Error Starting XL Reporter - Unable to connect to SAP Business One DI API
Hi Experts,
I am getting the error message...
Unable to connect to SAP Business One DI API
[SAP Business One DI API]
Internal error (-8006) occurred [131-183]
...when trying to start XL Reporter on one client PC. Until today, it has been working OK.
What needs to be done?
Thanks
Greig
Hi Gordon,
I thought that might be the answer. Are there any set instructions for a 'clean' client uninstall?
Thanks
Greig
Similar Messages
-
XL Reporter error Unable to Connect to SAP Business One DI API
Hi Experts,
Im getting this error on one of our clients' workstations.
They have SAPB1 2005A PL 31.
We've tried uninstalling and reinstalling the DIAPI and the whole client application as well. Same error.
It als gives an error after the initial error that says:
"Security Settings in Microsoft Excel prohibit XL Reporter from running."
Any suggestions?
Thanks!hi jairus,
To fix this XLR error 'unable to connect to SAP Business One DI API', do the following:
1. Go to control panel and uninstall SAP DI API
2. Run %temp%
3. Rename the folder SM_OBS_DLL
4. Go to the patch level package of the patch level you are using and install DI API. If you get a message that the installation already exists, ignore the message and proceed to install DI API.
XLR should work properly.
Best Regards,
David -
Mensaje: Unable to connect to SAP Business One
SAP marca el siguiente error al abrir, estamos en SAP 8.8 SP0 PL 18 y desde el dia que se realizo la actualizacion a dicho parche a los usuarios les salen 2 ventanas que indican error, mas no hemos dado prioridad alta debido a que pese a que salen cada vez que ingresan a B1 no les ha causado conflicto al trabajar.
La primer ventana dice con titulo XL Reporter : Unable to connect to SAP Bussines One.
No se ha encontrado la clave de busqueda solicitada en ningun contexto de activación activa.
La segunda ventana con titulo Mensaje del sistema: No se puede realizar el upgrade del add-on. El archivo AddOnsLocalRegistration.sbo no coincide con los datos de la base de datos Common del add-on. Consulte SAP 1323680
De esta ventana esta claro lo que se sugiere en la nota de SAP pero hay un archivo que no hemos podido localizar de nombre "AddOnsLocalRegistration.sbo" aprovechando si alguien sabe en que carpeta se ubica se los agradecere.Ese fichero esta localizado en c:archivos de programasapsap business oneAddOnsLocalRegistration.sbo y hay otro que es AddOnsInstall.sbo
Estos ficheros contienen los Addon instalados. Deberías vaciarlos de contenido.
Editas el fichero con el notepad y en la primera línea debes dejar "" y borrar el resto de texto que hay.
Después deberías también borrar en el temporal del usuario la carpeta "SM_OBS_DLL", para esto tecleas en inicio - ejecutar - %temp% y lo localizas facilmente.
Cuando accedas de nuevo a SAP no detectará ningún addon instalado y forzará la desinstalación e instalación de los addon -
Unable to connect to SAP business one through web service
Hi
I'm facing some problem with my web service. I tried to connect to SAP but it gave me an "System.Exception"
Public Function ConnectedToDatabase() As Boolean
Try
Dim oCompany as SAPbobsCOM.Company
oCompany = New SAPbobsCOM.Company
Dim lRetCode, lErrCode As Long
Dim sErrMsg As String
sErrMsg = ""
Session("g_server") = System.Configuration.ConfigurationManager.AppSettings("Server")
Session("g_companyDB") = System.Configuration.ConfigurationManager.AppSettings("CompanyDB")
Session("g_DBUserName") = System.Configuration.ConfigurationManager.AppSettings("DbUsername")
Session("g_DBPassword") = System.Configuration.ConfigurationManager.AppSettings("DbPassword")
Session("g_Username") = System.Configuration.ConfigurationManager.AppSettings("Username")
Session("g_Password") = System.Configuration.ConfigurationManager.AppSettings("Password")
oCompany.Server = Session("g_server")
oCompany.CompanyDB = Session("g_companyDB")
oCompany.DbUserName = Session("g_DBUSerName")
oCompany.DbPassword = Session("g_DBPassword")
oCompany.UserName = Session("g_Username")
oCompany.Password = Session("g_Password")
oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English
lRetCode = oCompany.Connect()
When the codes runs to the line IRetCode = oCompany.Connect(), it will return an error code -8006. Those session got the correct information from the web.config. Then exception is throw in.
