Error starting KF5: Kwin is not stable
Hi guys!
I just make a fresh install of Archlinux using the last ISO available (2015.05.01). I installed KF5 and the propietary drivers (catalyst-hd234k) for my old Radeon HD4770, otherwise I can not use my dual head setup with open source drivers because they freezes the system when I plug the second screen (under Kubuntu it was possible to use them, surprisingly)
Once I configured the screens using AMDCCC as it is described in the wiki, when I rebooted my system it fails to start a new session. It throws this error:
KWin is not stable. It seems to have stopped unexpectedly few times in a row. You can select another window manager.
But I don't have other choices: only KWin_X11
I guess that I have to use only one screen for the moment with the open source drivers.
Last edited by doblerone (2015-05-02 09:21:16)
I remember reading that you have to disable compositing (shift+alt+f12), then connect the second display, then re-enable compositing again to work.
Probably unrelated, but I've had the same message when I had selected an incompatible window decoration. Try switching to a tty and looking at the journal, it should state why kwin is crashing.
Similar Messages
-
CUCIMOC 8.0 Error "Start converstation capability is not available"
I've got a user that I'm trying to setup CUCIMOC 8.0 for. We're using the latest CUCIMOC client release, Office Communicator 2008 R2 at the latest CU level, and Call Manager 7.1. I've got everything setup for the user identically to how other (working) CUCIMOC users on our CM are setup. The user is able to login to the CUCIMOC client, and is able to use his phone to make calls, but when he tries to use the softphone he gets the error message:
"Failed to start converstation. Start conversation capability is not available."
Digging further, when looking at this device in CUCM Admin, the softphone device shows up as Active and Trusted, but doesn't show a registration.
Looking further, in the Core client log from his machine, I get the error below (indicating the softphone isn't able to register):
Any ideas?
2011-04-25 12:41:46,292 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Incoming --- SystemServiceEndpoint - <heartbeat xmlns="http://service.system.v2.soap.uc.cisco.com"><clientId>CUCIMOC-1</clientId></heartbeat>
2011-04-25 12:41:46,293 INFO [ws-pool-thread-2] [EventAdapter] [SpringWSServiceLogger.logMessage(137)] - SOAP Outgoing --- SystemServiceEndpoint - <ns2:heartbeatResponse xmlns:ns2="http://service.system.v2.soap.uc.cisco.com" xmlns:ns3="http://system.v2.soap.uc.cisco.com/types"><ns2:ok>true</ns2:ok></ns2:heartbeatResponse>
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_read_socket : socket error=92011-04-25 12:42:02,911 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-SIP_REG_STATE: 1/51, sip_reg_sm_process_event: SIP_REG_STATE_REGISTERING <- E_SIP_REG_TMR_RETRY2011-04-25 12:42:02,911 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,911 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIP : sip_tcp_detach_socket : Invalid socket2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmsub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiSetCcmConnStatus(175)] - Status of CCM 'mdsn-cmpub1' is NONE
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiLineRegState(119)] - Registration status for line:1 is:false
2011-04-25 12:42:02,912 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.lineNotify(777)] - Registration state not changed
2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (60) is invalid2011-04-25 12:42:02,912 ERROR [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(69)] - 17:42:02.911 [11d0] SIPCC-LINE_NUM: sip_platform_localexpires_timer_stop: Error: Line number (61) is invalid2011-04-25 12:42:02,912 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmsub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.911 [11d0] SIPCC-UI_API: ui_set_ccm_conn_status: ***********CUCM mdsn-cmpub1 Not connected***********2011-04-25 12:42:02,913 INFO [Thread-9 ] [SIP (C++)] [JavaTracer.NativeTraceCallback(73)] - 17:42:02.912 [12bc] SIPCC-UI_API: 1/0, ui_set_sip_registration_state: 02011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [JPlatUi.uiRegAllFailed(138)] - Registration failed for all lines:
2011-04-25 12:42:03,011 ERROR [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.regAllFailed(850)] - All registrations failed.
2011-04-25 12:42:03,011 DEBUG [Thread-19] [SoftPhoneProvider] [SoftPhoneConnectionContext.updateRegStateAllLines(1073)] - regState = falseHi,
Try the following-
1) Uninstall local antivirus/firewall
2) disable all network adapters except the one being used
3) update hardware driver such as video and audio
4) uninstall cucimoc and re-install using local admin permission
Also try the latest version cuci-lync 8.5.2 (it is compatible with OCS 2007 R2 and up)
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucimoc/8_5/english/release/cucimocReleaseNote.html#wp64340
http://www.cisco.com/cisco/software/release.html?mdfid=283665631&softwareid=283732952&release=8.5%282%29&relind=AVAILABLE&rellifecycle=&reltype=latest&i=rm
Thanks -
Error starting Queue Viewer: Could not load file or assembly
Dear All,
I'm having problems with Queue Viewer from my Windows 7 client.
