Error starting OBIEE 11G coreapplications after loading new RPD file in EM

Hi,
After I have loaded my new RPD in EM, and restarting the BI coreapplications.
Basically the symptoms I am getting are very similar to this: https://kr.forums.oracle.com/forums/thread.jspa?threadID=2129556, I have tried removing other (sampleLIte RPDs) with no luck. Not sure what else I can do. The RPD's physical layer draws data from SQL Server. Have tested the system DSN and its ok.
Here is a screenshot of the Error: http://i.imgur.com/eDZBM2Z.png. Any help appreciated.
Using OBEE 11G in Windows 7.

Its weird.
As part of my own investigation, I went to physical layer and saw my SQL Server was set wrong. I set it to 2008 the correct version.
Also my ODBC was set at 3.5, I changed this to 2.0. After doing this I saved it and reloaded it onto EM and it all worked. Just to verify that this was indeed the root cause, I reverted the settings back to original and loaded it again. It works.
Not sure in the end what was the root cause.

Similar Messages

Unable to Start OBIEE 11g Presentation Services,Javahost and BI Server

Hi All,
my friend installed OBIEE 10g and OBIEE 11g installed in same system.now i am unable to start OBIEE 11g obi server,presentation services,java host when i see in the properties presentation services ,obi server and java host in services.msc the path here is pointing to obiee 10g sawserver,javahost and presentation services.
Reply ASAP.
Thanks
Kiran Kumar

Nitin,
My sawlog0.log file has last updated at month May. Hope it is not helpful... any thing else i can do?
[2013-05-27T19:32:23.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0] [tid: ] Server shutdown initiated by OPMN.[[
File:socketrpcserver.cpp
Line:824
Location:
    saw.rpc.server.listen
    saw.sawserver
ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0
[2013-05-27T19:32:23.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0:14] [tid: 9400] Failed to restore ctx from reference[[
File:executioncontext.cpp
Line:286
Location:
    saw.dms.conext.unwrap
    saw.threadpool.socketrpcserver
    saw.threads
ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0:14
ThreadID: 9400
[2013-05-27T19:32:23.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:698
Location:
    saw.sawserver
    saw.sawserver.terminatesawserver
    saw.sawserver
ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though

Column Formula with Error in OBIEE 11g

Hello,
On Oracle Business Intelligence Enterprise Edition 11g, I am trying to create an analysis. The database is MySQL. In the database, there is a field of type varchar(10). This
field shows a date. In OBIEE 11g, when creating the analysis, in the Criteria tab, I choose this column (varchar) and edit the formula of it. The operation that I want to do is:
YEAR(CURRENT_DATE) - SUBSTRING("TableName"."ColumnName" FROM 1 FOR 4) where the ColumnName is the name of the column of type varchar(10)
but I get an error: +[nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <->: Syntax error [nQSError: 26012]+
If I execute the same query directly on the MySQL database, I get the desired result without any error.
Also, if I use the following formula, I also get an error:
CAST((SUBSTRING("TableName"."ColumnName" FROM 1 FOR 4)) AS INTEGER)
So, I am asking why the first query throws an error in OBIEE 11g but not when it runs directly on the MySQL database. Also, how can I convert in OBIEE 11g a string to integer?
Thank you in advance,
Griselda

Business Intelligence Foundation wrote:
Hi
Im getting below error in Bi11g. core application services is down.
Error:
[nQSError: 46066] Operation cancelled.
[nQSError: 46067] Queue has been shut down. No more operations will be accepted.
If anyone Know tell me.
Thanks and Regards
sathyaHi sathya,
It could mean several different things. Do you know if the administrator have shut down the services? If you have access to the server, check to see if all the services are up and running.
Thanks,
-Amith.

Weblogic Startup Stuck While Starting OBIEE 11g Services

When starting OBIEE 11g, startup stuck with this message:
<Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Notice> <Log Management> <BEA-170019> <The server
log file D:\app\oracle\product\OBI11G\user_projects\domains\bifoundation_domain\
servers\AdminServer\logs\AdminServer.log is opened. All server side log events w
ill be written to this file.>
Please help what could be the cause for this.
Thanks

Hi, can u please explain in details how to remove locks and which locks u remove on Weblogic Admin Server ?
I met the same issues here and already try to remove :
a) $DOMAIN_HOME/servers/<server_name>/tmp/<servermame>.lok
b) $DOMAIN_HOME/servers/<server_name>/data/ldap/ldapfiles/EmbeddedLDAP.lok
Thanks.

