Error: Startup task doesn't exist. This is not a continuation after a restart

I want to try to install sharepoint 2013 on windows server 2008 r2 with sp1, but when I install the prerequistes, always restart again and again, I check the log file, found the below error:
2014-02-27 22:55:12 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-02-27 22:55:12 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-02-27 22:55:15 - Error: The tool was unable to install Application Server Role, Web Server (IIS) Role.
2014-02-27 22:55:15 - Last return code (0X3EC=1004)
2014-02-28 03:27:05 - Error: A pending restart blocks the installation
2014-02-28 04:45:03 - C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\SharePointServerPreparationToolStartup_0FF1CE14-0000-0000-0000-000000000000.cmd
2014-02-28 04:45:03 - Error: Startup task doesn't exist. This is not a continuation after a restart.
2014-02-28 04:45:03 - Locating the following command line arguments file:
2014-02-28 04:45:03 - C:\SP2013_Chery\2Installation\Sharepoint\PrerequisiteInstaller.Arguments.txt
2014-02-28 04:45:03 - Error: This file does not exist
Awen

Hi Awen,
According to your description, my understanding is that you got an error when you installed prerequisities for SharePoint 2013.
Please run the following command, compare the result:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regii -enable –i
Here is a similar post for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/37cc20db-6cc7-45e0-928c-9a1ddbdab2ae/the-tool-was-unable-to-install-application-server-role-web-server-iis-role?forum=sharepointadmin
In addition, there is a KB article about this issue, please take a look at:
http://support.microsoft.com/kb/2765260/en-us
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Similar Messages

  • ORA-01041: internal error. hostdef extension doesn't exist

    hi all,
    i am presently working on logical standby database
    but i am facing a problem from primary database
    " select * from V$ARCHIVE_DEST"
    LOG_ARCHIVE_DEST_1 valid
    LOG_ARCHIVE_DEST_2 ERROR ORA-01041: internal error. hostdef extension doesn't exist
    at present database not synchronizing
    please help
    in alert.log file at primary
    ARC9: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (1041)
    ARC9: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    PING[ARC9]: Error 1041 when pinging standby 'standby server'.
    Standby database is in running mode & well connected with network
    Vaibhav
    Edited by: Vaibhav Dixit on Oct 20, 2011 4:43 PM
    Edited by: Vaibhav Dixit on Oct 20, 2011 4:43 PM

    okkk
    thanks for reply
    i m also getting some problem in standby database in just 2-3 days
    error is ->
    ORA-03135: connection lost contact
    LOG_ARCHIVE_DEST_2 ERROR ORA-01041: internal error. hostdef extension doesn't exist
    then
    i have passed some command on primary db & now it's working but i don't know it's good for db or not
    ALTER SYSTEM SET log_archive_dest_state_2=’DEFER’ SCOPE=BOTH;
    ALTER SYSTEM SET log_archive_dest_state_2=’ENABLE’ SCOPE=BOTH;
    please give a idea to resolve this problem
    regards
    Vaibhav

  • Subcontracting Challan Error *showing error "The document doesn't exist"*

    Dear Gurus,
    When i run T-code j1ifq for quantity reconcilation for subcontracting challan .then i enter Mat. Doc(GRN document)  and fiscle year 2009 and run F8 it's
    showing error "The document doesn't exist" but it exist in system.How to resolve this problem pl provide needful method to solve this issue.
    Thanks
    Abhinav

    hi,
    have you typed the challan no or selected from the F4 list? please check that and the year of the challan document. then you should not have this error.

  • Cisco Aironet AIR-SAP2602I-E-K9 WAP -ERROR: VLAN 1000 doesn't exist on 'Radio1-802.11N 5GHZ' (see Services VLAN)