I try restarting my com and restarting my suite manager. Usually this will solve the problem. However, it won't for this time. I hope will receive some solutions for my problem. Thanks for your time.Hi,
Try To Set the db server type to MS SQL 2005 (value 4)
oCompany.DbServerType = BoDataServerTypes.dst_MSSQL2005
or
oCompany.DbServerType = 4
and
oCompany.UseTrusted = False
Regards,
János -
Wrong User name or Password while connecting from SAP Business One - PL26
I have restored my database on the server.I am using Patch Level PL26
I am getting an error while logging to Server
Wrong username and password....Message [131-93]
Is it because i have not imported the Temporary Liscence.But when i work on my laptop, it doesnt give me an error with the same username and Password.
I have checked SAP B1 Suite Service Manager also......it is "ON".
Can you please give me an help on this issues, why is it giving this error
OR
Is there a problem in my SAP Business One Server installation
Steps i have followed to install the SAP Busines One Server
1 - PL26 - Packages - Server Tools - Setup
2 - SAPB1 - Packages - Server - Setup (Custom - Demo-India
3 - Client - setup
4 - PL26 - Packages - DIAPI - Setup
Not installed -
5 - Packages - Upgrader Common - Setup
Reason - I have been told that until and unless you import liscense, you cannot run Upgrader Common Setup.
Please if you can find out is this true ?
Is the problem coming because i have not run the Upgrader Common setup ?Hi Khimesra,
Could you please try the following:
1 - Firewall/antivirus disabled
2 - B1 uninstalled
3 - Net 1.1 installed
4 - B1 reinstalled
Please also refer to the following SAP notes:
546344 and 542690
Regards
Emanuel -
Unable to create new connection using SAP Business One
Hi all,
I am unable to make a connection using the new SAP Business One connetion provided with the 8.8 release of SAP Business One Crystal Report Integration Package.
There are no Companies available to select from. When I try to manually type in the company name, the logon fails. If I then press "Cancel", I get a message that Crystal reports encountered a problem and needs to close. The details of the error refers to the following DLL: crdb_b1.dll.
The connection is successful from another PC that only has the Client installed (and uses the License server on our server, which also contains the databases.)
I have a local installation with my own license server. I am not even able to connect to the database on my local PC.
Please can anyone explain why this isn't working?
Regards,
RikardHi Rikard,
You may get better help if you post your question to the Business One forum. I can' t move your post.
Thank you
Don -
DI-API Error Company Connect with SAP BUSINESS ONE 2004 - B 7.30.215
Hi,
I am using SAP BUSINESS ONE 2004 - B 7.30.215. But in the COM window of the Visual Studio.net is having only
SAPbobsCOM 6.2 and 6.5.
While executing the DI connecting program It is showing an error
the error is -2028 (without description)
I need to add any patches to connect to company?
help me..
Regards,
JayHi Jay,
Here's a post that also refers to the same question you asked.
Need Help in DIAPI
Is your problem with the connection? Have you tried to connect using the Data Transfer Workbench? Where do you get this error -2028? Please post your code so we can see what the problem is.
Adele -
Intermittent of error "ORA-12203: TNS:unable to connect to destination"
Hi,
One of my application (run 24 hours each day) face intermittent of error "ORA-12203: TNS:unable to connect to destination", any one face the same issue ? any solution for this ? The error may occur weekly, some time monthly, occur randomly.
My Oracle is 8i. Application and 8i run on different SUN machines.
Checked with my network engr and db admin, network traffic was not congested and db was not overloaded at the time of this error. CPU and memory also not overloaded.
regards,
johnvun98This error generally occurs when you listener at server is not working properly or at client you sqlnet.ora,tnsnames.ora (if using local names) file is not configured properly check both the files
-
Crystal Reports Dynamic Parameters with SAP Business One
Okay, I've got this very strange issue with dynamic parameters in Crystal Reports connected to SAP Business One.
Let's start with the software versions:
- Crystal Reports 12.3.0.601
- SAP Business One 8.8 (8.80.231) SP: 00 PL: 13
- Windows XP SP3
(SBO Server on Windows 2003 and SQL 2005)
What I'm about to describe is something I've tried in several reports and for which I created a very, very simple test report to see if it was reproducible in a very simple situation.
