Error Starting Reports

I have Windows 98 and I am getting the following messages when I start up Reports 6i:
"RWBLD60.EXE -A device attached to the system is not fucntioning"
"The DE60.DLL file is linked to missing export UIW60.DLL:11044"
Can anyone help me with fixing this problem? Thanks!!!!

Hello,
181 views so far but no replies plz revert if u need any other info ..
for wersion of weblogic server and forms etc. i had given a link to my previous tthread. this is the same issue. only thing is i got rid of the original error for which i had started thread, but now i have end-up with this error.
still if anybory thinks that i should provide verision then below is additional info.
weblogic server version :-- 10.3.2
weblogic forms version :-- 11.1.1.2.0
OS platoform :-- OEL 5.3 and Fedora Core 13 ( Tried on Both)
another thing is when i go to /usr/lib/openmotif i can see file libXm.so.4
[oracle@localhost ~]$ cd /usr/lib/openmotif/
[oracle@localhost openmotif]$ ls -ltr
total 3312
-rwxr-xr-x 1 root root  434212 Apr  1 23:21 libUil.so.4.0.3
-rwxr-xr-x 1 root root  148972 Apr  1 23:21 libMrm.so.4.0.3
-rwxr-xr-x 1 root root 2799268 Apr  1 23:21 libXm.so.4.0.3
lrwxrwxrwx 1 root root      15 Sep 18 12:21 libMrm.so.4 -> libMrm.so.4.0.3
lrwxrwxrwx 1 root root      15 Sep 18 12:21 libUil.so.4 -> libUil.so.4.0.3
lrwxrwxrwx 1 root root      14 Sep 18 12:21 libXm.so.4 -> libXm.so.4.0.3
lrwxrwxrwx 1 root root      15 Sep 18 12:21 libUil.so -> libUil.so.4.0.3
lrwxrwxrwx 1 root root      15 Sep 18 12:21 libMrm.so -> libMrm.so.4.0.3
lrwxrwxrwx 1 root root      14 Sep 18 12:21 libXm.so -> libXm.so.4.0.3
[oracle@localhost openmotif]$ Thank You

Similar Messages

  • Error starting Report Builder 10.1.2.0.2

    Hi there,
    I can't start Report Builder 10.1.2.0.2 on Windows 2003 server properly, from any user other than administrator.
    It gives error rep:0118 Unable to create a temporary file
    Any input would be highly appreciated
    Thanks
    Nidhi
    Message was edited by:
    nj
    Message was edited by:
    nj

    You definitely have a problems with rights. It was installed by Administrator and the user you're trying to run it with doesn't have the rights to access those files. An easy solution should be to include your user in the administrator group. You can also, as administrator, give read/write priviledge to the Reports installation directory to anyone.
    Regards,
    Martin

  • Error Starting Report Server Services

    Hey all
    I have Install 9iAS it was working fine but When I Restart server mechine Report services unable to start
    Give error:-
    "Windows could not start the ORacle Reports Server [Rep60_ORA] on local Computer.
    for more information, review the system Event Log. If this is a non-Microsoft Service,
    Contact the service vendor, and refer to service-secific error code 186."
    See my report server log file:-
    E:\oracle\806\REPORT60\SERVER\Rep60_ORA.log.
    *** 2004-02-03 23:04:17 -- Server is starting up.
    *** 2004-02-04 03:58:49 -- Server started up an engine. (Rep60_ORA)
    *** 2004-02-04 04:28:57 -- Server shutting down an engine. (Rep60_ORA)
    *** 2004-02-04 04:45:00 -- Server is starting up.
    *** 2004-02-04 04:45:00 -- Daemon failed to listen to port
    *** 2004-02-04 04:55:55 -- Server is starting up.
    *** 2004-02-04 04:55:55 -- Daemon failed to listen to port
    *** 2004-02-04 04:58:46 -- Server is starting up.
    *** 2004-02-04 04:58:46 -- Daemon failed to listen to port
    *** 2004-02-04 15:53:35 -- Server is starting up.
    *** 2004-02-04 15:53:35 -- Daemon failed to listen to port
    Have anybady can solve this problem?
    Thanks

    I think your newly created report90 listens on the same port as your old rep60 service. Uninstall this service and install rep60 with a different port number or let reports 90 use a different port number

  • Error starting Reporting and Analysis Framework agent

    We are running Hyperion 11.1.1.4. We have been running fine; however, we stopped the agent yesterday (in our TEST environment) and when we tried restarting it we get an error: Failed to start agent service. What could be causing this error? We're running on RedHat Linux v5.3. When you try to login to Workspace and as expected, you get an error message.
    We are having this exact same issue in our DEV environment. Both DEV and TEST servers were powered down and moved in our data center over the weekend. I have confirmed that the IP address of the server has not changed.
    Any ideas you can give would be appreciated.
    Terri T.

    Look in Oracle/Middleware/user_projects/epmsystem1/diagnostics/logs/ReportingAnalysis
    specifically at stdout_console_default.log
    And at other files recently modified in that dir if you do not see anything.
    Post any relevant errors.
    you might just try to kill off everything and make sure there are no processes running.
    stop all services and assuming you are not root ,
    "kill -9 -1" will kill absolutely everything running with your user id, including your shell. Log back in and try to start.

  • XL Reporter Error - Error Starting Excel! Cause: (Retrieve Excel Interface)

    Hi all experts,
    My customer is running SAP B1 8.8 PL13, with MS Office 2003.
    One of the workstation is encountering XL Reporter error when trying to generate XL Reports.
    Error starting Excel! Cause: (Retrieve Excel Interface) Automation error
    Library not registered.
    I have tried checking the Excel Macro security setting, COM-Addins, changing Excel.exe.config file to use .NET Framework 1.1. But the error still persists.
    I have also tried uninstall SAP B1 client, remove SAP folder, the reinstall B1 client again, but the error still exist.
    Any other idea except reformatting PC?
    Thanks,
    Taw-Fey Tan

    Hi Julie,
    There seems to be 2 COM-Addins in Excel.
    SAP Business One
    SAP Business One  XL Reporter
    I am unable to delete the first one while keepint the second. Not sure why it keeps coming back and reappear itself.
    Taw-Fey Tan

  • Error starting XL reporter

    Hi All,
    I have recently upgraded my excel from 2003 to 2007. The excel reporter was working fine. After the upgrade when I am generating the reports the system shows an error
    An error occured during the process "Report Initialize" Description:666 error. Unable to get document
    Type 22
    Cause: Automation Error
    XL Reporter start up failed
    In the system message log I find the error messages
    Executing automatic Add-ons
    Failed to find local registration file for add-on
    Please suggest what to do? How to resolve this problem?
    Regards,
    Raj

