Error starting J2EE after EP installation

Hi,
I'm trying to install EP 6.0 SP9 in WAS 6.40 SP9 on Linux PowerPC. WAS is an standalone instance (only JAVA part).
The installation is aborted in the J2EE Start step (the step before the latest step). After that I cannot start J2EE Engine anymore, because the process jlaunch dies suddently, and on logs this error is shown:
ERROR => JHVM_LoadJavaVM: Cannot create Java VM (rc=-6) [jhvmxx_mt.c 480]
ERROR => Cannot load Java VM (<default>) (rc=-1) [jlnchxxi_mt 591]
SigISetIgnoreAction: SIG_IGN for signal 17
JLaunchCloseProgram: good bye (exitcode=-1)
What should I do?
Thanks in advance,
Arnau

Hi Arnau,
I would suggest to check the Java VM parameters. You can look for a section "Adapt Memory Configuration for the J2EE Server" in the installation guide or the SAP notes mentioned in the guide dealing with the Java VM parameters (like 723909 and 716927).
This thread might also be of help to solve your problem: https://forums.sdn.sap.com/thread.jspa?threadID=66611
Hope this helps,
Robert
PS: Please consider following the <a href="https://forums.sdn.sap.com/thread.jspa?threadID=117168&tstart=0">Rules of Engagement</a> as mention by Craig Cmehil. It's polite to come back to your <a href="https://forums.sdn.sap.com/thread.jspa?threadID=129275">own threads</a> and mark the thread as solved or assign points and give feedback to the answers so that other readers can learn how to solve the issue that you have experienced. Thanks a lot!

Similar Messages

Errors starting JBoss after installing OIM

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me how to resolve.
increasing the memory did not help.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

I am getting these errors starting JBoss after installing OIM 9.1.0.1 on windows 2003 server with JBoss 4.2.3GA canany one please help me why.
19:04:04,468 INFO [WEBSTARTUP] Scheduler started
19:04:04,484 INFO [TomcatDeployer] deploy, ctxPath=/xlWebApp, warUrl=.../tmp/de
ploy/tmp5989105329966275493XellerateFull.ear-contents/xlWebApp-exp.war/
19:05:02,984 ERROR [STDERR] Exception in thread "DefaultQuartzScheduler_QuartzSc
hedulerThread"
19:11:18,359 ERROR [STDERR] Exception in thread "IdleRemover"
19:15:34,562 ERROR [STDERR] Exception in thread "Thread-15"

Computer won't start properly after Leopard installation attempt

Yesterday I tried to install Leopard 10.5.6 on my G5 (currently running Tiger 10.4.11) and ran into a ton of problems. First, a message came up preventing me from upgrading without erasing my hard drive. I decided to quit the installer and back up my drive before erasing it, but after trying to start up again on my main disk, the computer will no longer get past the Apple logo screen. It stays that way for several minutes, and the computer revs and revs until it's at max RPM, then the computer just shuts off. I can't access my data to back it up.
I did some internet research and tried started up from the install DVD again (which still works) and tried to repair my disk using Disk Utility. This didn't work and an error message came up: "Attempted to Repair Disk, attempt failed. Invalid Node Structure, Volume Check Failed. Error: The underlying task reported failure on exit."
If anyone has any advice I would be VERY grateful, I am hoping to not have to have the computer repaired as I already have my other Mac out of service as well and the cost of repair has been high. I need to back up some important files before I update to Leopard, is there any way to do this while starting up from the DVD since my Startup disk doesn't work now? What happened??!!!