The error has started from the Exchange 2013 SP1 installation on the Exchange Server; from that time, if I open the Queue Viewer from the Toolbox, I receive this error:
Could not load file or assembly 'Microsoft.Exchange.Data.Transport, Version=15.0.843.0.Culture=neutral, Public............... The system cannot find the file specified.'
Now I'm trying to install the SP1 on my local Windows 7 client, but the prerequisite check fail because it not find the necessary role.
There is a way to fix this problem?
ThanksHi ,
Please check the below mentioned links as well as check can you able to open the exchange toolbox directly in exchange 2013 sp1 servers.
http://support.microsoft.com/kb/2938053/en-us
http://blog.messageconcept.com/en/exsbr-on-exchange-server-2013-sp1/
After you install the exchange 2013 sp1 you need to install the hotfix mentioned on that link .
Regards
S.Nithyanandham
Thanks S.Nithyanandham
Thanks.
The queue viewer runs correctly on the Exchange Server and we don't use Third-party transport agents. -
Hello,
My bb phone curve 9320 3G shut down and kept flashing the led but couldnt start for a while, after i could start it, all my information was errased, like contacts and some apps, then when i tryied to adjust the clock time or any action at the "options" menu it would show this message in an pop up: Error starting net_rim_bb_options_app: Module 'net_rim_tid_core' not found.
So... what should i do? can anyone help me?
thanks in advance!!!
Solved!
Go to Solution.Try these workarounds:
Method 1
Connect the BlackBerry smartphone to the computer using an USB cable.
From an Internet browser, go to http://www.BlackBerry.com/updates.
Click Check for Updates and follow the prompts to upgrade the BlackBerry Device Software.
Method 2
If it is not already installed, download and install the latest version of BlackBerry Desktop Manager, which can be found at http://www.BlackBerry.com/support/downloads.
Connect the BlackBerry smartphone to the computer using an USB cable.
In BlackBerry Desktop Manager, open the Application Loader tool.
Under the Update Software section, click Start.
Follow the prompts to complete the upgrade process.
Good luck!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it. -
Dear all,
i hope any one can help me since i just download Nux Radio from Blackberry App world and the download done successfully, but when i want to run the application, i found error message: Error starting Nux_Radio: Module 'net_rim_bb_qm_platform' not found. is there anybody facing the same issue like me and how to solve the problem? thanks to adviceHello !
Try deleting the App and download it again from BlackBerry App World.
It seems there was some issue downloading the App properly.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest there time on this Message anymore.
Thanks. -
OK, spent about 25 frustrating hours so far this weekend doing everything recommended on numerous threads here -- uninstalling and reinstalling itunes and all Apple items. Help?
I am using Windows Vista home premium. After the last iTunes update to 12, it suddenly would not work. I followed, to a T, all instructions to uninstall all Apples software, in the correct order, reboot, download the latest iTunes, run as administrator, plug in the iPhone 5S, let the driver install, and then finish.
Along the way, I received the error that "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." I am the administrator and have privileges. (I previously followed instructions from anther thread to change the read-only privileges for Apple folders, but to no avail. I also deleted every file with the word Apple in it after I uninstalled everything.) I did a retry and then an ignore during installation of the AMD error, which I have received 10 times.
The other error I keep getting is: "iTunesHelper was not installed correctly. Please reinstall iTunes. Error 7." I have done that 20 times.
Other frequent error: "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)."
I followed other threads suggestions to install Windows .NET versions 3.5 and 4.0. No help. I also looked for various specific Apple files in various folders for DLLs, etc. Not present. I have rebooted 50 times and tried different users on my home account as well. Nothing.
I also followed instructions to Manage my computer under "services." Under Apple Mobile Device, the setting is for "automatic." When I try to get it to "start," the error I receive is "Windows could not start the Apple Mobile Device on Local Computer. Error 1053: The service did not respond to the start or control request in a timely fashion." (I followed previous thread instructions to use the CMD prompt to stop it. That caused problems because the status was then "stopped," but I was able to restart it later once I figured that out -- but with the 1053 error again.)
I think I've tried every suggestion in every thread for the four errors I keep getting (AMD failed to start; iTunesHelper Error 7; Windows error 998; and AMD Error 1053.) I am fresh out of ideas and very frustrated. I mostly want to make sure I don't lose my music and photos, which I was about to sync.