My MacBook Pro starts and shuts off after loading for sometime

My MacBook Pro starts and shuts off after loading for sometime

Try starting in Safe mode by holding down the Shift key while booting. Safe mode takes a while to load the OS. After that, restart the computer normally.
If that does not work, start up in Recovery by holding down the Command and R keys. In the window that opens, choose Disk Utility at the bottom and verify and repair your disk. Repair permissions while you are there.

I can't enter any values in JTextField after loading the flash files.

Hi to all,
In my application I have two panels. One panel has JTextField and another panel i loaded flash files.
The flash files are build by CS4. I'm using JDIC to load the flash files. While open the application i loaded flash file and I try to enter any input in the textfiled, but I can't. After minimize and maximize the application I can enter the values. This problem happens only after I change the jre version from 1.6 to 1.7.
While loading flash files I'm getting the below exception.
org.jdesktop.jdic.init.JdicInitException: java.io.IOException: The filename, directory name, or volume label syntax is incorrect
at org.jdesktop.jdic.init.JdicManager.initBrowserNative(Unknown Source)
at org.jdesktop.jdic.browser.WebBrowser.<clinit>(Unknown Source)
pls give me a solution.
Thanks in advance...:)

I can't enter any values in JTextField after loading the flash files., locking.

Strange Error in OBIEE 11g

Hi Friends,
Currently, i was working in mapping feature in obiee 11g. For that i have added
<li>Necessary <spatial tags> in instanceconfig.xml file.
<li>Created a new datasource in the mapviewer and brought it to the online.
<li> After that i went into analytics page and under the Administration tab--->Manage Map Data-->Import Layers
<li> Soon after pressing it an import layers dialog box has to open, but instead of it for me the following error is occurring
There was an error with the server CallBecause of that, it is not allowing me to select layers. what may be the problem over here.
All izz Well
GTA

GTA,
Did you perform the Map Builder Application part here before Administration tab--->Manage Map Data-->Import Layers
http://www.oracle.com/technetwork/middleware/mapviewer/downloads/index-100641.html
Refer http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-map-views-integration-with-mapviewer/
Hope this helps

Starting OBIEE 11g on Linux 64 bit

Hi,
I installed OBIEE 11g on Linux 64 bit and it worked fine after installation. I rebooted the system and I need to start it again.
I am trying to run
run-sa.sh
run-saw.sh
etc.
but it looks like the scripts are broken:
./run-saw.sh: line 43: syntax error near unexpected token `('
./run-saw.sh: line 43: `ANA_INSTALL_DIR=$N($P(installLocation))'
it looks like these scripts were not processed by the installer during installation, $N($P(installLocation)) should have been replaced by the installer with actual paths I assume.
is there another way to start OBIEE?
Thanks,
Calin

Are you sure you are running OBIEE 11g? YOu are meant to use those scripts any more in 11g. See this post:
Startup Scripts for OBIEE 11g on Linux

Unable to Start OBIEE 11g Presentation Server

Hello All,
I am trying to Start the OBIEE 11g (11.1.1.6) Services. Checked EM, Presentation Server is showing Down. Not Started.
Tried to Restarted the particular service alone, but no use. Getting the below error messages...
Module - oracle.sysman.emai.view.bi.AvailabilityView
Message - Can not restart selected component.
Supplemental - Detailoracle.sysman.emai.model.bi.ModelException: Failed to invoke method: start for bean: oracle.biee.admin:oracleInstance=instance1,type=BIDomain.BIInstanceDeployment.BIComponent,biInstance=coreapplication,process=coreapplication_obips1,
group=Service
Message - Error in starting component: oracle instance: instance1, component: coreapplication_obips1
Supplemental - Detail oracle.bi.management.adminservices.opmn.ProcessControlException: Operation Failed: start; OracleInstance: instance1; Component: coreapplication_obips1; msg: 0 of 1 processes started.
Message    - MBean operation failed.
Supplemental - Detail    oracle.bi.management.adminservices.model.ProcessManagementException: Unable to start process: instance1: coreapplication_obips1
Please let me know if you need more details.
Thanks in Advance...