Is it possible that the piece stuck in the audio jack has resulted in turning off the internal speakers?
I would say that the Leopard installation is not 100%. Sometimes this happens. Or you may have a piece of software installed that mutes the speakers, and it needs to disable that. If it's not the latter, then I would erase the hard drive and reinstall from scratch. If that's not feasible then you can do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Error starting J2EE in console mode

Hi All,
I am trying to start my J2EE in console mode in an attempt to reset my Visual Admin administrator password. But while starting J2EE in console, I encountered the following error.
Loading: ClusterManager ... Nov 19, 2008 3:15:26 AM ...anagerImpl.init(java.uti
l.Properties) [Thread[Thread-1,5,main]] Fatal: Cannot attach to the Message Serv
er. Can't open port [13902] on host [fswsaphrd1/10.192.89.90] (Connection refuse
d: connect).
Can anyone help? Thanks.

yes i have tried
[applmgr@eureka bin]$ /u01/oracle/prodora/iAS/Apache/Apache/bin/httpdsctl startssl
/u01/oracle/prodora/iAS/Apache/Apache/bin/httpdsctl startssl: httpd started
also i went through Doc ID:388205.1
but in the httpd.conf file, following is the entry
<IfModule mod_oprocmgr.c>
#Fix for bug 4004671. Provide pid file name for Oprocmgr.
OpmMtxFile /u01/oracle/prodora/iAS/Apache/Apache/logs/opm_sys_mtx.pid
</IfModule>
instead of
<IfModule mod_oprocmgr.c>
Listen 443
ProcNode abc.xyz.com 443
as per the Doc ID
Also i tried changing the port number to some other free port , that time apache starts n stops in SSL mode.
but cant access via
https://eureka.quest-global:8000/OA_HTML/AppsLocalLogin.jsp
rgds,
Krishnaraj

Error Start j2ee (Solution Manager)

Hi, start instance solution manager but not start j2ee, only run instance abap.
the operation system is windows 32 bits, 8 GB RAM.
Show error in the file log dev_jcontrol:
[Thr 5192] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 8048] JControlDPMessageProxy: Thread 8048 started as handler thread for R/3 dispatcher messages.
[Thr 5192] [Node: bootstrap] java home is set by profile parameter
#Java Home: C:\j2sdk1.4.2_12
[Thr 5192] *** ERROR => JStartupIGetJDKInfo: Cannot find Java compiler [C:\j2sdk1.4.2_12\bin\javac.exe]. [jstartxxi.c 991]
[Thr 5192] *** ERROR => can't get JDK information (rc = -1) [jstartxxi.c 1257]
[Thr 5192] **********************************************************************
ERROR => JDK Detection failed.
Please see SAP Note 943602 , section 'JDK detection issues'
for additional information and trouble shooting.
[Thr 5192] *** ERROR => node [bootstrap] not found [jstartxx.c 1593]
[Thr 5192] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc = -18)
[Thr 5192] JControlCloseProgram: started (exitcode = -18)
[Thr 5192] JControlCloseProgram: good bye... (exitcode = -18)
Best Regards,
EDRS

Hi,
Is the JAVA_HOME set ?
Did you ugrade the JDK from any previous version, if so rename instance.properties.vmprop to instance.properties.vmprop.old (eg) and try to restart the
Regards,
Arjun
Edited by: Arjun Venkateswarlu. on Jan 13, 2012 9:41 AM

Error Starting Database after Installation and reboot

Hi all,
After installing Oracle 10g on Redhat and restarting the system i am getting the following message where i try to start the database:
"SP2-0642:SQL*PLUS internal error state 2165, context 4294967295:0:0
Unable to procced
Database <database name> not started"
the Listener starts ok
any idea or any help?
Kindly

The listener file is created and the listener it is started showing 1 instance.
Actualy this is what i have:
Listener.ora file :
# listener.ora Network Configuration File: /u01/app/oracle/product/10.1.0/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/10.1.0)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Dias)(PORT = 1521))
Listener output after executing "lsnrctl start" :
[oracle@Dias oracle]$ lsnrctl start
LSNRCTL for Linux: Version 10.1.0.2.0 - Production on 22-MAY-2004 11:33:41
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.1.0.2.0 - Production
System parameter file is /u01/app/oracle/product/10.1.0/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.1.0/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dias)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.2.0 - Production
Start Date 22-MAY-2004 11:33:41
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.1.0/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.1.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=dias)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@Dias oracle]$
dbstart output after executing "dbstart" :
[oracle@Dias oracle]$ dbstart
SP2-0642: SQL*Plus internal error state 2165, context 4294967295:0:0
Unable to proceed
Database "alisida" NOT started.
info alisida

