Error starting net_rim_bb_dryad_gui:symbol 'Security.deviceUnderAttack' not found

everything deleted off my curve 9300 when i updated the phone yesterday. I need to try and restore everything using Blackberry Protect but now it wont open. It just says error starting net_rim_bb_dryad_gui:symbol 'Security.deviceUnderAttack' not found. Any help would me much appreciated. Thanks

That software has some compatibility issues. You use BBDM (BB Desktop Manager) which is recomended from the BB authorities.
Now you are in a situation that you cannot use BBDM because you use BB protector software to backup your data. if your file extention is ipd then it wil work
Here you can do to resolve your problem
If your backup extention is IPD then you can use BBDM either BB protector
If not then download again the latest version from the web of BB protector and try to restore you data.
If that work then thats great and from now on dont use BB protector
If not then try to restore from another pc
if that dont work then you dont have any choice but to loose you data.
Thats the only solutions you found on any where.
Need any help let me know.

Similar Messages

Error starting syncclient_ba_bb9530: Symbol'BlackberryPIM.openUnifiedPIMList' not found

Please help. I am trying desperately to download Backup Assistant to my Storm and keep receiving the above error message when I try to run the program even though it says it was successfully installed. I have searched message boards, tried to navigate Verizon's support Web site, spent an hour-and-a-half on phone with tech support this morning and was basically told, "Sorry I don't know how to help you." I have uninstalled and reinstalled the app SEVERAL times. I have "rebooted" the phone. I dialed *228 and selected option 2. I took the battery out and replaced. I have updated/downloaded everything I can think of. I registered the host routing table again. I enabled all permissions to "allow."
After all that, I gave up and downloaded the BlackBerry desktop manager software to my laptop and when I connected my phone with USB and told it to backup/sync, it gave me another error message.
The only conclusion I have come to is this phone is a lemon several times over.
SOMEONE AT VERIZON PLEASE HELP. I have a new Storm 2 I want to activate but cannot do so until I get my contacts off this Storm.

I ran into this error upgrading a Storm to an Droid 2. Here's what I learned.
1. The Storm had an old OS, one that had never been upgraded during ownership. When I installed Blackberry Desktop Manager it wanted to push out the latest OS - so I realized that may have been part of the problem.
So anyone running into this problem might want to consider upgrading the Storm OS. It seems a lot of work given that you are going to throw the phone in a drawer, so onto #2.
2. In desperation I googled Blackberry Android and found an article on what you should know when upgrading from one to the other. The article mentioned Google Sync - so I downloaded that on to the storm, then synced to the Gmail account. That pushed up the contacts.
After I activated the Droid 2, I was forced to sync to Google as part of the install - and sure enough, the contacts were there. I could have saved a couple of hours researching this error and on the phone with the VZ Helpless Desk had I read this article first.
So anyone running into this error in the future, try the above solutions before you waste your time like I wasted mine. And oh, if you have any doubts about upgrading from the Storm to Android, set them aside. I can't believe I suffered with the Storm for as long as I did. When I switched to the Droid X it felt like I had been swimming with one arm tied behind my back, and with the Droid X I suddenly felt like I not only had both arms, but flippers too.
Enjoy!

Error starting net_rim bb_options_app: Module 'net_rim_tid_core' not found

Hello,
My bb phone curve 9320 3G shut down and kept flashing the led but couldnt start for a while, after i could start it, all my information was errased, like contacts and some apps, then when i tryied to adjust the clock time or any action at the "options" menu it would show this message in an pop up: Error starting net_rim_bb_options_app: Module 'net_rim_tid_core' not found.
So... what should i do? can anyone help me?
thanks in advance!!!
Solved!
Go to Solution.

Try these workarounds:
Method 1
Connect the BlackBerry smartphone to the computer using an USB cable.
From an Internet browser, go to http://www.BlackBerry.com/updates.
Click Check for Updates and follow the prompts to upgrade the BlackBerry Device Software.
Method 2
If it is not already installed, download and install the latest version of BlackBerry Desktop Manager, which can be found at http://www.BlackBerry.com/support/downloads.
Connect the BlackBerry smartphone to the computer using an USB cable.
In BlackBerry Desktop Manager, open the Application Loader tool.
Under the Update Software section, click Start.
Follow the prompts to complete the upgrade process.
Good luck!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

BB protect: Error starting net_rim_bb_dryad_gui:Class 'net.rim.device.api.iui.theme.Themes$Writer' not found