    Hi Debraj,
    Please refer to note [892939 |https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMSZ3PTU4ODAwMDAr)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=892939].
    Re-installing XL Reporter should solve the issue.
    Please note if you are using SAP Business One 2007 you should proceed as follows,
    since from version 2007 the XL reporter is part of the core product:                                                                               
    1) Uninstall SAP Business One client.                              
    2) Install SAP Business One Client from your current patch level or from
    \\B1 Servername\b1_shr
    Let us know if you were successful.
    Kind regards
    Mario Schoenberg
    Senior Support Consultant
    SAP Business One Forums Team

  • Postscript report fail - REP-3000: Internal error starting Oracle toolkit

    Hi,
    I am receiving the error REP-3000: Internal error starting Oracle Toolkit when I am running a conc. program with postscript as output. I changed Active Users program and tested it. It failed.
    Metalink says DISPLAY issue. I ran the concurrent program - "Prints environment variable values" giving DISPLAY as variable. I received a value. like <hostname>:0.0
    What could be the issue?
    Release - 11.5.10.2
    OS -Linux
    Apache, Forms on 1 Node, Concurrent Manager on the second one.
    Database - 10g R2 on Unix.
    Thanks
    Cherrish Vaidiyan
    Edited by: Cherrish on Aug 19, 2010 5:01 PM

    Hi Hussein,
    Please find the complete concurrent program log:
    Application Object Library: Version : 11.5.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    FNDSCURS module: Active Users
    Current system time is 19-AUG-2010 15:34:33
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.WE8ISO8859P1
    REP-3000: Internal error starting Oracle Toolkit.
    REP-3000: Internal error starting Oracle Toolkit.
    Report Builder: Release 6.0.8.28.0 - Production on Thu Aug 19 15:34:33 2010
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 73686471.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 19-AUG-2010 15:34:46
    I will check the old forums too.
    Thanks

  • On start node ina cluster a have Error OSB-Reporting BEA-473500

    every time that I start my node in the cluster I have this error:
    <Error> <OSB-Reporting> <BEA-473500>
    I'm using Oracle Service Bus 11g
    what I should do to solve this?

    Hi Alex,
    I would suggest you to check with your network team because BEA-000109 error which points to the NIC card and the network issues.
    Ensure that no physical problems exist in your network:
    - Verify the network connection for each machine that hosts servers within the cluster.
    - Verify that all components of the network, including routers and DNS servers, are connected and functioning correctly.
    - Address conflicts within a network can disrupt multicast communications.
    - Use the netstat utility to verify that no other network resources are using the cluster multicast address.
    - Verify that each machine has a unique IP address.
    Workaround: Try using a different multicast address.
    Detail Information about the Error Code BEA-000109
    Error: An error occurred while sending multicast message:
    Description: An IO error occurred while trying to send a message over multicast.
    Cause: An error occurred while trying to send a message over multicast.
    Action :WebLogic Server will try to recover from this error. If the problem continues to persist, make sure that the network infrastructure and NIC are functioning properly.
    a) Suggest you to change the address and port to be certainly unique to have another try.
    Is your machine multihomed for managed server?
    b) If it is, try specifying Interface Address for each server.
    From admin console, you can go to the managed server -> Configuration -> Cluster ->
    Interface Address.
    Hope this helps.
    Thanks,
    Cris

  • Unable to Start Report Builder

    Hi,
    I am new to report server. After installing it I am able to start Report Manager, however when I click on Report Builder button in Report manager, I get the following dialog:
    Cannot download the aplication. The application is missing required files. Contact application vendor for assistance.
    When I press the 'Details' button, I get this (pasting here):
    PLATFORM VERSION INFO
     Windows    : 6.1.7601.65536 (Win32NT)
     Common Language Runtime  : 4.0.30319.18052
     System.Deployment.dll   : 4.0.30319.17929 built by: FX45RTMREL
     clr.dll    : 4.0.30319.18052 built by: FX45RTMGDR
     dfdll.dll    : 4.0.30319.17929 built by: FX45RTMREL
     dfshim.dll    : 4.0.41209.0 (Main.041209-0000)
    SOURCES
     Deployment url   :
    file:///C:/Users/Peter%20Battelino/Downloads/ReportBuilder_3_0_0_0%20(4).application
    IDENTITIES
     Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=11.0.2100.60, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
    APPLICATION SUMMARY
     * Online only application.
     * Trust url parameter is set.
    ERROR SUMMARY
     Below is a summary of the errors, details of these errors are listed later in the log.
     * Activation of C:\Users\Peter Battelino\Downloads\ReportBuilder_3_0_0_0 (4).application resulted in exception. Following failure messages were detected:
      + Downloading file:///C:/Users/Peter Battelino/Downloads/RptBuilder_3/MSReportBuilder.exe.manifest did not succeed.
      + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      + Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
    COMPONENT STORE TRANSACTION FAILURE SUMMARY
     No transaction error was detected.
    WARNINGS
     There were no warnings during this operation.
    OPERATION PROGRESS STATUS
     * [7/25/2013 9:31:36 AM] : Activation of C:\Users\Peter Battelino\Downloads\ReportBuilder_3_0_0_0 (4).application has started.
     * [7/25/2013 9:31:36 AM] : Processing of deployment manifest has successfully completed.
     * [7/25/2013 9:31:36 AM] : Installation of the application has started.
    ERROR DETAILS
     Following errors were detected during this operation.
     * [7/25/2013 9:31:36 AM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype)
      - Downloading file:///C:/Users/Peter Battelino/Downloads/RptBuilder_3/MSReportBuilder.exe.manifest did not succeed.
      - Source: System.Deployment
      - Stack trace:
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
       at System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
       at System.Deployment.Application.FileDownloader.Download(SubscriptionState subState)
       at System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri& sourceUri, String targetPath, IDownloadNotification notification, DownloadOptions options, ServerInformation& serverInformation)
       at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, IDownloadNotification notification, DownloadOptions options, Uri& appSourceUri, String&
    appManifestPath)
       at System.Deployment.Application.DownloadManager.DownloadApplicationManifest(AssemblyManifest deploymentManifest, String targetDir, Uri deploymentUri, Uri& appSourceUri, String& appManifestPath)
       at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
       at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
       at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
       at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
      --- Inner Exception ---
      System.Net.WebException
      - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      - Source: System
      - Stack trace:
       at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.FileWebRequest.GetResponse()
       at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
      --- Inner Exception ---
      System.Net.WebException
      - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      - Source: System
      - Stack trace:
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
       at System.Net.FileWebRequest.GetResponseCallback(Object state)
      --- Inner Exception ---
      System.IO.DirectoryNotFoundException
      - Could not find a part of the path 'C:\Users\Peter Battelino\Downloads\RptBuilder_3\MSReportBuilder.exe.manifest'.
      - Source: mscorlib
      - Stack trace:
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean
    useLongPath, Boolean checkHost)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
       at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, Boolean useAsync)
       at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
       at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
    COMPONENT STORE TRANSACTION DETAILS
     No transaction information is available.
    Does anybody know what the rpoble is?
    Thank you in advance.
    Peter Battelino
    BTE Corporation 
    PMBT