Error starting J2EE server

I have recently installed the J2EE SDK 1.3.1 and J2SE SDK 1.4.1_02. Upon starting the j2ee server (j2ee -verbose), get the following error message.
Exception in thread "main" java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:175)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:972)
Caused by: java.lang.NullPointerException
at java.net.InetAddress.cacheAddress(InetAddress.java:648)
at java.net.InetAddress.cacheAddress(InetAddress.java:633)
at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1016)
at java.net.InetAddress.getLocalHost(InetAddress.java:1125)
at com.sun.enterprise.util.Utility.getLocalHost(Utility.java:56)
at com.sun.enterprise.repository.ConfigurationImpl.<clinit>(ConfigurationImpl.java:18)
... 2 more
I am running Linux 7.2, Apache 1.3.27, Tomcat 4.1.24., and have two (2) NICs.
Any ideas on what might cause this issue?

I believe I got the server working. The system may have had an issue recognizing the environmental variables being set in the .bash_profile and the setconfig.sh.
If anyone could clarify the errors above, I would greatly appreciate the information.
J2EE server listen port: 1050
Naming service started:1050
Binding DataSource, name = jdbc/DB1, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/DB2, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/InventoryDB, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/Cloudscape, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/EstoreDB, url = jdbc:cloudscape:rmi:CloudscapeDB;create=true
Binding DataSource, name = jdbc/XACloudscape, url = jdbc/XACloudscape__xa
Binding DataSource, name = jdbc/XACloudscape__xa, dataSource = COM.cloudscape.core.RemoteXaDataSource@1c208b0
Starting JMS service...
Initialization complete - waiting for client requests
Binding: < JMS Destination : jms/Queue , javax.jms.Queue >
Binding: < JMS Destination : jms/Topic , javax.jms.Topic >
Binding: < JMS Cnx Factory : QueueConnectionFactory , Queue , No properties >
Binding: < JMS Cnx Factory : jms/QueueConnectionFactory , Queue , No properties
>
Binding: < JMS Cnx Factory : jms/TopicConnectionFactory , Topic , No properties
>
Binding: < JMS Cnx Factory : TopicConnectionFactory , Topic , No properties >
Starting web service at port: 8000
Starting secure web service at port: 7000
J2EE SDK/1.3.1
Starting web service at port: 9191
J2EE SDK/1.3.1
J2EE server startup complete.

Unexpected Error Occurred (error code -600) after Leopard Installation

Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.

OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation...