Nitin,
My sawlog0.log file has last updated at month May. Hope it is not helpful... any thing else i can do?
[2013-05-27T19:32:23.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.rpc.server.listen] [ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0] [tid: ] Server shutdown initiated by OPMN.[[
File:socketrpcserver.cpp
Line:824
Location:
    saw.rpc.server.listen
    saw.sawserver
ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0
[2013-05-27T19:32:23.000+05:30] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0:14] [tid: 9400] Failed to restore ctx from reference[[
File:executioncontext.cpp
Line:286
Location:
    saw.dms.conext.unwrap
    saw.threadpool.socketrpcserver
    saw.threads
ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0:14
ThreadID: 9400
[2013-05-27T19:32:23.000+05:30] [OBIPS] [NOTIFICATION:1] [] [saw.sawserver] [ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0] [tid: ] Oracle BI Presentation Services are shutting down.[[
File:sawserver.cpp
Line:698
Location:
    saw.sawserver
    saw.sawserver.terminatesawserver
    saw.sawserver
ecid: 00iF4UG0tAx7m3XPxuDwXW0002Vk000005,0

Security service error in OBIEE 11G LDAP configuration

Hello
I've recently set up some OBIEE 11G installations and they appear to work ok.
I've more recently been using various guides on the internet to configure OBIEE 11G and Active Directory and can see the users and groups within Weblogic that belong the to the Provider that i've configured.
However, when I attempt to start up OPMN, it always gives me the error like the following:
<Jun 24, 2013 1:45:38 PM NZST> <Warning> <oracle.jps.idmgmt> <BEA-000000> <Requested Object Class (user)not found in cache.
oracle.security.idm.OperationFailureException: Requested Object Class (user)not found in cache.
<Jun 24, 2013 1:52:20 PM NZST> <Error> <oracle.bi.security.service> <OBI-SEC-00004> <Unable to initialize oracle.bi.security.service.SecurityWebService>
I initially had the User Object Class as User in the Provider configuration and noticed it wasn't in the LDAP directory so I tried changing it to a Object Class that did exist for one of the users but it made no difference. It still says the same error message even though I have no reference to User in the configuration.
Can anyone suggest something I might be doing wrong or missing?

I have followed the same configuration. However i am getting the following error when i try to login
Caused by: oracle.bi.security.service.SecurityServiceException: SecurityService::authenticateUserWithLanguage - '<LDAP user>' was authenticated but could not located within the Identity Store.
I guess some configuration issue, but cannot be able to spot the error. Please let me know your idea
Thanks