    Hi Pmbt,
    From your description, you cannot start Report Builder using Google Chrome, right? In Reporting Services, you use a Web browser to view reports and run Report Manager. Not all report functionality is supported by all browsers. Google Chrome is not a supported
    browser for SSRS. So we recommend you to start Report Builder using IE. For the detail information about it, please see:
    http://msdn.microsoft.com/en-us/library/ms156511(v=sql.105).aspx
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/f50eb196-3f15-408d-acb7-7f90e3348e3e/why-does-the-ssrs-calendar-control-not-work-in-google-chrome-but-plenty-of-other-websites-with
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    TechNet Community Support

  • Server Error in '/Report Manager' Application: System.IO.IOException: The file exists. When trying to export a completed report.

    I am using SQL Server 2005.  I run a report which runs and renders perfectly. But I am unable to export it into any format. It fails with the following error:
    Server Error in '/Reports' Application. 
    The file exists.
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.IO.IOException: The file exists.
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [IOException: The file exists.
    Microsoft.Reporting.WebForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension) +489
    Microsoft.Reporting.WebForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension) +924
    Microsoft.Reporting.WebForms.ServerReportControlSource.RenderReport(String format, String deviceInfo, NameValueCollection additionalParams, String& mimeType, String& fileExtension) +84
    Microsoft.Reporting.WebForms.ExportOperation.PerformOperation(NameValueCollection urlQuery, HttpResponse response) +153
    Microsoft.Reporting.WebForms.HttpHandler.ProcessRequest(HttpContext context) +75
    System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
    System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
    I have seen this question asked several years ago, but have never seen a response that suggests what the issue may be.
    I would really appreciate any help in resolving this problem.\
    The application has been running from quite some time and this problem started just recently.
    Thank You.
    -Rick

    Hi Rick,
    According to your description, the exception “System.IO.IOException: The file exists.” is thrown out when you export the report on report manager.
    Generally, the exception is thrown out because there are more than 65535 files without deleting previous temporary files in our temporary directory. Based on my research, it has reported the same issue when exporting the report on report manager, and deleting all
    temp files from C:\Windows\Temp could resolve the issue. I would also suggest you remove the temporary files from C:\Users\<username>\AppData\Local\Temp. Please refer to the first comment at this link:
    System.IO.IOException: The file exists
    Reference:
    Path.GetTempFileName Method
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • BI Publisher - PO_DISPATCH Error generating report output

    Hi everyone,
    Sorry for my bad english... having said that...
    I need to modify the Purchase Order print. First, I wanted to see the standard version to get an idea of how much different it was. Well, I don't know because it doesn't work.
    Error:
    Error generating report output: (235,2309)
    Error occurred during the process of generating the output file from template file, XML data file, and translation XLIFF file.
    I know there are several topics on the web, but all of them are about new or custom reports, this is a standard one. When I preview the report on the report definition it works fine, so I assume there's a problem with the XML file generated. When I preview the report specifying an alternative XML I get the same error. The XML file I choose was the one generated by PeopleSoft when trying to view the printable version of the PO online.
    So, I start cutting portions of the XML File. I started leaving only de Header Data and it works OK, when I add the Lines it failed. I add the Line Fields one by one to detect what was the problem... And finally it failed when I add AMT_LINE_MAX. Why? No idea, is it because its value is '0,000' instead of '0.000'? I don't think that should be the problem since there are other numeric fields on the header, all with ',' as a decimal separator...
    Am I missing some configuration?
    Thanks in advance.
    Regards,
    Veronica.

    Have a look at the following doc:
    "Error generating report output. (235,2309)" When Running the "PO XMLP Dispatch" XML Publisher Report (PO_DISPATCH) for a Purchase Order with a Ship To Location with Special Characters in the Address [ID 1299876.1]
    https://support.oracle.com/epmos/faces/DocContentDisplay?id=1299876.1
    Stating this happens for example when there is a location with special characters.