SMC 4.0 doesn't show correct start page after the installation

Hello,
after installing SMC 4.0 in a Solaris 10 sparc server it is not possible to get the start page at http://host:6789
I just get in the browser:
usage: head [-n #] [-#] [filename...]
Copyright � 2007 Sun Microsystems, Inc. All rights reserved. U.S. Government Rights - Commercial software. Government users are subject to the Sun Microsystems, Inc. standard license agreement and applicable provisions of the FAR and its supplements. Use is subject to license terms. This distribution may include materials developed by third parties.Portions may be derived from Berkeley BSD systems, licensed from U. of CA. Sun, Sun Microsystems, the Sun logo, Java, Netra, Solaris, Sun Ray and Sun StorEdge are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
more details:
# svcs -a|grep web
disabled        8:30:48 svc:/application/management/webmin:default
disabled        8:30:49 svc:/system/webconsole:console
online          8:31:53 svc:/application/management/sunmcwebserver:default
# cat /etc/release
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
           Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 16 August 2007
root@jumpstart:/ # es-validate
This script will help you in validation of Sun (TM) Management Center.
Validation Tool Version         : 4.0
Host name                       : jumpstart
Number of CPUs                  : 2
Platform                        : SUNW,Sun-Fire-V215
Operating System                : SunOS 5.10
Memory size                     : 6144 Megabytes
Swap space                      : 1154008k used, 8156008k available
JAVA VERSION                    : "1.5.0_12"
Sun Management Center Production Environment Installation.
Following layers are installed : SERVER, AGENT, CONSOLE
Installation location           : /opt/SUNWsymon
Sun Management Center Add-Ons and Versions:
PRODUCT                                         VERSION
Production Environment                          4.0
Advanced System Monitoring                      4.0_Build15
Service Availability Manager                    4.0_Build15
Sun Fire Entry-Level Midrange S                 3.5-v6
Netra                                           3.6
Performance Reporting Manager                   4.0_Build15
Solaris Container Manager                       4.0_Build15
Sun Fire Midrange Systems Domai                 3.5-v6
Dynamic Reconfiguration for Sun                 3.5-v6
Sun Fire Midrange Systems Platf                 3.5-v6
System Reliability Manager                      4.0_Build15
Workgroup Server                                3.6
Generic X86/X64 Config Reader                   4.0_Build15
Sun Management Center Patch installation details:
No Sun Management Center patch is installed.
Sun Management Center disk-space consumption:
PRODUCT                         APPROXIMATE DISK SPACE CONSUMED
Production Environment          : 54452 kB
Advanced System Monitoring      : 2391 kB
Service Availability Manager    : 1838 kB
Sun Fire Entry-Level Midrange S : 1738 kB
Netra                           : 2005 kB
Performance Reporting Manager   : 3371 kB
Solaris Container Manager       : 3688 kB
Sun Fire Midrange Systems Domai : 1718 kB
Dynamic Reconfiguration for Sun : 303 kB
Sun Fire Midrange Systems Platf : 3270 kB
System Reliability Manager      : 970 kB
Workgroup Server                : 3707 kB
Generic X86/X64 Config Reader   : 608 kB
TOTAL                           : 80059 kB
Database is located at          : /var/opt/SUNWsymon/db/data/SunMC
Free space available on this partition is : 2447579 kB
Following locales are installed :
Information about upgrade from old versions is not available.
Sun Management Center Ports:
SUNMC COMPONENT                  PORT_ID
agent service                    4800
trap service                     162
event service                    163
topology service                 164
cfgserver service                165
cstservice service               167
metadata service                 168
platform service                 166
grouping service                 5600
rmi service                      2099
webserver_HTTP service           6789
webserver_HTTPS service          8443
Sun Management Center Server Hosts definitions in domain-config.x:
SUNMC COMPONENT                  SERVER_HOST
agent service                    jumpstart
trap service                     jumpstart
event service                    jumpstart
topology service                 jumpstart
cfgserver service                jumpstart
cstservice service               jumpstart
metadata service                 jumpstart
platform service                 jumpstart
Sun Management Center Processes:
SUNMC SERVICE                    STATUS
Java Server                      Running.
Database services                Running.
Grouping service                 Running.
Event-handler service            Running.
Topology service                 Running.
Trap-handler service             Running.
Configuration service            Running.
CST service                      Not Running.
Metadata Services                Running.
Hardware service                 Not Running.
Web server                       Running.
Sun Management Center Agent      Running.
Platform Agent                   Not Running.
Privilege level for Sun Management Center users :
CATEGORY                         USERS
esadm                           : smcadmin
esdomadm                        : smcadmin
esops                           : None
ALL USERS                       : smcadmin
server is local host
Web server package is installed correctly.
Web Server is up and responding.
Web Server servlet engine is up and responding.
Validation tool Log file is : /tmp/validation_jumpstart.080613084452.17073What is going on here?
Any help is really appreciated.
-- Nick