- I connected to a Business One server through CR's SBO connection type. Logon is successful, tables are shown.
- I pick OCRD and plac CardCode and CardName in the details section on the report. Previewing the report shows data.
- I create a dynamic parameter on CardCode and in the Select Expert I select the CardCode field and define that that should be equal to the parameter.
- I preview the report again. Now it asks me in such a parameter screen for logon credentials. It shows the server and database it tries to connect to and in the username it shows the SQL Server username I used to connect to the SQL Server in the first place. However, the password for that user is not accepted. I also tried to login with the Windows administrator user and with the SBO manager user, but no success with any attempt.
I also tried to add a static parameter and add all database values to the list. Same screen, different result:
Crystal Reports 2008 wrote:
Logon Failed.
Error in File UNKNOWN.RPT:
Unable to connect: incorrect log on parameters. (rptcontrollers.dll)
(On a side note: the report is saved as report1.rpt)
Anyone else got similar issues and found a solution?Hi,
When you have fixed your crystal installation following the note posted earlier, please take a look at the [how to guide|http://service.sap.com/sapidb/011000358700000882232009E.pdf] and also at the [e-learning|http://service.sap.com/sapidb/011000358700001370262010E] about SAP Business One 8.8 and Crystal Reports.
There are so called "tokens" which you need to use instead of dynamic parameters.
Dynamic paramters don't work in SAP Business One 8.8, if they are not defined as a static paramter with token.
Best regards,
Darius -
SAP Business one Login error?
Hi experts,
A customer was unable to login to SAP Business one. He gets the error,"Internal Error".
I uninstalled SAP and reinstalled it. He was able to login and work and after two days he can not login again.
He keeps having the same error.
He has been using SAP on his machine for a very long time without this error.
Urgent Help is needed.
Regards
JusticeHi,
1. There could be some network error.
2. start sap as right click run as administrator.Check whether error comes or not?
You can refer links as well :
https://helpdesk.coresystems.ch/entries/20781833-Internal-error-131-occurred-131-183-FAQ-10062-
Internal Error occurred when i log in sap b1 2007A
Thanks
Taruna -
Installation error of SAP Business One Client after server disconnection
Hello,
While installing the SAP Business One Client to my laptop, the SAP server network connection accidentally interrupted and my installation breaks off. I did cancel the setup and try to remove the SAP Business One DI API using uninstaller. After removing the corrupted application I tried to run again the setup.exe from the server but I got this error:
Previous version of SAP Business One DI API uninstallation failed:
sapserver\B1_SHR\Client\SAP DIAPI Installation\setup.exe
SAP Business One Client installation will be aborted.
I also tried to remove the registry files using some registry cleaner but still I got the error.
Encountered something like this before? Need some help, thanks in advance!
Regards,
RenHi All,
Sorry to re open this thread, but I am having a similar issue in attempting to upgrade a 2007 installation to 8.81.
When attempting the upgrade Server Tools, SDK, and even Client wont uninstall from either the upgrade process or manually from control panel.
I have conducted all the mentioned solutions as well as running registry cleaner all to no effect.
I have even attempted re installing the 2007 application but this returns a 1612 install shield error.
Any advice would be higher appreciated.
Matthew -
Error While Starting XL Reporter Addon on SAP Business One Server
Hi Everyone,
I have got the following error message while starting XL Reporter Addon on SAP Business One Server:-
1. "Unable to Connect SAP Business One, Connection string is not valid [66000-84]. The user is not licensed."
2. "Addon does not have a License"
while license is installed on this machine.Hi,
Try these below steps:
In Business One from the main menu go to Administration -> License -> License Administration.
Select the user you wish to connect to the XL reporter.
Assign the user the SAP AddOn License.
JimM -
XL REPORTER - Unable to connect to XL Reporter
Hello,
When I Try to start XL Reporter in a TSE Session on a MS Windows Server 2008 - 64 bits Machine,
I get the message :
Unable to connect to XL Reporter
Error ! Server Communication Failed
Cause : Error! Unable to get document
Type 36
I am on
SAP Business One 2007A PL 42
MS SQL Server 2005
MS Office 2003
Framework .NET : 1.0, 1.1, 2.0, 3.0, 3.5
Framework 64 .NET : 2.0, 3.0, 3.5
ConnectionManager in the folder
C:\Program Files (x86)\SAP\SAP Business One\AddOns\XLR\XLReporter
seems to be OK [but in fact, I get no acknowledge]
I have read some of this forums post
But saw no 64 bit issues
on a "similar" machine I have no problem
Anybody can suggest me another trick ?