  • Re: BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns

    Hello Everyone.
    I've run into something quite strange and am hoping you can help me.
    I am using Apex 4.0.1 and Oracle version 10.2.0.5. I've created a "classical" report in which the underlying SQL is a very simple:
    select * from pvtabThe Oracle table pvtab consists of 419 columns, all of which are varchar2(88) and number type. That's it.
    When I run the report, al of the columns show up as expected.
    However, when I go into the "Report Attributes" tab and click on one of the fields (any of them, it doesn't matter which one), I immediately get the following error:
    ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "598CAA7B68746A66F4B99E1512C36DED" application checksum = "0"If if replace the "*" with a few actual column names, then I am able to access any of these columns without problem.
    If I put back the "*", I then encounter this error again.
    I have never seen this error with other SQL SELECT statements in which I use the "*" qualifier to retrieve all columns from the table.
    And so, I am wondering if the error is caused because of the large number of columns (419) in my table.
    I've seen this same error mentioned in connection with forms but never with a report.
    So, is there some limit to the number of columns one can have in a "classic" or interactive report?
    Any idea why I would be getting this error?
    Here is the DDL for my table pvtab:
    CREATE TABLE  "PVTAB"
       (     "MICRO" VARCHAR2(4),
         "PRIM" VARCHAR2(4),
         "UNIT" NUMBER,
         "SEC_REF_1" NUMBER,
         "SECN_1" VARCHAR2(88),
         "SEC_REF_2" NUMBER,
         "SECN_2" VARCHAR2(88),
         "SEC_REF_3" NUMBER,
         "SECN_3" VARCHAR2(88),
         "SEC_REF_4" NUMBER,
         "SECN_4" VARCHAR2(88),
         "SEC_REF_5" NUMBER,
         "SECN_5" VARCHAR2(88),
         "SEC_REF_6" NUMBER,
         "SECN_6" VARCHAR2(88),
         "SEC_REF_7" NUMBER,
         "SECN_7" VARCHAR2(88),
         "SEC_REF_8" NUMBER,
         "SECN_8" VARCHAR2(88),
         "SEC_REF_9" NUMBER,
         "SECN_9" VARCHAR2(88),
         "SEC_REF_10" NUMBER,
         "SECN_10" VARCHAR2(88),
         "SEC_REF_11" NUMBER,
         "SECN_11" VARCHAR2(88),
         "SEC_REF_12" NUMBER,
         "SECN_12" VARCHAR2(88),
         "SEC_REF_13" NUMBER,
         "SECN_13" VARCHAR2(88),
         "SEC_REF_14" NUMBER,
         "SECN_14" VARCHAR2(88),
         "SEC_REF_15" NUMBER,
         "SECN_15" VARCHAR2(88),
         "SEC_REF_16" NUMBER,
         "SECN_16" VARCHAR2(88),
         "SEC_REF_17" NUMBER,
         "SECN_17" VARCHAR2(88),
         "SEC_REF_18" NUMBER,
         "SECN_18" VARCHAR2(88),
         "SEC_REF_19" NUMBER,
         "SECN_19" VARCHAR2(88),
         "SEC_REF_20" NUMBER,
         "SECN_20" VARCHAR2(88),
         "SEC_REF_21" NUMBER,
         "SECN_21" VARCHAR2(88),
         "SEC_REF_22" NUMBER,
         "SECN_22" VARCHAR2(88),
         "SEC_REF_23" NUMBER,
         "SECN_23" VARCHAR2(88),
         "SEC_REF_24" NUMBER,
         "SECN_24" VARCHAR2(88),
         "SEC_REF_25" NUMBER,
         "SECN_25" VARCHAR2(88),
         "SEC_REF_26" NUMBER,
         "SECN_26" VARCHAR2(88),
         "SEC_REF_27" NUMBER,
         "SECN_27" VARCHAR2(88),
         "SEC_REF_28" NUMBER,
         "SECN_28" VARCHAR2(88),
         "SEC_REF_29" NUMBER,
         "SECN_29" VARCHAR2(88),
         "SEC_REF_30" NUMBER,
         "SECN_30" VARCHAR2(88),
         "SEC_REF_31" NUMBER,
         "SECN_31" VARCHAR2(88),
         "SEC_REF_32" NUMBER,
         "SECN_32" VARCHAR2(88),
         "SEC_REF_33" NUMBER,
         "SECN_33" VARCHAR2(88),
         "SEC_REF_34" NUMBER,
         "SECN_34" VARCHAR2(88),
         "SEC_REF_35" NUMBER,
         "SECN_35" VARCHAR2(88),
         "SEC_REF_36" NUMBER,
         "SECN_36" VARCHAR2(88),
         "SEC_REF_37" NUMBER,
         "SECN_37" VARCHAR2(88),
         "SEC_REF_38" NUMBER,
         "SECN_38" VARCHAR2(88),
         "SEC_REF_39" NUMBER,
         "SECN_39" VARCHAR2(88),
         "SEC_REF_40" NUMBER,
         "SECN_40" VARCHAR2(88),
         "SEC_REF_41" NUMBER,
         "SECN_41" VARCHAR2(88),
         "SEC_REF_42" NUMBER,
         "SECN_42" VARCHAR2(88),
         "SEC_REF_43" NUMBER,
         "SECN_43" VARCHAR2(88),
         "SEC_REF_44" NUMBER,
         "SECN_44" VARCHAR2(88),
         "SEC_REF_45" NUMBER,
         "SECN_45" VARCHAR2(88),
         "SEC_REF_46" NUMBER,
         "SECN_46" VARCHAR2(88),
         "SEC_REF_47" NUMBER,
         "SECN_47" VARCHAR2(88),
         "SEC_REF_48" NUMBER,
         "SECN_48" VARCHAR2(88),
         "SEC_REF_49" NUMBER,
         "SECN_49" VARCHAR2(88),
         "SEC_REF_50" NUMBER,
         "SECN_50" VARCHAR2(88),
         "SEC_REF_51" NUMBER,
         "SECN_51" VARCHAR2(88),
         "SEC_REF_52" NUMBER,
         "SECN_52" VARCHAR2(88),
         "SEC_REF_53" NUMBER,
         "SECN_53" VARCHAR2(88),
         "SEC_REF_54" NUMBER,
         "SECN_54" VARCHAR2(88),
         "SEC_REF_55" NUMBER,
         "SECN_55" VARCHAR2(88),
         "SEC_REF_56" NUMBER,
         "SECN_56" VARCHAR2(88),
         "SEC_REF_57" NUMBER,
         "SECN_57" VARCHAR2(88),
         "SEC_REF_58" NUMBER,
         "SECN_58" VARCHAR2(88),
         "SEC_REF_59" NUMBER,
         "SECN_59" VARCHAR2(88),
         "SEC_REF_60" NUMBER,
         "SECN_60" VARCHAR2(88),
         "SEC_REF_61" NUMBER,
         "SECN_61" VARCHAR2(88),
         "SEC_REF_62" NUMBER,
         "SECN_62" VARCHAR2(88),
         "SEC_REF_63" NUMBER,
         "SECN_63" VARCHAR2(88),
         "SEC_REF_64" NUMBER,
         "SECN_64" VARCHAR2(88),
         "SEC_REF_65" NUMBER,
         "SECN_65" VARCHAR2(88),
         "SEC_REF_66" NUMBER,
         "SECN_66" VARCHAR2(88),
         "SEC_REF_67" NUMBER,
         "SECN_67" VARCHAR2(88),
         "SEC_REF_68" NUMBER,
         "SECN_68" VARCHAR2(88),
         "SEC_REF_69" NUMBER,
         "SECN_69" VARCHAR2(88),
         "SEC_REF_70" NUMBER,
         "SECN_70" VARCHAR2(88),
         "SEC_REF_71" NUMBER,
         "SECN_71" VARCHAR2(88),
         "SEC_REF_72" NUMBER,
         "SECN_72" VARCHAR2(88),
         "SEC_REF_73" NUMBER,
         "SECN_73" VARCHAR2(88),
         "SEC_REF_74" NUMBER,
         "SECN_74" VARCHAR2(88),
         "SEC_REF_75" NUMBER,
         "SECN_75" VARCHAR2(88),
         "SEC_REF_76" NUMBER,
         "SECN_76" VARCHAR2(88),
         "SEC_REF_77" NUMBER,
         "SECN_77" VARCHAR2(88),
         "SEC_REF_78" NUMBER,
         "SECN_78" VARCHAR2(88),
         "SEC_REF_79" NUMBER,
         "SECN_79" VARCHAR2(88),
         "SEC_REF_80" NUMBER,
         "SECN_80" VARCHAR2(88),
         "SEC_REF_81" NUMBER,
         "SECN_81" VARCHAR2(88),
         "SEC_REF_82" NUMBER,
         "SECN_82" VARCHAR2(88),
         "SEC_REF_83" NUMBER,
         "SECN_83" VARCHAR2(88),
         "SEC_REF_84" NUMBER,
         "SECN_84" VARCHAR2(88),
         "SEC_REF_85" NUMBER,
         "SECN_85" VARCHAR2(88),
         "SEC_REF_86" NUMBER,
         "SECN_86" VARCHAR2(88),
         "SEC_REF_87" NUMBER,
         "SECN_87" VARCHAR2(88),
         "SEC_REF_88" NUMBER,
         "SECN_88" VARCHAR2(88),
         "SEC_REF_89" NUMBER,
         "SECN_89" VARCHAR2(88),
         "SEC_REF_90" NUMBER,
         "SECN_90" VARCHAR2(88),
         "SEC_REF_91" NUMBER,
         "SECN_91" VARCHAR2(88),
         "SEC_REF_92" NUMBER,
         "SECN_92" VARCHAR2(88),
         "SEC_REF_93" NUMBER,
         "SECN_93" VARCHAR2(88),
         "SEC_REF_94" NUMBER,
         "SECN_94" VARCHAR2(88),