@sachint
I tried your suggestion, but I still have the same situation. Unfortunately.
I see -
# svcs -vx
# svcs -a|grep web
root@jumpstart:/ # svcs -a|grep web
disabled       Jun_13   svc:/application/management/webmin:default
disabled       18:39:06 svc:/system/webconsole:console
online         18:40:02 svc:/application/management/sunmcwebserver:default
# cat /var/svc/log/application-management-sunmcwebserver:default.log
[ Aug 6 18:39:51 Enabled. ]
[ Aug 6 18:39:51 Executing start method ("/lib/svc/method/es-svc.sh start webserver") ]
Web server started successfully.
[ Aug 6 18:40:02 Method "start" exited with status 0 ]
# svcs -p application/management/sunmcwebserver
STATE          STIME    FMRI
online         18:40:02 svc:/application/management/sunmcwebserver:default
               18:39:53    27621 java
# telnet localhost 6789
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.If I truss the java process, I see something like -
# truss -edalf -rall -vall -wall -o /tmp/jumpstart.out -p 27621
# less /tmp/jumpstart.out
27621/28:        9.9421 write(7, 0xB02FCEA0, 498)                       = 498
27621/28:          2 0 0 8 - 0 8 - 0 6   1 8 : 5 3 : 3 1   H t t p P r o c e s s o
27621/28:          r [ 6 7 8 9 ] [ 3 ]   p r o c e s s . p a r s e\n j a v a . i o
27621/28:          . I O E x c e p t i o n :   C o u l d n ' t   r e a d   l i n e
27621/28:         \n\t a t   o r g . a p a c h e . c a t a l i n a . c o n n e c t
27621/28:          o r . h t t p . S o c k e t I n p u t S t r e a m . r e a d R e
27621/28:          q u e s t L i n e ( S o c k e t I n p u t S t r e a m . j a v a
27621/28:          : 2 3 5 )\n\t a t   o r g . a p a c h e . c a t a l i n a . c o
27621/28:          n n e c t o r . h t t p . H t t p P r o c e s s o r . p a r s e
27621/28:          R e q u e s t ( H t t p P r o c e s s o r . j a v a : 7 1 0 )\n
27621/28:         \t a t   o r g . a p a c h e . c a t a l i n a . c o n n e c t o
27621/28:          r . h t t p . H t t p P r o c e s s o r . p r o c e s s ( H t t
27621/28:          p P r o c e s s o r . j a v a : 9 7 4 )\n\t a t   o r g . a p a
27621/28:          c h e . c a t a l i n a . c o n n e c t o r . h t t p . H t t p
27621/28:          P r o c e s s o r . r u n ( H t t p P r o c e s s o r . j a v a
27621/28:          : 1 1 2 5 )\n\t a t   j a v a . l a n g . T h r e a d . r u n (
27621/28:          T h r e a d . j a v a : 5 9 5 )\n\n
27621/28:        9.9445 send(18, 0xB02FE768, 159, 0)                    = 159
27621/28:          H T T P / 1 . 1   4 0 0   B a d   R e q u e s t\r\n C o n t e n
27621/28:          t - T y p e :   t e x t / h t m l\r\n C o n n e c t i o n :   c
27621/28:          l o s e\r\n D a t e :   W e d ,   0 6   A u g   2 0 0 8   1 6 :
27621/28:          5 3 : 3 1   G M T\r\n S e r v e r :   A p a c h e   T o m c a t
27621/28:          / 4 . 0 . 5   ( H T T P / 1 . 1   C o n n e c t o r )\r\n\r\n
27621/28:        9.9448 ioctl(18, FIONREAD, 0xB02FF34C)
...I have no idea what is happening here.
-- Nick
Edited by: der_niki on Aug 6, 2008 9:56 AM

Error starting SQLPLUS after updating Fedora Core 5

Hi,
I ran "yum update" on fedora core 5 and now sqlplus does not start anymore. I get this error:
sqlplus: error while loading shared libraries: /opt/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libnnz10.so: cannot restore segment prot after reloc: Permission denied
I understand it has something to do with the SELinux policy but how can I configure my system so Oracle still works AND the security policy still works ?
Thanks !!!
Coen

Hello,
This solution ( tail -f /var/log/audit/audit.log |tee oracle.log; audit2allow -M oracle < oracle.log; semodule -i oracle.pp)
worked for me. Can somebody explain what it did (I don't understand from the man pages)? ALso, how did this come to be. This happened to me right after a fresh install, and the machine got bounced.
All answers are apprecaited.
Thanks,
Edited by: user8674025 on Nov 27, 2009 9:59 AM