The only other thing I see that is strange on my computer (which I discovered along the way) is that I cannot receive automatic windows updates and have not had an update since 2012. My iTunes worked a month ago, so that was obviously not a show-stopper in the past, but perhaps there is a Vista update I need for iTunes 12? I have service pack 2 for Vista. I have followed all threads to try to set my windows to automatic update, but no joy there either. It checks for updates and then fails. I followed instructions and did run an installation to install windows automatic updates, but that doesn't work either. I tried 10 times. It runs and takes a while, but is never able to successfully update windows. It says "checking for updates" for a while. Then it dies. My last update was 6/19/12 (failed) and it says the most recent check was 6/22/12, but I have tried 20 times on 10/31/14 and 11/1/14.
When asked to "Install new Windows Update software" to check for updates, I have done so 10 times. It downloads and installs, but never works.
It's an old Dell desktop computer from 2006, and I'm using an iPhone 5S. I am fresh out of ideas. Anyone really smart here?
Thanks.
TristanUpon latest reboot, I also received this error message: "The application failed to initialize properly (0xc0000005). Click OK to terminate the application."
Then I got the iTunesHelper not installed correctly error again.
Then the "Windows can't check for updates" error message.
Then "Apple Push has stopped working." Then a quick DEP error message that disappeared but said something about Apple Push being closed.
I'm also getting denials of service logged by McAffee. Not sure if I'm getting a virus/attack or not.
Not sure if it's a problem with my old desktop machine, my Windows Vista updates, or iTunes, but I'm very frustrated and out of ideas to try.
Thank you for your help!
Tristan -
Can someone please help me get my iPhone to sync to your computer?
I can not sync my iPhone to the computer. I keep getting up an error message that synchronization does not want to start. I have uninstalled iTunes and then reinstall it. But the same warning box will appear. How can I get my phone in sync again?Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
when I tried to update to the new version of Itunes - message box appears "APSDAEMON.EXE MSVCR80.DLL is missing". Then another box indicates "Error 7 (Windows error 126)". Itunes will not start. Can someone tell me what the problem is and how to fix?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I updated my itunes the other day and now it won't open I get error message saying "application failed to start because MSVCR80 was not found" When I close that window I get message stating Itunes was not installed correctly Error 7 Windows error 126. My PC is a Acer and I'm running Windows Visa. I tried to uninstall Itunes and reinstall it and get same message. Can anyone help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99659) -
I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
Thanks!Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac. -
Suddenly iTunes didn´t function. Trying to reinstall Ifirst tried to delete the program and all iTunes files, but ITunes Helper could not be deleted. After installation (with anti virus disconnected) the following error messages come up: "MS Visual C++ Runtime Library R6034 - attempt to load C routine library incorrectly", "Cannot start Apple Mobile Device", "Not correctly installed. Error 7 (windows error 1114" What to do?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Trying to run Migration Assistant on a PC (Windows XP). Error message "Outlook Express could not be started. The application was unable to initialize the store directory. Your computer may be out of memory or your disk is full. Contact Microsoft support for further assistance. (0x80007114)" Then the Migration Assistant shows a box stating that Outlook Express must be stopped before running the assistant.
I have enough memory. The disk is not full. Outlook Express runs just fine on my PC. And it was not runing at the time.
Apple Support (two tries) and my Apple store have essentially said this is a Microsoft problem. Of course, Microsoft says it is an Apple program failing so it is an Apple problem.
MS info about the error indicates that it prevents OE from starting. Than is not my situation at all. The fix is draconian (as many are) and could risk my OE so I have not gone there - yet. Hopefully there is another way.
Does anyone have any experience on how to (easily) solve this dilemma. I am also trying on the MS side.
This is my first MAC. I was convinced to go Apple by several folks who touted the excellent support. It was purchased in July 2012 and has been a boat anchor since. Support??
Thanks for any info you can provide.So I had this as well.
I went to the file tab and went to export. From there I picked 720p and it worked. It may be different for you depending on the resolution of the video. hopefully it works for you too! -
Error starting DBConsole. DBConsole could not be started successfully
Hello All.
How to fix the following failure on Windows XP SP2.
Oracle application server 10g release 2 (1.2.0.2)
1-SEVERE: Error starting DBConsole. DBConsole could not be started successfully
2-Configuration assistant "Single Sign-On Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Mar 31, 2006 1:33:03 PM oracle.sysman.emcp.EMConfig updateReposVars
INFO: Updating file C:\oracle\infra10g1202\sysman\emdrep\config\repository.variables ...