    Hey guys,
    I'm configuring my access points with two SSID's through the GUI. The first is a corporate SSID and the second a guest SSID. The corporate SSID needs to be attached to native VLAN 1000. The guest SSID needs to be attached to VLAN 1234. Both SSID's / VLAN's are to use WPAv2 AES CCMP with a PSK. Although I'm getting an error message indicating that my VLAN's don't exist on ‘Radio1-802.11N 5GHZ’ .  Here are steps I take from start to error...
    Create SSID’s with no security. CORP not to broadcast. Set CORP to use native VLAN 1000. Set guest to use VLAN1234.
    Within security encryption manager > Set encryption mode cipher to AES CCMP on both VLAN 1000 and VLAN1234.
    Within services > VLAN check that both VLAN’s have Radio0-802.11N 2.4GHZ and Radio1-802.11N 5GHZ selected. They do.
    Within Security > SSID Manager – set client authenticated key management to mandatory, enable WPA – WPAv2. Set pre-shared key. Hit apply > “ERROR: VLAN 1000 doesn’t exist on ‘Radio1-802.11N 5GHZ’ (see Services > VLAN).
    I get the same error for both SSID’s. Radio1-802.11N 5GHZ is "checked" against both VLAN's. Am I missing something? Both Radio0-802.11N 2.4GHZ and Radio1-802.11N 5GHZ are enable interfaces and are "up".
    I'm pretty customed to switch and router IOS although have absolutely no exposure to WAP CLI.
    Any assistance appreciated.

    I've resolved this myself. The GUI is basically terrible and very buggy. I used the CLI and was able to add WPA through the CLI.

  • System throwing error " ibase object doesn't exist"

    Dear Friends;
    in the transaction ib52 when im putting the component number and pressing enter the system is showing me the error
    "ibase objec doesn't exist" . Which means system not  allowing to search ibase using the component number.
    Please help.
    shibashish banerjee

    Dear Denis,
    When I'm putting the component and pressing enter the system should automatically display the ibase related to this component right?
    Instead of this the system is throwing me the error " ibase object does'nt exist" . which i feel is incorrect . As per me system should automatically show me ibase , when i enter the component number and press enter.
    I checked in ibib and ibin tables as well. No conclusion.
    Regards
    shibashish banerjee

  • BI Installer issue with message" Error: ABAP Backend doesn't exist in SLD

    Dear All
    Please help me to solve this issue, during the BI Installer the process get errors message
    "Error: ABAP Backend doesn't exist in SLD"
    Follwoing the oss Note 983156 - BI configuration w. Template Installer
    1.Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
    Please check in Home -> Technical Systems -> select type ABAP. This
    should have configuration of your ABAP (BI) system. yes the system already there.
    2, goto http://host:port/index.html ->Web Dynpro ->Content Administrator-> Check SLD Connection
    the connection is running well.
    Please any one can help me to solve this issue,
    Thanks and Best Regards,
    Chrisna

    Hi
    I found your question because I wanted the answer to it too.  I'm trying to connect my Java-only stack portal to my ABAP-only stack BI system using the template in NWA.  I get through all the steps up to the creation of the WebDynpro JCO RFC destinations then it fails saying "ABAP Backend doesn't exist in the SLD". 
    I've checked the SLD and the ABAP backend most definitely DOES exist in the SLD and the SLD is being updated by both the ABAP backend and the Java portal systems thus proving a valid connection exists between the SLD and both systems I'm trying to connect.
    I think I've solved it however.
    I always define a TCP alias equal to the SID for any SAP system I build and I try to make all connections to <sid>.<fully.qualified.domain.name>.  This separates, to a degree, the physical server from the SAP instance.
    I used this alias in the BI installation template but I noticed that the ABAP backend was listed as <SID> <hostname> in the SLD (not <SID> <sid alias>).  When I used the real hostname in the template it ran to completion.
    The other change I made, and it's possible that this was the real reason instead of the alias/hostname issue, was that I restarted the BI system before retrying.  I only did this because I was getting error messages saying there were too many active CPIC conversations and I couldn't find them to kill them off.
    Hope one or other of these things might help.
    Murray

  • Error message Address doesn't exist 24593 in t-code va01,va02,va03

    Hi Friends,
    After entering order in T-code va03 i get the error message Address doesn't exist 24593 .
    please guide
    thanks in advance,
    regards.
    Bhaskar

    Check your ship-to Party.
    Also read the S-note 865271

  • FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist

    I am applying patch PO RUP 22, after merging patch->10207297,11669329,7632187,9878808. However for 1 file -INVITPSB.pls, i am getting status running, but in the adorker log file shows ->
    AD Worker error:
    The following ORACLE error:
    ORA-03114: not connected to ORACLE
    occurred while executing the SQL statement:
    UPDATE fnd_install_processes
    SET skip_flag = ''
    WHERE worker_id = 1
    Error comitting pending transactions and closing Pro*C connection.
    The error is:
    FND-UT-CMT: ORA-01041: internal error. hostdef extension doesn't exist
    AD Worker is exiting with failure.
    Any ideas of what can be done?