         "SEC_REF_95" NUMBER,
         "SECN_95" VARCHAR2(88),
         "SEC_REF_96" NUMBER,
         "SECN_96" VARCHAR2(88),
         "SEC_REF_97" NUMBER,
         "SECN_97" VARCHAR2(88),
         "SEC_REF_98" NUMBER,
         "SECN_98" VARCHAR2(88),
         "SEC_REF_99" NUMBER,
         "SECN_99" VARCHAR2(88),
         "SEC_REF_100" NUMBER,
         "SECN_100" VARCHAR2(88),
         "SEC_REF_101" NUMBER,
         "SECN_101" VARCHAR2(88),
         "SEC_REF_102" NUMBER,
         "SECN_102" VARCHAR2(88),
         "SEC_REF_103" NUMBER,
         "SECN_103" VARCHAR2(88),
         "SEC_REF_104" NUMBER,
         "SECN_104" VARCHAR2(88),
         "SEC_REF_105" NUMBER,
         "SECN_105" VARCHAR2(88),
         "SEC_REF_106" NUMBER,
         "SECN_106" VARCHAR2(88),
         "SEC_REF_107" NUMBER,
         "SECN_107" VARCHAR2(88),
         "SEC_REF_108" NUMBER,
         "SECN_108" VARCHAR2(88),
         "SEC_REF_109" NUMBER,
         "SECN_109" VARCHAR2(88),
         "SEC_REF_110" NUMBER,
         "SECN_110" VARCHAR2(88),
         "SEC_REF_111" NUMBER,
         "SECN_111" VARCHAR2(88),
         "SEC_REF_112" NUMBER,
         "SECN_112" VARCHAR2(88),
         "SEC_REF_113" NUMBER,
         "SECN_113" VARCHAR2(88),
         "SEC_REF_114" NUMBER,
         "SECN_114" VARCHAR2(88),
         "SEC_REF_115" NUMBER,
         "SECN_115" VARCHAR2(88),
         "SEC_REF_116" NUMBER,
         "SECN_116" VARCHAR2(88),
         "SEC_REF_117" NUMBER,
         "SECN_117" VARCHAR2(88),
         "SEC_REF_118" NUMBER,
         "SECN_118" VARCHAR2(88),
         "SEC_REF_119" NUMBER,
         "SECN_119" VARCHAR2(88),
         "SEC_REF_120" NUMBER,
         "SECN_120" VARCHAR2(88),
         "SEC_REF_121" NUMBER,
         "SECN_121" VARCHAR2(88),
         "SEC_REF_122" NUMBER,
         "SECN_122" VARCHAR2(88),
         "SEC_REF_123" NUMBER,
         "SECN_123" VARCHAR2(88),
         "SEC_REF_124" NUMBER,
         "SECN_124" VARCHAR2(88),
         "SEC_REF_125" NUMBER,
         "SECN_125" VARCHAR2(88),
         "SEC_REF_126" NUMBER,
         "SECN_126" VARCHAR2(88),
         "SEC_REF_127" NUMBER,
         "SECN_127" VARCHAR2(88),
         "SEC_REF_128" NUMBER,
         "SECN_128" VARCHAR2(88),
         "SEC_REF_129" NUMBER,
         "SECN_129" VARCHAR2(88),
         "SEC_REF_130" NUMBER,
         "SECN_130" VARCHAR2(88),
         "SEC_REF_131" NUMBER,
         "SECN_131" VARCHAR2(88),
         "SEC_REF_132" NUMBER,
         "SECN_132" VARCHAR2(88),
         "SEC_REF_133" NUMBER,
         "SECN_133" VARCHAR2(88),
         "SEC_REF_134" NUMBER,
         "SECN_134" VARCHAR2(88),
         "SEC_REF_135" NUMBER,
         "SECN_135" VARCHAR2(88),
         "SEC_REF_136" NUMBER,
         "SECN_136" VARCHAR2(88),
         "SEC_REF_137" NUMBER,
         "SECN_137" VARCHAR2(88),
         "SEC_REF_138" NUMBER,
         "SECN_138" VARCHAR2(88),
         "SEC_REF_139" NUMBER,
         "SECN_139" VARCHAR2(88),
         "SEC_REF_140" NUMBER,
         "SECN_140" VARCHAR2(88),
         "SEC_REF_141" NUMBER,
         "SECN_141" VARCHAR2(88),
         "SEC_REF_142" NUMBER,
         "SECN_142" VARCHAR2(88),
         "SEC_REF_143" NUMBER,
         "SECN_143" VARCHAR2(88),
         "SEC_REF_144" NUMBER,
         "SECN_144" VARCHAR2(88),
         "SEC_REF_145" NUMBER,
         "SECN_145" VARCHAR2(88),
         "SEC_REF_146" NUMBER,
         "SECN_146" VARCHAR2(88),
         "SEC_REF_147" NUMBER,
         "SECN_147" VARCHAR2(88),
         "SEC_REF_148" NUMBER,
         "SECN_148" VARCHAR2(88),
         "SEC_REF_149" NUMBER,
         "SECN_149" VARCHAR2(88),
         "SEC_REF_150" NUMBER,
         "SECN_150" VARCHAR2(88),
         "SEC_REF_151" NUMBER,
         "SECN_151" VARCHAR2(88),
         "SEC_REF_152" NUMBER,
         "SECN_152" VARCHAR2(88),
         "SEC_REF_153" NUMBER,
         "SECN_153" VARCHAR2(88),
         "SEC_REF_154" NUMBER,
         "SECN_154" VARCHAR2(88),
         "SEC_REF_155" NUMBER,
         "SECN_155" VARCHAR2(88),
         "SEC_REF_156" NUMBER,
         "SECN_156" VARCHAR2(88),
         "SEC_REF_157" NUMBER,
         "SECN_157" VARCHAR2(88),
         "SEC_REF_158" NUMBER,
         "SECN_158" VARCHAR2(88),
         "SEC_REF_159" NUMBER,
         "SECN_159" VARCHAR2(88),
         "SEC_REF_160" NUMBER,
         "SECN_160" VARCHAR2(88),
         "SEC_REF_161" NUMBER,
         "SECN_161" VARCHAR2(88),
         "SEC_REF_162" NUMBER,
         "SECN_162" VARCHAR2(88),
         "SEC_REF_163" NUMBER,
         "SECN_163" VARCHAR2(88),
         "SEC_REF_164" NUMBER,
         "SECN_164" VARCHAR2(88),
         "SEC_REF_165" NUMBER,
         "SECN_165" VARCHAR2(88),
         "SEC_REF_166" NUMBER,
         "SECN_166" VARCHAR2(88),
         "SEC_REF_167" NUMBER,
         "SECN_167" VARCHAR2(88),
         "SEC_REF_168" NUMBER,
         "SECN_168" VARCHAR2(88),
         "SEC_REF_169" NUMBER,
         "SECN_169" VARCHAR2(88),
         "SEC_REF_170" NUMBER,
         "SECN_170" VARCHAR2(88),
         "SEC_REF_171" NUMBER,
         "SECN_171" VARCHAR2(88),
         "SEC_REF_172" NUMBER,
         "SECN_172" VARCHAR2(88),
         "SEC_REF_173" NUMBER,
         "SECN_173" VARCHAR2(88),
         "SEC_REF_174" NUMBER,
         "SECN_174" VARCHAR2(88),
         "SEC_REF_175" NUMBER,
         "SECN_175" VARCHAR2(88),
         "SEC_REF_176" NUMBER,
         "SECN_176" VARCHAR2(88),
         "SEC_REF_177" NUMBER,
         "SECN_177" VARCHAR2(88),
         "SEC_REF_178" NUMBER,
         "SECN_178" VARCHAR2(88),
         "SEC_REF_179" NUMBER,
         "SECN_179" VARCHAR2(88),
         "SEC_REF_180" NUMBER,
         "SECN_180" VARCHAR2(88),
         "SEC_REF_181" NUMBER,
         "SECN_181" VARCHAR2(88),
         "SEC_REF_182" NUMBER,
         "SECN_182" VARCHAR2(88),
         "SEC_REF_183" NUMBER,
         "SECN_183" VARCHAR2(88),
         "SEC_REF_184" NUMBER,
         "SECN_184" VARCHAR2(88),
         "SEC_REF_185" NUMBER,
         "SECN_185" VARCHAR2(88),
         "SEC_REF_186" NUMBER,
         "SECN_186" VARCHAR2(88),
         "SEC_REF_187" NUMBER,
         "SECN_187" VARCHAR2(88),
         "SEC_REF_188" NUMBER,
         "SECN_188" VARCHAR2(88),
         "SEC_REF_189" NUMBER,
         "SECN_189" VARCHAR2(88),
         "SEC_REF_190" NUMBER,
         "SECN_190" VARCHAR2(88),
         "SEC_REF_191" NUMBER,
         "SECN_191" VARCHAR2(88),
         "SEC_REF_192" NUMBER,
         "SECN_192" VARCHAR2(88),
         "SEC_REF_193" NUMBER,
         "SECN_193" VARCHAR2(88),
         "SEC_REF_194" NUMBER,
         "SECN_194" VARCHAR2(88),
         "SEC_REF_195" NUMBER,
         "SECN_195" VARCHAR2(88),
         "SEC_REF_196" NUMBER,
         "SECN_196" VARCHAR2(88),
         "SEC_REF_197" NUMBER,
         "SECN_197" VARCHAR2(88),
         "SEC_REF_198" NUMBER,
         "SECN_198" VARCHAR2(88),
         "SEC_REF_199" NUMBER,
         "SECN_199" VARCHAR2(88),
         "SEC_REF_200" NUMBER,
         "SECN_200" VARCHAR2(88),
         "SEC_REF_201" NUMBER,
         "SECN_201" VARCHAR2(88),
         "SEC_REF_202" NUMBER,
         "SECN_202" VARCHAR2(88),
         "SEC_REF_203" NUMBER,
         "SECN_203" VARCHAR2(88),
         "SEC_REF_204" NUMBER,
         "SECN_204" VARCHAR2(88),
         "SEC_REF_205" NUMBER,
         "SECN_205" VARCHAR2(88),
         "SEC_REF_206" NUMBER,
         "SECN_206" VARCHAR2(88),
         "SEC_REF_207" NUMBER,
         "SECN_207" VARCHAR2(88),
         "SEC_REF_208" NUMBER,
         "SECN_208" VARCHAR2(88)
       );Thank you for any help/advice.
    Elie
    Edited by: EEG on Jun 12, 2011 2:09 PM