Mar 31, 2006 1:33:18 PM oracle.sysman.emcp.EMConfig addPortEntries
INFO: Updating file C:\oracle\infra10g1202\install\portlist.ini ...
Mar 31, 2006 1:33:18 PM oracle.sysman.emcp.EMConfig updateEmdProps
INFO: Updating file C:\oracle\infra10g1202\sysman\config\emd.properties ...
Mar 31, 2006 1:33:20 PM oracle.sysman.emcp.EMConfig updateConfigFiles
INFO: targets.xml file is updated successfully
Mar 31, 2006 1:33:20 PM oracle.sysman.emcp.EMConfig updateEmomsProps
INFO: Updating file C:\oracle\infra10g1202\sysman\config\emoms.properties ...
Mar 31, 2006 1:33:21 PM oracle.sysman.emcp.EMConfig updateConfigFiles
INFO: emoms.properties file is updated successfully
Mar 31, 2006 1:33:37 PM oracle.sysman.emcp.EMConfig copyOC4JDir
WARNING: Error copying OC4J config files from C:\oracle\infra10g1202\oc4j\j2ee\OC4J_DBConsole to C:\oracle\infra10g1202\oc4j\j2ee\OC4J_DBConsole_srdb-pc05.tamer.com_as10gdb
Mar 31, 2006 1:33:37 PM oracle.sysman.emcp.EMConfig startOMS
INFO: Starting the DBConsole ...
Mar 31, 2006 1:38:38 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting DBConsole. DBConsole could not be started successfully
Configuration assistant "Oracle Database Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Single Sign-On Configuration Assistant":
Parameters passed to ssoca : param0:config param1:C:\oracle\infra10g1202 param2:cn=orcladmin param3:***** param4:AMERICAN_AMERICA.WE8MSWIN1252 param5:http param6:srdb-pc05.tamer.com param7:7777 param8:en
Fri Mar 31 13:45:16 EST 2006
Parameters received by ssoca : param0:config param1:C:\oracle\infra10g1202 param2:cn=orcladmin param3:***** param4:AMERICAN_AMERICA.WE8MSWIN1252 param5:http param6:srdb-pc05.tamer.com param7:7777 param8:en
Content of ssoca config file is :
-- listing properties --
config_sso_oid=true
config_lang=true
config_sso_seed=true
config_targets_xml=true
config_ssoupg=true
config_dad=true
config_em_integ=true
ACTION by SSOConfigAssistant :
C:\oracle\infra10g1202\bin\sqlplus orasso/*****@"cn=as10gdb,cn=oraclecontext"
@C:\oracle\infra10g1202\sso\admin\plsql\sso\ssoseedi.sql http srdb-pc05.tamer.com 777
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 31 14:45:19 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected.
SQL> SQL> exit;
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options
ACTION by SSOConfigAssistant :
C:\oracle\infra10g1202\bin\sqlplus orasso/*****@"cn=as10gdb,cn=oraclecontext"
@C:\oracle\infra10g1202\sso\admin\plsql\sso\ssooidd.sql srdb-pc05.tamer.com 636 "cn=orcladmin" ***** Y
SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 31 14:45:24 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> Connected.
SQL> Creating OID entries for SSO
Error code : 1
Error message: User-Defined Exception
LDAP error : 28862: UnKnown Error Encountered
ERROR: deleting application entry
Error code: 1
Error message: User-Defined Exception
ERROR: creating SSO users and groups in OID
PL/SQL procedure successfully completed.
*** Refreshing WWC OID cache....***
declare
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "ORASSO.WWSEC_OID", line 1199
ORA-06512: at "ORASSO.WWSEC_OID", line 1328
ORA-06512: at "ORASSO.WWSEC_OID", line 2498
ORA-06512: at "ORASSO.WWSEC_OID", line 2528
ORA-06512: at "ORASSO.WWSEC_OID", line 1606
ORA-06512: at "ORASSO.WWSEC_OID", line 1755
ORA-06512: at "ORASSO.WWSEC_OID", line 2133
ORA-06512: at line 8
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
With the Partitioning, OLAP and Data Mining options
ERROR : Exception while configing SSO DAD :
java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.CommunicationException: Request: 1 cancelled
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1473)
at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
Please fix the error reported in the stack trace above and re-run SSO Config Tool.