Unable to start OBIEE 11g Sevices on Windows 7

Hello,
I have successfully installed OBIEE 11g server on windows machine 64 bit
When I start BI services from all programs I get following error :
SVR_GRP =
JAVA Memory arguments: -Xms256m -Xmx1024m -XX:MaxPermSize=512m -XX:-UseSSE42Intr
insics
WLS Start Mode=Production
CLASSPATH=C:\MWH\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\MWH\Oracle
BI1\bifoundation\jdbc\jdk16\bijdbc.jar;;C:\MWH\patchwls1035\profiles\default\s
ys_manifest_classpath\weblogic_patch.jar;C:\MWH\ORACLE~2\jdk\lib\tools.jar;C:\MW
H\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\MWH\WLSERV~1.3\server\lib\weblogic.ja
r;C:\MWH\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\MWH\WLSERV~1.3
\server\lib\webservices.jar;C:\MWH\modules\ORGAPA~1.1/lib/ant-all.jar;C:\MWH\mod
ules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\MWH\wlserver_10.3\server\lib\weblogic.j
ar;C:\MWH\oracle_common\modules\oracle.dms_11.1.1\dms.jar;C:\MWH\oracle_common\m
odules\oracle.jmx_11.1.1\jmxframework.jar;C:\MWH\oracle_common\modules\oracle.jm
x_11.1.1\jmxspi.jar;C:\MWH\oracle_common\modules\oracle.odl_11.1.1\ojdl.jar;C:\M
WH\ORACLE~1\soa\modules\commons-cli-1.1.jar;C:\MWH\ORACLE~1\soa\modules\oracle.s
oa.mgmt_11.1.1\soa-infra-mgmt.jar;C:\MWH\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.
jar;C:\MWH\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\MWH\WLSERV~1.3\server\
lib\xqrl.jar
PATH=C:\MWH\patch_wls1035\profiles\default\native;C:\MWH\WLSERV~1.3\server\nativ
e\win\x64;C:\MWH\WLSERV~1.3\server\bin;C:\MWH\modules\ORGAPA~1.1\bin;C:\MWH\ORAC
LE~2\jdk\jre\bin;C:\MWH\ORACLE~2\jdk\bin;C:\Program Files\Java\jdk1.7.0_13\bin;C
:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Windows\system32;C:\Windows;C
:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\MWH\Oracl
e_BI1\products\Essbase\EssbaseServer\bin;C:\MWH\Oracle_BI1\bin;C:\MWH\Oracle_BI1
\opmn\bin;C:\MWH\Oracle_BI1\opmn\lib;C:\MWH\Oracle_BI1\perl\bin;C:\Program Files
\Java\jre7\bin;C:\Program Files\Java\jdk1.7.0_13\bin ;C:\Program Files\Java\jdk1
.7.0_13\bin;C:\oraclexe\app\oracle\product\11.2.0\server\bin;C:\Windows\system32
;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
;C:\MWH\Oracle_BI1\products\Essbase\EssbaseServer\bin;C:\MWH\Oracle_BI1\bin;C:\M
WH\Oracle_BI1\opmn\bin;C:\MWH\Oracle_BI1\opmn\lib;C:\MWH\Oracle_BI1\perl\bin;C:\
Program Files\Java\jre7\bin;;C:\MWH\WLSERV~1.3\server\native\win\x64\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
'C:\MWH\ORACLE~2\jdk\bin\java' is not recognized as an internal or external comm
and,
operable program or batch file.
Starting WLS with line:
C:\MWH\ORACLE~2\jdk\bin\java -server -Xms256m -Xmx1024m -XX:MaxPermSize=512m -
XX:-UseSSE42Intrinsics -Dweblogic.Name=AdminServer -Djava.security.policy=C:\MWH
\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.ProductionModeEnabled=true -D
oracle.home=C:\MWH\Oracle_BI1 -da -Dplatform.home=C:\MWH\WLSERV~1.3 -Dwls.home=
C:\MWH\WLSERV~1.3\server -Dweblogic.home=C:\MWH\WLSERV~1.3\server -Dcommon.comp
onents.home=C:\MWH\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Lo
g=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\MWH\USER_P~1\doma
ins\BIFOUN~1 -Djrockit.optfile=C:\MWH\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket
optfile.txt -Doracle.server.config.dir=C:\MWH\USERP~1\domains\BIFOUN~1\config\
FMWCON~1\servers\AdminServer -Doracle.domain.config.dir=C:\MWH\USER_P~1\domains\
BIFOUN~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\MWH\USER_P~1\domains\BIF
OUN~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\MWH\USER_P~1\domains\BIFO
UN~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\MWH\USER_P~1
\domains\BIFOUN~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\M
WH\USER_P~1\domains\BIFOUN~1\servers\AdminServer\tmp\_WL_user -Doracle.deployed.
app.ext=\- -Dweblogic.alternateTypesDirectory=C:\MWH\ORACLE~1\modules\oracle.oss
oiap_11.1.1,C:\MWH\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.ha
ndler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dbi.ora
cle.home=C:\MWH\Oracle_BI1 -DEPM_ORACLE_HOME=C:\MWH\Oracle_BI1 -Dweblogic.MaxMes
sageSize=50000000 -DEPM_ORACLE_HOME=C:\MWH\Oracle_BI1 -DHYPERION_HOME=C:\MWH\Ora
cle_BI1 -DEPM_ORACLE_INSTANCE=novalue -Dhyperion.home=C:\MWH\Oracle_BI1 -DEPM_RE
G_PROPERTIES_PATH=C:\MWH\USER_P~1\domains\BIFOUN~1\config\fmwconfig -Depm.useApp
licationContextId=false -Doracle.biee.search.bisearchproperties=C:\MWH\Oracle_BI
1\bifoundation\jee\BISearchConfig.properties -Dweblogic.management.clearTextCred
entialAccessEnabled=true -Doracle.notification.filewatching.interval=2000 -Dwebl
ogic.security.SSL.ignoreHostnameVerification=true -Dweblogic.security.SSL.enable
JSSE=true -Dfile.encoding=utf-8 -Doracle.ecsf.security.service=oracle.biee.searc
h.security.BISearchSecurityService -Doracle.ecsf.configuration.class=oracle.biee
.search.services.BISearchServiceConfiguration -Dxdo.server.config.dir=C:\MWH\use
r_projects\domains\bifoundation_domain\config\bipublisher -DXDO_FONT_DIR=C:\MWH\
Oracle_BI1\common\fonts -Drtd.instanceName=RTD_AdminServer -Dem.oracle.home=C:\
MWH\oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true
-Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false
-Dweblogic.ext.dirs=C:\MWH\patch_wls1035\profiles\default\sysext_manifest_classp
ath weblogic.Server
'C:\MWH\ORACLE~2\jdk\bin\java' is not recognized as an internal or external comm
and,
operable program or batch file.
C:\MWH>
I have installed OBIEE 11.1.1.6.0 version and Java version
java version "1.7.0_13"
Java(TM) SE Runtime Environment (build 1.7.0_13-b20)
Java HotSpot(TM) 64-Bit Server VM (build 23.7-b01, mixed mode)
Any suggestions ?? Where am I going wrong ??