Error starting j2ee and cleanup

I'm install the following at my Red Hat Linux 7.1 machine:
JDK 1.2.2 -- "jdk-1_2_2_008-linux-i386[1].tar.gz"
Tomcat 3.3a -- "jakarta-tomcat-3.3a.tar.gz"
J2EE -- "j2sdkee-1_3_01-linux[1].tar.gz"
Ant 1.3 -- "jakarta-ant-1.3-bin.tar.gz"
And I had set the following in the /etc/profile file:
JAVA_HOME=/usr/local/jdk
export JAVA_HOME
J2EE_HOME=/usr/local/j2sdkee1.3
export J2EE_HOME
ANT_HOME=/usr/local/jakarta-ant-1.3
export ANT_HOME
CLASSPATH=/usr/local/jdk/lib:/usr/local/jre/lib:/usr/local/j2sdkee1.3/lib:/usr/local/jakarta-ant-1.3/lib
export CLASSPATH
PATH=$PATH:/usr/local/jdk/bin:/usr/local/jre/bin:/usr/local/j2sdkee1.3/bin:/usr/local/jakarta-ant-1.3/bin
If I using "j2ee -verbose" to start the J2EE Server the following will come out:
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context
at com.sun.enterprise.server.J2EEServer.<clinit>(J2EEServer.java:59)
If I execute the cleanup script, the following will message will come out:
Exception in thread "main" java.lang.NoClassDefFoundError: javax/naming/Context
at com.sun.enterprise.util.J2EECleanup.<init>(J2EECleanup.java:31)
at com.sun.enterprise.util.J2EECleanup.main(J2EECleanup.java:45)
Can anybody give me suggestion to solve it?

Did you ever solve it because i get exactly the same errors on a windows NT machine.
Thanks

Error starting J2EE

I have currently installed J2EE 1.3 but have problems starting it...
Whent I type j2ee -verbose in the command prompt I receive the following message:-
Out of environment space
Out of environment space
Syntax error
Syntax error
Syntax error
Exception in thread "main" java.lang.NoClassDefFoundError: cleanup/bat
Please help me...

Your problem is that you need to tweak the J2EE batch files to run on Windows 98 or Windows Me. See http://groups.msn.com/J2EETools for help.

Ora-01017 error starting J2EE: logon refused

I'm usig Web As 640 Abap+Java Sp16.
I was not able to logon anymore to the J2EE, both Visual Admin or vie the J2EE Start Page, so i did the following:
1) i checked in config tool wich was the ume.r3.connection.master.client
2)with SU01 in the Was 640, into the master client i changed the psw for J2EE_ADMIN
3) i logged with J2EE_ADMIN to define a definitive psw into the master client
4) with config tool i selected the 'Secure Store' node, and changed the parameter admin/password/J2EE_ADMIN
5) restarted the J2EE server and......
...it does not come up.
Into the jvm_bootstrap.log we see the msg :
"ORA-01017 invalid username/passoword, logon denied
What's wrong ? About wich user/psw is talking about and how I can modify it as I cannot start the configtool also ?
regards

Hi Cornelia,
You are absolutely right, the issue is due to change of schema user password..
I faced the same issue, yesterday where i changed the password for the schema user and J2ee failed to start, and then locked the user account. So i had to manually unlock the schema user, reset back the password to old password and j2ee engine could then be started..
To check if the schema user is locked or not, you can use the following commands:
sqlplus "/as sysdba"
select username,account_status from dba_users;
in case user is locked then unlock it using the command:
alter user <user_name> account unlock;
But i have a question here, how does one change the password for schema user in 640 and 700 systems.. if i change it using oracle commands, j2ee fails to come up. So i used the procedure that SAP recommends, changing the password for the schema user, using brtools.. but again i face the same problem, j2ee fails to start and it locks the user account..
After changing the password using brtools is there something additional that is required to be done.
In my scenario it is a must for me to change the schema user password because the current password contains the character "@" which is pathetic, because tnsnames really fails to understand this character. If i use sqlplus and try to logon as schema user and current password, it fails becuase of "@".
Appreciate if some one could share the procedure for changing the password for schema user in 700 systems, specially standalone j2ee stack..
Thanks,
Chetan

