriter(connSpawnSocket.getOutputStream()));
catch(IOException e01)
System.out.println("Error: " + e01);
System.out.println("bufferedread/bufferedwrite reference to member stage error");
this.broadcast("hello Client");
System.out.println("Testclient: " + netcheck());
public String netcheck()
String msg = "No messages";
try
msg = buffread.readLine();
System.out.println("post readline check");
catch(IOException e02)
System.out.println("Error: " + e02);
System.out.println("netcheck stage error");
return msg;
public void broadcast(String message)
try
buffwrite.write(message);
catch(IOException e03)
System.out.println("Error: " + e03);
System.out.println("ConnectionSpawn write error stage error will this make it to the terminal?");
===================================================================
package TerminalChat;
import java.net.*;
import java.io.*;
public class Client {
Socket clientSocket;
BufferedWriter buffwrite;
BufferedReader buffread;
public Client()
try
clientSocket = new Socket("127.0.0.1", 5005);
catch(Exception e01){}
try
buffread = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
buffwrite = new BufferedWriter(new OutputStreamWriter(clientSocket.getOutputStream()));
catch (Exception e02)
System.out.println("Error: " + e02);
System.out.println("bufferedread/bufferedwrite reference to member stage error");
this.broadcast("Hello Server");
System.out.println("Testclient: " + netcheck());
public String netcheck()
String msg = "No messages";
try
msg = buffread.readLine();
System.out.println("post readline check");
catch(IOException e02)
System.out.println("Error: " + e02);
System.out.println("netcheck stage error");
return msg;
public void broadcast(String message)
try
buffwrite.write(message);
catch(IOException e03)
System.out.println("Error: " + e03);
System.out.println("broadcast check error");
public static void main(String[] args)
// TODO Auto-generated method stub
new Client();
}Oh yea, I just forgot to flush :)
Everything's fine now - works great. BTW, do you guys
reccomend keeping a socket, or just creating a new
one every time you want to send information?Now why would you want to create a new Socket everytime.From the server once a Sockets bounds to the port you stick by it receive the desired clients.From the client side once a socket establishes a connection with the other host you can keep that socket alive till you carry out the task that you want to and then once you are through close the connection.
Maybe you are looking for
-
Hi all! my Problem ist that i need an image as hyperlink in a toolTip. I created a HyperlinkToolTip Class that extends JToolTip and added a JEditorPane with a addHyperlinkListener: private JEditorPane theEditorPane; theEditorPane.addHyperlinkListener
-
Hi, I am developing a Stocks Application. For my requirements, I have to add a Ticker(Moving Text) in Jlabel. I will get array of values at runtime. I have to show the values in Jlabel. I implemented the code somehow. But I got stuck to get the value
-
1. Is it possible to do a mass payment release? 2. Can documents to be released for payment, be sent to the inbox of more than one user simultaneously?
-
How can I copy my slideshow to a dvd?
How can I copy my slideshow on a dvd?
-
How to install Apex on small business server with IIS already installed?
I am building an Oracle Application Express application for a small not-for-profit and they only have a single small business server that is already running the microsoft IIS server. Can I install the Oracle Http server and run both the Oracle and II