Repository API Raised Exception : oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://srdb-pc05.tamer.com:389/. Base Exception : javax.naming.CommunicationException: simple bind failed: srdb-pc05.tamer.com:389 [Root exception is java.net.SocketException: Socket closed]
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://srdb-pc05.tamer.com:389/. Base Exception : javax.naming.CommunicationException: simple bind failed: srdb-pc05.tamer.com:389 [Root exception is java.net.SocketException: Socket closed]
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getColocatedDBConnect(IASSchema.java:657)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:767)
at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:406)
at oracle.security.sso.SSOConfigAssistant.configTargetsXML(SSOConfigAssistant.java:1847)
at oracle.security.sso.SSOConfigAssistant.updateTargetsXML(SSOConfigAssistant.java:1786)
at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1280)
at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
Please fix the error reported in the stack trace above and re-run SSO Config Tool.
Setting the AS product version value in targets.xml to be "10.1.2.0.2".
Calling method getASTargetInfo.
getASTargetInfo: oracleHome = "C:\oracle\infra10g1202".
getASTargetInfo: iasName = "infra10g1202.srdb-pc05.tamer.com".
getASTargetInfo: iAS Target Type = "oracle_ias".
getASTargetInfo: StatusURL value = "http://srdb-pc05.tamer.com:7777".
Retrieved SSO protocol, host, and port info from targets.xml.
The values are: "http://srdb-pc05.tamer.com:7777".
The following values will be used to configure the sso_server target entry in targets.xml.
Protocol: "http".
Hostname: "srdb-pc05.tamer.com".
Port: "7777".
C:\oracle\infra10g1202\jdk\bin\java
-cp
C:\oracle\infra10g1202\lib\xmlparserv2.jar;C:\oracle\infra10g1202\sysman\webapps\emd\WEB-INF\lib\emd.jar;C:\oracle\infra10g1202\sysman\webapps\emd\WEB-INF\lib\log4j-core.jar;C:\oracle\infra10g1202\lib\emSDK.jar
-DORACLE_HOME=C:\oracle\infra10g1202
oracle.sysman.emSDK.conf.TargetInstaller
addtarget
C:\oracle\infra10g1202\sso\sso_server_target2add.xml
Configuring SSO languages with the following language code:
us
Language us is already installed.
About to execute java call using emConfigInstall.jar.
Here are the arguments:
C:\oracle\infra10g1202\jdk\bin\java
-DORACLE_HOME=C:\oracle\infra10g1202
-jar
C:\oracle\infra10g1202\jlib\emConfigInstall.jar
consolesn
C:\oracle\infra10g1202\sso\conf\consoleConfigSNSegment.xml
Finished executing the call.
Child Process has exited.
SSO Configuration Assistant failed.
Configuration assistant "Single Sign-On Configuration Assistant" failedI am getting a similar error in iAS 10g R2 on Windows 2003 64-bit. Did you solve your problem? Am I better off using Windows 2003 32-bit instead?
Edited by: jkrich on Apr 7, 2011 8:33 PM -
My operating system is Windows XP SP3. I have Adobe 11.0.08 installed. I cannot print a pdf file/document. Error message - AeroRd32.exe - Unable To Locate Component - "Application failed to start because lxdautil.dll not found." Any suggestions?
That DLL is part of your printer driver; reinstall or update the device driver for your printer, and the message should go away.
-
Hello dps team,
A few weeks ago we renewed our dps licence. Now we want to release our newest issue but we can't. Following error message appears "At the attempt to release the folio creates an error. The process could not be started. Please try again later."
Is there a problem with our dps version or any maintenance work at the servers from Adobe?
Best,
OliverHi Oliver,
Please login to your DPS dashboard and contact support by clicking "Contact support" at the bottom left
Thanks
Lohrii
Maybe you are looking for
-
I have a mid 2010 13" macbook pro. After a logic board repair the internal mic doesn't work. The system recognises it but it picks up no sound at all. I've also tried an external mic that connects via the line in port and it suffers the same problem
-
Where can i download adobe acrobat 9 standard
my key is in my products on my adobe. no download link, where can i download 9 standard?
-
I typed this question I opened a command prompt to see my java ln -s command, and now a large portion of that window is now part of the website background. Right now, part of the browsers top and menus are part of the website background as well as th
-
This is a weird one. One of our white Intel iMacs has no network connections. It has been fine since new and now it won't connect to a network. If I use a good, known to be working Ethernet cable, it says it is not plugged in when it clearly is, and
-
Struts/servlet page flow problem due to j2ee security
Whe I type url such as http://localhost:7777/myapp/action.do, I want to see the execution result page from this action. However the result page will always be index.jsp because j2ee security which I have a loginaction.do and its result page is index.