A check list ?
Thanking you in advance.
JBI have the same problem connecting to XL reporter on client machines.
"Unable to connect to XL Reporter. Error! Server communication failed!"
The event log has the message:
The VB Application identified by the event source logged this Application XL Reporter: Thread ID: 3512 ,Logged: Server SQL
The connect information provided in MetaInfo.xml is wrong.
(Please contact the administrator to run ChangeDbPassword)
Details: IXAppServices (91)
Object variable or With block variable not set
SAPB1 2007A PL 49 running on Windows XP with all .Net Framework installations
SQL 2008 running on a Windows 2008 Server 64-bit
When I try to run the ConnectionMnager.exe I get the message "Invalid Logon Information".
Server Name, user and password are all OK. -
XL Reporter - Unable to connect to DI
Hi, i have SAP Business One 2004 2B with patch level 40. I have installed XL Reporter version 6.70.01.00 and i have updated to 6.70.02.02. But when i open SAP B One appears the follow message.
"Unable to connect to DI"
Any advise for me?
Thanks.
Rafael LimaYes, the DI API be installed at the client (PL40) but i cann't use data transfer workbench, appears the follow error.
"Connection to server has failed
Error Code: -2028"
Note: If i install DI (PL00) i can registered XL Reporter but i cann't starting and it not create item in the menu Tools.
Any advise for me?
Thanks.
Rafael -
BO 4.0 - Database error: Unable to connect to SAP BW Incomplete logon data
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
[http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers]
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Hi Simone,
Thank you for the reply.
Here are the things done by me.
1. Generated the keystore file and imported it in BI 4.0 CMC on SAP Authentication Option tab
([http://wiki.sdn.sap.com/wiki/display/BOBJ/GeneratekeystoreandcertificateforSAPBO+BI4.0])
([http://wiki.sdn.sap.com/wiki/display/BOBJ/SetupofSAPSSOServiceinSAPBOBI4.0+CMC])
2. Generate the certificate file cert.der and this cert is imported in SAP BW with STRUSTSSO2 transaction.
([http://wiki.sdn.sap.com/wiki/display/BOBJ/ImportSAPBOBI4.0certificateintoSAP+BW])
3. BW Roles/Users have been imported into CMC.
4. SAP Users and LDAP users are mapped/aliased with each other using the registry key method
([http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtomapSAPusersandLDAPusersinSBOBI4.0+CMC])
I haven't explicitly configured STS (Security token service) as STS is a part of Adaptive processing server (APS) and I have verified that by going to servers in CMC and then to analysis services.
I have searched for SAP OSS notes related to my issue but couldn't find any note related to SAP BW SSO with Business objects 4.0. Most of the notes are relevant for BO XI 3.1 environments.
Thanks & regards,
CD.
Maybe you are looking for
-
Disk Utilty does not work after update to OSX 10.8.4
I updated to OSX 10.8.4 on my Macbook pro and the update went smoothly. However when I try to run Disk Utility the utility never starts and the right click menu says it is not responding. I have to force quit.
-
Can I install 10.6 Snow Leopard to a New Empty Hard Drive?
I could use some help. *I simply want to boot off a 10.6 retail install DVD and install to an empty hard drive on my Mac Pro 8-core (it came with and currently runs 10.5).* I will be pulling my 10.5 hard drive (for back up), installing a new drive fo
-
Any way to convert PDF document in to Tiff format with inbuilt IBR features
Is there any way to convert PDF document in to Tiff format with inbuilt IBR features? In our Webcenter Portal app, we create the PDF document with the content of ADF pages and check it in UCM using RIDC api. There will some batch job which will retri
-
CS4 Locks up when building a preview/rendering
Im on Windows XP running CS4 and I get a problem with it 'locking up' whilst building a preview or rendering. It doesnt happen everytime, but enough to be a problem. I have tried 'purge all' thinking this would 'free up' things, but no luck. When I g
-
How reduce pop up ads without completely blocking pop-ups
All of a sudden ads pop up all over my browser. How can I stop this from happening. But I don't want to turn on block all plug-ins.