Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Similar Messages

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

Reporting Services Point status message errors.

My Reporting Services Point seems to work OK -all reports are available and run correctly both through the console and via the website. However, I am seeing the following warning in the SMS_SRS_REPORTING_POINT status messages every hour:
"The SQL Reporting Services datasource on Reporting point server "Databaseserver.contoso.com" is missing or has been changed outside of Configuration Manager. It will be rebuilt based on the RSP configuration."
Here's what I think is causing the issue, but I don't know how to solve it.
The reports database is on the same remote SQL server as my site database. Because these site systems were installed automatically through the SCCM installation process, they show up in the Servers and Site Systems Role without an intranet FQDN. However,
when I add the RSP to the database server, it creates a new entry because when manually adding site systems SCCM insists on automatically adding the intranet FQDN. So I now have two separate entries for the same server:
\\DBServer01 - component server, site database server, site system
\\DBServer01.contoso.com - component server, reporting services point, site system
Any thoughts on how to stop these errors?

Yes, I know this is an old post, but I’m trying to clean them up.
In the past when I have seen this, they will automatically clean themselves up after a few days. (aka up to a week later). Have it clean itself up yet?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Sending An Error Message as Status Message

Hi,
I have a selection screen which was (Object Oriented program ) defined through Function Group and calling via Function Module. when the transaction Starts with selection Screen and we have few buttons on the selection screen, when we enter data and we need to press F9 we are validating the data and we need to give an error message, i am doing same, but the error message was coming as pop-up, once i click on the pop-up it is getting out of the selection screen. but actual requirement was it has to stay
back on the selection screen.
Is there any way to give the error message as status message instead of
pop-up.
Thanks In Advance.
Regards
Nags

Hi,
We have an option to set this, the last button of the menu(button will be in multiple colors) , press that and select the settings, a pop up will open, there in one of the tab, you can select the option to display the mesage in the status bar
Regards
Sudheer

Display error message as as status message on the screen

Hi all,
How to display error message as as status message on the screen
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it leave the current transaction.
if i display success message and use display like 'E' it display the error message but if i save it save the transaction.
i cannot use leave to screen also because of subscreen. if i use leave to screen system display set screen not allowed in subscreen.
so i want to stop the processing or do not allow the transaction to complete on the message.

Hi
displaying error message like status message will help u?
try the below code
MESSAGE 'Error' TYPE 'E' DISPLAY LIKE 'S'.
cheers
shibu

SAP PI Message Cancellation Alert - Message does not have restartable error status

Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
Sudheer

Hi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

BPM Scenario: Message has error status on outbound side

Hi All,
        I am doing one BPM scenario. In my scenario i am collecting 12 different type of idocs in BPM and bundling these idocs and sending these to the 12 different files.
        If i send 12 idocs from the R/3 then my scenario is working perfectly fine. If i send less than the 12 idocs that time i am getting the error message as "Message has error status on outbound side" with red flag.
           Can you please explain what minght be the problem. I have already checked in SM58,SMQ1 and SMQ2.
Thanks & Regards,
Purushotham

Hi Nutan,
        I hv configured my scenario as follows
1. Start
2. Block ( Deadline and Control step for cancell the process)
   3. Fork(Necessary branches 12)
      4. Loop(12 loops)
          Under loop
          a. Receive Step
          b. Container Operation( For count)
          c. Container Operation(For append)
5. Fork( Necessary branches 12)
    6. Transformation
    7. Send
8 Stop
This is my scenario. In the first Fork step i am checking end condition as total number of idocs is reached then i am sending all the data to the target system. If the idocs are not reaching with in 1 hour then i am cancelling the process.
        Now can you please tell me what is the problem.
Thanks & Regards,
Purushotham

Message has Error status on outbound side - in ABAP inbound proxy !!

Hi All,
One interesting question for you guys. I have got one of the scenarios like File to ABAP inbound proxy. Message are going properly, no errors in receiving system. But on PI moni I can able in "outbound status" column in red colored flag. No all the messages couple of them with u201CMessage has Error status on outbound side ". Why please?
Regards
San

Hi ,
Please check whether the correct data is coming from sender side . and check the j2ee engine runtime parameters.
Cheers,
Meera
Edited by: MeeravaliDudekula on Oct 18, 2010 2:36 PM

Message has error status on outbd side

Hi,
I am doing File to IDoc scenario, in SXMB_MONI i am getting the following error "Message has error status on outbd side". I am not using BPM and this interface was working fine earlier .
Any clues!!!!!!!!!!
Regards
Swatantra

Hi Vijay,
Cross check whether you have done these:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps.
Regards.
Praveen

Message has Error Status Outbound Side

Hi All,
I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
Thanks,
Sudheer.

Hi,
Where are you find the Error and
> Process engine all steps completed Sucessfully and created Idocs in XI....
Can you explain in detail
Regards
Sangeetha

Message has error status on outbd. side (error in Moni)

Hello All,
Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
How to reslove the issue, please help me.
Thanks and regards,
Chinna

Hi
Please check the below i think your problem will solve
Hi,
Check whether IDoc was created:
1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
Check Whether IDoc is received by the Receiver:
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Thanks ,
Meeravali Dudekula

Message has a error status on outbound side

hi all
when iam doing bpm alert , in sxmb_moni iam getting the message
"message has a error status on outbound side" error flag is coming.
Regards
Raju

HI,
Check receiver agreement and reciever determination.
Regards,
AKshay.

Status message shows " Error in Process" in SRM

Hi,
At the time of Confirmation, status message shows " Error in Process " in SRM.
So please suggest the solution & the possible cause for the Error.
Thanks,
Neha

Pl goto RZ20, SAP Enterprise Buyer monitor--confirmation and open the alerts.
All error logs have to be there. How will you analyse otherwise as to what went wrong?
Have you done the partner profile settings for confirmation? Defined ports in SRM? Are you on classic/extended classic?
Nikhil

Error Status Message

Similar Messages

Maybe you are looking for