Error status 150 in R12

Dear Experts
I am using EBS R12. It was working fine until today when in order to use internet, i changed networking settings. I changed it to dhcp and then forgot to re- enter manual IP address. I started the database and application. The application raised errors mostly of status 150.
I logined as root and corrected network entries and then restarted network services successfully. But still it is giving same errors even i restarted the system.
All the Log files are showing following error
=================================================
09/16/10-21:38:40 :: adoacorectle.sh version 120.13
09/16/10-21:38:40 :: adoacorectle.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
09/16/10-21:38:40 :: adoacorectle.sh: starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
=================================================
opmn id=erp1.com:6200
no process or applications matched this request
09/16/10-21:38:41 :: adoacorectle.sh: exiting with status 150
=================================================
Can anybody tell me how to resolve this issue.
I have checked entries in hosts file.
Regards
AK

Hi;
I am using EBS R12. It was working fine until today when in order to use internet, i changed networking settings. I changed it to dhcp and then forgot to re- enter manual IP address. I started the database and application. The application raised errors mostly of status 150.
I logined as root and corrected network entries and then restarted network services successfully. But still it is giving same errors even i restarted the system.
All the Log files are showing following error
=================================================
09/16/10-21:38:40 :: adoacorectle.sh version 120.13
09/16/10-21:38:40 :: adoacorectle.sh: starting OPMN if it is not running
opmnctl: opmn is already running.
09/16/10-21:38:40 :: adoacorectle.sh: starting OPMN managed OACORE OC4J instance
opmnctl: starting opmn managed processes...
=================================================
opmn id=erp1.com:6200
no process or applications matched this request
09/16/10-21:38:41 :: adoacorectle.sh: exiting with status 150
=================================================If your IP has been changed i suggest follow below link and doc. This link is work for me
http://appslab.blogspot.com/2009/08/ip-address-change-on-existing-r12.html
How to change the IP Address on a R12 EBusiness Suite Installation [ID 554843.1]

Similar Messages

I can't open PSE. Get error message 150:30 and restarting computer doesn't help. Any suggestions?

I can't open PSE. Get error message 150:30 and restarting computer doesn't help. Any suggestions?

Please try out the instructions mentioned in this article.
Thanks!!

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I s

Have been using Lightroom on my Apple computer for years. Now, ever since upgrading to Apple's Yosemite operating system I get an error message (150:30) every time I try to open a lightroom file. Has anyone else experienced this problem? Also how do I subscribe to Adobe's Premium Support? Every time I've tried (through contact support) I just get taken on an unending loop.

I think we need a lot more information.
Exactly what does the message say?
Exactly what files are you trying to open?
Exactly how are you trying to open them (what menu command or button or mouse action or keyboard shortcut)?
And lastly, what version of Lightroom are you using?

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshpp onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a p

Hi, I got my Mac in 2009 with photoshop elements on it - it's recently been wiped, however before the process we put Photoshop onto a hard drive, we then copied it back over and it no longer works, I'm getting error code 150:30 and I'm being asked for a password... any ideas how to get it working again?

You can never, never migrate an installed copy of PSE. It's just too complex and you can't get to all the bits and bobs.
First you will have to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
which will not seem to do anything, but is necessary to break the links within PSE so that you can pitch the bits manually. Then you will have to go around, not only to applications, but also to your username>library>preferences and most importantly to the library at the top level of your hard drive>application support>adobe, and remove everything you can find. Spotlight will not help with this kind of search, so don't try that.
Then you can install PSE from scratch.

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

Hello,
When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
When I manually download the latest copy of itunes and double click to install it, it failes with :-
iTunes installer completed
The installer encountered errors before iTunes could be configured
Errors occured during installations. your system has not been modified
Please run the installer again. finish to exit
When I look at the event loggs I can see :-
Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
Many Thanks

Hello there, G-Oker.
The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

With PRE 8 when I try toExport & burn a DVD, I get error code 150:30

With PRE 8 when I try to Export & burn a DVD, I get error code 150:30
What is wrong?
Thanks, Tom
My Laptop is
Dell Studio 17 Laptop PCS17HN
Windows 7 Home Premium
Processor Intel® Core™ i7-720QM Quad Core Processor 1.6GHz
6GB, DDR3, 1333MHz, 2 DIMM
(2) 500 GB Dual SATA Hard Drive (7200rpm) - lots space available
1GB ATI Mobility Radeon™ HD 4650v + TV Tuner
17.3” HD+ (900p) Bright LED Display with TrueLife™ and Camera/Facial Recognition SW
Dell Wireless 365 Bluetooth Internal (2.1) [$20.00]
8X DVD+/-RW Dual Layer Drive8X DVD+/-RW Dual Layer Drive
+ Roxio Easy CD & DVD Burning - Enhanced Burn/Authoring
Soundblaster X-Fi Hi Def Audio - Software Enabled

Please work through the troubleshooting steps in the FAQs to the right of this forum.
http://forums.adobe.com/thread/415318?tstart=30
If you'll tell us in as much detail as possible the results of each step, we'll likely be able to diagnose your problem and recommend solutions.

SAP PI Message Cancellation Alert - Message does not have restartable error status

Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
Sudheer

Hi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

What does error message 150:30 in Photoshop Elements 8 mean?

I have adobe photoshop elements 8 and, out of the blue, I get a message stating that I need to reboot for it to work. I reboot and it still doesn't work. Then there is an Error message 150:30 exhibited on the page. Adobe is too irresponsible to simply tell me what the error message means or provide a list for it, at least one I can find so I thought I'd solicit the good graces of other for help since help from Adobe is simply a shakedown for money due to their negligence and failure to support their products.

What's your OS? If you are on a Mac then try this Adobe Official Solution:
<http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html>
Hope this gets you started.

Error code 150:30

When I try to open a picture I have created with Photoshop Elements 3, I get the error code 150:30. Restarting the computer doesn't help. It says my license has expired. Why is this happening? I have created book pages and I would like to continue my work.

mac:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
windows:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

Error status 150 in R12

Similar Messages

Maybe you are looking for