faisalm wrote:
'C:\MWH\ORACLE~2\jdk\bin\java' is not recognized as an internal or external comm
and,
operable program or batch file.Check your environment variables and make sure your java/bin path is correct.
go to command prompt and type in SET PATH
C:\MWH\ORACLE~2\jdk should be java home
Make sure path is C:\MWH\ORACLE~2\jdk\bin;
HTH,
SVS

Starting OBIEE 11g

Hi,
I have installed OBIEE 11g. then i tried to login by following.
-> start BI services
-> entered the weblogic user name and password
-> then iam getting as wls.alive and keep blinking
It's not leading to login page.
Is there any error caused this? do we want to look in to enterprise manager?
how to come over this?
Thanks,
Satheesh

Are you sure you are running OBIEE 11g? YOu are meant to use those scripts any more in 11g. See this post:
Startup Scripts for OBIEE 11g on Linux

Starting OBIEE 11g services in Linux

Hi Gurus,
I have installed OBIEE 11g on Linux 32 bit machine, Procedure i used to follow to start the services, using putty:
1. Run ./startWeblogic.sh after it comes to running mode, it comes back to $
2. After it returns to $, i start nodeManager.sh
but now, after i do the first step from putty, though running mode has come, it is not coming back to $ where i can start the node manager, hence i am unable to start node manager from the $ console
Is this a server problem? pls help..
I did Ctrl+c and tried starting startWeblogic.sh again, but its again stopping at running mode and not returning to $
Kindly advice what can be done
Thanks,
Sree.

we had run the scripts using nohup "nohup ./startWeblogicServer.sh &" and reopened putty to run other nodemanager and opmnctl scripts, now everything has started and working fine.
Thanks all..

Unable to start OBIEE 11g services

Hi all,
I restored my Laptop to previous system timestamp. and Installed Bitdefender Internet security on top of my resoted system.
Before this process, I used to login into obiee Answers. After This restoring Process,when i start BI services, I am getting
this following error. unable see the login screen
Please advice me. how to handle this situation.
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
Thanks !!

Thank for the reply, I have been restarting my Biservices sevaral times !! Had been fightiing with this problem couple of days.
Does my Internet security can block the something related to BIserver / presentation services components ???
or How to check if I missed anything in restoration process ??, but I have been using OBIEE since a month. I resoted my mechine to couple of days back.
Thanks again.. !!

Error starting OBIEE 11G coreapplications after loading new RPD file in EM

Similar Messages

Maybe you are looking for