    So, is there some limit to the number of columns one can have in a "classic" or interactive report?Yes. See Oracle® Application Express Application Builder User's Guide Release 4.0, Appendix B: Oracle Application Express Limits.
    Any idea why I would be getting this error?No, but I've replicated it in APEX 4.0.2.00.07 on 11.2.0.1.0 EE using a table of 420 <tt>varchar2(88)</tt> columns:
    >
    ORA-20503: Current version of data in database has changed since user initiated update process. current checksum = "50C9BDC0AA1AEF0EB272E9158B2117B4" application checksum = "0"
    >
    Happens whether using <tt>select *</tt> or including all column names in the query. (I know you don't want to type all the column names, but I'd never use <tt>select *</tt> in a production application: always use a proper column list. You can get one without typing by drag-and-drop of a table in most IDEs, or a query from <tt>user_tab_columns</tt>.)
    I hit the problem at 274 columns. Such an arbitrary number leads me to think that the problem is not one of the number of columns per se, but is due to some other limit (possibly a 32K VARCHAR2/RAW buffer somewhere).
    Workaround:
    Updates to the report column attributes are actually being saved, and you can navigate them using the Page Definition tree view as described in Appendix B.
    Getting More Help:
    This is probably a bug. If you have a support agreement with Oracle raise an SR with Oracle Support.
    Also:
    <li>Search the forum using the "ORA-20503" code and other possible terms to see if there's anything relevant. I had a quick look but the only thread in this context recommended an upgrade on an Oracle 9 DB version that's not compatible with APEX 4.0.
    <li>To get the attention of the Oracle APEX team or anyone else who may know more about this problem than we do, edit your original post and change the Subject to be more specific about the actual nature of the problem: <em>BUG? APEX 4.0: ORA-20503 error editing report with 400+ columns</em>, and include your database version/edition and the definition of the <tt>PVTAB</tt> table.
    Finally:
    Somebody's bound to ask, so we might as well get started:
    <li>Why so many columns?
    <li>What requirement is this trying to fulfil?