Error starting J2EE server in debug mode

I am trying to start the Sun 1.4 application server in a debug mode. I get an error
err:FATAL ERROR in native method: No transports initialized
: No such file or directory
Error [2] in bind() call!
Socket transport failed to init.
Transport dt_socket failed to initialize, rc = -1.
The setting in config.xml file is:-
debug-enabled="true" debug-options="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=1044
Any help will be appreciated.
Thanks,
Milind

I changed the port number and it worked. Not sure why port 1044 as specified in the Sun documentation doesnot work.
Milind

Urgent help: ERROR: STARTING J2EE 1.3.1

Here is the message:
Dear Sir or Madam:
There is no way I get it run J2E1.3.1. I need it so desperately.
THE OS is Windows XP Professional.
Message is:
C:\j2sdkee1.3.1\bin> j2ee -verbose
Exception in thread "main" java.lang.NoClassDefFoundError: C:\j2sdkee1/3/1\lib\system\;;C:\j2sdk1/4/0_01\\lib\tools/jar;C:\j2sdkee1/3/1\\lib\jhall/jar
C:\j2sdkee1.3.1\bin>
May I say that the files lib\tools.jar and hall.jar do exist in their directories.
I think the / are the actual .
My autoexec.bat is as follows:
SET SHELL=C:\MYPROG~1\RATIONAL\RATION~1\NUTCROOT\mksnt\sh.exe
SET COMSPEC=C:\WINDOWS\COMMAND.COM
SET windir=C:\WINDOWS
SET winbootdir=C:\WINDOWS
SET TMP=C:\WINDOWS\TEMP
SET
CLASSPATH=C:\j2sdkee1.3.1\bin;C:\j2sdk1.4.0_01\bin;C:\j2sdkee1.3.1\lib\j2ee.jar;C:\j2sdk1.4.0_01\lib\tools.jar;C:\Cloudscape3.6\lib\cloudscape.jar;C:\Cloudscape3.6\lib\tools.jar;C:\Cloudscape3.6\demo\programs\tours;.;C:\j2sdkee1.3.1\;C:\j2sdkee1.3.1\Iib\cloudscape\cloudclient.jar;C:\j2sdkee1.3.1\lib\cloudscape\cloudscape.jar;C:\j2sdkee1.3.1\lib\cloudscape\RmiJdbc.jar
SET PROMPT=$p$g
SET TEMP=C:\WINDOWS\TEMP
SET HOME=C:\MYPROG~1\RATIONAL\RATION~1\NUTCROOT
SET
PATH=C:\J2SDKEE1.3.1\BIN;C:\J2SDK1.4.0_01\BIN;C:\PROGRA~1\COMMON~1\MICROS~1\MSINFO\;C:\MYPRO
G~1\RATIONAL\CLEARQ~1;C:\ORAWIN95\BIN
SET TMPDIR=C:\WINDOWS\TEMP
SET ROOTDIR=C:\MYPROG~1\RATIONAL\RATION~1\NUTCROOT
SET DISPLAY=:0.0
My environment in xp using gui from my computer properties is :
Environment Variables:
User variables for ansar:
Variable: J2EE_HOME
Value: C:\j2sdkee1.3.1\
Variable: JAVA_HOME
Value: C\j2sdk1.4.0_01
Variable: PATH
Value: C:\j2sdk1.4.0_01\bin\
System variables
Variable: CLASSPATH
Value: C:\j2sdkee1.3.1\bin;C:\j2sdk1.4.0_01\bin;C:\j2sdkee1.3.1\lib\j2ee.jar;C:\j2sdk1.4.0_01\lib\tools.jar;C:\Cloudscape3.6\lib\cloudscape.jar;C:\Cloudscape3.6\lib\tools.jar;C:\Cloudscape3.6\demo\programs\tours;.;C:\j2sdkee1.3.1;C:\j2sdkee1.3.1\Iib\cloudscape\client.jar;C:\j2sdkee1.3.1\lib\cloudscape\tools.jar;C:\j2sdkee1.3.1\lib\cloudscape\cloudscape.jar;C:\j2sdkee1.3.1\lib\cloudscape\RmiJdbc.jar;C:\j2sdkee1.3.1\lib\cloudscape\licence.jar
Variable: Path
Value: %SYSTEMROOT%\system32;C:\j2sdkee1.3.1\bin;C:\j2sdk1.4.0_01\bin;C:\PROGRA~1\COMMON~1\MICROS~1\MSINFO\;C:\MYPROG~1\RATIONAL\CLEARQ~1;C:\ORAWIN95\BIN;%SYSTEMROOT%;%SYSTEMROOT%\system32\WBEM
Where system root is C:
Also most of the files in J2EE1.3.1 BIN files hold the following J2EE_HOME AND JAVA_HOME configuration
For instance: This is j2ee.bat file
@echo off
SET JAVA_HOME=C:\j2sdk1.4.0_01\
SET J2EE_HOME=C:\j2sdkee1.3.1\
if not "%J2EE_HOME%" == "" goto CONT0
echo ERROR: Set J2EE_HOME before running this script.
goto END
:CONT0
if EXIST "%J2EE_HOME%\bin\setenv.bat" goto CONT1
echo ERROR: Set J2EE_HOME to the path of a valid j2sdkee.
goto END
:CONT1
call %J2EE_HOME%\bin\setenv.bat
if not "%JAVA_HOME%" == "" goto CONT2
echo ERROR: Set JAVA_HOME before running this script.
goto END
:CONT2
if EXIST "%JAVA_HOME%\bin\java.exe" goto CONT3
echo ERROR: Set JAVA_HOME to the path of a valid jdk.
goto END
:CONT3
rem @echo on
%JAVA_COMMAND% %LISTEN_OPTIONS% -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter -Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl -Djms.home=%JMS_HOME% -Dcom.sun.jms.service.jdbc.dbpath=%JMS_DB_PATH% -Djms.properties=%J2EE_HOME%\config\jms_service.properties -Djava.security.policy==%J2EE_HOME%\lib\security\server.policy -Djava.security.auth.login.config=%J2EE_HOME%\lib\security\serverlogin.config -Dcom.sun.enterprise.home=%J2EE_HOME% -classpath %CPATH% com.sun.enterprise.server.J2EEServer %*
:END
Help me please, because I want to use Sun�s Reference Implementation to do J2EE Development work. Without the server I cannot do anything.