Hello there.
I am using a blackberry curve 8520. It came with version 4 of the OS. I upgradede it yesterday, 15 feb to version 5. After the upgrade so far I am experiencing 2 technical problems.
1 is with the blackberry protect app. which when I launch give me this error message: BB protect: Error starting net_rim_bb_dryad_gui:Class 'net.rim.device.api.iui.theme.Themes$Writer' not found with an OK button.
2. When I enter the blackberry app world it give me the following message: A BlackBerry Idenity update is neeeded. Would you like to install it now ? yes/no. The problem here is, it never installs, tried it the whole day yesterday as I am still trying it now. I have rebooted the device, removed battery and sim several times. Still. This is what it give me instead. Blackberry idenity installation failed. Please try again later. (80003).
Sorry if I am askign basic questions but I am not a techy person at all. Thanks in advance,

Hi and welcome to the forums!
We need to fix your issues in reverse order.
The Blackberry Protect program requires a valid Blackberry ID to operate.
(To use BlackBerry Protect you must have the following items:
• BlackBerry® ID account
• Data plan from your wireless service provider)
I suggest we use KB29613 to fix the Blackberry Identity problem.
Once your Blackberry ID is established you can access Blackberry App World
and download the latest version of Blackberry Protect.
Let us know how it goes!
Thanks,
Bifocals
KB29613 The error "BlackBerry Identity installation failed. Please try again later. (80003)" is displayed within BlackBerry App World
User Guide - BlackBerry Protect
Security Note - BlackBerry Protect
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error in starting the service Oracle CSService not found

Hi all,
i am trying to install Oracle Enterprise manager grid control,
i am getting the following error message
"error in starting the service Oracle CSService not found"
when i checked in the "services.msc" the Oracle CSService is not started, so i tried to start the service, but its not starting and giving the error message as "error 3 system cannot find the path specified"
then i checked in the service properties, and the path is pointing to a different directory,
now i want to change this path to the correct oracle bin directory.
any views how to cnage/update this path in the services.msc, for "Oracle CSService"
Thanks alot.

Hi
i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
Thanks to all the viewers.

Updating iTunes with error message "this application has failed to start because MSVCR80.dll was not found"?

After updating iTunes, has anyone got the message "this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." message and "iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 126)"? I've tried everything from un-installing and re-installing iTunes to deleting the SC Info. Any help would be greatly appreciated

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99840)

HT6001 I have tried numerous time to update iTunes to Version 11.1.4. Each time it has failed. I get the message of "This application has failed to start because MSVCR80.dll was not found". Also I get a message of "Error 7". Advise please.

I have tried numerous time to update iTunes to version 11.1.4. It has failed every time. Now I can't even get into iTunes on my PC. The message I get is "This application has failed to start because MSVCR60.dll was not found. Re-installing the application may fix the problem." Okay. Which application? What steps are needed for this process?
Also, I get this message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)" Could someone please assist me in the steps necessary to remedy this issue. Thanks.

For many users at this point in time (iTunes 11.1.4.62) uninstalling iTunes alone is not enough and they may need to undertake further steps...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.d11 was not found." I have uninstalled and reinstalled iTunes multiple times. Am running Windows XP Svc Pack 3. help

I recently tried to update iTunes to 11.1, and am now getting an error message "This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix this problem." I have uninstalled and reinstalled iTunes several times with no success. I am running Windows XP Svc Pack 3. Help please.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99753)

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?

See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error.

My iTunes will not start. The box on the error message APSDaemon.exe, And message says "This application failed to start because MSVC80.dll was not found. Reinstalling may fix." I did the reinstall and I get the same error. The error first happened after I approved the an iTurns update.

Same problem today. Took five times to reinstall without any error messages. Apple has posted a way to fix and you should follow their's first. I finally got to upldate correctly by doing their fix but with one difference. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replace)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not specifically put in their fix but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try. Even updated my ipad to make sure everything was working.

When starting my computer I get the error message "AppleSyncNotifier.exe Entry point not found. this has only appeared since my last upgrade.

Since recently upgrading to the latest ITunes,on start up I get an error message:
"AppleSyncNotifier.exe Entry point not found .
Procedure entry point xml TextReader Constname could not be located in
the dynamic link library libxml2.dll"
Any body come across this? Any solutions?

Doublechecking, Dad:
I have also reloaded all other iTunes software.
Did you use the following document as a guide?
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(If we're looking at program file damage down in Apple Application Support or Apple Mobile Device Support, the 2. Verify iTunes and related components are completely uninstalled section is very important.)

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

Any answers how to fix it? All Im getting is error for the past 3 days!

TS3212 I cannot get the new iTunes to start in Windows Vista. I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.

I get an error that states "This application has failed to start because MSVCR80.dll was not found". Reinstalling does not help.I have tried removing iTunes and reinstalling, I have tried "repairing" option at reinstall, nothing seems to work.

Read this:
iTunes 11.1.4 for Windows - Unable to install or open - MSVCR80 issue

Error starting net_rim_bb_dryad_gui:symbol 'Security.deviceUnderAttack' not found

Similar Messages

Maybe you are looking for