  • Error starting DBConsole. DBConsole could not be started successfully

    Hello All.
    How to fix the following failure on Windows XP SP2.
    Oracle application server 10g release 2 (1.2.0.2)
    1-SEVERE: Error starting DBConsole. DBConsole could not be started successfully
    2-Configuration assistant "Single Sign-On Configuration Assistant" failed
    ================================================================================================================
    Output generated from configuration assistant "Oracle Database Configuration Assistant":
    Mar 31, 2006 1:33:03 PM oracle.sysman.emcp.EMConfig updateReposVars
    INFO: Updating file C:\oracle\infra10g1202\sysman\emdrep\config\repository.variables ...
    Mar 31, 2006 1:33:18 PM oracle.sysman.emcp.EMConfig addPortEntries
    INFO: Updating file C:\oracle\infra10g1202\install\portlist.ini ...
    Mar 31, 2006 1:33:18 PM oracle.sysman.emcp.EMConfig updateEmdProps
    INFO: Updating file C:\oracle\infra10g1202\sysman\config\emd.properties ...
    Mar 31, 2006 1:33:20 PM oracle.sysman.emcp.EMConfig updateConfigFiles
    INFO: targets.xml file is updated successfully
    Mar 31, 2006 1:33:20 PM oracle.sysman.emcp.EMConfig updateEmomsProps
    INFO: Updating file C:\oracle\infra10g1202\sysman\config\emoms.properties ...
    Mar 31, 2006 1:33:21 PM oracle.sysman.emcp.EMConfig updateConfigFiles
    INFO: emoms.properties file is updated successfully
    Mar 31, 2006 1:33:37 PM oracle.sysman.emcp.EMConfig copyOC4JDir
    WARNING: Error copying OC4J config files from C:\oracle\infra10g1202\oc4j\j2ee\OC4J_DBConsole to C:\oracle\infra10g1202\oc4j\j2ee\OC4J_DBConsole_srdb-pc05.tamer.com_as10gdb
    Mar 31, 2006 1:33:37 PM oracle.sysman.emcp.EMConfig startOMS
    INFO: Starting the DBConsole ...
    Mar 31, 2006 1:38:38 PM oracle.sysman.emcp.EMConfig perform
    SEVERE: Error starting DBConsole. DBConsole could not be started successfully
    Configuration assistant "Oracle Database Configuration Assistant" succeeded
    ================================================================================================================
    Output generated from configuration assistant "Single Sign-On Configuration Assistant":
    Parameters passed to ssoca : param0:config param1:C:\oracle\infra10g1202 param2:cn=orcladmin param3:***** param4:AMERICAN_AMERICA.WE8MSWIN1252 param5:http param6:srdb-pc05.tamer.com param7:7777 param8:en
    Fri Mar 31 13:45:16 EST 2006
    Parameters received by ssoca : param0:config param1:C:\oracle\infra10g1202 param2:cn=orcladmin param3:***** param4:AMERICAN_AMERICA.WE8MSWIN1252 param5:http param6:srdb-pc05.tamer.com param7:7777 param8:en
    Content of ssoca config file is :
    -- listing properties --
    config_sso_oid=true
    config_lang=true
    config_sso_seed=true
    config_targets_xml=true
    config_ssoupg=true
    config_dad=true
    config_em_integ=true
    ACTION by SSOConfigAssistant :
    C:\oracle\infra10g1202\bin\sqlplus orasso/*****@"cn=as10gdb,cn=oraclecontext"
    @C:\oracle\infra10g1202\sso\admin\plsql\sso\ssoseedi.sql http srdb-pc05.tamer.com 777
    SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 31 14:45:19 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> Connected.
    SQL> SQL> exit;
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
    With the Partitioning, OLAP and Data Mining options
    ACTION by SSOConfigAssistant :
    C:\oracle\infra10g1202\bin\sqlplus orasso/*****@"cn=as10gdb,cn=oraclecontext"
    @C:\oracle\infra10g1202\sso\admin\plsql\sso\ssooidd.sql srdb-pc05.tamer.com 636 "cn=orcladmin" ***** Y
    SQL*Plus: Release 10.1.0.4.2 - Production on Fri Mar 31 14:45:24 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> Connected.
    SQL> Creating OID entries for SSO
    Error code : 1
    Error message: User-Defined Exception
    LDAP error : 28862: UnKnown Error Encountered
    ERROR: deleting application entry
    Error code: 1
    Error message: User-Defined Exception
    ERROR: creating SSO users and groups in OID
    PL/SQL procedure successfully completed.
    *** Refreshing WWC OID cache....***
    declare
    ERROR at line 1:
    ORA-06510: PL/SQL: unhandled user-defined exception
    ORA-06512: at "ORASSO.WWSEC_OID", line 1199
    ORA-06512: at "ORASSO.WWSEC_OID", line 1328
    ORA-06512: at "ORASSO.WWSEC_OID", line 2498
    ORA-06512: at "ORASSO.WWSEC_OID", line 2528
    ORA-06512: at "ORASSO.WWSEC_OID", line 1606
    ORA-06512: at "ORASSO.WWSEC_OID", line 1755
    ORA-06512: at "ORASSO.WWSEC_OID", line 2133
    ORA-06512: at line 8
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 - Production
    With the Partitioning, OLAP and Data Mining options
    ERROR : Exception while configing SSO DAD :
    java.sql.SQLException: Io exception: JNDI Package failurejavax.naming.CommunicationException: Request: 1 cancelled
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
         at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
         at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
         at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
         at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
         at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
         at java.sql.DriverManager.getConnection(DriverManager.java:512)
         at java.sql.DriverManager.getConnection(DriverManager.java:171)
         at oracle.security.sso.SSOConfigAssistant.configDAD(SSOConfigAssistant.java:1473)
         at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1270)
         at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
    Please fix the error reported in the stack trace above and re-run SSO Config Tool.
    Repository API Raised Exception : oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://srdb-pc05.tamer.com:389/. Base Exception : javax.naming.CommunicationException: simple bind failed: srdb-pc05.tamer.com:389 [Root exception is java.net.SocketException: Socket closed]
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://srdb-pc05.tamer.com:389/. Base Exception : javax.naming.CommunicationException: simple bind failed: srdb-pc05.tamer.com:389 [Root exception is java.net.SocketException: Socket closed]
         at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
         at oracle.ias.repository.IASSchema.getColocatedDBConnect(IASSchema.java:657)
         at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:767)
         at oracle.ias.repository.SchemaManager.getDBConnect(SchemaManager.java:406)
         at oracle.security.sso.SSOConfigAssistant.configTargetsXML(SSOConfigAssistant.java:1847)
         at oracle.security.sso.SSOConfigAssistant.updateTargetsXML(SSOConfigAssistant.java:1786)
         at oracle.security.sso.SSOConfigAssistant.ssoConfig(SSOConfigAssistant.java:1280)
         at oracle.security.sso.SSOConfigAssistant.main(SSOConfigAssistant.java:217)
    Please fix the error reported in the stack trace above and re-run SSO Config Tool.
    Setting the AS product version value in targets.xml to be "10.1.2.0.2".
    Calling method getASTargetInfo.
    getASTargetInfo: oracleHome = "C:\oracle\infra10g1202".
    getASTargetInfo: iasName = "infra10g1202.srdb-pc05.tamer.com".
    getASTargetInfo: iAS Target Type = "oracle_ias".
    getASTargetInfo: StatusURL value = "http://srdb-pc05.tamer.com:7777".
    Retrieved SSO protocol, host, and port info from targets.xml.
    The values are: "http://srdb-pc05.tamer.com:7777".
    The following values will be used to configure the sso_server target entry in targets.xml.
    Protocol: "http".
    Hostname: "srdb-pc05.tamer.com".
    Port: "7777".
    C:\oracle\infra10g1202\jdk\bin\java
    -cp
    C:\oracle\infra10g1202\lib\xmlparserv2.jar;C:\oracle\infra10g1202\sysman\webapps\emd\WEB-INF\lib\emd.jar;C:\oracle\infra10g1202\sysman\webapps\emd\WEB-INF\lib\log4j-core.jar;C:\oracle\infra10g1202\lib\emSDK.jar
    -DORACLE_HOME=C:\oracle\infra10g1202
    oracle.sysman.emSDK.conf.TargetInstaller
    addtarget
    C:\oracle\infra10g1202\sso\sso_server_target2add.xml
    Configuring SSO languages with the following language code:
    us
    Language us is already installed.
    About to execute java call using emConfigInstall.jar.
    Here are the arguments:
    C:\oracle\infra10g1202\jdk\bin\java
    -DORACLE_HOME=C:\oracle\infra10g1202
    -jar
    C:\oracle\infra10g1202\jlib\emConfigInstall.jar
    consolesn
    C:\oracle\infra10g1202\sso\conf\consoleConfigSNSegment.xml
    Finished executing the call.
    Child Process has exited.
    SSO Configuration Assistant failed.
    Configuration assistant "Single Sign-On Configuration Assistant" failed