    HI,
    Please check if solution in below metalink note helps:-
    Patch 4143498 Fails With ORA-01041,ORA-03114 Errors On Iscrf70b.Pls ORA-01041 [ID 340238.1]
    Thanks,
    JD

  • I rented a movie via Itunes on  my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. Will I still be charged?

    I rented a movie via Itunes on  my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. I have rebooted Itunes and resumed the download of the movie only to receive the same error code. Has the movie file been corrupted? Can I recover the rental even though the time has elapsed? Will I be charged?

    Did you figure this out?  I haven't rented a movie in this new iTunes yet and saw one tonight I wanted to rent.  Same fricken thing is happening to me.  I hate this new iTunes, and I really hate that there are problems like this....why the heck do they have to fix something that isn't broken and break it?  This just really stinks.

  • IDVD working till I installed 2TB ED. Keep getting message"There was an internal iDVD error during the last action. This is not a movie." Any help is appreciated.

    iMovie message "There was an internal iDVD error during the last action. This is not a movie." comes up after trying to create a movie to burn to iDVD. Recently added a 2TB external drive to free up memory from HD. iDVD was working fine till the ED was added. Can't burn DVDs anymore. Any suggestions on how to fix the problem?

    What  folders did you move to the EHD? Any of the basic Home folders?  What format is the EHD?  It should be OS X Extended (journaled).  Do you have any files that iDVD uses on the EHS, i.e. project files, media files?
    OT

  • Since I updated to firefox 3.6 I keep gettin multiple popup windows. This did not happen until after the update. The popups appear as regular windows so popup blockers can not stop them.

    Since I updated to firefox 3.6 I keep gettin multiple pop up windows. This did not happen until after the update. The pop ups appear as regular windows so pop up blockers can not stop them. Why has the new update made my laptop more vulnerable. updates are supposed to be improvements!
    == This happened ==
    Every time Firefox opened
    == as soon as I updated to ver 3.6

    Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged. 
    What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

  • ORA-01041: internal error. hostdef extension doesn't exist  in forms 10g

    While Compiling the forms 10g I'm getting this error, pls help me on this problem.

    Check this link... ORA-01041: internal error. Hostdef extension doesn't exist
    hope this helps

  • FPCOPARA ERROR. Address doesn't exist

    Hi Experts,
    When i want to print a welcomes letter i get the error Address doesn't exist. Does some know why this message appear and how to solve it?
    I've looked in the table ADRC en found out the the spefic address for that addressnumber is marked as a Maintenance object address.
    This specific number is not linked to the business partner in the table BUT021_FS. In this table I found that the BP is linked to another address number that have the same city, street, zip-code etc. as the one that mared as Maintenance object address but this is marked as Business partner (customer, supplier).
    Kind regards,
    R.L.Groener

    Hi,
    Most likely master data is incomplete. Run that program with the same variant online and set a break-point on 'message' statement to find out where the problem is.

  • When creating po, pop up error message 'address doesn't exist'.

    when creating po via me21n, when click delivery tab screen, pop up error message dialog box 'address doesn't exist T001 wsu20 00010'. message no is 'am010'. then i was forced to  exit transaction.
    ps: 'su20' is my plant, but in me21n, when selecting plant, i can see two 'su20', the diffrence is  International address version. why there is two same plant

    go into customizing and maintain an adress by clicking the envelope button in the detail to the plant. The adress in the customizing views itself is not sufficient.

  • Error message  "Address doesn't exist "

    Dear Experts,
    In ME23n, when i  give some purchase order and click on ADDRESS tab it is giving the error message  as  "'Address doesn't exist 51457447  4601225079"",  And when i check the address in ADRC table for the same vendor via ADRNR number it is providing the  address
    And also it displays the address in the smartform preview.
    But same is not populated in the ADDRESS tab.
    Anybody  help
    Regards,
    Venki....

    Venki,
    I once had exactly the same problem and message. It turned out that the error message was misleading..
    In my case, a (custom) function module was returning an exception WITHOUT specifying a message. Subsequently the calling program also returned an exception, and simply reported the last message sitting in the SYST structure.
    I recommend you set a breakpoint on the MESSAGE statement when debugging.
    cheers
    Paul Bakker

Maybe you are looking for