SET SHELL=C:\MYPROG~1\RATIONAL\RATION~1\NUTCROOT\mksnt\sh.exe
SET COMSPEC=C:\WINDOWS\COMMAND.COM
SET windir=C:\WINDOWS
SET winbootdir=C:\WINDOWS
SET TMP=C:\WINDOWS\TEMP
================================
SET PROMPT=$p$g
SET TEMP=C:\WINDOWS\TEMP
SET HOME=C:\MYPROG~1\RATIONAL\RATION~1\NUTCROOT
SET CLASSPATH=C:\j2sdkee1.3.1\bin;C:\j2sdk1.4.0_01\bin;C:\j2sdkee1.3.1\lib\j2ee.jar;C:\j2sdk1.4.0_01\lib\tools.jar;C:\Cloudscape3.6\lib\cloudscape.jar;C:\Cloudscape3.6\lib\tools.jar;C:\Cloudscape3.6\demo\programs\tours;.;C:\j2sdkee1.3.1\;C:\j2sdkee1.3.1\Iib\cloudscape\cloudclient.jar;C:\j2sdkee1.3.1\lib\cloudscape\cloudscape.jar;C:\j2sdkee1.3.1\lib\cloudscape\RmiJdbc.jar
SET PATH=C:\j2sdk1.4.0_01\bin;.;C:\j2sdkee1.3.1\bin
SET TMPDIR=C:\WINDOWS\TEMP
SET ROOTDIR=C:\MYPROG~1\RATIONAL\RATION~1\NUTCROOT
SET DISPLAY=:0.0
===================================
Dear friends
Even though I have this file details in autoexec.bat and under advanced section of my Properties (right click)in my Computer the exact info...the message appears to be the same..Is it th classpath or something else that I cannot figure it out...
Your help would be appreciated...addressed to all of you wanting to help

Error starting J2EE after EP installation

Similar Messages

Maybe you are looking for