    I am getting a similar error in iAS 10g R2 on Windows 2003 64-bit. Did you solve your problem? Am I better off using Windows 2003 32-bit instead?
    Edited by: jkrich on Apr 7, 2011 8:33 PM

  • Partition Failed Partition failed with the error: POSIX reports: The operation couldn't be completed. CAN NOT ALLOCATE MEMORY

    I plug usb mass storage device to my macbook pro i7 than every thing is stack and i reinforce to shutdown and than I start again but mac fail to boot again.
    I tried different optiones in disk utility in mac os startup disk. but still fail to repair, erase and partition. I try to fix with the steps listed in
    https://discussions.apple.com/message/13288923#13288923
    but it fail to partition with the msg:
    Partition Failed
         Partition failed with the error: POSIX reports: The operation couldn’t be completed.cannot allocate memory
    pls pls pls help urgentely on this matter I stop working.
    Kind Regards,
    pe

    Hi again OGELTHORPE.
    I've already run two hardware tests. One quick one and one extended one. It was unable to pick anything up.
    It's like everything is running perfectly, but when I go to erase the HDD or partition it, it pops up with the error message. Even when I try to erase and partition using "Terminal", I received the same error message.
    It's beginning to do my head in, but will see if replacing the SATA cable will make any difference. If it doesn't, I'll hazard a guess it could be the Logic Board.
    Thanks again for your suggestions!
    L.

  • Encountering XML-20108: (Fatal Error) Start of root element expected

    Hi,
    We are trying to invoke a XML Publisher report from a custom OAF page using API's. However, it is erroring out with the following error message (in xdo.log)
    [021710_121811671][oracle.apps.xdo.common.xml.XSLTWrapper][EXCEPTION] XSL error:
    <Line 1, Column 1>: XML-20108: (Fatal Error) Start of root element expected.
    [021710_121811672][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
    [021710_121811672][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
    [021710_121811673][][EXCEPTION] java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.apps.xdo.common.xml.XSLT10gR1.invokeParse(XSLT10gR1.java:517)
    at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:224)
    at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
    at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
    at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
    at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
    at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
    at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at lxe.oracle.apps.ibu.returnmgmt.server.RmaCreateReturnAMImpl.xxPrintShipLabel(RmaCreateReturnAMImpl.java:1046)
    at lxe.oracle.apps.ibu.returnmgmt.webui.OrderConfirmCo.processFormRequest(OrderConfirmCo.java:167)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:815)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:382)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:815)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:382)
    at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processFormRequest(OAStackLayoutBean.java:370)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1027)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:993)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:848)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:382)
    at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1027)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:993)
    at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:848)
    at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:382)
    at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363)
    at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:2863)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1840)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:538)
    at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:426)
    at jtfcrmchrome.jspService(_jtfcrmchrome.java:1191)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
    at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
    at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
    at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
    at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    Caused by: oracle.xdo.parser.v2.XMLParseException: Start of root element expected.
    at oracle.xdo.parser.v2.XMLError.flushErrors1(XMLError.java:337)
    at oracle.xdo.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:343)
    at oracle.xdo.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:285)
    at oracle.xdo.parser.v2.XMLParser.parse(XMLParser.java:289)
    ... 56 more
    The XML is generated from the code and is as below:
    <ShippingLabelVO>
    <ShippingLabelVORow>
    <RowKey>1</RowKey>
    <ShipSentToAddr>XXX Repair Center 125 Technology Parkway Austin, TX</ShipSentToAddr>
    <SerialNum>BC104</SerialNum>
    <OrderNum>8000324</OrderNum>
    <ItemNum>MX7AM-170540</ItemNum>
    </ShippingLabelVORow>
    </ShippingLabelVO>
    I can successfully create the PDF from the desktop using the above XML. When I add the XML file to sample XML (in data definition), I can see the output when I choose Preview.
    But, this is not working from the code.
    Any pointers?
    Thanks,
    Ashish

    Hi,
    We are currently on R12.XDO.B.1 (5.6.3?) Is there a patch we'll need to apply on top of this?
    Is there a workaround for this?
    Thanks,
    Ashish

Maybe you are looking for